Complete build log.

galculator-2.1.2.log (text/plain), 25.64 KB, created by Mikhail Kurinnoi on 2013-06-15 21:32:19 UTC

Calculating dependencies  ..... done!

>>> Verifying ebuild manifests

>>> Emerging (1 of 1) sci-calculators/galculator-2.1.2
>>> Downloading 'http://distfiles.gentoo.org/distfiles/galculator-2.1.2.tar.bz2'
--2013-06-16 00:11:21--  http://distfiles.gentoo.org/distfiles/galculator-2.1.2.tar.bz2
Resolving distfiles.gentoo.org... 64.50.236.52, 216.165.129.135, 64.50.233.100, ...
Connecting to distfiles.gentoo.org|64.50.236.52|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 427684 (418K) [application/x-bzip2]
Saving to: ‘/usr/portage/distfiles/galculator-2.1.2.tar.bz2’

     0K .......... .......... .......... .......... .......... 11%  141K 3s
    50K .......... .......... .......... .......... .......... 23%  279K 2s
   100K .......... .......... .......... .......... .......... 35%  287K 1s
   150K .......... .......... .......... .......... .......... 47%  286K 1s
   200K .......... .......... .......... .......... .......... 59% 6.26M 1s
   250K .......... .......... .......... .......... .......... 71%  281K 0s
   300K .......... .......... .......... .......... .......... 83% 11.9M 0s
   350K .......... .......... .......... .......... .......... 95%  309K 0s
   400K .......... .......                                    100% 3.11M=1.2s

2013-06-16 00:11:23 (337 KB/s) - ‘/usr/portage/distfiles/galculator-2.1.2.tar.bz2’ saved [427684/427684]

