dmesg

dmesg.txt (text/plain), 16.04 KB, created by David on 2005-09-08 16:03:02 UTC

Linux version 2.6.12-gentoo-r10 (root@dalia) (gcc version 3.3.5-20050130 (Gentoo 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #18 SMP Thu Sep 8 05:12:28 EDT 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000037f40000 (usable)
 BIOS-e820: 0000000037f40000 - 0000000037f50000 (ACPI data)
 BIOS-e820: 0000000037f50000 - 0000000038000000 (ACPI NVS)
 BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
895MB LOWMEM available.
On node 0 totalpages: 229184
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 225088 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM                                ) @ 0x000fad90
ACPI: RSDT (v001 A M I  OEMRSDT  0x10000411 MSFT 0x00000097) @ 0x37f40000
ACPI: FADT (v001 A M I  OEMFACP  0x10000411 MSFT 0x00000097) @ 0x37f40200
ACPI: ECDT (v001 A M I  OEMECDT  0x10000411 MSFT 0x00000097) @ 0x37f40360
ACPI: OEMB (v001 A M I  OEMBIOS  0x10000411 MSFT 0x00000097) @ 0x37f50040
ACPI: DSDT (v001  A0009 A0009000 0x00000000 INTL 0x20030522) @ 0x00000000
Allocating PCI resources starting at 38000000 (gap: 38000000:c77c0000)
Built 1 zonelists
Kernel command line: root=/dev/hda1 splash=silent,theme:DangerGirl quiet CONSOLE=/dev/tty1 video=vesafb:ywrap,1024x768-16@70
Found and enabled local APIC!
mapped APIC to ffffd000 (fee00000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1600.483 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 902688k/916736k available (3178k kernel code, 13500k reserved, 1246k data, 252k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3170.30 BogoMIPS (lpj=1585152)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: After vendor identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbbf 00000000 00000000 00000040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
 tbxface-0118 [02] acpi_load_tables      : ACPI Tables successfully acquired
Parsing all Control Methods:.................................................................................................................................................................................................................................
Table [DSDT](id F004) - 796 Objects with 50 Devices 225 Methods 25 Regions
ACPI Namespace successfully loaded at root c05b6a20
ACPI: setting ELCR to 0200 (from 0eb0)
evxfevnt-0094 [03] acpi_enable           : Transition to ACPI mode successful
CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
SMP motherboard not detected.
Brought up 1 CPUs
CPU0 attaching sched-domain:
 domain 0: span 01
  groups: 01
  domain 1: span 01
   groups: 01
checking if image is initramfs... it is
Freeing initrd memory: 289k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
evgpeblk-0979 [06] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-0987 [06] ev_create_gpe_block   : Found 4 Wake, Enabled 1 Runtime GPEs in this block
ACPI: Found ECDT
Completing Region/Field/Buffer/Package initialization:....................................................................................................
Initialized 24/25 Regions 22/22 Fields 28/28 Buffers 26/26 Packages (805 nodes)
Executing all Device _STA and_INI methods:...........................evregion-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME
 psparse-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (Node dff94ce8), AE_TIME
 psparse-1138: *** Error: Method execution failed [\ECIO] (Node dff94368), AE_TIME
 psparse-1138: *** Error: Method execution failed [\_SB_.PCI0.BAT0._STA] (Node dff93568), AE_TIME
  uteval-0158: *** Error: Method execution failed [\_SB_.PCI0.BAT0._STA] (Node dff93568), AE_TIME
...........................
54 Devices found containing: 53 _STA, 3 _INI methods
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: Embedded Controller [EC0] (gpe 6)
evregion-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME
 psparse-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (Node dff94ce8), AE_TIME
 psparse-1138: *** Error: Method execution failed [\ECIO] (Node dff94368), AE_TIME
 psparse-1138: *** Error: Method execution failed [\_SB_.PCI0.BAT0._STA] (Node dff93568), AE_TIME
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
evregion-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME
 psparse-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (Node dff94ce8), AE_TIME
 psparse-1138: *** Error: Method execution failed [\ECIO] (Node dff94368), AE_TIME
 psparse-1138: *** Error: Method execution failed [\_SB_.PCI0.BAT0._STA] (Node dff93568), AE_TIME
  uteval-0158: *** Error: Method execution failed [\_SB_.PCI0.BAT0._STA] (Node dff93568), AE_TIME
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:06: ioport range 0x228-0x22f has been reserved
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1126205660.905:0): initialized
inotify device minor=63
Installing knfsd (copyright (C) 1996 [e-mail]).
