diff -Naur grub-0.96.orig/INSTALL grub-0.96.reiser4/INSTALL
--- grub-0.96.orig/INSTALL	2004-06-13 19:47:29.000000000 +0200
+++ grub-0.96.reiser4/INSTALL	2005-10-25 15:53:30.000000000 +0200
@@ -207,6 +207,9 @@
 `--disable-reiserfs'
      Omit the ReiserFS support in Stage 2.
 
+`--disable-reiser4'
+     Omit the Reiser4 support in Stage 2.
+
 `--disable-vstafs'
      Omit the VSTa filesystem support in Stage 2.
 
diff -Naur grub-0.96.orig/config.h.in grub-0.96.reiser4/config.h.in
--- grub-0.96.orig/config.h.in	2005-01-30 02:08:37.000000000 +0100
+++ grub-0.96.reiser4/config.h.in	2005-10-25 15:53:30.000000000 +0200
@@ -27,9 +27,16 @@
 /* Define to 1 if you have the <inttypes.h> header file. */
 #undef HAVE_INTTYPES_H
 
+/* Define to 1 if you have the `aal-minimal' library (-laal-minimal). */
+#undef HAVE_LIBAAL_MINIMAL
+
 /* Define if you have a curses library */
 #undef HAVE_LIBCURSES
 
+/* Define to 1 if you have the `reiser4-minimal' library (-lreiser4-minimal).
+   */
+#undef HAVE_LIBREISER4_MINIMAL
+
 /* Define to 1 if you have the <memory.h> header file. */
 #undef HAVE_MEMORY_H
 
diff -Naur grub-0.96.orig/configure.ac grub-0.96.reiser4/configure.ac
--- grub-0.96.orig/configure.ac	2005-10-25 16:05:56.411074291 +0200
+++ grub-0.96.reiser4/configure.ac	2005-10-25 15:53:30.000000000 +0200
@@ -263,6 +263,77 @@
   FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_REISERFS=1"
 fi
 
+dnl Checking for reiser4
+REISER4_LIBS=""
+REISER4_CFLAGS=""
+
+OLD_LIBS=$LIBS
+OLD_CFLAGS=$CFLAGS
+LIBS=""
+CFLAGS=""
+
+AC_ARG_ENABLE(reiser4,
+  [  --disable-reiser4       disable Reiser4 support in Stage 2])
+
+if test x"$enable_reiser4" != xno; then
+  AC_CHECK_LIB(aal-minimal, aal_mem_init, , 
+    AC_MSG_WARN(
+Reiser4 support is disabled due to inability find libaal-minimal with 
+memory manager support turned on.)
+    enable_reiser4=no
+  )
+fi
+  
+if test x"$enable_reiser4" != xno; then
+  AC_CHECK_HEADER(aal/libaal.h, ,
+  AC_MSG_WARN(
+Libaal header files are not found. Reiser4 support is disabled
+  )
+  enable_reiser4=no)
+fi
+  
+if test x"$enable_reiser4" != xno; then
+  AC_CHECK_LIB(reiser4-minimal, reiser4_fs_open, , 
+  AC_MSG_WARN(
+Reiser4 support is disabled due to inability find valid libreiser4-minimal.)
+    enable_reiser4=no, 
+    -laal-minimal
+  )
+fi
+
+if test x"$enable_reiser4" != xno; then
+  AC_CHECK_HEADER(reiser4/libreiser4.h, ,
+  AC_MSG_WARN(
+Reiser4 header files are not found. Reiser4 support is disabled.
+  )
+  enable_reiser4=no)
+fi
+
+if test x"$enable_reiser4" != xno; then
+  REISER4_CFLAGS="$REISER4_CFLAGS -DFSYS_REISER4=1"
+  REISER4_LIBS=$LIBS
+fi
+
+if test x"$enable_reiser4" != xno; then
+  AC_CHECK_LIB(reiser4-minimal, __sym40_plug_init, 
+    REISER4_CFLAGS="$REISER4_CFLAGS -DENABLE_SYMLINKS=1",
+AC_MSG_WARN(Reiser4 symlinks support is disabled.), 
+    -laal-minimal
+  )
+fi
+
+LIBS=$OLD_LIBS
+CFLAGS=$OLD_CFLAGS
+
+if test x"$enable_reiser4" != xno; then
+  enable_reiser4_support=yes
+  FSYS_CFLAGS="$FSYS_CFLAGS $REISER4_CFLAGS"
+fi
+
+AC_SUBST(REISER4_LIBS)
+AC_SUBST(REISER4_CFLAGS)
+AM_CONDITIONAL(ENABLE_REISER4_SUPPORT, test x"$enable_reiser4" != xno)
+
 AC_ARG_ENABLE(vstafs,
   [  --disable-vstafs        disable VSTa FS support in Stage 2])
 
diff -Naur grub-0.96.orig/docs/grub.texi grub-0.96.reiser4/docs/grub.texi
--- grub-0.96.orig/docs/grub.texi	2004-09-20 23:47:38.000000000 +0200
+++ grub-0.96.reiser4/docs/grub.texi	2005-10-25 15:53:30.000000000 +0200
@@ -283,7 +283,7 @@
 Support multiple filesystem types transparently, plus a useful explicit
 blocklist notation. The currently supported filesystem types are
 @dfn{BSD FFS}, @dfn{DOS FAT16 and FAT32}, @dfn{Minix fs}, @dfn{Linux
-ext2fs}, @dfn{ReiserFS}, @dfn{JFS}, @dfn{XFS}, and @dfn{VSTa
+ext2fs}, @dfn{ReiserFS}, @dfn{ReiserFS}, @dfn{JFS}, @dfn{XFS}, and @dfn{VSTa
 fs}. @xref{Filesystem}, for more information.
 
 @item Support automatic decompression
@@ -1776,6 +1776,7 @@
 @itemx jfs_stage1_5
 @itemx minix_stage1_5
 @itemx reiserfs_stage1_5
+@itemx reiser4_stage1_5
 @itemx vstafs_stage1_5
 @itemx xfs_stage1_5
 
diff -Naur grub-0.96.orig/grub/Makefile.am grub-0.96.reiser4/grub/Makefile.am
--- grub-0.96.orig/grub/Makefile.am	2005-10-25 16:05:56.966988877 +0200
+++ grub-0.96.reiser4/grub/Makefile.am	2005-10-25 15:53:30.000000000 +0200
@@ -16,4 +16,4 @@
 AM_CFLAGS = $(GRUB_CFLAGS)
 
 grub_SOURCES = main.c asmstub.c
-grub_LDADD = ../stage2/libgrub.a  ../lib/libcommon.a $(GRUB_LIBS)
+grub_LDADD = ../stage2/libgrub.a  ../lib/libcommon.a $(GRUB_LIBS) $(REISER4_LIBS)
diff -Naur grub-0.96.orig/grub/Makefile.am.orig grub-0.96.reiser4/grub/Makefile.am.orig
--- grub-0.96.orig/grub/Makefile.am.orig	1970-01-01 01:00:00.000000000 +0100
+++ grub-0.96.reiser4/grub/Makefile.am.orig	2005-10-25 15:47:01.000000000 +0200
@@ -0,0 +1,19 @@
+sbin_PROGRAMS = grub
+
+if SERIAL_SPEED_SIMULATION
+SERIAL_FLAGS = -DSUPPORT_SERIAL=1 -DSIMULATE_SLOWNESS_OF_SERIAL=1
+else
+SERIAL_FLAGS = -DSUPPORT_SERIAL=1 
+endif
+
+AM_CPPFLAGS = -DGRUB_UTIL=1 -DFSYS_EXT2FS=1 -DFSYS_FAT=1 -DFSYS_FFS=1 \
+	-DFSYS_ISO9660=1 -DFSYS_JFS=1 -DFSYS_MINIX=1 -DFSYS_REISERFS=1 \
+	-DFSYS_UFS2=1 -DFSYS_VSTAFS=1 -DFSYS_XFS=1 \
+	-DUSE_MD5_PASSWORDS=1 -DSUPPORT_HERCULES=1 \
+	$(SERIAL_FLAGS) -I$(top_srcdir)/stage2 \
+	-I$(top_srcdir)/stage1 -I$(top_srcdir)/lib
+
+AM_CFLAGS = $(GRUB_CFLAGS)
+
+grub_SOURCES = main.c asmstub.c
+grub_LDADD = ../stage2/libgrub.a  ../lib/libcommon.a $(GRUB_LIBS)
diff -Naur grub-0.96.orig/stage2/Makefile.am grub-0.96.reiser4/stage2/Makefile.am
--- grub-0.96.orig/stage2/Makefile.am	2005-10-25 16:05:56.966988877 +0200
+++ grub-0.96.reiser4/stage2/Makefile.am	2005-10-25 16:00:45.000000000 +0200
@@ -13,17 +13,25 @@
 # For <stage1.h>.
 INCLUDES = -I$(top_srcdir)/stage1
 
+if ENABLE_REISER4_SUPPORT
+REISER4_STAGE1_5 = reiser4_stage1_5
+REISER4_STAGE1_5_EXEC = reiser4_stage1_5.exec
+else
+REISER4_STAGE1_5 =
+REISER4_STAGE1_5_EXEC =
+endif
+
 # The library for /sbin/grub.
 noinst_LIBRARIES = libgrub.a
 libgrub_a_SOURCES = boot.c builtins.c char_io.c cmdline.c common.c \
 	disk_io.c fsys_ext2fs.c fsys_fat.c fsys_ffs.c fsys_iso9660.c \
-	fsys_jfs.c fsys_minix.c fsys_reiserfs.c fsys_ufs2.c \
+	fsys_jfs.c fsys_minix.c fsys_reiserfs.c fsys_reiser4.c fsys_ufs2.c \
 	fsys_vstafs.c fsys_xfs.c gunzip.c md5.c serial.c stage2.c \
 	terminfo.c tparm.c graphics.c
 libgrub_a_CFLAGS = $(GRUB_CFLAGS) -I$(top_srcdir)/lib \
 	-DGRUB_UTIL=1 -DFSYS_EXT2FS=1 -DFSYS_FAT=1 -DFSYS_FFS=1 \
 	-DFSYS_ISO9660=1 -DFSYS_JFS=1 -DFSYS_MINIX=1 -DFSYS_REISERFS=1 \
-	-DFSYS_UFS2=1 -DFSYS_VSTAFS=1 -DFSYS_XFS=1 \
+	$(REISER4_CFLAGS) -DFSYS_UFS2=1 -DFSYS_VSTAFS=1 -DFSYS_XFS=1 \
 	-DUSE_MD5_PASSWORDS=1 -DSUPPORT_SERIAL=1 -DSUPPORT_HERCULES=1
 