 * galculator-2.1.2.tar.bz2 SHA256 SHA512 WHIRLPOOL size ;-) ...         [ ok ]
>>> Unpacking source...
>>> Unpacking galculator-2.1.2.tar.bz2 to /var/tmp/portage/sci-calculators/galculator-2.1.2/work
>>> Source unpacked in /var/tmp/portage/sci-calculators/galculator-2.1.2/work
>>> Preparing source in /var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2 ...
 * Fixing OMF Makefiles ...
 [ ok ]
 * Disabling deprecation warnings ...
 [ ok ]
 * Running elibtoolize in: galculator-2.1.2/
 *   Applying install-sh/1.5.4 patch ...
 *   Applying portage/1.2.0 patch ...
 *   Applying sed/1.5.6 patch ...
 *   Applying as-needed/2.4.2 patch ...
 *   Applying target-nm/2.4.2 patch ...
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2 ...
 * econf: updating galculator-2.1.2/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating galculator-2.1.2/config.guess with /usr/share/gnuconfig/config.guess
./configure --prefix=/usr --build=armv7a-hardfloat-linux-gnueabi --host=armv7a-hardfloat-linux-gnueabi --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-dependency-tracking
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for armv7a-hardfloat-linux-gnueabi-gcc... armv7a-hardfloat-linux-gnueabi-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether armv7a-hardfloat-linux-gnueabi-gcc accepts -g... yes
checking for armv7a-hardfloat-linux-gnueabi-gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of armv7a-hardfloat-linux-gnueabi-gcc... none
checking whether NLS is requested... yes
checking for intltool-update... /usr/bin/intltool-update
checking for intltool-merge... /usr/bin/intltool-merge
checking for intltool-extract... /usr/bin/intltool-extract
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/gmsgfmt
checking for perl... /usr/bin/perl
checking for perl >= 5.8.1... 5.12.4
checking for library containing strerror... none required
checking how to run the C preprocessor... armv7a-hardfloat-linux-gnueabi-gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for armv7a-hardfloat-linux-gnueabi-pkg-config... /usr/bin/armv7a-hardfloat-linux-gnueabi-pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for PACKAGE... yes
checking build system type... armv7a-hardfloat-linux-gnueabi
checking host system type... armv7a-hardfloat-linux-gnueabi
checking for cos in -lm... yes
checking for sinhq in -lquadmath... no
checking for flex... flex
checking lex output file root... lex.yy
checking lex library... -lfl
checking whether yytext is a pointer... yes
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for fgrep... /bin/grep -F
checking for ld used by armv7a-hardfloat-linux-gnueabi-gcc... /usr/armv7a-hardfloat-linux-gnueabi/bin/ld
checking if the linker (/usr/armv7a-hardfloat-linux-gnueabi/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/armv7a-hardfloat-linux-gnueabi-nm -B
checking the name lister (/usr/bin/armv7a-hardfloat-linux-gnueabi-nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert armv7a-hardfloat-linux-gnueabi file names to armv7a-hardfloat-linux-gnueabi format... func_convert_file_noop
checking how to convert armv7a-hardfloat-linux-gnueabi file names to toolchain format... func_convert_file_noop
checking for /usr/armv7a-hardfloat-linux-gnueabi/bin/ld option to reload object files... -r
checking for armv7a-hardfloat-linux-gnueabi-objdump... armv7a-hardfloat-linux-gnueabi-objdump
checking how to recognize dependent libraries... pass_all
checking for armv7a-hardfloat-linux-gnueabi-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for armv7a-hardfloat-linux-gnueabi-ar... armv7a-hardfloat-linux-gnueabi-ar
checking for archiver @FILE support... @
checking for armv7a-hardfloat-linux-gnueabi-strip... armv7a-hardfloat-linux-gnueabi-strip
checking for armv7a-hardfloat-linux-gnueabi-ranlib... armv7a-hardfloat-linux-gnueabi-ranlib
checking command to parse /usr/bin/armv7a-hardfloat-linux-gnueabi-nm -B output from armv7a-hardfloat-linux-gnueabi-gcc object... ok
checking for sysroot... no
checking for armv7a-hardfloat-linux-gnueabi-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if armv7a-hardfloat-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no
checking for armv7a-hardfloat-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC
checking if armv7a-hardfloat-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes
checking if armv7a-hardfloat-linux-gnueabi-gcc static flag -static works... yes
checking if armv7a-hardfloat-linux-gnueabi-gcc supports -c -o file.o... yes
checking if armv7a-hardfloat-linux-gnueabi-gcc supports -c -o file.o... (cached) yes
