Linux version 2.6.16-rc1 (root@otherland) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #1 PREEMPT Sat Jan 21 13:03:17 CET 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data) BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000fb860 On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 32752 pages, LIFO batch:7 DMI 2.3 present. ACPI: RSDP (v000 AMI ) @ 0x000fa600 ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x3fff0000 ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x3fff0030 ACPI: MADT (v001 AMIINT 0x00000009 MSFT 0x00000097) @ 0x3fff00c0 ACPI: DSDT (v001 VIA VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:4 APIC version 16 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Built 1 zonelists Kernel command line: root=/dev/hda3 video=radeonfb:1280x1024-32@60 splash=verbose,fadein,theme:NewLinux quiet CONSOLE=/dev/tty1 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 1199.925 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1034820k/1048512k available (2051k kernel code, 13096k reserved, 587k data, 176k init, 131008k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 2402.18 BogoMIPS (lpj=1201091) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0183fbff c1c7fbff 00000000 00000020 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. mtrr: v2.0 (20020519) CPU: AMD Athlon(tm) Processor stepping 02 Checking 'hlt' instruction... OK. ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfdb11, last bus=1 PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 *12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 9 devices PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: 9000-9fff MEM window: dfe00000-dfefffff PREFETCH window: bfc00000-dfcfffff PCI: Setting latency timer of device 0000:00:01.0 to 64 highmem bounce pool size: 64 pages Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 radeonfb: Found Intel x86 BIOS ROM Image radeonfb: Retrieved PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=240.00 Mhz, System=166.00 MHz radeonfb: PLL min 20000 max 40000 radeonfb: Monitor 1 type CRT found radeonfb: EDID probed radeonfb: Monitor 2 type no found Console: switching to colour frame buffer device 160x64 radeonfb (0000:01:00.0): ATI Radeon Y` Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA KT266/KY266x/KT333 chipset agpgart: AGP aperture is 32M @ 0xe0000000 [drm] Initialized drm 1.0.1 20051102 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 0) is a 16550A 00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:02: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 0 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci0000:00:11.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: ST340014A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: PHILIPS DVDR824P, ATAPI CD/DVD-ROM drive hdd: PLEXTOR CD-R PX-W1210A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode ACPI wakeup devices: PCI0 UAR1 USB USB1 USB2 AC9 MC9 ILAN SLPB ACPI: (supports S0 S1 S4 S5) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found ReiserFS: hda3: found reiserfs format "3.6" with standard journal input: AT Translated Set 2 keyboard as /class/input/input0 ReiserFS: hda3: using ordered data mode ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda3: checking transaction log (hda3) ReiserFS: hda3: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 176k freed Adding 514072k swap on /dev/hda2. Priority:-1 extents:1 across:514072k Machine check exception polling timer started. ACPI: Processor [CPU1] (supports 16 throttling states) ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Sleep Button (CM) [SLPB] Capability LSM initialized via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 17 PCI: Via IRQ fixup for 0000:00:08.0, from 12 to 1 eth0: VIA Rhine II at 0xdfffff00, 00:50:ba:e4:9e:ba, IRQ 17. eth0: MII PHY found at address 8, status 0x782d advertising 01e1 Link 45e1. NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Via IRQ fixup for 0000:00:09.0, from 11 to 0 uhci_hcd 0000:00:09.0: UHCI Host Controller uhci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:09.0: irq 16, io base 0x0000e000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:09.1[B] -> GSI 17 (level, low) -> IRQ 18 PCI: Via IRQ fixup for 0000:00:09.1, from 5 to 2 uhci_hcd 0000:00:09.1: UHCI Host Controller uhci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:09.1: irq 18, io base 0x0000e400 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:11.2[D] -> GSI 12 (level, low) -> IRQ 12 uhci_hcd 0000:00:11.2: UHCI Host Controller uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:11.2: irq 12, io base 0x0000d000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:11.3[D] -> GSI 12 (level, low) -> IRQ 12 uhci_hcd 0000:00:11.3: UHCI Host Controller uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:11.3: irq 12, io base 0x0000d400 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:11.4[D] -> GSI 12 (level, low) -> IRQ 12 uhci_hcd 0000:00:11.4: UHCI Host Controller uhci_hcd 0000:00:11.4: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:11.4: irq 12, io base 0x0000d800 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:09.2[C] -> GSI 18 (level, low) -> IRQ 19 PCI: Via IRQ fixup for 0000:00:09.2, from 10 to 3 ehci_hcd 0000:00:09.2: EHCI Host Controller ehci_hcd 0000:00:09.2: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:09.2: irq 19, io mem 0xdffffe00 ehci_hcd 0000:00:09.