 # Stage 2 and Stage 1.5's.
@@ -34,24 +42,26 @@
 if DISKLESS_SUPPORT
 pkglib_DATA = stage2 stage2_eltorito e2fs_stage1_5 fat_stage1_5 \
 	ffs_stage1_5 iso9660_stage1_5 jfs_stage1_5 minix_stage1_5 \
-	reiserfs_stage1_5 ufs2_stage1_5 vstafs_stage1_5 xfs_stage1_5 \
-	nbgrub pxegrub
+	reiserfs_stage1_5 $(REISER4_STAGE1_5) ufs2_stage1_5 \
+	vstafs_stage1_5 xfs_stage1_5 nbgrub pxegrub
 noinst_DATA = pre_stage2 start start_eltorito nbloader pxeloader diskless
 noinst_PROGRAMS = pre_stage2.exec start.exec start_eltorito.exec \
 	e2fs_stage1_5.exec fat_stage1_5.exec ffs_stage1_5.exec \
 	iso9660_stage1_5.exec jfs_stage1_5.exec minix_stage1_5.exec \
-	reiserfs_stage1_5.exec ufs2_stage1_5.exec vstafs_stage1_5.exec \
-	xfs_stage1_5.exec nbloader.exec pxeloader.exec diskless.exec
+	reiserfs_stage1_5.exec $(REISER4_STAGE1_5_EXEC) ufs2_stage1_5.exec \
+	vstafs_stage1_5.exec xfs_stage1_5.exec nbloader.exec pxeloader.exec \
+	diskless.exec
 else
 pkglib_DATA = stage2 stage2_eltorito e2fs_stage1_5 fat_stage1_5 \
 	ffs_stage1_5 iso9660_stage1_5 jfs_stage1_5 minix_stage1_5 \
-	reiserfs_stage1_5 ufs2_stage1_5 vstafs_stage1_5 xfs_stage1_5
+	reiserfs_stage1_5 $(REISER4_STAGE1_5) ufs2_stage1_5 \
+	vstafs_stage1_5 xfs_stage1_5
 noinst_DATA = pre_stage2 start start_eltorito
 noinst_PROGRAMS = pre_stage2.exec start.exec start_eltorito.exec \
 	e2fs_stage1_5.exec fat_stage1_5.exec ffs_stage1_5.exec \
 	iso9660_stage1_5.exec jfs_stage1_5.exec minix_stage1_5.exec \
-	reiserfs_stage1_5.exec ufs2_stage1_5.exec vstafs_stage1_5.exec \
-	xfs_stage1_5.exec
+	reiserfs_stage1_5.exec $(REISER4_STAGE1_5_EXEC) ufs2_stage1_5.exec \
+	vstafs_stage1_5.exec xfs_stage1_5.exec
 endif
 MOSTLYCLEANFILES = $(noinst_PROGRAMS)
 
@@ -85,7 +95,7 @@
 GRAPHICS_FLAGS =
 endif
 
-STAGE2_COMPILE = $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+STAGE2_COMPILE = $(STAGE2_CFLAGS) -fno-builtin \
 	$(NETBOOT_FLAGS) $(SERIAL_FLAGS) $(HERCULES_FLAGS) $(GRAPHICS_FLAGS)
 
 STAGE1_5_LINK = -nostdlib -Wl,-N -Wl,-Ttext -Wl,2000
@@ -95,15 +105,17 @@
 pre_stage2_exec_SOURCES = asm.S bios.c boot.c builtins.c char_io.c \
 	cmdline.c common.c console.c disk_io.c fsys_ext2fs.c \
 	fsys_fat.c fsys_ffs.c fsys_iso9660.c fsys_jfs.c fsys_minix.c \
-	fsys_reiserfs.c fsys_ufs2.c fsys_vstafs.c fsys_xfs.c gunzip.c \
-	hercules.c md5.c serial.c smp-imps.c stage2.c terminfo.c tparm.c \
-	graphics.c
+	fsys_reiserfs.c fsys_reiser4.c fsys_ufs2.c fsys_vstafs.c \
+	fsys_xfs.c gunzip.c hercules.c md5.c serial.c smp-imps.c \
+	stage2.c terminfo.c tparm.c graphics.c
 pre_stage2_exec_CFLAGS = $(STAGE2_COMPILE) $(FSYS_CFLAGS)
 pre_stage2_exec_CCASFLAGS = $(STAGE2_COMPILE) $(FSYS_CFLAGS)
 pre_stage2_exec_LDFLAGS = $(PRE_STAGE2_LINK)
 
 if NETBOOT_SUPPORT
-pre_stage2_exec_LDADD = ../netboot/libdrivers.a
+pre_stage2_exec_LDADD = ../netboot/libdrivers.a $(REISER4_LIBS)
+else
+pre_stage2_exec_LDADD = $(REISER4_LIBS)
 endif
 
 if DISKLESS_SUPPORT
@@ -197,6 +209,16 @@
 	-DNO_BLOCK_FILES=1
 reiserfs_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK)
 
