usb 2-2: device descriptor read/8, error -71 hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004 hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004 uhci_hcd 0000:00:1d.1: port 2 portsc 0082,00 hub 2-0:1.0: port 2, status 0100, change 0001, 12 Mb/s hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004 uhci_hcd 0000:00:1d.1: port 2 portsc 01a3,00 hub 2-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 usb 2-2: new low speed USB device using uhci_hcd and address 26 nommu_map_single: overflow 12ab29c00+8 of device mask ffffffff nommu_map_single: overflow 12a5c3380+64 of device mask ffffffff nommu_map_single: overflow 12ab29c00+8 of device mask ffffffff nommu_map_single: overflow 12a5c3380+64 of device mask ffffffff nommu_map_single: overflow 12ab29c00+8 of device mask ffffffff nommu_map_single: overflow 12a5c3380+64 of device mask ffffffff
Created attachment 96218 [details] 2.6.17-r7 .config
Extra usb debug output: usb 2-2: device descriptor read/8, error -71 usb 2-2: new low speed USB device using uhci_hcd and address 79 nommu_map_single: overflow 11bdaf6a0+8 of device mask ffffffff nommu_map_single: overflow 11bdafee0+8 of device mask ffffffff nommu_map_single: overflow 11bdaf6a0+8 of device mask ffffffff uhci_hcd 0000:00:1d.1: uhci_result_control: failed with status 440000 [ffff8100cfea7540] link (cfea7422) element (cfea6050) urb_priv [ffff81011fd33140] urb [ffff81012940c5c0] qh [ffff8100cfea7540] Dev=79 EP=0(IN) CTL 1: [ffff8100cfea6050] link (cfea60a0) e0 LS Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4f, PID=2d(SETUP) (buf=00000000) 2: [ffff8100cfea60a0] link (cfea60f0) e3 SPD LS Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=4f, PID=69(IN) (buf=00000000) 3: [ffff8100cfea60f0] link (cfea6140) e3 LS IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4f, PID=e1(OUT) (buf=00000000) Dummy TD [ffff8100cfea6140] link (cfea6050) e0 Length=0 MaxLen=7ff DT0 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000) usb 2-2: device descriptor read/8, error -71 nommu_map_single: overflow 11bdafee0+8 of device mask ffffffff nommu_map_single: overflow 11bdaf6a0+8 of device mask ffffffff uhci_hcd 0000:00:1d.1: uhci_result_control: failed with status 440000 [ffff8100cfea7540] link (cfea7422) element (cfea6140) urb_priv [ffff81011fd33140] urb [ffff81012940c5c0] qh [ffff8100cfea7540] Dev=79 EP=0(IN) CTL 1: [ffff8100cfea6140] link (cfea6050) e0 LS Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4f, PID=2d(SETUP) (buf=00000000) 2: [ffff8100cfea6050] link (cfea60a0) e3 SPD LS Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=4f, PID=69(IN) (buf=00000000) 3: [ffff8100cfea60a0] link (cfea60f0) e3 LS IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4f, PID=e1(OUT) (buf=00000000) Dummy TD [ffff8100cfea60f0] link (cfea6140) e0 Length=0 MaxLen=7ff DT0 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000)
# uname -a Linux nms 2.6.17-gentoo-r7 #1 SMP Wed Sep 6 12:45:27 PDT 2006 x86_64 Intel(R) Xeon(R) CPU 5160 @ 3.00GHz GNU/Linux
Currently running the latest stable udev(sys-fs/udev-087-r1) and baselayout(sys-apps/baselayout-1.12.4-r7)
I've tried disabling ehci support, the same error occurs with just uhci enabled. There are no ohci devices.
This happens with both usb keyboards and mice, both which worked while booted to the 2006.1 livecd.(I ssh into the box now while trying to fix the error)
# lspci -v |grep -i usb 00:1d.0 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 09) (prog-if 00 [UHCI]) 00:1d.1 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 09) (prog-if 00 [UHCI]) 00:1d.2 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 (rev 09) (prog-if 00 [UHCI]) 00:1d.7 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 09) (prog-if 20 [EHCI])
Enabling IEEE under networking support seems to have fixed the issue. Nothing else in kernel was changed and the error no longer occurs.