dmesg content

dmesg.txt (text/plain), 15.00 KB, created by Juan J. Prieto on 2007-03-20 10:23:34 UTC

<5>Linux version 2.6.19-hardened-r5-lince-2.2-nohimem (root@epi) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #20 SMP PREEMPT Mon Feb 12 18:38:24 CET 2007
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 0000000007f00000 (usable)
<4> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
<5>127MB LOWMEM available.
<6>found SMP MP-table at 000f46c0
<7>Entering add_active_range(0, 0, 32512) 0 entries of 256 used
<4>Zone PFN ranges:
<4>  DMA             0 ->     4096
<4>  Normal       4096 ->    32512
<4>early_node_map[1] active PFN ranges
<4>    0:        0 ->    32512
<7>On node 0 totalpages: 32512
<7>  DMA zone: 32 pages used for memmap
<7>  DMA zone: 0 pages reserved
<7>  DMA zone: 4064 pages, LIFO batch:0
<7>  Normal zone: 222 pages used for memmap
<7>  Normal zone: 28194 pages, LIFO batch:7
<6>DMI 2.3 present.
<3>ACPI: Unable to locate RSDP
<6>Intel MultiProcessor Specification v1.4
<6>    Virtual Wire compatibility mode.
<6>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
<4>Processor #0 6:9 APIC version 17
<6>I/O APIC #2 Version 17 at 0xFEC00000.
<4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
<6>Processors: 1
<4>Allocating PCI resources starting at 10000000 (gap: 07f00000:f6d00000)
<4>Detected 599.965 MHz processor.
<4>Built 1 zonelists.  Total pages: 32258
<5>Kernel command line: console=ttyS0,19200 BOOT_IMAGE=linux initrd=initrd.lrp syst_size=56M log_size=24M init=/linuxrc rw root=/dev/ram0 boot=/dev/hdc1:msdos PKGPATH=/dev/hdc1 noirqdebug ata_piix.force_pcs=1
<6>IRQ lockup detection disabled
<7>mapped APIC to ffffd000 (fee00000)
<7>mapped IOAPIC to ffffc000 (fec00000)
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
<4>PID hash table entries: 512 (order: 9, 2048 bytes)
<4>Console: colour VGA+ 80x25
<4>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
<6>Memory: 121756k/130048k available (3185k kernel code, 7744k reserved, 552k data, 280k init, 0k highmem)
<4>virtual kernel memory layout:
<4>    fixmap  : 0xfffb6000 - 0xfffff000   ( 292 kB)
<4>    vmalloc : 0xc8800000 - 0xfffb4000   ( 887 MB)
<4>    lowmem  : 0xc0000000 - 0xc7f00000   ( 127 MB)
<4>      .init : 0xc0105000 - 0xc014b000   ( 280 kB)
<4>      .data : 0xc04f4000 - 0xc057e000   ( 552 kB)
<4>      .text : 0xc014b000 - 0xc0467443   (3185 kB)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay using timer specific routine.. 1201.01 BogoMIPS (lpj=2402038)
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: a7e9fbbf 00000000 00000000 00000000 00000000 00000000 00000000
<6>CPU: L1 I cache: 32K, L1 D cache: 32K
<7>CPU: After all inits, caps: a7e9f3bf 00000000 00000000 00000040 00000000 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>Checking 'hlt' instruction... OK.
<6>Checking for popad bug... OK.
<6>SMP alternatives: switching to UP code
<6>Freeing SMP alternatives: 16k freed
<4>CPU0: Intel(R) Celeron(R) processor            600MHz stepping 05
<6>Total of 1 processors activated (1201.01 BogoMIPS).
<4>ExtINT not setup in hardware but reported by MP table
<4>ENABLING IO-APIC IRQs
<6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
<6>Brought up 1 CPUs
<6>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
<6>Freeing initrd memory: 1616k freed
<6>NET: Registered protocol family 16
<6>PCI: Using configuration type 1
<4>Setting up standard PCI resources
<6>ACPI: Interpreter disabled.