+# For reiser4_stage1_5 target.
+reiser4_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c \
+	disk_io.c stage1_5.c fsys_reiser4.c bios.c
+reiser4_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) $(REISER4_CFLAGS) \
+	-DNO_BLOCK_FILES=1
+reiser4_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) $(REISER4_CFLAGS) \
+	-DNO_BLOCK_FILES=1
+reiser4_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK)
+reiser4_stage1_5_exec_LDADD = $(REISER4_LIBS)
+
 # For vstafs_stage1_5 target.
 vstafs_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c \
 	disk_io.c stage1_5.c fsys_vstafs.c bios.c
diff -Naur grub-0.96.orig/stage2/Makefile.am.orig grub-0.96.reiser4/stage2/Makefile.am.orig
--- grub-0.96.orig/stage2/Makefile.am.orig	1970-01-01 01:00:00.000000000 +0100
+++ grub-0.96.reiser4/stage2/Makefile.am.orig	2005-10-25 15:47:01.000000000 +0200
@@ -0,0 +1,279 @@
+# For test target.
+TESTS = size_test
+noinst_SCRIPTS = $(TESTS)
+
+# For dist target.
+noinst_HEADERS = apic.h defs.h dir.h disk_inode.h disk_inode_ffs.h \
+        fat.h filesys.h freebsd.h fs.h hercules.h i386-elf.h \
+	imgact_aout.h iso9660.h jfs.h mb_header.h mb_info.h md5.h \
+	nbi.h pc_slice.h serial.h shared.h smp-imps.h term.h \
+	terminfo.h tparm.h nbi.h ufs2.h vstafs.h xfs.h graphics.h
+EXTRA_DIST = setjmp.S apm.S $(noinst_SCRIPTS)
+
+# For <stage1.h>.
+INCLUDES = -I$(top_srcdir)/stage1
+
+# The library for /sbin/grub.
+noinst_LIBRARIES = libgrub.a
+libgrub_a_SOURCES = boot.c builtins.c char_io.c cmdline.c common.c \
+	disk_io.c fsys_ext2fs.c fsys_fat.c fsys_ffs.c fsys_iso9660.c \
+	fsys_jfs.c fsys_minix.c fsys_reiserfs.c fsys_ufs2.c \
+	fsys_vstafs.c fsys_xfs.c gunzip.c md5.c serial.c stage2.c \
+	terminfo.c tparm.c graphics.c
+libgrub_a_CFLAGS = $(GRUB_CFLAGS) -I$(top_srcdir)/lib \
+	-DGRUB_UTIL=1 -DFSYS_EXT2FS=1 -DFSYS_FAT=1 -DFSYS_FFS=1 \
+	-DFSYS_ISO9660=1 -DFSYS_JFS=1 -DFSYS_MINIX=1 -DFSYS_REISERFS=1 \
+	-DFSYS_UFS2=1 -DFSYS_VSTAFS=1 -DFSYS_XFS=1 \
+	-DUSE_MD5_PASSWORDS=1 -DSUPPORT_SERIAL=1 -DSUPPORT_HERCULES=1
+
+# Stage 2 and Stage 1.5's.
+pkglibdir = $(libdir)/$(PACKAGE)/$(host_cpu)-$(host_vendor)
+
+EXTRA_PROGRAMS = nbloader.exec pxeloader.exec diskless.exec
+
+if DISKLESS_SUPPORT
+pkglib_DATA = stage2 stage2_eltorito e2fs_stage1_5 fat_stage1_5 \
+	ffs_stage1_5 iso9660_stage1_5 jfs_stage1_5 minix_stage1_5 \
+	reiserfs_stage1_5 ufs2_stage1_5 vstafs_stage1_5 xfs_stage1_5 \
+	nbgrub pxegrub
+noinst_DATA = pre_stage2 start start_eltorito nbloader pxeloader diskless
+noinst_PROGRAMS = pre_stage2.exec start.exec start_eltorito.exec \
+	e2fs_stage1_5.exec fat_stage1_5.exec ffs_stage1_5.exec \
+	iso9660_stage1_5.exec jfs_stage1_5.exec minix_stage1_5.exec \
+	reiserfs_stage1_5.exec ufs2_stage1_5.exec vstafs_stage1_5.exec \
+	xfs_stage1_5.exec nbloader.exec pxeloader.exec diskless.exec
+else
+pkglib_DATA = stage2 stage2_eltorito e2fs_stage1_5 fat_stage1_5 \
+	ffs_stage1_5 iso9660_stage1_5 jfs_stage1_5 minix_stage1_5 \
+	reiserfs_stage1_5 ufs2_stage1_5 vstafs_stage1_5 xfs_stage1_5
+noinst_DATA = pre_stage2 start start_eltorito
+noinst_PROGRAMS = pre_stage2.exec start.exec start_eltorito.exec \
+	e2fs_stage1_5.exec fat_stage1_5.exec ffs_stage1_5.exec \
+	iso9660_stage1_5.exec jfs_stage1_5.exec minix_stage1_5.exec \
+	reiserfs_stage1_5.exec ufs2_stage1_5.exec vstafs_stage1_5.exec \
+	xfs_stage1_5.exec
+endif
+MOSTLYCLEANFILES = $(noinst_PROGRAMS)
+
+PRE_STAGE2_LINK = -nostdlib -Wl,-N -Wl,-Ttext -Wl,8200
+START_LINK = -nostdlib -Wl,-N -Wl,-Ttext -Wl,8000
+NBLOADER_LINK = -nostdlib -Wl,-N -Wl,-Ttext -Wl,0
+PXELOADER_LINK = -nostdlib -Wl,-N -Wl,-Ttext -Wl,7C00
+START_ELTORITO_LINK = -nostdlib -Wl,-N -Wl,-Ttext -Wl,7C00
+
+if NETBOOT_SUPPORT
+NETBOOT_FLAGS = -I$(top_srcdir)/netboot -DSUPPORT_NETBOOT=1
+else
+NETBOOT_FLAGS =
+endif
+
+if SERIAL_SUPPORT
+SERIAL_FLAGS = -DSUPPORT_SERIAL=1
+else
+SERIAL_FLAGS =
+endif
+
+if HERCULES_SUPPORT
+HERCULES_FLAGS = -DSUPPORT_HERCULES=1
+else
+HERCULES_FLAGS =
+endif
+
+if GRAPHICS_SUPPORT
+GRAPHICS_FLAGS = -DSUPPORT_GRAPHICS=1
+else
+GRAPHICS_FLAGS =
+endif
+
+STAGE2_COMPILE = $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+	$(NETBOOT_FLAGS) $(SERIAL_FLAGS) $(HERCULES_FLAGS) $(GRAPHICS_FLAGS)
+
+STAGE1_5_LINK = -nostdlib -Wl,-N -Wl,-Ttext -Wl,2000
+STAGE1_5_COMPILE = $(STAGE2_COMPILE) -DNO_DECOMPRESSION=1 -DSTAGE1_5=1
+
+# For stage2 target.
+pre_stage2_exec_SOURCES = asm.S bios.c boot.c builtins.c char_io.c \
+	cmdline.c common.c console.c disk_io.c fsys_ext2fs.c \
+	fsys_fat.c fsys_ffs.c fsys_iso9660.c fsys_jfs.c fsys_minix.c \
+	fsys_reiserfs.c fsys_ufs2.c fsys_vstafs.c fsys_xfs.c gunzip.c \
+	hercules.c md5.c serial.c smp-imps.c stage2.c terminfo.c tparm.c \
+	graphics.c
+pre_stage2_exec_CFLAGS = $(STAGE2_COMPILE) $(FSYS_CFLAGS)
+pre_stage2_exec_CCASFLAGS = $(STAGE2_COMPILE) $(FSYS_CFLAGS)
+pre_stage2_exec_LDFLAGS = $(PRE_STAGE2_LINK)
+
+if NETBOOT_SUPPORT
+pre_stage2_exec_LDADD = ../netboot/libdrivers.a
+endif
+
+if DISKLESS_SUPPORT
+BUILT_SOURCES = stage2_size.h diskless_size.h
+else
+BUILT_SOURCES = stage2_size.h
+endif
+
+CLEANFILES = $(pkglib_DATA) $(noinst_DATA) $(BUILT_SOURCES)
+
+stage2_size.h: pre_stage2
+	-rm -f stage2_size.h
+	set dummy `ls -l pre_stage2`; \
+	echo "#define STAGE2_SIZE $$6" > stage2_size.h
+
+start_exec_SOURCES = start.S
+start_exec_CCASFLAGS = $(STAGE2_COMPILE)
+start_exec_LDFLAGS = $(START_LINK)
+
+# XXX: automake doesn't provide a way to specify dependencies for object
+# files explicitly, so we must write this by a general Makefile scheme.
+# If automake change the naming scheme for per-executable objects, this
+# will be broken.
+start_exec-start.$(OBJEXT): stage2_size.h
+
+stage2: pre_stage2 start
+	-rm -f stage2
+	cat start pre_stage2 > stage2
+
+start_eltorito_exec_SOURCES = start_eltorito.S
+start_eltorito_exec_CCASFLAGS = $(STAGE2_COMPILE)
+start_eltorito_exec_LDFLAGS = $(START_ELTORITO_LINK)
+
+start_eltorito_exec-start.$(OBJEXT): stage2_size.h
+
+stage2_eltorito: pre_stage2 start_eltorito
+	-rm -f stage2_eltorito
+	cat start_eltorito pre_stage2 > stage2_eltorito
+
+# For e2fs_stage1_5 target.
+e2fs_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c disk_io.c \
+	stage1_5.c fsys_ext2fs.c bios.c
+e2fs_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_EXT2FS=1 \
+	-DNO_BLOCK_FILES=1
+e2fs_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_EXT2FS=1 \
+	-DNO_BLOCK_FILES=1
+e2fs_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK)
+
+# For fat_stage1_5 target.
+fat_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c disk_io.c \
+	stage1_5.c fsys_fat.c bios.c
+fat_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_FAT=1 \
+	-DNO_BLOCK_FILES=1
+fat_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_FAT=1 \
+	-DNO_BLOCK_FILES=1
+fat_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK)
+
+# For ffs_stage1_5 target.
+ffs_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c disk_io.c \
+	stage1_5.c fsys_ffs.c bios.c
+ffs_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_FFS=1 \
+	-DNO_BLOCK_FILES=1
+ffs_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_FFS=1 \
+	-DNO_BLOCK_FILES=1
+ffs_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK)
+
+# For ufs2_stage1_5 target.
+ufs2_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c disk_io.c \
+	stage1_5.c fsys_ufs2.c bios.c
+ufs2_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_UFS2=1 \
+	-DNO_BLOCK_FILES=1
+ufs2_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_UFS2=1 \
+	-DNO_BLOCK_FILES=1
+ufs2_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK)
+
+# For minix_stage1_5 target.
+minix_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c disk_io.c \
+	stage1_5.c fsys_minix.c bios.c
+minix_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_MINIX=1 \
+	-DNO_BLOCK_FILES=1
+minix_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_MINIX=1 \
+	-DNO_BLOCK_FILES=1
+minix_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK)
+
+# For reiserfs_stage1_5 target.
+reiserfs_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c \
+	disk_io.c stage1_5.c fsys_reiserfs.c bios.c
+reiserfs_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_REISERFS=1 \
+	-DNO_BLOCK_FILES=1
+reiserfs_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_REISERFS=1 \
+	-DNO_BLOCK_FILES=1
+reiserfs_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK)
+
+# For vstafs_stage1_5 target.
+vstafs_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c \
+	disk_io.c stage1_5.c fsys_vstafs.c bios.c
+vstafs_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_VSTAFS=1 \
+	-DNO_BLOCK_FILES=1
+vstafs_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_VSTAFS=1 \
+	-DNO_BLOCK_FILES=1
+vstafs_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK)
+
+# For jfs_stage1_5 target.
+jfs_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c \
+	disk_io.c stage1_5.c fsys_jfs.c bios.c
+jfs_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_JFS=1 \
+	-DNO_BLOCK_FILES=1
+jfs_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_JFS=1 \
+	-DNO_BLOCK_FILES=1
+jfs_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK)
+
+# For xfs_stage1_5 target.
+xfs_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c \
+	disk_io.c stage1_5.c fsys_xfs.c bios.c
+xfs_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_XFS=1 \
+	-DNO_BLOCK_FILES=1
+xfs_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_XFS=1 \
+	-DNO_BLOCK_FILES=1
+xfs_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK)
+
+# For iso9660_stage1_5 target.
+iso9660_stage1_5_exec_SOURCES = start_eltorito.S asm.S common.c char_io.c \
+	disk_io.c stage1_5.c fsys_iso9660.c bios.c
+iso9660_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_ISO9660=1 \
+	-DNO_BLOCK_FILES=1
+iso9660_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_ISO9660=1 \
+	-DNO_BLOCK_FILES=1
+iso9660_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK)
+
+# For diskless target.
+diskless_exec_SOURCES = $(pre_stage2_exec_SOURCES)
+diskless_exec_CFLAGS = $(STAGE2_COMPILE) $(FSYS_CFLAGS) \
+	-DSUPPORT_DISKLESS=1
+diskless_exec_CCASFLAGS = $(STAGE2_COMPILE) $(FSYS_CFLAGS) \
+	-DSUPPORT_DISKLESS=1
+diskless_exec_LDFLAGS = $(PRE_STAGE2_LINK)
+diskless_exec_LDADD = ../netboot/libdrivers.a
+
+diskless_size.h: diskless
+	-rm -f $@
+	set dummy `ls -l $^`; \
+	echo "#define DISKLESS_SIZE $$6" > $@
+
+# For nbloader target.
+nbloader_exec_SOURCES = nbloader.S
+nbloader_exec_CCASFLAGS = $(STAGE2_COMPILE)
+nbloader_exec_LDFLAGS = $(NBLOADER_LINK)
+
+# XXX: See the comment for start_exec-start.o.
+nbloader_exec-nbloader.$(OBJEXT): diskless_size.h
+
+# For nbgrub target.
+nbgrub: nbloader diskless
+	-rm -f $@
+	cat $^ > $@
+
+# For pxeloader target.
+pxeloader_exec_SOURCES = pxeloader.S
+pxeloader_exec_CCASFLAGS = $(STAGE2_COMPILE)
+pxeloader_exec_LDFLAGS = $(PXELOADER_LINK)
+
+# XXX: See the comment for start_exec-start.o.
+pxeloader_exec-pxeloader.$(OBJEXT): diskless_size.h
+
+# For pxegrub target.
+pxegrub: pxeloader diskless
+	-rm -f $@
+	cat $^ > $@
+
+# General rule for making a raw binary.
+SUFFIXES = .exec
+.exec:
+	$(OBJCOPY) -O binary $< $@
diff -Naur grub-0.96.orig/stage2/builtins.c grub-0.96.reiser4/stage2/builtins.c
--- grub-0.96.orig/stage2/builtins.c	2005-10-25 16:05:57.602891173 +0200
+++ grub-0.96.reiser4/stage2/builtins.c	2005-10-25 15:53:30.000000000 +0200
@@ -4067,6 +4067,7 @@
     {"jfs",      "/jfs_stage1_5"},
     {"minix",    "/minix_stage1_5"},
     {"reiserfs", "/reiserfs_stage1_5"},
+    {"reiser4",  "/reiser4_stage1_5"},
     {"vstafs",   "/vstafs_stage1_5"},
     {"xfs",      "/xfs_stage1_5"}
   };
diff -Naur grub-0.96.orig/stage2/builtins.c.orig grub-0.96.reiser4/stage2/builtins.c.orig
--- grub-0.96.orig/stage2/builtins.c.orig	2005-10-25 16:05:56.419073062 +0200
+++ grub-0.96.reiser4/stage2/builtins.c.orig	2005-10-25 15:47:02.000000000 +0200
@@ -59,7 +59,8 @@
 /* The default entry.  */
 int default_entry = 0;
 /* The fallback entry.  */
-int fallback_entry = -1;
+int fallback_entryno;
+int fallback_entries[MAX_FALLBACK_ENTRIES];
 /* The number of current entry.  */
 int current_entryno;
 /* The address for Multiboot command-line buffer.  */
@@ -97,7 +98,8 @@
 {
   default_entry = 0;
   password = 0;
-  fallback_entry = -1;
+  fallback_entryno = -1;
+  fallback_entries[0] = -1;
   grub_timeout = -1;
 }
 
