Linux version 2.4.19-xfs-r1 (root@inventor.gentoo.org) (gcc version 3.2) #1 SMP Sat Sep 14 17:15:33 Local time zone must be set--see zic BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000005fd0000 (usable) BIOS-e820: 0000000005fd0000 - 0000000005fdf000 (ACPI data) BIOS-e820: 0000000005fdf000 - 0000000005fe0000 (ACPI NVS) BIOS-e820: 0000000005fe0000 - 0000000006000000 (reserved) BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) 95MB LOWMEM available. Advanced speculative caching feature not present On node 0 totalpages: 24528 zone(0): 4096 pages. zone(1): 20432 pages. zone(2): 0 pages. IBM machine detected. Enabling interrupts during APM calls. Kernel command line: BOOT_IMAGE=linux initrd=initrd root=/dev/ram0 init=/linuxrc noacpi Local APIC disabled by BIOS -- reenabling. Could not enable APIC! Initializing CPU#0 Detected 265.268 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 529.20 BogoMIPS Memory: 91520k/98112k available (2722k kernel code, 6204k reserved, 995k data, 552k init, 0k highmem) Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode cache hash table entries: 8192 (order: 4, 65536 bytes) Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000 CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000 CPU: Common caps: 0183f9ff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000 CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000 CPU: Common caps: 0183f9ff 00000000 00000000 00000000 CPU0: Intel Pentium II (Deschutes) stepping 00 per-CPU timeslice cutoff: 1464.04 usecs. SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Waiting on wait_init_idle (map = 0x0) All processors have done init_idle PCI: PCI BIOS revision 2.10 entry at 0xfd880, last bus=6 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 PCI: Found IRQ 11 for device 00:02.0 PCI: Sharing IRQ 11 with 00:03.0 PCI: Found IRQ 11 for device 00:02.1 Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Journalled Block Device driver loaded devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 pty: 256 Unix98 ptys configured Real Time Clock Driver v1.10e Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfcf8-0xfcff, BIOS settings: hdc:DMA, hdd:pio hda: FUJITSU MHN2100AT, ATA DISK drive hdc: TOSHIBA CD-ROM XM-1702BC, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 19640880 sectors (10056 MB) w/2048KiB Cache, CHS=1299/240/63, UDMA(33) hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 > 0 3c515 cards found. smc-ultra.c: No ISAPnP cards found, trying standard ones... cs89x0:cs89x0_probe(0x0) PP_addr=0xffff eth0: incorrect signature 0xffff PP_addr=0xffff eth0: incorrect signature 0xffff PP_addr=0xffff eth0: incorrect signature 0xffff PP_addr=0xffff eth0: incorrect signature 0xffff PP_addr=0xffff eth0: incorrect signature 0xffff PP_addr=0xaaaa eth0: incorrect signature 0x2a2a PP_addr=0xffff eth0: incorrect signature 0xffff PP_addr=0xffff eth0: incorrect signature 0xffff PP_addr=0xffff eth0: incorrect signature 0xffff PP_addr=0xffff eth0: incorrect signature 0xffff PP_addr=0xffff eth0: incorrect signature 0xffff PP_addr=0xffff eth0: incorrect signature 0xffff cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP eth0: D-Link DE-600 pocket adapter: not at I/O 0x378. D-Link DE-620 pocket adapter not identified in the printer port eth1: D-Link DE-600 pocket adapter: not at I/O 0x378. D-Link DE-620 pocket adapter not identified in the printer port eth2: D-Link DE-600 pocket adapter: not at I/O 0x378. D-Link DE-620 pocket adapter not identified in the printer