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI: disabled
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>pci_get_subsys() called while pci_devices is still empty
<5>SCSI subsystem initialized
<7>libata version 2.00 loaded.
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<4>PCI: Probing PCI hardware
<7>PCI: Probing PCI hardware (bus 00)
<7>Boot video device is 0000:00:02.0
<4>* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
<4>* this clock source is slow. If you are sure your timer does not have
<4>* this bug, please use "acpi_pm_good" to disable the workaround
<4>PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
<4>PCI quirk: region 0480-04bf claimed by ICH4 GPIO
<6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
<6>PCI: Transparent bridge - 0000:00:1e.0
<6>PCI: Using IRQ router PIIX/ICH [8086/24c0] at 0000:00:1f.0
<6>PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 16
<6>PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 16
<6>PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 19
<6>PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 18
<6>PCI->APIC IRQ transform: 0000:00:1d.7[D] -> IRQ 23
<6>PCI->APIC IRQ transform: 0000:00:1f.1[A] -> IRQ 16
<6>PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 17
<6>PCI->APIC IRQ transform: 0000:01:05.0[A] -> IRQ 20
<6>PCI->APIC IRQ transform: 0000:01:06.0[A] -> IRQ 21
<6>PCI->APIC IRQ transform: 0000:01:07.0[A] -> IRQ 22
<6>PCI->APIC IRQ transform: 0000:01:09.0[A] -> IRQ 23
<4>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
<6>PCI: Bridge: 0000:00:1e.0
<6>  IO window: disabled.
<6>  MEM window: e8000000-e80fffff
<6>  PREFETCH window: 10000000-100fffff
<7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<4>TCP established hash table entries: 4096 (order: 3, 49152 bytes)
<4>TCP bind hash table entries: 2048 (order: 2, 24576 bytes)
<6>TCP: Hash tables configured (established 4096 bind 2048)
<6>TCP reno registered
<6>Machine check exception polling timer started.
<6>audit: initializing netlink socket (disabled)
<5>audit(1174336122.196:1): initialized
<6>io scheduler noop registered
<6>io scheduler anticipatory registered (default)
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<6>HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
<6>N_HDLC line discipline registered.
<6>Linux agpgart interface v0.101 (c) Dave Jones
<6>agpgart: Detected an Intel 855 Chipset.
<6>agpgart: Detected 892K stolen memory.
<6>agpgart: AGP aperture is 128M @ 0xd8000000
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>pcnet32.c:v1.33 27.Jun.2006 [e-mail]
<6>PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>ICH4: IDE controller at PCI slot 0000:00:1f.1
<6>ICH4: chipset revision 2
<6>ICH4: not 100% native mode: will probe irqs later
<6>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
<6>    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
<7>Probing IDE interface ide0...
<7>Probing IDE interface ide1...
<4>hdc: Hitachi XXM2.3.0, CFA DISK drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<7>Probing IDE interface ide0...
<6>hdc: max request size: 128KiB
<6>hdc: 250368 sectors (128 MB) w/1KiB Cache, CHS=978/8/32
<6> hdc: hdc1
<4>Loading Adaptec I2O RAID: Version 2.4 Build 5go
<6>Detecting Adaptec I2O RAID controllers...
<6>Adaptec aacraid driver (1.1-5[2409]-mh2)
<5>usbmon: debugfs is not available
<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
<7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
<6>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe8200000
<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 6 ports detected
<7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
<6>USB Universal Host Controller Interface driver v3.0
<7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
<6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ed00
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
<6>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
<6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
<6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e900
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>usbcore: registered new interface driver usbkbd
<6>drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
<6>PNP: No PS/2 controller found. Probing ports directly.