@@ -129,61 +131,98 @@
 }
 
 
+/* blocklist_read_helper nee disk_read_blocklist_func was a nested
+ * function, to which pointers were taken and exposed globally.  Even
+ * in the GNU-C nested functions extension, they have local linkage,
+ * and aren't guaranteed to be accessable *at all* outside of their 
+ * containing scope.
+ *
+ * Above and beyond all of that, the variables within blocklist_func_context
+ * are originally local variables, with local (not even static) linkage,
+ * from within blocklist_func.  These were each referenced by
+ * disk_read_blocklist_func, which is only called from other functions
+ * through a globally scoped pointer.
+ * 
+ * The documentation in GCC actually uses the words "all hell will break
+ * loose" to describe this scenario.
+ *
+ * Also, "start_sector" was also used uninitialized, but gcc doesn't warn
+ * about it (possibly because of the scoping madness?)
+ */
+   
+static struct {
+       int start_sector;
+       int num_sectors;
+       int num_entries;
+       int last_length;
+} blocklist_func_context = {
+       .start_sector = 0,
+       .num_sectors = 0,
+       .num_entries = 0,
+       .last_length = 0
+};
+
+/* Collect contiguous blocks into one entry as many as possible,
+   and print the blocklist notation on the screen.  */
+static void
+blocklist_read_helper (int sector, int offset, int length)
+{
+  int *start_sector = &blocklist_func_context.start_sector;
+  int *num_sectors = &blocklist_func_context.num_sectors;
+  int *num_entries = &blocklist_func_context.num_entries;
+  int *last_length = &blocklist_func_context.last_length;
+
+  if (*num_sectors > 0)
+  {
+    if (*start_sector + *num_sectors == sector
+      && offset == 0 && *last_length == SECTOR_SIZE)
+    {
+      *num_sectors++;
+      *last_length = length;
+      return;
+    }
+    else
+    {
+      if (*last_length == SECTOR_SIZE)
+        grub_printf ("%s%d+%d", *num_entries ? "," : "",
+          *start_sector - part_start, *num_sectors);
+      else if (*num_sectors > 1)
+        grub_printf ("%s%d+%d,%d[0-%d]", *num_entries ? "," : "",
+          *start_sector - part_start, *num_sectors-1,
+          *start_sector + *num_sectors-1 - part_start, 
+          *last_length);
+      else
+        grub_printf ("%s%d[0-%d]", *num_entries ? "," : "",
+          *start_sector - part_start, *last_length);
+      *num_entries++;
+      *num_sectors = 0;
+    }
+  }
+
+  if (offset > 0)
+  {
+    grub_printf("%s%d[%d-%d]", *num_entries ? "," : "",
+          sector-part_start, offset, offset+length);
+    *num_entries++;
+  }
+  else
+  {
+    *start_sector = sector;
+    *num_sectors = 1;
+    *last_length = length;
+  }
+}
+
 /* blocklist */
 static int
 blocklist_func (char *arg, int flags)
 {
   char *dummy = (char *) RAW_ADDR (0x100000);
-  int start_sector;
-  int num_sectors = 0;
-  int num_entries = 0;
-  int last_length = 0;
-
-  /* Collect contiguous blocks into one entry as many as possible,
-     and print the blocklist notation on the screen.  */
-  static void disk_read_blocklist_func (int sector, int offset, int length)
-    {
-      if (num_sectors > 0)
-	{
-	  if (start_sector + num_sectors == sector
-	      && offset == 0 && last_length == SECTOR_SIZE)
-	    {
-	      num_sectors++;
-	      last_length = length;
-	      return;
-	    }
-	  else
-	    {
-	      if (last_length == SECTOR_SIZE)
-		grub_printf ("%s%d+%d", num_entries ? "," : "",
-			     start_sector - part_start, num_sectors);
-	      else if (num_sectors > 1)
-		grub_printf ("%s%d+%d,%d[0-%d]", num_entries ? "," : "",
-			     start_sector - part_start, num_sectors-1,
-			     start_sector + num_sectors-1 - part_start, 
-			     last_length);
-	      else
-		grub_printf ("%s%d[0-%d]", num_entries ? "," : "",
-			     start_sector - part_start, last_length);
-	      num_entries++;
-	      num_sectors = 0;
-	    }
-	}
-
-      if (offset > 0)
-	{
-	  grub_printf("%s%d[%d-%d]", num_entries ? "," : "",
-		      sector-part_start, offset, offset+length);
-	  num_entries++;
-	}
-      else
-	{
-	  start_sector = sector;
-	  num_sectors = 1;
-	  last_length = length;
-	}
-    }
 
+  int *start_sector = &blocklist_func_context.start_sector;
+  int *num_sectors = &blocklist_func_context.num_sectors;
+  int *num_entries = &blocklist_func_context.num_entries;
+  
   /* Open the file.  */
   if (! grub_open (arg))
     return 1;
@@ -202,15 +241,15 @@
   grub_printf (")");
 
   /* Read in the whole file to DUMMY.  */
-  disk_read_hook = disk_read_blocklist_func;
+  disk_read_hook = blocklist_read_helper;
   if (! grub_read (dummy, -1))
     goto fail;
 
   /* The last entry may not be printed yet.  Don't check if it is a
    * full sector, since it doesn't matter if we read too much. */
-  if (num_sectors > 0)
-    grub_printf ("%s%d+%d", num_entries ? "," : "",
-		 start_sector - part_start, num_sectors);
+  if (*num_sectors > 0)
+	grub_printf ("%s%d+%d", *num_entries ? "," : "",
+                *start_sector - part_start, *num_sectors);
 
   grub_printf ("\n");
   
@@ -587,8 +626,10 @@
     "white"
   };
 
+  auto int color_number (char *str);
+  
   /* Convert the color name STR into the magical number.  */
-  static int color_number (char *str)
+  auto int color_number (char *str)
     {
       char *ptr;
       int i;
@@ -846,6 +887,138 @@
 };
 #endif /* SUPPORT_NETBOOT */
 
