Home | Docs | Forums | Lists | Bugs | Planet | Store | GMN | Get Gentoo!

Full Text Bug Listing

Ok, I've waited 3 days this time.  :)
As I'm running 2.6.20 and need it to run on my EPIA EX board,
I can't go back to 2.6.19 for this system.  I'll wait patiently
for a 0.10.0 ebuild of ivtv.  Thanks!

Please pretty please I need this too!

ZOMG ZOMG ZOMG!!! IT'S NOT IN PORTAGE YET!

lol,  you guys are great.  I'll get it this week, once I get mplayer-bin
fixxored. :)

It's a new version, works across three different kernels and it has new tools. 
It needs some TLC before I just throw it in there, and I wanna make sure
everything workie good.

ebuild is in the tree, but p.masked since the firmware wont load with a 2.6.20
kernel and the cx2584x chip

For notice - I currently run media-tv/ivtv-0.10.0 on an amd64 box with
gentoo-sources-2.6.19-r5 and a WinTV PVC 250. If the frequency is switched
during playback, the sound no longer works. If playback is stoped (stop reading
from /dev/video0) and the frequency is switched, sound still works.

I'm testing ivtv-0.10.0 because I had problems with ivtv-0.9.1, which did fail
to load the msp3400 module. I had to load the msp3400 before the ivtv-module,
then it worked. So far my experience with 2.6.19-r5 and ivtv. I cannot
guarantee that the origin of the problems isn't caused by myself. I can offer
to some more tests and/or provide more information, if desired.

Modifying this to be 0.10.1 version bump.

Um...trying to read through the eclasses and the 0.10.1 ebuild,
shouldn't the ebuild be calling linux-mod_pkg_postinst?
I unmasked ivtv-0.10.1 and got modules in .../extra, but
depmod wasn't run.

Firmware loads fine here with a cx25840 chip and a sufficiently new
gentoo-sources (>=2.6.20-r1) (see the gentoo-sources Changelog). No ebuild
modifications, just unmasked ivtv-0.10.1.

Relevant log:

ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.10.1 (tagged release) loading
ivtv:  Linux version: 2.6.20-gentoo-r2 SMP preempt mod_unload PENTIUM4
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt 0000:05:05.0[A] -> GSI 17 (level, low) -> IRQ 22
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
i2c_adapter i2c-1: Client creation failed at 0x44 (-1)
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
tveeprom 1-0050: Hauppauge model 26552, rev C268, serial# 7758992
tveeprom 1-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: audio processor is CX25843 (idx 37)
tveeprom 1-0050: decoder processor is CX25843 (idx 30)
tveeprom 1-0050: has radio, has no IR receiver, has no IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-150
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
ivtv0: Registered device radio0 for encoder radio
tuner 1-0061: type set to 47 (LG NTSC (TAPE series))
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv:  ====================  END INIT IVTV  ====================

Dunno if you all are looking for it to load on all 2.6.20 series, or just
gentoo-sources, but there you have it.

(In reply to comment #7)
> Um...trying to read through the eclasses and the 0.10.1 ebuild,
> shouldn't the ebuild be calling linux-mod_pkg_postinst?
> I unmasked ivtv-0.10.1 and got modules in .../extra, but
> depmod wasn't run.
> 

Fixed too, and unmasked since 2.6.20.2 is patched.

Steve,
Great work!  Thanks.