Calculating dependencies ... done! >>> Verifying ebuild manifests >>> Running pre-merge checks for gnome-base/gnome-light-3.14.0 >>> Emerging (1 of 10) gnome-base/gnome-shell-3.14.3::gentoo * gnome-shell-3.14.3.tar.xz SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ] >>> Unpacking source... >>> Unpacking gnome-shell-3.14.3.tar.xz to /var/tmp/portage/gnome-base/gnome-shell-3.14.3/work >>> Source unpacked in /var/tmp/portage/gnome-base/gnome-shell-3.14.3/work >>> Preparing source in /var/tmp/portage/gnome-base/gnome-shell-3.14.3/work/gnome-shell-3.14.3 ... * Applying gnome-shell-3.14.0-defaults.patch ... [ ok ] * Applying gnome-shell-3.12-bluetooth-flag.patch ... [ ok ] * Applying gnome-shell-3.14.0-bluetooth-gold.patch ... [ ok ] * Running eautoreconf in '/var/tmp/portage/gnome-base/gnome-shell-3.14.3/work/gnome-shell-3.14.3' ... * Running intltoolize --automake --copy --force ... [ ok ] * Skipping 'gtkdocize --copy' due gtkdocize not installed * Running libtoolize --install --copy --force --automake ... [ ok ] * Running aclocal -I m4 ... [ ok ] * Running autoconf --force ... [ ok ] * Running autoheader ... [ ok ] * Running automake --add-missing --copy --foreign --force-missing ... [ ok ] * Running elibtoolize in: gnome-shell-3.14.3/ * Running elibtoolize in: gnome-shell-3.14.3/config/ * Applying portage/1.2.0 patch ... * Applying sed/1.5.6 patch ... * Fixing OMF Makefiles ... [ ok ] * Disabling deprecation warnings ... [ ok ] >>> Source prepared. >>> Configuring source in /var/tmp/portage/gnome-base/gnome-shell-3.14.3/work/gnome-shell-3.14.3 ... * econf: updating gnome-shell-3.14.3/config/config.guess with /usr/share/gnuconfig/config.guess * econf: updating gnome-shell-3.14.3/config/config.sub with /usr/share/gnuconfig/config.sub ./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-dependency-tracking --disable-silent-rules --libdir=/usr/lib64 --docdir=/usr/share/doc/gnome-shell-3.14.3 --enable-compile-warnings=minimum --disable-schemas-compile --disable-maintainer-mode --disable-gtk-doc --enable-browser-plugin --enable-man --enable-systemd --without-bluetooth --enable-networkmanager BROWSER_PLUGIN_DIR=/usr/lib64/nsbrowser/plugins checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether UID '250' is supported by ustar format... yes checking whether GID '250' is supported by ustar format... yes checking how to create a ustar tar archive... gnutar checking whether to enable maintainer-specific portions of Makefiles... no checking whether make supports nested variables... (cached) yes checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether x86_64-pc-linux-gnu-gcc accepts -g... yes checking for x86_64-pc-linux-gnu-gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of x86_64-pc-linux-gnu-gcc... none checking for x86_64-pc-linux-gnu-g++... x86_64-pc-linux-gnu-g++ checking whether we are using the GNU C++ compiler... yes checking whether x86_64-pc-linux-gnu-g++ accepts -g... yes checking dependency style of x86_64-pc-linux-gnu-g++... none checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by x86_64-pc-linux-gnu-gcc... /usr/x86_64-pc-linux-gnu/bin/ld checking if the linker (/usr/x86_64-pc-linux-gnu/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/x86_64-pc-linux-gnu-nm -B checking the name lister (/usr/bin/x86_64-pc-linux-gnu-nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/x86_64-pc-linux-gnu/bin/ld option to reload object files... -r checking for x86_64-pc-linux-gnu-objdump... x86_64-pc-linux-gnu-objdump checking how to recognize dependent libraries... pass_all checking for