lilo.conf

lilo.conf (text/plain), 1.20 KB, created by Balint Dobai-Pataky on 2007-01-10 19:41:37 UTC

# Faster, but won't work on all systems:
#compact
# Should work for most systems, and do not have the sector limit:
lba32
# If lba32 do not work, use linear:
#linear

# MBR to install LILO to:
boot = /dev/sda
map = /boot/.map

# Here you can select the secondary loader to install.  A few
# examples is:
#
#    boot-text.b
#    boot-menu.b
#    boot-bmp.b
#
install = /boot/boot-menu.b   # Note that for lilo-22.5.5 or later you
                              # do not need boot-{text,menu,bmp}.b in
                              # /boot, as they are linked into the lilo
                              # binary.

menu-scheme=Wb
#prompt
# If you always want to see the prompt with a 15 second timeout:
#timeout=150
delay = 5
# Normal VGA console
vga = normal
# VESA console with size 1024x768x16:
#vga = 791

#
# End LILO global section
#

#
# Linux bootable partition config begins
#
root = /dev/md0
default = Gentoo64

image = /boot/linux-2.6.18-gentoo-r3
	label = Gentoo64-old
	read-only # read-only for checking

image = /boot/linux-2.6.19-gentoo-r2
	label = Gentoo64	
	read-only # read-only for checking
#	append = "agp=off  noapic"
	# acpi=off " mem=nopentium
	
	#"pci=biosirq" "pci=noacpi"
other = /dev/sdb4
  label=sdb4