checking whether the armv7a-hardfloat-linux-gnueabi-gcc linker (/usr/armv7a-hardfloat-linux-gnueabi/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for LC_MESSAGES... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking for ngettext in libc... yes
checking for dgettext in libc... yes
checking for bind_textdomain_codeset... yes
checking for msgfmt... (cached) /usr/bin/msgfmt
checking for dcgettext... yes
checking if msgfmt accepts -c... yes
checking for gmsgfmt... (cached) /usr/bin/gmsgfmt
checking for xgettext... (cached) /usr/bin/xgettext
checking for catalogs to be installed...  ru
configure: creating ./config.status
config.status: creating Makefile
config.status: creating galculator.spec
config.status: creating src/Makefile
config.status: creating po/Makefile.in
config.status: creating ui/Makefile
config.status: creating ui/about.ui
config.status: creating doc/Makefile
config.status: creating pixmaps/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default-1 commands
config.status: executing po/stamp-it commands
>>> Source configured.
>>> Compiling source in /var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2 ...
make -j3 
make  all-recursive
make[1]: Entering directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2'
Making all in src
make[2]: Entering directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/src'
armv7a-hardfloat-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I..  -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -DPACKAGE_UI_DIR=\""/usr/share/galculator/ui"\" -DPACKAGE_PIXMAPS_DIR=\""/usr/share/pixmaps"\"     -pthread -I/usr/include/gtk-3.0 -I/usr/include/gio-unix-2.0/ -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng15 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  -O2 -pipe -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard -Wall -c -o galculator-main.o `test -f 'main.c' || echo './'`main.c
armv7a-hardfloat-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I..  -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -DPACKAGE_UI_DIR=\""/usr/share/galculator/ui"\" -DPACKAGE_PIXMAPS_DIR=\""/usr/share/pixmaps"\"     -pthread -I/usr/include/gtk-3.0 -I/usr/include/gio-unix-2.0/ -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng15 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  -O2 -pipe -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard -Wall -c -o galculator-math_functions.o `test -f 'math_functions.c' || echo './'`math_functions.c
armv7a-hardfloat-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I..  -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -DPACKAGE_UI_DIR=\""/usr/share/galculator/ui"\" -DPACKAGE_PIXMAPS_DIR=\""/usr/share/pixmaps"\"     -pthread -I/usr/include/gtk-3.0 -I/usr/include/gio-unix-2.0/ -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng15 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  -O2 -pipe -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard -Wall -c -o galculator-display.o `test -f 'display.c' || echo './'`display.c
armv7a-hardfloat-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I..  -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -DPACKAGE_UI_DIR=\""/usr/share/galculator/ui"\" -DPACKAGE_PIXMAPS_DIR=\""/usr/share/pixmaps"\"     -pthread -I/usr/include/gtk-3.0 -I/usr/include/gio-unix-2.0/ -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng15 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  -O2 -pipe -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard -Wall -c -o galculator-general_functions.o `test -f 'general_functions.c' || echo './'`general_functions.c
armv7a-hardfloat-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I..  -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -DPACKAGE_UI_DIR=\""/usr/share/galculator/ui"\" -DPACKAGE_PIXMAPS_DIR=\""/usr/share/pixmaps"\"     -pthread -I/usr/include/gtk-3.0 -I/usr/include/gio-unix-2.0/ -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng15 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  -O2 -pipe -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard -Wall -c -o galculator-calc_basic.o `test -f 'calc_basic.c' || echo './'`calc_basic.c
armv7a-hardfloat-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I..  -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -DPACKAGE_UI_DIR=\""/usr/share/galculator/ui"\" -DPACKAGE_PIXMAPS_DIR=\""/usr/share/pixmaps"\"     -pthread -I/usr/include/gtk-3.0 -I/usr/include/gio-unix-2.0/ -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng15 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  -O2 -pipe -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard -Wall -c -o galculator-config_file.o `test -f 'config_file.c' || echo './'`config_file.c
