Home | Docs | Forums | Lists | Bugs | Planet | Store | GMN | Get Gentoo!

Full Text Bug Listing

Viewing gerber files with gerbv gives corrupted display, i.e. 
width lines are drawn as very small (one pixel) lines.
Same error was recently reported at debian buglist:

http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=374131

Best regards

Stefan Salewski

Building gerbv-1.0.1.tar.gz with default options (./comfigure; make) gives
a working version of gerbv:

 stefan@localhost ~/gv/gerbv-1.0.1 $ ldd src/gerbv
        libgtk-1.2.so.0 => /usr/lib/libgtk-1.2.so.0 (0x00002b140b48a000)
        libgdk-1.2.so.0 => /usr/lib/libgdk-1.2.so.0 (0x00002b140b701000)
        libgmodule-1.2.so.0 => /usr/lib/libgmodule-1.2.so.0
(0x00002b140b83f000)
        libglib-1.2.so.0 => /usr/lib/libglib-1.2.so.0 (0x00002b140b942000)
        libXi.so.6 => /usr/lib/libXi.so.6 (0x00002b140ba6c000)
        libXext.so.6 => /usr/lib/libXext.so.6 (0x00002b140bb75000)
        libX11.so.6 => /usr/lib/libX11.so.6 (0x00002b140bc86000)
        libm.so.6 => /lib/libm.so.6 (0x00002b140be67000)
        libgdk_pixbuf.so.2 => /usr/lib/libgdk_pixbuf.so.2 (0x00002b140bfc0000)
        libpng12.so.0 => /usr/lib/libpng12.so.0 (0x00002b140c0d9000)
        libz.so.1 => /lib/libz.so.1 (0x00002b140c200000)
        libc.so.6 => /lib/libc.so.6 (0x00002b140c315000)
        libdl.so.2 => /lib/libdl.so.2 (0x00002b140c53e000)
        /lib64/ld-linux-x86-64.so.2 (0x00002b140b372000)

Building with option --enable-gtk2 (./configure --enable-gtk2; make)
gives progam version with draws gerber files not correct:

stefan@localhost ~/gv/gerbv-1.0.1 $ ldd src/gerbv
        libgtk-x11-2.0.so.0 => /usr/lib/libgtk-x11-2.0.so.0
(0x00002b832f81d000)
        libgdk-x11-2.0.so.0 => /usr/lib/libgdk-x11-2.0.so.0
(0x00002b832fc43000)
        libatk-1.0.so.0 => /usr/lib/libatk-1.0.so.0 (0x00002b832fdd5000)
        libgdk_pixbuf-2.0.so.0 => /usr/lib/libgdk_pixbuf-2.0.so.0
(0x00002b832fef4000)
        libm.so.6 => /lib/libm.so.6 (0x00002b833000b000)
        libpangocairo-1.0.so.0 => /usr/lib/libpangocairo-1.0.so.0
(0x00002b8330164000)
        libpango-1.0.so.0 => /usr/lib/libpango-1.0.so.0 (0x00002b833026b000)
        libcairo.so.2 => /usr/lib/libcairo.so.2 (0x00002b83303a9000)
        libgobject-2.0.so.0 => /usr/lib/libgobject-2.0.so.0
(0x00002b83304f9000)
        libgmodule-2.0.so.0 => /usr/lib/libgmodule-2.0.so.0
(0x00002b8330638000)
        libdl.so.2 => /lib/libdl.so.2 (0x00002b833073b000)
        libglib-2.0.so.0 => /usr/lib/libglib-2.0.so.0 (0x00002b833083f000)
        libpng12.so.0 => /usr/lib/libpng12.so.0 (0x00002b83309cb000)
        libz.so.1 => /lib/libz.so.1 (0x00002b8330af2000)
        libc.so.6 => /lib/libc.so.6 (0x00002b8330c07000)
        libX11.so.6 => /usr/lib/libX11.so.6 (0x00002b8330e30000)
        libXrender.so.1 => /usr/lib/libXrender.so.1 (0x00002b8331011000)
        libXrandr.so.2 => /usr/lib/libXrandr.so.2 (0x00002b833111b000)
        libXi.so.6 => /usr/lib/libXi.so.6 (0x00002b833121e000)
        libfontconfig.so.1 => /usr/lib/libfontconfig.so.1 (0x00002b8331326000)
        libXcursor.so.1 => /usr/lib/libXcursor.so.1 (0x00002b833145a000)
        libXext.so.6 => /usr/lib/libXext.so.6 (0x00002b8331564000)
        libXfixes.so.3 => /usr/lib/libXfixes.so.3 (0x00002b8331675000)
        libpangoft2-1.0.so.0 => /usr/lib64/libpangoft2-1.0.so.0
(0x00002b833177b000)
        libfreetype.so.6 => /usr/lib64/libfreetype.so.6 (0x00002b83318a3000)
        /lib64/ld-linux-x86-64.so.2 (0x00002b832f705000)
        libexpat.so.0 => /usr/lib64/libexpat.so.0 (0x00002b8331a36000)