x86_64-pc-linux-gnu-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for x86_64-pc-linux-gnu-ar... x86_64-pc-linux-gnu-ar checking for archiver @FILE support... @ checking for x86_64-pc-linux-gnu-strip... x86_64-pc-linux-gnu-strip checking for x86_64-pc-linux-gnu-ranlib... x86_64-pc-linux-gnu-ranlib checking command to parse /usr/bin/x86_64-pc-linux-gnu-nm -B output from x86_64-pc-linux-gnu-gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for x86_64-pc-linux-gnu-mt... no checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... x86_64-pc-linux-gnu-gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if x86_64-pc-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no checking for x86_64-pc-linux-gnu-gcc option to produce PIC... -fPIC -DPIC checking if x86_64-pc-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes checking if x86_64-pc-linux-gnu-gcc static flag -static works... yes checking if x86_64-pc-linux-gnu-gcc supports -c -o file.o... yes checking if x86_64-pc-linux-gnu-gcc supports -c -o file.o... (cached) yes checking whether the x86_64-pc-linux-gnu-gcc linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking how to run the C++ preprocessor... x86_64-pc-linux-gnu-g++ -E checking for ld used by x86_64-pc-linux-gnu-g++... /usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64 checking if the linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the x86_64-pc-linux-gnu-g++ linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes checking for x86_64-pc-linux-gnu-g++ option to produce PIC... -fPIC -DPIC checking if x86_64-pc-linux-gnu-g++ PIC flag -fPIC -DPIC works... yes checking if x86_64-pc-linux-gnu-g++ static flag -static works... yes checking if x86_64-pc-linux-gnu-g++ supports -c -o file.o... yes checking if x86_64-pc-linux-gnu-g++ supports -c -o file.o... (cached) yes checking whether the x86_64-pc-linux-gnu-g++ linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether NLS is requested... yes checking for intltool >= 0.40... 0.50.2 found checking for intltool-update... /usr/bin/intltool-update checking for intltool-merge... /usr/bin/intltool-merge checking for intltool-extract... /usr/bin/intltool-extract checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/gmsgfmt checking for perl... /usr/bin/perl checking for perl >= 5.8.1... 5.20.2 checking for XML::Parser... ok checking for x86_64-pc-linux-gnu-pkg-config... /usr/bin/x86_64-pc-linux-gnu-pkg-config checking pkg-config is at least version 0.22... yes checking for xsltproc... /usr/bin/xsltproc checking for x86_64-pc-linux-gnu-pkg-config... (cached) /usr/bin/x86_64-pc-linux-gnu-pkg-config checking pkg-config is at least version 0.16... yes checking for a Python interpreter with version >= 2.5... python checking for python... /usr/bin/python checking for python version... 2.7 checking for python platform... linux2 checking for python script directory... ${prefix}/lib64/python2.7/site-packages checking for python extension module directory... ${exec_prefix}/lib64/python2.7/site-packages checking for GStreamer (needed for recording functionality)... yes checking for TEST_SHELL_RECORDER... yes checking for libsystemd-journal... yes yes checking for GNOME_SHELL... yes checking for MUTTER... yes checking for GNOME_SHELL_JS... yes checking for ST... yes checking for SHELL_PERF_HELPER... yes checking for SHELL_HOTPLUG_SNIFFER... yes checking for TRAY... yes checking for GVC... yes checking for DESKTOP_SCHEMAS... yes checking for CARIBOU... yes checking for BROWSER_PLUGIN... yes checking for bluetooth support... no checking for CALENDAR_SERVER... yes Package gnome-keybindings