dmesg, 2.6.16-9, right after boot

dma_dmesg.txt (text/plain), 15.13 KB, created by Onkobu on 2006-11-20 04:02:03 UTC

00000-e7ffffff
PCI: Setting latency timer of device 0000:00:08.0 to 64
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14 <[e-mail]>
audit: initializing netlink socket (disabled)
audit(1164022996.841:1): initialized
Installing knfsd (copyright (C) 1996 [e-mail]).
NTFS driver 2.1.26 [Flags: R/W].
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
lp: driver loaded but no devices found
Real Time Clock Driver v1.12ac
vesafb: NVIDIA Corporation, NV18 Board - 64d18nz , Chip Rev A2 (OEM: NVIDIA)
vesafb: VBE version: 3.0
vesafb: VBIOS/hardware supports DDC2 transfers
vesafb: monitor limits: vf = 75 Hz, hf = 83 kHz, clk = 170 MHz
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 128x48
vesafb: framebuffer at 0xe4000000, mapped to 0xe0880000, using 24576k, total 65536k
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb1: VGA16 VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
mice: PS/2 mouse device common for all mice
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.49.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 16
PCI: Setting latency timer of device 0000:00:04.0 to 64
input: AT Translated Set 2 keyboard as /class/input/input0
eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET: Registered protocol family 24
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
8139cp: pci dev 0000:01:06.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 17
eth1: RealTek RTL8139 at 0x9000, 00:50:fc:f8:72:11, IRQ 17
eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
hda: AOPEN CD-RW CRW4852 1.00 20030123, ATAPI CD/DVD-ROM drive
hdb: PHILIPS DVDR1660P1, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Maxtor 6Y120P0, ATA DISK drive
hdd: SAMSUNG SP1203N, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 128KiB
hdc: Host Protected Area detected.
	current capacity is 240119615 sectors (122941 MB)
	native  capacity is 240121728 sectors (122942 MB)
hdc: Host Protected Area disabled.
hdc: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133)
hdc: cache flushes supported
 hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 hdc7 hdc8 >
hdd: max request size: 512KiB
hdd: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hdd: cache flushes supported
 hdd: hdd1
hda: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
libata version 1.20 loaded.
usbmon: debugfs is not available
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new driver mdc800
drivers/usb/image/mdc800.c: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
usbcore: registered new driver microtekX6
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04 08:57:20 2006 UTC).
no UART detected at 0x1
usbcore: registered new driver snd-usb-audio
usbcore: registered new driver snd-usb-usx2y
ALSA device list:
  No soundcards found.
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 5, 131072 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
IPv4 over IPv4 tunneling driver
ip_conntrack version 2.4 (4095 buckets, 32760 max) - 232 bytes per conntrack
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices: 
HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI 
ACPI: (supports S0 S1 S4 S5)
ReiserFS: hdc3: found reiserfs format "3.6" with standard journal
ReiserFS: hdc3: using ordered data mode
ReiserFS: hdc3: journal params: device hdc3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdc3: checking transaction log (hdc3)
ReiserFS: hdc3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 208k freed
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 21 (level, high) -> IRQ 18
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: irq 18, io mem 0xec005000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, high) -> IRQ 19
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 19, io mem 0xec003000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 22 (level, high) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 16, io mem 0xec004000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
realtime: exports duplicate symbol cap_netlink_send (owned by commoncap)
Capability LSM initialized
IT8212: IDE controller at PCI slot 0000:01:07.0
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 20
IT8212: chipset revision 17
it821x: controller in smart mode.
IT8212: 100% native mode on irq 20
    ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdg:pio, hdh:pio
Probing IDE interface ide2...
hdf: HDT722520DLAT80, ATA DISK drive
hdf: Performing identify fixups.
ide2 at 0x9400-0x9407,0x9802 on irq 20
hdf: max request size: 128KiB
hdf: 390721968 sectors (200049 MB) w/7674KiB Cache, CHS=24321/255/63, BUG
 hdf:hdf: recal_intr: status=0x51 { DriveReady SeekComplete Error }
hdf: recal_intr: error=0x04 { DriveStatusError }
ide: failed opcode was: unknown
 hdf1 hdf2 hdf3 hdf4
Probing IDE interface ide3...