+static int terminal_func (char *arg, int flags);
+
+#ifdef SUPPORT_GRAPHICS
+
+static int splashimage_func(char *arg, int flags) {
+    char splashimage[64];
+    int i;
+    
+    /* filename can only be 64 characters due to our buffer size */
+    if (strlen(arg) > 63)
+	return 1;
+    if (flags == BUILTIN_CMDLINE) {
+	if (!grub_open(arg))
+	    return 1;
+	grub_close();
+    }
+
+    strcpy(splashimage, arg);
+
+    /* get rid of TERM_NEED_INIT from the graphics terminal. */
+    for (i = 0; term_table[i].name; i++) {
+	if (grub_strcmp (term_table[i].name, "graphics") == 0) {
+	    term_table[i].flags &= ~TERM_NEED_INIT;
+	    break;
+	}
+    }
+    
+    graphics_set_splash(splashimage);
+
+    if (flags == BUILTIN_CMDLINE && graphics_inited) {
+	graphics_end();
+	graphics_init();
+	graphics_cls();
+    }
+
+    /* FIXME: should we be explicitly switching the terminal as a 
+     * side effect here? */
+    terminal_func("graphics", flags);
+
+    return 0;
+}
+
+static struct builtin builtin_splashimage =
+{
+  "splashimage",
+  splashimage_func,
+  BUILTIN_CMDLINE | BUILTIN_MENU | BUILTIN_HELP_LIST,
+  "splashimage FILE",
+  "Load FILE as the background image when in graphics mode."
+};
+
+
+/* foreground */
+static int
+foreground_func(char *arg, int flags)
+{
+    if (grub_strlen(arg) == 6) {
+	int r = ((hex(arg[0]) << 4) | hex(arg[1])) >> 2;
+	int g = ((hex(arg[2]) << 4) | hex(arg[3])) >> 2;
+	int b = ((hex(arg[4]) << 4) | hex(arg[5])) >> 2;
+
+	foreground = (r << 16) | (g << 8) | b;
+	if (graphics_inited)
+	    graphics_set_palette(15, r, g, b);
+
+	return (0);
+    }
+
+    return (1);
+}
+
+static struct builtin builtin_foreground =
+{
+  "foreground",
+  foreground_func,
+  BUILTIN_CMDLINE | BUILTIN_MENU | BUILTIN_HELP_LIST,
+  "foreground RRGGBB",
+  "Sets the foreground color when in graphics mode."
+  "RR is red, GG is green, and BB blue. Numbers must be in hexadecimal."
+};
+
+
+/* background */
+static int
+background_func(char *arg, int flags)
+{
+    if (grub_strlen(arg) == 6) {
+	int r = ((hex(arg[0]) << 4) | hex(arg[1])) >> 2;
+	int g = ((hex(arg[2]) << 4) | hex(arg[3])) >> 2;
+	int b = ((hex(arg[4]) << 4) | hex(arg[5])) >> 2;
+
+	background = (r << 16) | (g << 8) | b;
+	if (graphics_inited)
+	    graphics_set_palette(0, r, g, b);
+	return (0);
+    }
+
+    return (1);
+}
+
+static struct builtin builtin_background =
+{
+  "background",
+  background_func,
+  BUILTIN_CMDLINE | BUILTIN_MENU | BUILTIN_HELP_LIST,
+  "background RRGGBB",
+  "Sets the background color when in graphics mode."
+  "RR is red, GG is green, and BB blue. Numbers must be in hexadecimal."
+};
+
+#endif /* SUPPORT_GRAPHICS */
+
+
+/* clear */
+static int 
+clear_func() 
+{
+  if (current_term->cls)
+    current_term->cls();
+
+  return 0;
+}
+
+static struct builtin builtin_clear =
+{
+  "clear",
+  clear_func,
+  BUILTIN_CMDLINE | BUILTIN_HELP_LIST,
+  "clear",
+  "Clear the screen"
+};
+
 
 /* displayapm */
 static int
@@ -1143,9 +1316,35 @@
 static int
 fallback_func (char *arg, int flags)
 {
-  if (! safe_parse_maxint (&arg, &fallback_entry))
-    return 1;
+  int i = 0;
+
+  while (*arg)
+    {
+      int entry;
+      int j;
+      
+      if (! safe_parse_maxint (&arg, &entry))
+	return 1;
+
+      /* Remove duplications to prevent infinite looping.  */
+      for (j = 0; j < i; j++)
+	if (entry == fallback_entries[j])
+	  break;
+      if (j != i)
+	continue;
+      
+      fallback_entries[i++] = entry;
+      if (i == MAX_FALLBACK_ENTRIES)
+	break;
+      
+      arg = skip_to (0, arg);
+    }
 
+  if (i < MAX_FALLBACK_ENTRIES)
+    fallback_entries[i] = -1;
+
+  fallback_entryno = (i == 0) ? -1 : 0;
+  
   return 0;
 }
 
@@ -1155,7 +1354,7 @@
   fallback_func,
   BUILTIN_MENU,
 #if 0
-  "fallback NUM",
+  "fallback NUM...",
   "Go into unattended boot mode: if the default boot entry has any"
   " errors, instead of waiting for the user to do anything, it"
   " immediately starts over using the NUM entry (same numbering as the"
@@ -1708,6 +1907,77 @@
 
 
 /* install */
+static struct {
+       int saved_sector;
+       int installaddr;
+       int installlist;
+       char *stage2_first_buffer;
+} install_func_context = {
+       .saved_sector = 0,
+       .installaddr = 0,
+       .installlist = 0,
+       .stage2_first_buffer = NULL,
+};
+
+/* Save the first sector of Stage2 in STAGE2_SECT.  */
+/* Formerly disk_read_savesect_func with local scope inside install_func */
+static void
+install_savesect_helper(int sector, int offset, int length)
+{
+  if (debug)
+    printf ("[%d]", sector);
+
+  /* ReiserFS has files which sometimes contain data not aligned
+     on sector boundaries.  Returning an error is better than
+     silently failing. */
+  if (offset != 0 || length != SECTOR_SIZE)
+    errnum = ERR_UNALIGNED;
+
+  install_func_context.saved_sector = sector;
+}
+
+/* Write SECTOR to INSTALLLIST, and update INSTALLADDR and  INSTALLSECT.  */
+/* Formerly disk_read_blocklist_func with local scope inside install_func */
+static void
+install_blocklist_helper (int sector, int offset, int length)
+{
+  int *installaddr = &install_func_context.installaddr;
+  int *installlist = &install_func_context.installlist;
+  char **stage2_first_buffer = &install_func_context.stage2_first_buffer;
+  /* Was the last sector full? */
+  static int last_length = SECTOR_SIZE;
+
+  if (debug)
+    printf("[%d]", sector);
+
+  if (offset != 0 || last_length != SECTOR_SIZE)
+    {
+      /* We found a non-sector-aligned data block. */
+      errnum = ERR_UNALIGNED;
+      return;
+    }
+
+  last_length = length;
+
+  if (*((unsigned long *) (*installlist - 4))
+      + *((unsigned short *) *installlist) != sector
+      || *installlist == (int) *stage2_first_buffer + SECTOR_SIZE + 4)
+    {
+      *installlist -= 8;
+
+      if (*((unsigned long *) (*installlist - 8)))
+        errnum = ERR_WONT_FIT;
+      else
+        {
+          *((unsigned short *) (*installlist + 2)) = (*installaddr >> 4);
+          *((unsigned long *) (*installlist - 4)) = sector;
+        }
+    }
+
+  *((unsigned short *) *installlist) += 1;
+  *installaddr += 512;
+}
+
 static int
 install_func (char *arg, int flags)
 {
@@ -1715,20 +1985,25 @@
   char *stage1_buffer = (char *) RAW_ADDR (0x100000);
   char *stage2_buffer = stage1_buffer + SECTOR_SIZE;
   char *old_sect = stage2_buffer + SECTOR_SIZE;
-  char *stage2_first_buffer = old_sect + SECTOR_SIZE;
-  char *stage2_second_buffer = stage2_first_buffer + SECTOR_SIZE;
+  /* stage2_first_buffer used to be defined as:
+   * char *stage2_first_buffer = old_sect + SECTOR_SIZE;  */
+  char **stage2_first_buffer = &install_func_context.stage2_first_buffer;
+  /* and stage2_second_buffer was:
+   * char *stage2_second_buffer = stage2_first_buffer + SECTOR_SIZE; */
+  char *stage2_second_buffer = old_sect + SECTOR_SIZE + SECTOR_SIZE;
   /* XXX: Probably SECTOR_SIZE is reasonable.  */
   char *config_filename = stage2_second_buffer + SECTOR_SIZE;
   char *dummy = config_filename + SECTOR_SIZE;
-  int new_drive = 0xFF;
+  int new_drive = GRUB_INVALID_DRIVE;
   int dest_drive, dest_partition, dest_sector;
   int src_drive, src_partition, src_part_start;
   int i;
   struct geometry dest_geom, src_geom;
-  int saved_sector;
+  int *saved_sector = &install_func_context.saved_sector;
   int stage2_first_sector, stage2_second_sector;
   char *ptr;
-  int installaddr, installlist;
+  int *installaddr = &install_func_context.installaddr;
+  int *installlist = &install_func_context.installlist;
   /* Point to the location of the name of a configuration file in Stage 2.  */
   char *config_file_location;
   /* If FILE is a Stage 1.5?  */
@@ -1737,64 +2012,13 @@
   int is_open = 0;
   /* If LBA is forced?  */
   int is_force_lba = 0;
-  /* Was the last sector full? */
-  int last_length = SECTOR_SIZE;
-  
 #ifdef GRUB_UTIL
   /* If the Stage 2 is in a partition mounted by an OS, this will store
      the filename under the OS.  */
   char *stage2_os_file = 0;
 #endif /* GRUB_UTIL */
-  
-  /* Save the first sector of Stage2 in STAGE2_SECT.  */
-  static void disk_read_savesect_func (int sector, int offset, int length)
-    {
-      if (debug)
-	printf ("[%d]", sector);
-
-      /* ReiserFS has files which sometimes contain data not aligned
-         on sector boundaries.  Returning an error is better than
-         silently failing. */
-      if (offset != 0 || length != SECTOR_SIZE)
-	errnum = ERR_UNALIGNED;
 
-      saved_sector = sector;
-    }
-
-  /* Write SECTOR to INSTALLLIST, and update INSTALLADDR and
-     INSTALLSECT.  */
-  static void disk_read_blocklist_func (int sector, int offset, int length)
-    {
-      if (debug)
-	printf("[%d]", sector);
-
-      if (offset != 0 || last_length != SECTOR_SIZE)
-	{
-	  /* We found a non-sector-aligned data block. */
-	  errnum = ERR_UNALIGNED;
-	  return;
-	}
-
-      last_length = length;
-
-      if (*((unsigned long *) (installlist - 4))
-	  + *((unsigned short *) installlist) != sector
-	  || installlist == (int) stage2_first_buffer + SECTOR_SIZE + 4)
-	{
-	  installlist -= 8;
-
-	  if (*((unsigned long *) (installlist - 8)))
-	    errnum = ERR_WONT_FIT;
-	  else
-	    {
-	      *((unsigned short *) (installlist + 2)) = (installaddr >> 4);
-	      *((unsigned long *) (installlist - 4)) = sector;
-	    }
-	}
-
-      *((unsigned short *) installlist) += 1;
-      installaddr += 512;
-    }
+  *stage2_first_buffer = old_sect + SECTOR_SIZE;
 