port eth3: D-Link DE-600 pocket adapter: not at I/O 0x378. D-Link DE-620 pocket adapter not identified in the printer port eth4: D-Link DE-600 pocket adapter: not at I/O 0x378. D-Link DE-620 pocket adapter not identified in the printer port eth5: D-Link DE-600 pocket adapter: not at I/O 0x378. D-Link DE-620 pocket adapter not identified in the printer port eth6: D-Link DE-600 pocket adapter: not at I/O 0x378. D-Link DE-620 pocket adapter not identified in the printer port eth7: D-Link DE-600 pocket adapter: not at I/O 0x378. D-Link DE-620 pocket adapter not identified in the printer port RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15 FW Version=$Version$ pcnet32.c:v1.27a 10.02.2002 tsbogend@alpha.franken.de ThunderLAN driver v1.15 TLAN: 0 devices installed, PCI: 0 EISA: 0 dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) ns83820.c: National Semiconductor DP83820 10/100/1000 driver. atp.c:v1.09 8/9/2000 Donald Becker http://www.scyld.com/network/atp.html SCSI subsystem driver Revision: 1.00 sim710: No NCR53C710 adapter found. Loading Adaptec I2O RAID: Version 2.4 Build 5 Detecting Adaptec I2O RAID controllers... Red Hat/Adaptec aacraid driver, Sep 14 2002 scsi: Detection failed (no card) NCR53c406a: no available ports found sym53c416.c: Version 1.0.0-ac Failed initialization of WD-7000 SCSI card! DC390: 0 adapters found megaraid: v1.18 (Release Date: Thu Oct 11 15:02:53 EDT 2001) megaraid: no BIOS enabled. aec671x_detect: 3ware Storage Controller device driver for Linux v1.02.00.025. 3w-xxxx: No cards with valid units found. kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 17:17:18 Sep 14 2002 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 11 for device 00:07.2 usb-uhci.c: USB UHCI at I/O 0x8400, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice evms: md raid5: measuring checksumming speed evms: md raid5: 8regs : 438.800 MB/sec evms: md raid5: 32regs : 263.600 MB/sec evms: md raid5: pII_mmx : 595.200 MB/sec evms: md raid5: p5_mmx : 611.600 MB/sec evms: md raid5: using function: p5_mmx (611.600 MB/sec) evms: EVMS v1.1.0 initializing .... info level(5). evms: Exporting EVMS Volume(117,1) from "/dev/evms/hda1". evms: Exporting EVMS Volume(117,2) from "/dev/evms/hda5". evms: Exporting EVMS Volume(117,3) from "/dev/evms/hda6". evms: Exporting EVMS Volume(117,4) from "/dev/evms/hda7". evms: Exporting EVMS Volume(117,5) from "/dev/evms/hda8". evms: Exporting EVMS Volume(117,6) from "/dev/evms/hda9". NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 8192) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 403k freed VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 552k freed Compaq CISS Driver (v 2.4.5) Compaq SMART2 Driver (v 2.4.21) Unable to handle kernel paging request at virtual address 86818a40 printing eip: 8030a7f2 *pde = 05f19067 *pte = 00000000 Oops: 0002 CPU: 0 EIP: 0010:[<8030a7f2>] Not tainted EFLAGS: 00010282 eax: 86818a40 ebx: ffffffea ecx: 00000001 edx: 00000001 esi: 868159c0 edi: 00000000 ebp: 86811000 esp: 858b3f08 ds: 0018 es: 0018 ss: 0018 Process insmod (pid: 42, stackpage=858b3000) Stack: ffffffea 00000000 00000000 86811e35 868159c0 86814f00 ffffffea 86811595 8011e26b 00000000 080fc8f0 000049e8 00000060 00000060 00000008 8114a240 85820000 85821000 00000060 80446a00 86811060 00004a24 00000000 00000000 Call Trace: [<86811e35>] [<868159c0>] [<86814f00>] [<86811595>] [<8011e26b>] [<86811060>] [<80109283>] Code: 89 30 8b 1d 48 9b 47 80 31 ff 81 fb 48 9b 47 80 89 35 54 9b <7>ISO 9660 Extensions: RRIP_1991A