new pptpd.conf from 1.1.4_beta2

pptpd.conf (text/plain), 1.69 KB, created by Ross Dougherty on 2003-04-04 02:57:19 UTC

################################################################################
#
# Sample PoPToP configuration file
#
# for PoPToP version 1.1.4-b2
#
################################################################################

# TAG: speed
#
#	Specifies the speed for the PPP daemon to talk at.
#
#speed 115200

# TAG: option
#
#	Specifies the location of the PPP options file.
#	By default PPP looks in '/etc/ppp/options'
#
#option /etc/ppp/options.pptpd

# TAG: stimeout
#
#	Specifies timeout (in seconds) on starting ctrl connection
#
# stimeout 10

# TAG: debug
#
#	Turns on (more) debugging to syslog
#
#debug

# TAG: bcrelay <if>
#
#	Turns on broadcast relay to clients from interface <if>
#	Not yet implemented this way. Read README.bcrelay
#
#bcrelay eth1

# TAG: localip
# TAG: remoteip
#
#	Specifies the local and remote IP address ranges.
#
#	You can specify single IP addresses seperated by commas or you can
#	specify ranges, or both. For example:
#
#		192.168.0.234,192.168.0.245-249,192.168.0.254
#
#	IMPORTANT RESTRICTIONS:
#
#	1. No spaces are permitted between commas or within addresses.
#
#	2. If you give more IP addresses than MAX_CONNECTIONS, it will
#	   start at the beginning of the list and go until it gets 
#	   MAX_CONNECTIONS IPs. Others will be ignored.
#
#	3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
#	   you must type 234-238 if you mean this.
#
#	4. If you give a single localIP, that's ok - all local IPs will
#	   be set to the given one. You MUST still give at least one remote
#	   IP for each simultaneous client.
#
#localip 192.168.0.1
#remoteip 192.168.0.234-238,192.168.0.245
# or
#localip 192.168.0.234-238,192.168.0.245
#remoteip 192.168.1.234-238,192.168.1.245