   /* First, check the GNU-style long option.  */
   while (1)
@@ -1827,10 +2051,10 @@
   addr = skip_to (0, file);
 
   /* Get the installation address.  */
-  if (! safe_parse_maxint (&addr, &installaddr))
+  if (! safe_parse_maxint (&addr, installaddr))
     {
       /* ADDR is not specified.  */
-      installaddr = 0;
+      *installaddr = 0;
       ptr = addr;
       errnum = 0;
     }
@@ -1924,17 +2148,17 @@
     = (dest_drive & BIOS_FLAG_FIXED_DISK);
   
   /* Read the first sector of Stage 2.  */
-  disk_read_hook = disk_read_savesect_func;
-  if (grub_read (stage2_first_buffer, SECTOR_SIZE) != SECTOR_SIZE)
+  disk_read_hook = install_savesect_helper;
+  if (grub_read (*stage2_first_buffer, SECTOR_SIZE) != SECTOR_SIZE)
     goto fail;
 
-  stage2_first_sector = saved_sector;
+  stage2_first_sector = *saved_sector;
   
   /* Read the second sector of Stage 2.  */
   if (grub_read (stage2_second_buffer, SECTOR_SIZE) != SECTOR_SIZE)
     goto fail;
 
-  stage2_second_sector = saved_sector;
+  stage2_second_sector = *saved_sector;
   
   /* Check for the version of Stage 2.  */
   if (*((short *) (stage2_second_buffer + STAGE2_VER_MAJ_OFFS))
@@ -1950,27 +2174,27 @@
 
   /* If INSTALLADDR is not specified explicitly in the command-line,
      determine it by the Stage 2 id.  */
-  if (! installaddr)
+  if (! *installaddr)
     {
       if (! is_stage1_5)
 	/* Stage 2.  */
-	installaddr = 0x8000;
+	*installaddr = 0x8000;
       else
 	/* Stage 1.5.  */
-	installaddr = 0x2000;
+	*installaddr = 0x2000;
     }
 
   *((unsigned long *) (stage1_buffer + STAGE1_STAGE2_SECTOR))
     = stage2_first_sector;
   *((unsigned short *) (stage1_buffer + STAGE1_STAGE2_ADDRESS))
-    = installaddr;
+    = *installaddr;
   *((unsigned short *) (stage1_buffer + STAGE1_STAGE2_SEGMENT))
-    = installaddr >> 4;
+    = *installaddr >> 4;
 
-  i = (int) stage2_first_buffer + SECTOR_SIZE - 4;
+  i = (int) *stage2_first_buffer + SECTOR_SIZE - 4;
   while (*((unsigned long *) i))
     {
-      if (i < (int) stage2_first_buffer
+      if (i < (int) *stage2_first_buffer
 	  || (*((int *) (i - 4)) & 0x80000000)
 	  || *((unsigned short *) i) >= 0xA00
 	  || *((short *) (i + 2)) == 0)
@@ -1984,13 +2208,13 @@
       i -= 8;
     }
 
-  installlist = (int) stage2_first_buffer + SECTOR_SIZE + 4;
-  installaddr += SECTOR_SIZE;
+  *installlist = (int) *stage2_first_buffer + SECTOR_SIZE + 4;
+  *installaddr += SECTOR_SIZE;
   
   /* Read the whole of Stage2 except for the first sector.  */
   grub_seek (SECTOR_SIZE);
 
-  disk_read_hook = disk_read_blocklist_func;
+  disk_read_hook = install_blocklist_helper;
   if (! grub_read (dummy, -1))
     goto fail;
   
@@ -2051,7 +2275,7 @@
 	      /* If the drive where the Stage 2 resides is the same as
 		 the one where the Stage 1.5 resides, do not embed the
 		 drive number.  */
-	      current_drive = 0xFF;
+	      current_drive = GRUB_INVALID_DRIVE;
 	    }
 
 	  device = (current_drive << 24) | current_partition;
@@ -2073,7 +2297,7 @@
 	  /* Skip the first sector.  */
 	  grub_seek (SECTOR_SIZE);
 	  
-	  disk_read_hook = disk_read_savesect_func;
+	  disk_read_hook = install_savesect_helper;
 	  if (grub_read (stage2_buffer, SECTOR_SIZE) != SECTOR_SIZE)
 	    goto fail;
 	  
@@ -2143,7 +2367,7 @@
 	  else
 #endif /* GRUB_UTIL */
 	    {
-	      if (! devwrite (saved_sector - part_start, 1, stage2_buffer))
+	      if (! devwrite (*saved_sector - part_start, 1, stage2_buffer))
 		goto fail;
 	    }
 	}
@@ -2165,7 +2389,7 @@
 	  goto fail;
 	}
 
-      if (fwrite (stage2_first_buffer, 1, SECTOR_SIZE, fp) != SECTOR_SIZE)
+      if (fwrite (*stage2_first_buffer, 1, SECTOR_SIZE, fp) != SECTOR_SIZE)
 	{
 	  fclose (fp);
 	  errnum = ERR_WRITE;
@@ -2192,7 +2416,7 @@
 	goto fail;
 
       if (! devwrite (stage2_first_sector - src_part_start, 1,
-		      stage2_first_buffer))
+		      *stage2_first_buffer))
 	goto fail;
 
       if (! devwrite (stage2_second_sector - src_part_start, 1,
@@ -3185,8 +3409,29 @@
 savedefault_func (char *arg, int flags)
 {
 #if !defined(SUPPORT_DISKLESS) && !defined(GRUB_UTIL)
-  char buffer[512];
-  int *entryno_ptr;
+  unsigned long tmp_drive = saved_drive;
+  unsigned long tmp_partition = saved_partition;
+  char *default_file = (char *) DEFAULT_FILE_BUF;
+  char buf[10];
+  char sect[SECTOR_SIZE];
+  int entryno;
+  int sector_count = 0;
+  int saved_sectors[2];
+  int saved_offsets[2];
+  int saved_lengths[2];
+
+  /* Save sector information about at most two sectors.  */
+  auto void disk_read_savesect_func (int sector, int offset, int length);
+  void disk_read_savesect_func (int sector, int offset, int length)
+    {
+      if (sector_count < 2)
+	{
+	  saved_sectors[sector_count] = sector;
+	  saved_offsets[sector_count] = offset;
+	  saved_lengths[sector_count] = length;
+	}
+      sector_count++;
+    }
   
   /* This command is only useful when you boot an entry from the menu
      interface.  */
@@ -3195,46 +3440,110 @@
       errnum = ERR_UNRECOGNIZED;
       return 1;
     }
-  
-  /* Get the geometry of the boot drive (i.e. the disk which contains
-     this stage2).  */
-  if (get_diskinfo (boot_drive, &buf_geom))
-    {
-      errnum = ERR_NO_DISK;
-      return 1;
-    }
 
-  /* Load the second sector of this stage2.  */
-  if (! rawread (boot_drive, install_second_sector, 0, SECTOR_SIZE, buffer))
+  /* Determine a saved entry number.  */
+  if (*arg)
     {
-      return 1;
-    }
+      if (grub_memcmp (arg, "fallback", sizeof ("fallback") - 1) == 0)
+	{
+	  int i;
+	  int index = 0;
+	  
+	  for (i = 0; i < MAX_FALLBACK_ENTRIES; i++)
+	    {
+	      if (fallback_entries[i] < 0)
+		break;
+	      if (fallback_entries[i] == current_entryno)
+		{
+		  index = i + 1;
+		  break;
+		}
+	    }
+	  
+	  if (index >= MAX_FALLBACK_ENTRIES || fallback_entries[index] < 0)
+	    {
+	      /* This is the last.  */
+	      errnum = ERR_BAD_ARGUMENT;
+	      return 1;
+	    }
 
-  /* Sanity check.  */
-  if (buffer[STAGE2_STAGE2_ID] != STAGE2_ID_STAGE2
-      || *((short *) (buffer + STAGE2_VER_MAJ_OFFS)) != COMPAT_VERSION)
-    {
-      errnum = ERR_BAD_VERSION;
-      return 1;
+	  entryno = fallback_entries[index];
+	}
+      else if (! safe_parse_maxint (&arg, &entryno))
+	return 1;
     }
-  
-  entryno_ptr = (int *) (buffer + STAGE2_SAVED_ENTRYNO);
+  else
+    entryno = current_entryno;
 
-  /* Check if the saved entry number differs from current entry number.  */
-  if (*entryno_ptr != current_entryno)
-    {
-      /* Overwrite the saved entry number.  */
-      *entryno_ptr = current_entryno;
+  /* Open the default file.  */
+  saved_drive = boot_drive;
+  saved_partition = install_partition;
+  if (grub_open (default_file))
+    {
+      int len;
+      
+      disk_read_hook = disk_read_savesect_func;
+      len = grub_read (buf, sizeof (buf));
+      disk_read_hook = 0;
+      grub_close ();
       
-      /* Save the image in the disk.  */
-      if (! rawwrite (boot_drive, install_second_sector, buffer))
-	return 1;
+      if (len != sizeof (buf))
+	{
+	  /* This is too small. Do not modify the file manually, please!  */
+	  errnum = ERR_READ;
+	  goto fail;
+	}
+
+      if (sector_count > 2)
+	{
+	  /* Is this possible?! Too fragmented!  */
+	  errnum = ERR_FSYS_CORRUPT;
+	  goto fail;
+	}
       