armv7a-hardfloat-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I..  -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -DPACKAGE_UI_DIR=\""/usr/share/galculator/ui"\" -DPACKAGE_PIXMAPS_DIR=\""/usr/share/pixmaps"\"     -pthread -I/usr/include/gtk-3.0 -I/usr/include/gio-unix-2.0/ -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng15 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  -O2 -pipe -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard -Wall -c -o galculator-callbacks.o `test -f 'callbacks.c' || echo './'`callbacks.c
armv7a-hardfloat-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I..  -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -DPACKAGE_UI_DIR=\""/usr/share/galculator/ui"\" -DPACKAGE_PIXMAPS_DIR=\""/usr/share/pixmaps"\"     -pthread -I/usr/include/gtk-3.0 -I/usr/include/gio-unix-2.0/ -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng15 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  -O2 -pipe -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard -Wall -c -o galculator-ui.o `test -f 'ui.c' || echo './'`ui.c
armv7a-hardfloat-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I..  -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -DPACKAGE_UI_DIR=\""/usr/share/galculator/ui"\" -DPACKAGE_PIXMAPS_DIR=\""/usr/share/pixmaps"\"     -pthread -I/usr/include/gtk-3.0 -I/usr/include/gio-unix-2.0/ -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng15 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  -O2 -pipe -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard -Wall -c -o galculator-flex_parser.o `test -f 'flex_parser.c' || echo './'`flex_parser.c
flex_parser.c:1551:16: warning: ‘input’ defined but not used [-Wunused-function]
/bin/sh ../libtool --tag=CC   --mode=link armv7a-hardfloat-linux-gnueabi-gcc -pthread -I/usr/include/gtk-3.0 -I/usr/include/gio-unix-2.0/ -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng15 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  -O2 -pipe -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard -Wall -export-dynamic -Wl,-O1 -Wl,--as-needed -o galculator galculator-main.o galculator-math_functions.o galculator-display.o galculator-general_functions.o galculator-calc_basic.o galculator-config_file.o galculator-callbacks.o galculator-ui.o galculator-flex_parser.o -lgtk-3 -lgdk-3 -lpangocairo-1.0 -lpango-1.0 -latk-1.0 -lcairo-gobject -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lgobject-2.0 -lglib-2.0  -lm 
libtool: link: armv7a-hardfloat-linux-gnueabi-gcc -pthread -I/usr/include/gtk-3.0 -I/usr/include/gio-unix-2.0/ -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng15 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -O2 -pipe -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard -Wall -Wl,-O1 -o galculator galculator-main.o galculator-math_functions.o galculator-display.o galculator-general_functions.o galculator-calc_basic.o galculator-config_file.o galculator-callbacks.o galculator-ui.o galculator-flex_parser.o -Wl,--export-dynamic  -Wl,--as-needed -lgtk-3 -lgdk-3 -lpangocairo-1.0 -lpango-1.0 -latk-1.0 -lcairo-gobject -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lm -pthread
make[2]: Leaving directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/src'
Making all in po
make[2]: Entering directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/po'
file=`echo ru | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/gmsgfmt -o $file ru.po
make[2]: Leaving directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/po'
Making all in ui
make[2]: Entering directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/ui'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/ui'
Making all in doc
make[2]: Entering directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/doc'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/doc'
Making all in pixmaps
make[2]: Entering directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/pixmaps'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/pixmaps'
make[2]: Entering directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2'
LC_ALL=C /usr/bin/intltool-merge  -d -u -c ./po/.intltool-merge-cache ./po galculator.desktop.in galculator.desktop
Generating and caching the translation database
Merging translations into galculator.desktop.
make[2]: Leaving directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2'
make[1]: Leaving directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2'
>>> Source compiled.
>>> Test phase [not enabled]: sci-calculators/galculator-2.1.2