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 4 ports detected hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice hub 3-1:1.0: USB hub found hub 3-1:1.0: 4 ports detected usb 3-2: new full speed USB device using uhci_hcd and address 3 usb 3-2: configuration #1 chosen from 1 choice hub 3-2:1.0: USB hub found hub 3-2:1.0: 4 ports detected usb 4-1: new full speed USB device using uhci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice usb 3-1.2: new low speed USB device using uhci_hcd and address 4 usb 3-1.2: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev SCSI subsystem initialized Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning input: Microsoft Microsoft IntelliMouse® Explorer as /class/input/input1 input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:11.2-1.2 usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Vendor: USB2.0 Model: CardReader CF RW Rev: 0.0> Type: Direct-Access ANSI SCSI revision: 00 usb-storage: device scan complete sd 0:0:0:0: Attached scsi removable disk sda ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:11.5 to 64 usbcore: registered new driver snd-usb-audio hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hdd: drive_cmd: error=0x04 { AbortedCommand } ide: failed opcode was: 0xec Device not ready. Make sure there is a disc in the drive. Device not ready. Make sure there is a disc in the drive. eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 eth0: no IPv6 routers present slab: double free detected in cache 'vm_area_struct', objp f72c73d8 ------------[ cut here ]------------ kernel BUG at mm/slab.c:2701! invalid opcode: 0000 [#1] PREEMPT Modules linked in: snd_seq snd_pcm_oss snd_mixer_oss snd_usb_audio snd_usb_lib snd_hwdep snd_via82xx snd_ac97_codec snd_ac97_bus snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore sd_mod ext2 mbcache usb_storage scsi_mod usbhid vfat fat ide_cd cdrom ehci_hcd uhci_hcd usbcore ipv6 via_rhine mii capability commoncap button fan thermal processor non_fatal CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00210096 (2.6.16-rc1) EIP is at free_block+0xbd/0x180 eax: 00000047 ebx: f72c7000 ecx: c034ee6c edx: c034ee6c esi: c18ddd60 edi: 00000008 ebp: f72c701c esp: d4747eb8 ds: 007b es: 007b ss: 0068 Process sh (pid: 8989, threadinfo=d4746000 task=ea1250b0) Stack: <0>c031ac14 c0317bed f72c73d8 00200202 f72c73d8 00000002 c18de7cc c18dc820 f764b504 00000010 c015e9a3 c18dc820 c18da610 00000010 00000000 c18da610 c18ddd60 c18da600 c18dc820 f764b504 00200282 c015ecbb c18dc820 c18da600 Call Trace: [] cache_flusharray+0x73/0x170 [] kmem_cache_free+0x7b/0x80 [] remove_vma+0x5c/0x80 [] remove_vma+0x5c/0x80 [] exit_mmap+0xd8/0x110 [] mmput+0x37/0xb0 [] do_exit+0xf3/0x460 [] do_group_exit+0x34/0xa0 [] sysenter_past_esp+0x54/0x75 Code: 00 00 8d 6b 1c 83 7c bd 00 fe 74 27 8b 44 24 10 8b 54 24 2c 89 44 24 08 8b 42 48 c7 04 24 14 ac 31 c0 89 44 24 04 e8 c3 ea fb ff <0f> 0b 8d 0a 7d 9c 31 c0 8b 43 14 89 44 bd 00 89 7b 14 8b 4c 24 <1>Fixing recursive fault but reboot is needed! scheduling while atomic: sh/0x00000001/8989 [] schedule+0x588/0x670 [] show_stack_log_lvl+0xa8/0xe0 [] free_block+0xd2/0x180 [] do_exit+0x29d/0x460 [] printk+0x17/0x20 [] die+0x195/0x1a0 [] do_invalid_op+0x0/0xb0 [] do_invalid_op+0xa2/0xb0 [] free_block+0xbd/0x180 [] release_console_sem+0xcf/0xf0 [] vprintk+0x295/0x2b0 [] buffered_rmqueue+0xc3/0x230 [] error_code+0x4f/0x54 [] free_block+0xbd/0x180 [] cache_flusharray+0x73/0x170 [] kmem_cache_free+0x7b/0x80 [] remove_vma+0x5c/0x80 [] remove_vma+0x5c/0x80 [] exit_mmap+0xd8/0x110 [] mmput+0x37/0xb0 [] do_exit+0xf3/0x460 [] do_group_exit+0x34/0xa0 [] sysenter_past_esp+0x54/0x75 Unable to handle kernel paging request at virtual address 00100104 printing eip: c015e806 *pde = 00000000 Oops: 0002 [#2] PREEMPT Modules linked in: snd_seq snd_pcm_oss snd_mixer_oss snd_usb_audio snd_usb_lib snd_hwdep snd_via82xx snd_ac97_codec snd_ac97_bus snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore sd_mod ext2 mbcache usb_storage scsi_mod usbhid vfat fat ide_cd cdrom ehci_hcd uhci_hcd usbcore ipv6 via_rhine mii capability commoncap button fan thermal processor non_fatal CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00210082 (2.6.16-rc1) EIP is at free_block+0x56/0x180 eax: 00100100 ebx: f72c7000 ecx: 00000000 edx: 00200200 esi: c18ddd60 edi: 00000007 ebp: 00000000 esp: c1927e90 ds: 007b es: 007b ss: 0068 Process events/0 (pid: 4, threadinfo=c1926000 task=c1907a70) Stack: <0>c18dc780 f78dc060 00000007 00000000 f72c7248 00000000 c18da610 c18da600 00000007 00000000 c015f210 c18dc820 c18da610 00000007 00000000 c18dc820 c18ddd24 c18dc820 c18ddd60 00000001 c015f2f4 c18dc820 c18da600 00000000 Call Trace: [] drain_array_locked+0x80/0xd0 [] cache_reap+0x94/0x200 [] run_workqueue+0x92/0x130 [] cache_reap+0x0/0x200 [] worker_thread+0x158/0x180 [] default_wake_function+0x0/0x20 [] default_wake_function+0x0/0x20 [] worker_thread+0x0/0x180 [] kthread+0xb6/0xf0 [] kthread+0x0/0xf0 [] kernel_thread_helper+0x5/0x10 Code: 8b 4c 24 38 89 d0 89 54 24 10 05 00 00 00 40 c1 e8 0c c1 e0 05 03 05 10 7a 4d c0 8b 58 1c 8b 44 24 2c 8b 53 04 8b 74 88 14 8b 03 <89> 50 04 89 02 31 d2 c7 03 00 01 10 00 c7 43 04 00 02 20 00 8b <6>note: events/0[4] exited with preempt_count 1