+      /* Set up a string to be written.  */
+      grub_memset (buf, '\n', sizeof (buf));
+      grub_sprintf (buf, "%d", entryno);
+      
+      if (saved_lengths[0] < sizeof (buf))
+	{
+	  /* The file is anchored to another file and the first few bytes
+	     are spanned in two sectors. Uggh...  */
+	  if (! rawread (current_drive, saved_sectors[0], 0, SECTOR_SIZE,
+			 sect))
+	    goto fail;
+	  grub_memmove (sect + saved_offsets[0], buf, saved_lengths[0]);
+	  if (! rawwrite (current_drive, saved_sectors[0], sect))
+	    goto fail;
+
+	  if (! rawread (current_drive, saved_sectors[1], 0, SECTOR_SIZE,
+			 sect))
+	    goto fail;
+	  grub_memmove (sect + saved_offsets[1],
+			buf + saved_lengths[0],
+			sizeof (buf) - saved_lengths[0]);
+	  if (! rawwrite (current_drive, saved_sectors[1], sect))
+	    goto fail;
+	}
+      else
+	{
+	  /* This is a simple case. It fits into a single sector.  */
+	  if (! rawread (current_drive, saved_sectors[0], 0, SECTOR_SIZE,
+			 sect))
+	    goto fail;
+	  grub_memmove (sect + saved_offsets[0], buf, sizeof (buf));
+	  if (! rawwrite (current_drive, saved_sectors[0], sect))
+	    goto fail;
+	}
+
       /* Clear the cache.  */
       buf_track = -1;
     }
 
-  return 0;
+ fail:
+  saved_drive = tmp_drive;
+  saved_partition = tmp_partition;
+  return errnum;
 #else /* ! SUPPORT_DISKLESS && ! GRUB_UTIL */
   errnum = ERR_UNRECOGNIZED;
   return 1;
@@ -3246,8 +3555,10 @@
   "savedefault",
   savedefault_func,
   BUILTIN_CMDLINE,
-  "savedefault",
-  "Save the current entry as the default boot entry."
+  "savedefault [NUM | `fallback']",
+  "Save the current entry as the default boot entry if no argument is"
+  " specified. If a number is specified, this number is saved. If"
+  " `fallback' is used, next fallback entry is saved."
 };
 
 
@@ -3495,7 +3806,10 @@
   int to_code, from_code;
   int map_in_interrupt = 0;
   
-  static int find_key_code (char *key)
+  auto int find_key_code (char *key);
+  auto int find_ascii_code (char *key);
+  
+  auto int find_key_code (char *key)
     {
       int i;
 
@@ -3512,7 +3826,7 @@
       return 0;
     }
   
-  static int find_ascii_code (char *key)
+  auto int find_ascii_code (char *key)
     {
       int i;
       
@@ -3747,7 +4061,9 @@
   {
     {"ext2fs",   "/e2fs_stage1_5"},
     {"fat",      "/fat_stage1_5"},
+    {"ufs2",     "/ufs2_stage1_5"},
     {"ffs",      "/ffs_stage1_5"},
+    {"iso9660",  "/iso9660_stage1_5"},
     {"jfs",      "/jfs_stage1_5"},
     {"minix",    "/minix_stage1_5"},
     {"reiserfs", "/reiserfs_stage1_5"},
@@ -3956,7 +4272,7 @@
 };
 
 
-#if defined(SUPPORT_SERIAL) || defined(SUPPORT_HERCULES)
+#if defined(SUPPORT_SERIAL) || defined(SUPPORT_HERCULES) || defined(SUPPORT_GRAPHICS)
 /* terminal */
 static int
 terminal_func (char *arg, int flags)
@@ -4115,17 +4431,21 @@
  end:
   current_term = term_table + default_term;
   current_term->flags = term_flags;
-  
+
   if (lines)
     max_lines = lines;
   else
-    /* 24 would be a good default value.  */
-    max_lines = 24;
-  
+    max_lines = current_term->max_lines;
+
   /* If the interface is currently the command-line,
      restart it to repaint the screen.  */
-  if (current_term != prev_term && (flags & BUILTIN_CMDLINE))
+  if ((current_term != prev_term) && (flags & BUILTIN_CMDLINE)){
+    if (prev_term->shutdown)
+      prev_term->shutdown();
+    if (current_term->startup)
+      current_term->startup();
     grub_longjmp (restart_cmdline_env, 0);
+  }
   
   return 0;
 }
@@ -4135,7 +4455,7 @@
   "terminal",
   terminal_func,
   BUILTIN_MENU | BUILTIN_CMDLINE | BUILTIN_HELP_LIST,
-  "terminal [--dumb] [--no-echo] [--no-edit] [--timeout=SECS] [--lines=LINES] [--silent] [console] [serial] [hercules]",
+  "terminal [--dumb] [--no-echo] [--no-edit] [--timeout=SECS] [--lines=LINES] [--silent] [console] [serial] [hercules] [graphics]",
   "Select a terminal. When multiple terminals are specified, wait until"
   " you push any key to continue. If both console and serial are specified,"
   " the terminal to which you input a key first will be selected. If no"
@@ -4147,7 +4467,7 @@
   " seconds. The option --lines specifies the maximum number of lines."
   " The option --silent is used to suppress messages."
 };
-#endif /* SUPPORT_SERIAL || SUPPORT_HERCULES */
+#endif /* SUPPORT_SERIAL || SUPPORT_HERCULES || SUPPORT_GRAPHICS */
 
 
 #ifdef SUPPORT_SERIAL
@@ -4666,6 +4986,9 @@
 /* The table of builtin commands. Sorted in dictionary order.  */
 struct builtin *builtin_table[] =
 {
+#ifdef SUPPORT_GRAPHICS
+  &builtin_background,
+#endif
   &builtin_blocklist,
   &builtin_boot,
 #ifdef SUPPORT_NETBOOT
@@ -4673,6 +4996,7 @@
 #endif /* SUPPORT_NETBOOT */
   &builtin_cat,
   &builtin_chainloader,
+  &builtin_clear,
   &builtin_cmp,
   &builtin_color,
   &builtin_configfile,
@@ -4692,6 +5016,9 @@
   &builtin_embed,
   &builtin_fallback,
   &builtin_find,
+#ifdef SUPPORT_GRAPHICS
+  &builtin_foreground,
+#endif
   &builtin_fstest,
   &builtin_geometry,
   &builtin_halt,
@@ -4735,9 +5062,12 @@
 #endif /* SUPPORT_SERIAL */
   &builtin_setkey,
   &builtin_setup,
-#if defined(SUPPORT_SERIAL) || defined(SUPPORT_HERCULES)
+#ifdef SUPPORT_GRAPHICS
+  &builtin_splashimage,
+#endif /* SUPPORT_GRAPHICS */
+#if defined(SUPPORT_SERIAL) || defined(SUPPORT_HERCULES) || defined(SUPPORT_GRAPHICS)
   &builtin_terminal,
-#endif /* SUPPORT_SERIAL || SUPPORT_HERCULES */
+#endif /* SUPPORT_SERIAL || SUPPORT_HERCULES || SUPPORT_GRAPHICS */
 #ifdef SUPPORT_SERIAL
   &builtin_terminfo,
 #endif /* SUPPORT_SERIAL */
diff -Naur grub-0.96.orig/stage2/disk_io.c grub-0.96.reiser4/stage2/disk_io.c
--- grub-0.96.orig/stage2/disk_io.c	2004-05-23 18:35:24.000000000 +0200
+++ grub-0.96.reiser4/stage2/disk_io.c	2005-10-25 15:53:30.000000000 +0200
@@ -63,6 +63,9 @@
 # ifdef FSYS_REISERFS
   {"reiserfs", reiserfs_mount, reiserfs_read, reiserfs_dir, 0, reiserfs_embed},
 # endif
+# ifdef FSYS_REISER4
+  {"reiser4", reiser4_mount, reiser4_read, reiser4_dir, 0, reiser4_embed},
+# endif
 # ifdef FSYS_VSTAFS
   {"vstafs", vstafs_mount, vstafs_read, vstafs_dir, 0, 0},
 # endif
diff -Naur grub-0.96.orig/stage2/filesys.h grub-0.96.reiser4/stage2/filesys.h
--- grub-0.96.orig/stage2/filesys.h	2004-05-14 21:36:43.000000000 +0200
+++ grub-0.96.reiser4/stage2/filesys.h	2005-10-25 15:53:30.000000000 +0200
@@ -77,6 +77,16 @@
 #define FSYS_REISERFS_NUM 0
 #endif
 
+#ifdef FSYS_REISER4
+#define FSYS_REISER4_NUM 1
+int reiser4_mount (void);
+int reiser4_read (char *buf, int len);
+int reiser4_dir (char *dirname);
+int reiser4_embed (int *start_sector, int needed_sectors);
+#else
+#define FSYS_REISER4_NUM 0
+#endif
+
 #ifdef FSYS_VSTAFS
 #define FSYS_VSTAFS_NUM 1
 int vstafs_mount (void);
@@ -127,8 +137,8 @@
 #ifndef NUM_FSYS
 #define NUM_FSYS	\
   (FSYS_FFS_NUM + FSYS_FAT_NUM + FSYS_EXT2FS_NUM + FSYS_MINIX_NUM	\
-   + FSYS_REISERFS_NUM + FSYS_VSTAFS_NUM + FSYS_JFS_NUM + FSYS_XFS_NUM	\
-   + FSYS_TFTP_NUM + FSYS_ISO9660_NUM + FSYS_UFS2_NUM)
+   + FSYS_REISERFS_NUM + FSYS_REISER4_NUM + FSYS_VSTAFS_NUM + FSYS_JFS_NUM \
+   + FSYS_XFS_NUM + FSYS_TFTP_NUM + FSYS_ISO9660_NUM + FSYS_UFS2_NUM)
 #endif
 