>>> Install galculator-2.1.2 into /var/tmp/portage/sci-calculators/galculator-2.1.2/image/ category sci-calculators
make -j3 DESTDIR=/var/tmp/portage/sci-calculators/galculator-2.1.2/image/ 'scrollkeeper_localstate_dir=/var/tmp/portage/sci-calculators/galculator-2.1.2/image//var/lib/scrollkeeper ' install 
Making install in src
make[1]: Entering directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/src'
make[2]: Entering directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/src'
make[2]: Nothing to be done for `install-data-am'.
 /bin/mkdir -p '/var/tmp/portage/sci-calculators/galculator-2.1.2/image//usr/bin'
  /bin/sh ../libtool   --mode=install /usr/bin/install -c galculator '/var/tmp/portage/sci-calculators/galculator-2.1.2/image//usr/bin'
libtool: install: /usr/bin/install -c galculator /var/tmp/portage/sci-calculators/galculator-2.1.2/image//usr/bin/galculator
make[2]: Leaving directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/src'
make[1]: Leaving directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/src'
Making install in po
make[1]: Entering directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/po'
linguas="ru "; \
for lang in $linguas; do \
  dir=/var/tmp/portage/sci-calculators/galculator-2.1.2/image//usr/share/locale/$lang/LC_MESSAGES; \
  /bin/sh /var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/install-sh -d $dir; \
  if test -r $lang.gmo; then \
    /usr/bin/install -c -m 644 $lang.gmo $dir/galculator.mo; \
    echo "installing $lang.gmo as $dir/galculator.mo"; \
  else \
    /usr/bin/install -c -m 644 ./$lang.gmo $dir/galculator.mo; \
    echo "installing ./$lang.gmo as" \
	 "$dir/galculator.mo"; \
  fi; \
  if test -r $lang.gmo.m; then \
    /usr/bin/install -c -m 644 $lang.gmo.m $dir/galculator.mo.m; \
    echo "installing $lang.gmo.m as $dir/galculator.mo.m"; \
  else \
    if test -r ./$lang.gmo.m ; then \
      /usr/bin/install -c -m 644 ./$lang.gmo.m \
	$dir/galculator.mo.m; \
      echo "installing ./$lang.gmo.m as" \
	   "$dir/galculator.mo.m"; \
    else \
      true; \
    fi; \
  fi; \
done
installing ru.gmo as /var/tmp/portage/sci-calculators/galculator-2.1.2/image//usr/share/locale/ru/LC_MESSAGES/galculator.mo
make[1]: Leaving directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/po'
Making install in ui
make[1]: Entering directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/ui'
make[2]: Entering directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/ui'
make[2]: Nothing to be done for `install-exec-am'.
 /bin/mkdir -p '/var/tmp/portage/sci-calculators/galculator-2.1.2/image//usr/share/galculator/ui'
 /usr/bin/install -c -m 644 about.ui prefs_gtk2.ui prefs_gtk3.ui prefs-ume.ui main_frame.ui main_frame_hildon.ui scientific_buttons_gtk2.ui scientific_buttons_gtk3.ui basic_buttons_gtk2.ui basic_buttons_gtk3.ui dispctrl_bottom_gtk2.ui dispctrl_bottom_gtk3.ui dispctrl_right_gtk2.ui dispctrl_right_gtk3.ui dispctrl_right_vertical_gtk2.ui dispctrl_right_vertical_gtk3.ui classic_view.ui paper_view.ui '/var/tmp/portage/sci-calculators/galculator-2.1.2/image//usr/share/galculator/ui'
make[2]: Leaving directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/ui'
make[1]: Leaving directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/ui'
Making install in doc
make[1]: Entering directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/doc'
make[2]: Entering directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/doc'
make[2]: Nothing to be done for `install-exec-am'.
 /bin/mkdir -p '/var/tmp/portage/sci-calculators/galculator-2.1.2/image//usr/share/man/man1'
 /usr/bin/install -c -m 644 galculator.1 '/var/tmp/portage/sci-calculators/galculator-2.1.2/image//usr/share/man/man1'
make[2]: Leaving directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/doc'
make[1]: Leaving directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/doc'
Making install in pixmaps
make[1]: Entering directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/pixmaps'
make[2]: Entering directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/pixmaps'
make[2]: Nothing to be done for `install-exec-am'.
 /bin/mkdir -p '/var/tmp/portage/sci-calculators/galculator-2.1.2/image//usr/share/icons/hicolor/48x48/apps'
 /bin/mkdir -p '/var/tmp/portage/sci-calculators/galculator-2.1.2/image//usr/share/pixmaps'
 /bin/mkdir -p '/var/tmp/portage/sci-calculators/galculator-2.1.2/image//usr/share/icons/hicolor/scalable/apps'
 /usr/bin/install -c -m 644 galculator.xpm '/var/tmp/portage/sci-calculators/galculator-2.1.2/image//usr/share/pixmaps'
 /usr/bin/install -c -m 644 galculator.png '/var/tmp/portage/sci-calculators/galculator-2.1.2/image//usr/share/icons/hicolor/48x48/apps'
 /usr/bin/install -c -m 644 galculator.svg '/var/tmp/portage/sci-calculators/galculator-2.1.2/image//usr/share/icons/hicolor/scalable/apps'
make[2]: Leaving directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/pixmaps'
make[1]: Leaving directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2/pixmaps'
make[1]: Entering directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2'
make[2]: Entering directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2'
make[2]: Nothing to be done for `install-exec-am'.
 /bin/mkdir -p '/var/tmp/portage/sci-calculators/galculator-2.1.2/image//usr/share/applications'
 /usr/bin/install -c -m 644 galculator.desktop '/var/tmp/portage/sci-calculators/galculator-2.1.2/image//usr/share/applications'
make[2]: Leaving directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2'
make[1]: Leaving directory `/var/tmp/portage/sci-calculators/galculator-2.1.2/work/galculator-2.1.2'
>>> Completed installing galculator-2.1.2 into /var/tmp/portage/sci-calculators/galculator-2.1.2/image/

strip: armv7a-hardfloat-linux-gnueabi-strip --strip-unneeded -R .comment -R .GCC.command.line -R .note.gnu.gold-version
   usr/bin/galculator
ecompressdir: bzip2 -9 /usr/share/man
ecompressdir: bzip2 -9 /usr/share/doc

>>> Installing (1 of 1) sci-calculators/galculator-2.1.2
 * Updating desktop mime database ...
 * Updating shared mime info database ...
 * Updating icons cache ...
 [ ok ]

>>> Recording sci-calculators/galculator in "world" favorites file...
>>> Auto-cleaning packages...

>>> No outdated packages were found on your system.

 * GNU info directory index is up-to-date.