[patch] libata patch for 2.6.18-r1

libata.patch (text/plain), 3.21 KB, created by Sebastiaan on 2006-12-06 07:15:24 UTC

--- linuxorg/drivers/scsi/libata-core.c	2006-12-06 15:30:33.000000000 +0100
+++ linux/drivers/scsi/libata-core.c	2006-12-06 15:48:11.000000000 +0100
@@ -2271,11 +2271,14 @@
  *	Sleep until ATA Status register bit BSY clears,
  *	or a timeout occurs.
  *
- *	LOCKING: None.
+ *     LOCKING:
+ *     Kernel thread context (may sleep).
+ *
+ *     RETURNS:
+ *     0 on success, -errno otherwise.
  */
-
-unsigned int ata_busy_sleep (struct ata_port *ap,
-			     unsigned long tmout_pat, unsigned long tmout)
+int ata_busy_sleep(struct ata_port *ap,
+                  unsigned long tmout_pat, unsigned long tmout)
 {
 	unsigned long timer_start, timeout;
 	u8 status;
@@ -2283,25 +2286,29 @@
 	status = ata_busy_wait(ap, ATA_BUSY, 300);
 	timer_start = jiffies;
 	timeout = timer_start + tmout_pat;
-	while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) {
+        while (status != 0xff && (status & ATA_BUSY) &&
+               time_before(jiffies, timeout)) {
 		msleep(50);
 		status = ata_busy_wait(ap, ATA_BUSY, 3);
 	}
 
-	if (status & ATA_BUSY)
+        if (status != 0xff && (status & ATA_BUSY))
 		ata_port_printk(ap, KERN_WARNING,
 				"port is slow to respond, please be patient\n");
 
 	timeout = timer_start + tmout;
-	while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) {
-		msleep(50);
+	while (status != 0xff && (status & ATA_BUSY) &&
+	       time_before(jiffies, timeout)) {
 		status = ata_chk_status(ap);
 	}
 
+        if (status == 0xff)
+               return -ENODEV;
+
 	if (status & ATA_BUSY) {
 		ata_port_printk(ap, KERN_ERR, "port failed to respond "
 				"(%lu secs)\n", tmout / HZ);
-		return 1;
+		return -EBUSY;
 	}
 
 	return 0;
@@ -2392,10 +2399,8 @@
 	 * the bus shows 0xFF because the odd clown forgets the D7
 	 * pulldown resistor.
 	 */
-	if (ata_check_status(ap) == 0xFF) {
-		ata_port_printk(ap, KERN_ERR, "SRST failed (status 0xFF)\n");
-		return AC_ERR_OTHER;
-	}
+        if (ata_check_status(ap) == 0xFF)
+               return 0;
 
 	ata_bus_post_reset(ap, devmask);
 
--- linuxorg/include/linux/libata.h	2006-12-06 15:30:39.000000000 +0100
+++ linux/include/linux/libata.h	2006-12-06 15:38:59.000000000 +0100
@@ -703,9 +703,8 @@
 				pm_message_t mesg);
 extern void ata_host_set_resume(struct ata_host_set *host_set);
 extern int ata_ratelimit(void);
-extern unsigned int ata_busy_sleep(struct ata_port *ap,
-				   unsigned long timeout_pat,
-				   unsigned long timeout);
+extern int ata_busy_sleep(struct ata_port *ap,
+                         unsigned long timeout_pat, unsigned long timeout);
 extern void ata_port_queue_task(struct ata_port *ap, void (*fn)(void *),
 				void *data, unsigned long delay);
 extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val,
@@ -1020,8 +1019,7 @@
 		udelay(10);
 		status = ata_chk_status(ap);
 		max--;
-	} while ((status & bits) && (max > 0));
-
+        } while (status != 0xff && (status & bits) && (max > 0));
 	return status;
 }
 
@@ -1041,7 +1039,7 @@
 {
 	u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
 
-	if (status & (ATA_BUSY | ATA_DRQ)) {
+	if (status != 0xff && (status & (ATA_BUSY | ATA_DRQ))) {
 		unsigned long l = ap->ioaddr.status_addr;
 		if (ata_msg_warn(ap))
 			printk(KERN_WARNING "ATA: abnormal status 0x%X on port 0x%lX\n",