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>mice: PS/2 mouse device common for all mice
<6>md: linear personality registered for level -1
<6>md: raid0 personality registered for level 0
<6>md: raid1 personality registered for level 1
<6>md: multipath personality registered for level -4
<6>device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: [e-mail]
<6>device-mapper: multipath: version 1.0.5 loaded
<6>device-mapper: multipath round-robin: version 1.0.0 loaded
<6>device-mapper: multipath emc: version 0.0.3 loaded
<6>netem: version 1.2
<4>u32 classifier
<4>Netfilter messages via NETLINK v0.30.
<4>ip_conntrack version 2.4 (1016 buckets, 8128 max) - 240 bytes per conntrack
<4>ctnetlink v0.90: registering with nfnetlink.
<4>ip_conntrack_pptp version 3.1 loaded
<4>ip_nat_pptp version 3.0 loaded
<4>ip_tables: (C) 2000-2006 Netfilter Core Team
<4>ipt_time loading
<5>ClusterIP Version 0.8 loaded successfully
<4>arp_tables: (C) 2002 David S. Miller
<6>TCP cubic registered
<6>Initializing XFRM netlink socket
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<5>Bridge firewalling registered
<5>Ebtables v2.0 registered
<6>802.1Q VLAN Support v1.8 Ben Greear <[e-mail]>
<6>All bugs added by David S. Miller <[e-mail]>
<4>Using IPI Shortcut mode
<6>md: Autodetecting RAID arrays.
<6>Time: tsc clocksource has been installed.
<6>md: autorun ...
<6>md: ... autorun DONE.
<5>RAMDISK: Compressed image found at block 0
<4>VFS: Mounted root (minix filesystem).
<6>Freeing unused kernel memory: 280k freed
<4>cloop: Initializing cloop v2.05
<6>cloop: loaded (max 8 devices)
<6>natsemi dp8381x driver, version 2.1, Sept 11, 2006
<6>  originally by Donald Becker <[e-mail]>
<6>  http://www.scyld.com/network/natsemi.html
<6>  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
<6>Silicom PXBPI/PXTBI Network Driver - version 7.3.15.silc.5.26-NAPI
<6>Copyright (c) 2004-2006 Silicom.
<6>e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
<6>e100: Copyright(c) 1999-2006 Intel Corporation
<6>Intel(R) PRO/1000 Network Driver - version 7.2.9-k4-NAPI
<6>Copyright (c) 1999-2006 Intel Corporation.
<6>b44.c:v1.01 (Jun 16, 2006)
<6>eth0: Broadcom 4400 10/100BaseT Ethernet 00:02:b6:34:22:c7
<6>eth1: Broadcom 4400 10/100BaseT Ethernet 00:02:b6:34:22:c8
<6>eth2: Broadcom 4400 10/100BaseT Ethernet 00:02:b6:34:22:c9
<6>eth3: Broadcom 4400 10/100BaseT Ethernet 00:02:b6:34:22:ca
<6>IPP2P v0.8.2 loading
<6>HP CISS Driver (v 3.6.10)
<6>Fusion MPT base driver 3.04.02
<6>Copyright (c) 1999-2005 LSI Logic Corporation
<6>Fusion MPT SPI Host driver 3.04.02
<6>Fusion MPT SAS Host driver 3.04.02
<6>megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006
<6>device eth0 entered promiscuous mode
<5>audit(1174336139.813:2): dev=eth0 prom=256 old_prom=0 auid=4294967295
<6>device eth1 entered promiscuous mode
<5>audit(1174336139.889:3): dev=eth1 prom=256 old_prom=0 auid=4294967295
<4>HTB: quantum of class 10002 is big. Consider r2q change.
<4>HTB: quantum of class 10003 is big. Consider r2q change.
<4>HTB: quantum of class 10002 is big. Consider r2q change.
<4>HTB: quantum of class 10003 is big. Consider r2q change.
<4>physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is deprecated and breaks other things, it will be removed in January 2007. See Documentation/feature-removal-schedule.txt for details. This doesn't affect you in case you're using it for purely bridged traffic.