Initializing Cryptographic API
lp: driver loaded but no devices found
Linux agpgart interface v0.101 (c) Dave Jones
[drm] Initialized drm 1.0.0 20040925
vesafb: ATI Technologies Inc., BS3 , 01.00 (OEM: ATI MOBILITY RADEON 9100 IGP)
vesafb: VBE version: 2.0
vesafb: protected mode interface info at c000:520f
vesafb: pmi: set display start = c00c527d, set palette = c00c52b7
vesafb: pmi: ports = e010 e016 e054 e038 e03c e05c e000 e004 e0b0 e0b2 e0b4 
vesafb: monitor limits: vf = 0 Hz, hf = 0 kHz, clk = 0 MHz
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=1536
Console: switching to colour frame buffer device 128x48
fbsplash: console 0 using theme 'DangerGirl'
fbsplash: switched splash state to 'on' on console 0
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 3072k, total 131072k
fb0: VESA VGA frame buffer device
evregion-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME
 psparse-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (Node dff94ce8), AE_TIME
 psparse-1138: *** Error: Method execution failed [\ECIO] (Node dff94368), AE_TIME
 psparse-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.ACPS] (Node dff94de8), AE_TIME
 psparse-1138: *** Error: Method execution failed [\ACPS] (Node dff8eae8), AE_TIME
 psparse-1138: *** Error: Method execution failed [\_SB_.PCI0.AC0_._PSR] (Node dff938e8), AE_TIME
 acpi_ac-0098 [10] acpi_ac_get_state     : Error reading AC Adapter state
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
acpi_processor-0210 [14] acpi_processor_get_thr: duty_cycle spans bit 4
ACPI: Thermal Zone [THRM] (58 C)
Asus Laptop ACPI Extras version 0.29
  L4R model detected, supported
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
mice: PS/2 mouse device common for all mice
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
input: AT Translated Set 2 keyboard on isa0060/serio0
alps.c: Enabling hardware tapping
input: PS/2 Mouse on isa0060/serio4
input: AlpsPS/2 ALPS GlidePoint on isa0060/serio4
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
b44.c:v0.95 (Aug 3, 2004)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 7 (level, low) -> IRQ 7
eth0: Broadcom 4400 10/100BaseT Ethernet 00:11:2f:5f:51:04
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hda: ST94811A, ATA DISK drive
Probing IDE interface ide1...
hdc: TOSHIBA DVD-ROM SD-R2512, ATAPI CD/DVD-ROM drive
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 78140160 sectors (40007 MB) w/8192KiB Cache, CHS=16383/255/63
hda: cache flushes supported
 hda: hda1 hda2
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
libata version 1.11 loaded.
ohci1394: $Rev: 1250 $ Ben Collins <[e-mail]>
ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNKC] -> GSI 7 (level, low) -> IRQ 7
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[7]  MMIO=[fe000000-fe0007ff]  Max Packet=[2048]
ieee1394: raw1394: /dev/raw1394 device initialized
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:13.2: ATI Technologies Inc EHCI USB Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 10, io mem 0xfeb00000
ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
hub 1-0:1.0: over-current change on port 1
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:13.0: ATI Technologies Inc OHCI USB Controller #1
hub 1-0:1.0: over-current change on port 6
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 10, io mem 0xfe900000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:13.1: ATI Technologies Inc OHCI USB Controller #2
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 10, io mem 0xfea00000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
USB Universal Host Controller Interface driver v2.2
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.9rc2  (Thu Mar 24 10:33:39 2005 UTC).
ACPI: PCI Interrupt 0000:00:14.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
ALSA device list:
  #0: ATI IXP rev 0 with AD1980 at 0xfe700000, irq 5
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 64Kbytes
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
ip_conntrack version 2.1 (7162 buckets, 57296 max) - 220 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <[e-mail]>.  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices: 
MC97 USB1 USB2 P0P2 BLAN SLPB 
ACPI: (supports S0 S1 S3 S4 S5)
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 252k freed
kjournald starting.  Commit interval 5 seconds
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e01800031df55e]
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Adding 506008k swap on /dev/hda2.  Priority:-1 extents:1
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
EXT3 FS on hda1, internal journal
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, 1.0.3
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[e-mail]>
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.6
ipw2200: Copyright(c) 2003-2004 Intel Corporation
ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
NETDEV WATCHDOG: eth0: transmit timed out
b44: eth0: transmit timed out, resetting
b44: eth0: Link is down.
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
vmmon: module license 'unspecified' taints kernel.
/dev/vmmon[7433]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[7433]: Module vmmon: initialized
/dev/vmnet: open called by PID 7482 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: enabling the bridge
bridge-eth0: up
bridge-eth0: already up
bridge-eth0: attached
/dev/vmnet: open called by PID 7491 (vmnet-bridge)
/dev/vmnet: hub 2 does not exist, allocating memory.
/dev/vmnet: port on hub 2 successfully opened
bridge-eth1: peer interface eth1 not found, will wait for it to come up
bridge-eth1: attached