 /* defines for the block filesystem info area */
diff -Naur grub-0.96.orig/stage2/fsys_reiser4.c grub-0.96.reiser4/stage2/fsys_reiser4.c
--- grub-0.96.orig/stage2/fsys_reiser4.c	1970-01-01 01:00:00.000000000 +0100
+++ grub-0.96.reiser4/stage2/fsys_reiser4.c	2005-10-25 15:53:30.000000000 +0200
@@ -0,0 +1,260 @@
+/* 
+ *  fsys_reiser4.c -- reiser4 filesystem support.
+ *  Copyright (C) 2000, 2001   Free Software Foundation, Inc.
+ *  
+ *  GRUB  --  GRand Unified Bootloader
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifdef FSYS_REISER4
+#include "shared.h"
+#include "filesys.h"
+
+#define ENABLE_MINIMAL
+#include <reiser4/libreiser4.h>
+
+static reiser4_fs_t *fs = NULL;
+static aal_device_t *dev = NULL;
+static reiser4_object_t *object = NULL;
+
+/* Read callback of grub specific device. It uses devread() for reading passed
+   @count of device blocks starting from @blk to passed @buff. */
+static errno_t grub_dev_read(aal_device_t *device,
+			     void *buff, blk_t blk,
+			     count_t count)
+{
+	unsigned int size;
+	unsigned int factor;
+	unsigned int sector;
+
+	/* Calculating actual sector and size in bytes to be read from
+	   device. */
+	factor = device->blksize / SECTOR_SIZE;
+	sector = (unsigned int)blk << aal_log2(factor);
+	size = (unsigned int)count * (SECTOR_SIZE * factor);
+	
+	/* Reading from the current device */
+        if (!devread(sector, 0, size, buff))
+    	        return -EIO;
+		
+	return 0;
+}
+
+/* Length callback of grub device */
+static count_t grub_dev_len(aal_device_t *device) {
+	unsigned int factor;
+
+	/* Getting partition length in device blocks */
+	factor = device->blksize / SECTOR_SIZE;
+	return (part_length >> aal_log2(factor));
+}
+
+/*
+  Initializing grub device abstraction instance. It will use devread and friends
+  for providing needed functionality.
+*/
+struct aal_device_ops grub_dev_ops = {
+	.read   = grub_dev_read,
+	.len    = grub_dev_len
+};
+
+/* Initializes reiser4 */
+static int reiser4_init(void) {
+	extern aal_hash_table_t *plugins;
+	
+	plugins = NULL;
+
+	/* Initializing memory manager */
+	aal_mem_init((void *)FSYS_BUF, FSYS_BUFLEN);
+
+	/* Initializing device abstraction on current device GRUB uses. */
+	if (!(dev = aal_device_open(&grub_dev_ops, NULL,
+				    SECTOR_SIZE, 0)))
+	{
+		return 0;
+	}
+
+	/* Initializing libreiser4 (plugins, etc) */
+	return !libreiser4_init();
+}
+
+#define MEMORY_WATERMARK 8192
+
+/* Memory pressure detect function. */
+static int mpressure_detect(reiser4_tree_t *tree) {
+	return (aal_mem_free() <= MEMORY_WATERMARK);
+}
+
+/* Reiser4 mount() routine */
+int reiser4_mount(void) {
+	
+	/* Initialize all reiser4 related stuff first */
+	if (!reiser4_init())
+		return 0;
+	
+	/* Open filesystem on @dev. */
+	if (!(fs = reiser4_fs_open(dev)))
+		return 0;
+
+	fs->tree->mpc_func = mpressure_detect;
+	
+	object = NULL;
+	return 1;
+}
+
+/* Reiser4 read() handler */
+int reiser4_read(char *buf, int len) {
+	int64_t read;
+
+	if (object == NULL)
+		return 0;
+
+	/* Seet at current position denoted by @filepos */
+	if (objplug(object)->o.object_ops->seek) {
+		plug_call(objplug(object)->o.object_ops,
+			  seek, object->ent, filepos);
+	}
+	
+	/* Reading current file data starting from @filepos */
+	disk_read_func = disk_read_hook;
+	read = objplug(object)->o.object_ops->read ?
+		plug_call(objplug(object)->o.object_ops, read, 
+			  object->ent, buf, len) : -EINVAL;
+	disk_read_func = NULL;
+
+	if (read < 0) {
+		errnum = ERR_FSYS_CORRUPT;
+		return 0;
+	}
+
+    	filepos += read;
+	return read;
+}
+
+/* Reiser4 file open() routine */
+int reiser4_dir(char *dirname) {
+	char *ch;
+	
+	if (fs == NULL)
+		return 0;
+
+	if (object != NULL) {
+		plug_call(objplug(object)->o.object_ops, 
+			  close, object->ent);
+		aal_free(object);
+		object = NULL;
+	}
+
+	/* Cutting out string after first space character */
+    	if ((ch = aal_strchr(dirname, ' ')))
+		*ch = '\0';
+		
+	/* This function is also called for getting directory list for
+	   maintaining the bash-like completion. */
+#ifndef STAGE1_5
+	if (print_possibilities) {
+		char entry[256];
+		entry_hint_t entry_hint;
+		
+		/* Getting last part of name (jsut after last '/') */
+		if (*(dirname + aal_strlen(dirname) - 1) != '/') {
+		
+			if (!(ch = aal_strrchr(dirname, '/'))) {
+				errnum = ERR_BAD_FILETYPE;
+				return 0;
+			}
+
+			aal_strncpy(entry, ch + 1, sizeof(entry));
+			*(ch + 1) = '\0';
+		} else {
+			aal_memset(entry, 0, sizeof(entry));
+		}
+
+		/* Open obejct by @dirname */
+		if (!(object = reiser4_semantic_open(fs->tree, dirname, 
+						     NULL, 1))) 
+		{
+			errnum = ERR_FILE_NOT_FOUND;
+			return 0;
+		}
+
+		/* Checking if it is a directory object */
+		if (object->ent->opset.plug[OPSET_OBJ]->id.group != DIR_OBJECT)
+		{
+			/* If not, cutting out last '/' character */
+    			if ((ch = aal_strrchr(dirname, '/')))
+				*ch = '\0';
+
+			/* Close current object */
+			plug_call(objplug(object)->o.object_ops, 
+				  close, object->ent);
+			aal_free(object);
+			return 0;
+		}
+		
+		/* Reading the opened directory to build the completion list. */
+		if (objplug(object)->o.object_ops->readdir) {
+			while (plug_call(objplug(object)->o.object_ops, readdir,
+					 object->ent, &entry_hint) > 0) 
+			{
+				if (substring(entry, entry_hint.name) <= 0) {
+					if (print_possibilities > 0)
+						print_possibilities = 
+							-print_possibilities;
+				
+					print_a_completion(entry_hint.name);
+				}
+			}
+		}
+	} else {
+#endif
+		/* This is the case when resier4_dir() is called for open the
+		   file @dirname, not for building completion list. */
+		if (!(object = reiser4_semantic_open(fs->tree, dirname,
+						     NULL, 1))) 
+		{
+			errnum = ERR_FILE_NOT_FOUND;
+			return 0;
+		}
+		
+		if (object->ent->opset.plug[OPSET_OBJ]->id.group != REG_OBJECT)
+		{
+			errnum = ERR_BAD_FILETYPE;
+			return 0;
+		}
+		
+		/* Initializing GRUB global variables @filepos and @filemax. */
+		filepos = 0;
+		filemax = reiser4_object_size(object);
+	
+		return 1;
+#ifndef STAGE1_5
+	}
+
+	return 1;
+#endif
+
+	errnum = ERR_FILE_NOT_FOUND;
+	return 0;
+}
+
+/* Returns how many sectors may be used for embeding reiser4_stage1_5 in teh
+   case of installing GRUB to partition instead of MBR. */
+int reiser4_embed (int *start_sector, int needed_sectors) {
+	*start_sector = 1;
+	return needed_sectors <= ((REISER4_MASTER_OFFSET >> SECTOR_BITS) - 1);
+}
+#endif /* FSYS_REISER4 */
diff -Naur grub-0.96.orig/stage2/shared.h grub-0.96.reiser4/stage2/shared.h
--- grub-0.96.orig/stage2/shared.h	2005-10-25 16:05:57.118965526 +0200
+++ grub-0.96.reiser4/stage2/shared.h	2005-10-25 15:53:30.000000000 +0200
@@ -207,11 +207,12 @@
 #define STAGE2_ID_FAT_STAGE1_5		3
 #define STAGE2_ID_MINIX_STAGE1_5	4
 #define STAGE2_ID_REISERFS_STAGE1_5	5
-#define STAGE2_ID_VSTAFS_STAGE1_5	6
-#define STAGE2_ID_JFS_STAGE1_5		7
-#define STAGE2_ID_XFS_STAGE1_5		8
-#define STAGE2_ID_ISO9660_STAGE1_5	9
-#define STAGE2_ID_UFS2_STAGE1_5		10
+#define STAGE2_ID_REISER4_STAGE1_5	6
+#define STAGE2_ID_VSTAFS_STAGE1_5	7
+#define STAGE2_ID_JFS_STAGE1_5		8
+#define STAGE2_ID_XFS_STAGE1_5		9
+#define STAGE2_ID_ISO9660_STAGE1_5	10
+#define STAGE2_ID_UFS2_STAGE1_5		11
 
 #ifndef STAGE1_5
 # define STAGE2_ID	STAGE2_ID_STAGE2
@@ -226,6 +227,8 @@
 #  define STAGE2_ID	STAGE2_ID_MINIX_STAGE1_5
 # elif defined(FSYS_REISERFS)
 #  define STAGE2_ID	STAGE2_ID_REISERFS_STAGE1_5
+# elif defined(FSYS_REISER4)
+#  define STAGE2_ID	STAGE2_ID_REISER4_STAGE1_5
 # elif defined(FSYS_VSTAFS)
 #  define STAGE2_ID	STAGE2_ID_VSTAFS_STAGE1_5
 # elif defined(FSYS_JFS)