was not found in the pkg-config search path. Perhaps you should add the directory containing `gnome-keybindings.pc' to the PKG_CONFIG_PATH environment variable No package 'gnome-keybindings' found checking for gobject-introspection... yes checking for fdwalk... no checking for mallinfo... yes checking sys/resource.h usability... yes checking sys/resource.h presence... yes checking for sys/resource.h... yes checking for _NL_TIME_FIRST_WEEKDAY... yes checking for NETWORKMANAGER... no configure: error: Couldn't find NetworkManager. !!! Please attach the following file when seeking support: !!! /var/tmp/portage/gnome-base/gnome-shell-3.14.3/work/gnome-shell-3.14.3/config.log * ERROR: gnome-base/gnome-shell-3.14.3::gentoo failed (configure phase): * econf failed * * Call stack: * ebuild.sh, line 93: Called src_configure * environment, line 4730: Called gnome2_src_configure '--enable-browser-plugin' '--enable-man' '--enable-systemd' '--without-bluetooth' '--enable-networkmanager' 'BROWSER_PLUGIN_DIR=/usr/lib64/nsbrowser/plugins' * environment, line 2934: Called econf '--docdir=/usr/share/doc/gnome-shell-3.14.3' '--enable-compile-warnings=minimum' '--disable-schemas-compile' '--disable-maintainer-mode' '--disable-gtk-doc' '--enable-browser-plugin' '--enable-man' '--enable-systemd' '--without-bluetooth' '--enable-networkmanager' 'BROWSER_PLUGIN_DIR=/usr/lib64/nsbrowser/plugins' * phase-helpers.sh, line 584: Called die * The specific snippet of code: * die "econf failed" * * If you need support, post the output of `emerge --info '=gnome-base/gnome-shell-3.14.3::gentoo'`, * the complete build log and the output of `emerge -pqv '=gnome-base/gnome-shell-3.14.3::gentoo'`. * The complete build log is located at '/var/tmp/portage/gnome-base/gnome-shell-3.14.3/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/gnome-base/gnome-shell-3.14.3/temp/environment'. * Working directory: '/var/tmp/portage/gnome-base/gnome-shell-3.14.3/work/gnome-shell-3.14.3' * S: '/var/tmp/portage/gnome-base/gnome-shell-3.14.3/work/gnome-shell-3.14.3' >>> Failed to emerge gnome-base/gnome-shell-3.14.3, Log file: >>> '/var/tmp/portage/gnome-base/gnome-shell-3.14.3/temp/build.log' * Messages for package gnome-base/gnome-shell-3.14.3: * ERROR: gnome-base/gnome-shell-3.14.3::gentoo failed (configure phase): * econf failed * * Call stack: * ebuild.sh, line 93: Called src_configure * environment, line 4730: Called gnome2_src_configure '--enable-browser-plugin' '--enable-man' '--enable-systemd' '--without-bluetooth' '--enable-networkmanager' 'BROWSER_PLUGIN_DIR=/usr/lib64/nsbrowser/plugins' * environment, line 2934: Called econf '--docdir=/usr/share/doc/gnome-shell-3.14.3' '--enable-compile-warnings=minimum' '--disable-schemas-compile' '--disable-maintainer-mode' '--disable-gtk-doc' '--enable-browser-plugin' '--enable-man' '--enable-systemd' '--without-bluetooth' '--enable-networkmanager' 'BROWSER_PLUGIN_DIR=/usr/lib64/nsbrowser/plugins' * phase-helpers.sh, line 584: Called die * The specific snippet of code: * die "econf failed" * * If you need support, post the output of `emerge --info '=gnome-base/gnome-shell-3.14.3::gentoo'`, * the complete build log and the output of `emerge -pqv '=gnome-base/gnome-shell-3.14.3::gentoo'`. * The complete build log is located at '/var/tmp/portage/gnome-base/gnome-shell-3.14.3/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/gnome-base/gnome-shell-3.14.3/temp/environment'. * Working directory: '/var/tmp/portage/gnome-base/gnome-shell-3.14.3/work/gnome-shell-3.14.3' * S: '/var/tmp/portage/gnome-base/gnome-shell-3.14.3/work/gnome-shell-3.14.3'