realtime: exports duplicate symbol cap_netlink_send (owned by commoncap)
ReiserFS: hdc5: found reiserfs format "3.6" with standard journal
ReiserFS: hdc5: using ordered data mode
ReiserFS: hdc5: journal params: device hdc5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdc5: checking transaction log (hdc5)
ReiserFS: hdc5: Using r5 hash to sort names
ReiserFS: hdc6: found reiserfs format "3.6" with standard journal
ReiserFS: hdc6: using ordered data mode
ReiserFS: hdc6: journal params: device hdc6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdc6: checking transaction log (hdc6)
ReiserFS: hdc6: Using r5 hash to sort names
ReiserFS: hdc7: found reiserfs format "3.6" with standard journal
ReiserFS: hdc7: using ordered data mode
ReiserFS: hdc7: journal params: device hdc7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdc7: checking transaction log (hdc7)
ReiserFS: hdc7: Using r5 hash to sort names
ReiserFS: hdc8: found reiserfs format "3.6" with standard journal
ReiserFS: hdc8: using ordered data mode
ReiserFS: hdc8: journal params: device hdc8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdc8: checking transaction log (hdc8)
ReiserFS: hdc8: Using r5 hash to sort names
ReiserFS: hdd1: found reiserfs format "3.6" with standard journal
ReiserFS: hdd1: using ordered data mode
ReiserFS: hdd1: journal params: device hdd1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdd1: checking transaction log (hdd1)
ReiserFS: hdd1: Using r5 hash to sort names
ReiserFS: hdf1: found reiserfs format "3.6" with standard journal
ReiserFS: hdf1: using ordered data mode
ReiserFS: hdf1: journal params: device hdf1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdf1: checking transaction log (hdf1)
ReiserFS: hdf1: Using r5 hash to sort names
ReiserFS: hdf2: found reiserfs format "3.6" with standard journal
ReiserFS: hdf2: using ordered data mode
ReiserFS: hdf2: journal params: device hdf2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdf2: checking transaction log (hdf2)
ReiserFS: hdf2: Using r5 hash to sort names
ReiserFS: hdf3: found reiserfs format "3.6" with standard journal
ReiserFS: hdf3: using ordered data mode
ReiserFS: hdf3: journal params: device hdf3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdf3: checking transaction log (hdf3)
ReiserFS: hdf3: Using r5 hash to sort names
subfs 0.9
Adding 1953496k swap on /dev/hdc2.  Priority:-1 extents:1 across:1953496k
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 21
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 17
eth0: no link during initialization.
eth1: link down
Linux agpgart interface v0.101 (c) Dave Jones
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 20
NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-8776  Mon Oct 16 21:56:04 PDT 2006
i2c_adapter i2c-0: adapter [NVIDIA I2C Device] registered
i2c_adapter i2c-1: adapter [NVIDIA I2C Device] registered
i2c_adapter i2c-2: adapter [NVIDIA I2C Device] registered
process `named' is using obsolete setsockopt SO_BSDCOMPAT
ip_tables: (C) 2000-2006 Netfilter Core Team
i2c_adapter i2c-3: adapter [SMBus nForce2 adapter at 5000] registered
i2c_adapter i2c-3: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-4: adapter [SMBus nForce2 adapter at 5500] registered
i2c_adapter i2c-4: nForce2 SMBus adapter at 0x5500
i2c-core: driver [asb100] registered
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x2d
i2c_adapter i2c-3: SMBus Timeout! (0x10)
i2c_adapter i2c-4: found normal entry for adapter 4, addr 0x2d
i2c_adapter i2c-4: client [asb100] registered with bus id 4-002d
i2c_adapter i2c-4: client [asb100 subclient] registered with bus id 4-0049
i2c_adapter i2c-4: client [asb100 subclient] registered with bus id 4-0048
i2c-core: driver [w83l785ts] registered
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x2e
i2c_adapter i2c-3: SMBus Timeout! (0x10)
i2c_adapter i2c-4: found normal entry for adapter 4, addr 0x2e
i2c_adapter i2c-4: client [w83l785ts] registered with bus id 4-002e
i2c-core: driver [eeprom] registered
i2c_adapter i2c-0: SMBus Quick command not supported, can't probe for chips
i2c_adapter i2c-1: SMBus Quick command not supported, can't probe for chips
i2c_adapter i2c-2: SMBus Quick command not supported, can't probe for chips
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x50
i2c_adapter i2c-3: SMBus Timeout! (0x10)
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x51
i2c_adapter i2c-3: client [eeprom] registered with bus id 3-0051
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x52
i2c_adapter i2c-3: client [eeprom] registered with bus id 3-0052
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x53
i2c_adapter i2c-3: SMBus Timeout! (0x10)
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x54
i2c_adapter i2c-3: SMBus Timeout! (0x10)
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x55
i2c_adapter i2c-3: SMBus Timeout! (0x10)
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x56
i2c_adapter i2c-3: SMBus Timeout! (0x10)
i2c_adapter i2c-3: found normal entry for adapter 3, addr 0x57
i2c_adapter i2c-3: SMBus Timeout! (0x10)
i2c_adapter i2c-4: found normal entry for adapter 4, addr 0x50
i2c_adapter i2c-4: SMBus Timeout! (0x10)
i2c_adapter i2c-4: found normal entry for adapter 4, addr 0x51
i2c_adapter i2c-4: SMBus Timeout! (0x10)
i2c_adapter i2c-4: found normal entry for adapter 4, addr 0x52
i2c_adapter i2c-4: SMBus Timeout! (0x10)
i2c_adapter i2c-4: found normal entry for adapter 4, addr 0x53
i2c_adapter i2c-4: SMBus Timeout! (0x10)
i2c_adapter i2c-4: found normal entry for adapter 4, addr 0x54
i2c_adapter i2c-4: SMBus Timeout! (0x10)
i2c_adapter i2c-4: found normal entry for adapter 4, addr 0x55
i2c_adapter i2c-4: SMBus Timeout! (0x10)
i2c_adapter i2c-4: found normal entry for adapter 4, addr 0x56
i2c_adapter i2c-4: SMBus Timeout! (0x10)
i2c_adapter i2c-4: found normal entry for adapter 4, addr 0x57
i2c_adapter i2c-4: SMBus Timeout! (0x10)
i2c_adapter i2c-4: SMBus Timeout! (0x10)