Since a few days gerbv-1.0.2.tar.gz is available at
http://gerbv.sourceforge.net/

Works fine with default build options on my 64 bit AMD64 box:

stefan@localhost ~/gv/gerbv-1.0.2/src $ ldd ./gerbv
        libgtk-x11-2.0.so.0 => /usr/lib/libgtk-x11-2.0.so.0
(0x00002ac754553000)
        libgdk-x11-2.0.so.0 => /usr/lib/libgdk-x11-2.0.so.0
(0x00002ac754979000)
        libatk-1.0.so.0 => /usr/lib/libatk-1.0.so.0 (0x00002ac754b0b000)
        libgdk_pixbuf-2.0.so.0 => /usr/lib/libgdk_pixbuf-2.0.so.0
(0x00002ac754c2a000)
        libm.so.6 => /lib/libm.so.6 (0x00002ac754d41000)
        libpangocairo-1.0.so.0 => /usr/lib/libpangocairo-1.0.so.0
(0x00002ac754e9a000)
        libpango-1.0.so.0 => /usr/lib/libpango-1.0.so.0 (0x00002ac754fa1000)
        libcairo.so.2 => /usr/lib/libcairo.so.2 (0x00002ac7550df000)
        libgobject-2.0.so.0 => /usr/lib/libgobject-2.0.so.0
(0x00002ac75522f000)
        libgmodule-2.0.so.0 => /usr/lib/libgmodule-2.0.so.0
(0x00002ac75536e000)
        libdl.so.2 => /lib/libdl.so.2 (0x00002ac755471000)
        libglib-2.0.so.0 => /usr/lib/libglib-2.0.so.0 (0x00002ac755575000)
        libpng12.so.0 => /usr/lib/libpng12.so.0 (0x00002ac755701000)
        libz.so.1 => /lib/libz.so.1 (0x00002ac755828000)
        libc.so.6 => /lib/libc.so.6 (0x00002ac75593d000)
        libX11.so.6 => /usr/lib/libX11.so.6 (0x00002ac755b66000)
        libXrender.so.1 => /usr/lib/libXrender.so.1 (0x00002ac755d47000)
        libXrandr.so.2 => /usr/lib/libXrandr.so.2 (0x00002ac755e51000)
        libXi.so.6 => /usr/lib/libXi.so.6 (0x00002ac755f54000)
        libfontconfig.so.1 => /usr/lib/libfontconfig.so.1 (0x00002ac75605c000)
        libXcursor.so.1 => /usr/lib/libXcursor.so.1 (0x00002ac756190000)
        libXext.so.6 => /usr/lib/libXext.so.6 (0x00002ac75629a000)
        libXfixes.so.3 => /usr/lib/libXfixes.so.3 (0x00002ac7563ab000)
        libpangoft2-1.0.so.0 => /usr/lib64/libpangoft2-1.0.so.0
(0x00002ac7564b1000)
        libfreetype.so.6 => /usr/lib64/libfreetype.so.6 (0x00002ac7565d9000)
        /lib64/ld-linux-x86-64.so.2 (0x00002ac75443b000)
        libexpat.so.0 => /usr/lib64/libexpat.so.0 (0x00002ac75676c000)

(In reply to comment #2)
> Since a few days gerbv-1.0.2.tar.gz is available at
> http://gerbv.sourceforge.net/

So you're saying it (1.0.2) works correctly?

(In reply to comment #3)
> (In reply to comment #2)
> > Since a few days gerbv-1.0.2.tar.gz is available at
> > http://gerbv.sourceforge.net/
> 
> So you're saying it (1.0.2) works correctly?
> 

Yes.
I installed gerbv-1.0.2.tar.gz in a local directory and executed commands
"./configure" and "make" to build it with default options. Resulting executable
draws my gerber files correctly.

> Yes.
> I installed gerbv-1.0.2.tar.gz in a local directory and executed commands
> "./configure" and "make" to build it with default options. Resulting executable
> draws my gerber files correctly.
> 

That's good news! I've got correct drawings with both versions. 

gerbv-1.0.2 ebuild in bug #142733.

Lucas Chiesa

I've tested gerbv-1.0.2 in a machine where 1.0.1 failed, and it didn't.

I suggest adding gerbv-1.0.2 to portage as soon as possible to close this bug.

Lucas Chiesa

(In reply to comment #6)
> I've tested gerbv-1.0.2 in a machine where 1.0.1 failed, and it didn't.
> 
> I suggest adding gerbv-1.0.2 to portage as soon as possible to close this bug.

In CVS, thanks!

*** Bug 142733 has been marked as a duplicate of this bug. ***