leopold ~ # reboot  Broadcast message from root@leopold (ttyS0) (Wed Mar 28 10:06:44 2012): The system is going down for reboot NOW! INIT: INIT: * Caching service dependencies ... [ ok ] * Stopping local [ ok ] * Stopping vixie-cron ... [ ok ] * Saving random seed ... [ ok ] * Deactivating swap devices ... [ ok ] * Stopping S.M.A.R.T. monitoring daemon ... [ ok ] * Use of the opts variable is deprecated and will be * removed in the future. * Please use extra_commands, extra_started_commands or extra_stopped_commands. * Stopping IPv6 Router Advertisement Daemon ... [ ok ] * Disabling IPv6 forwarding ... [ ok ] * Stopping mrouted ... [ ok ] * Stopping fetchmail ... [ ok ] * Stopping postfix (/etc/postfix) ... [ ok ] * Stopping Postgrey ... [ ok ] * Stopping dovecot ... [ ok ] * Stopping ntpd ... [ ok ] * Stopping dhcpd ... [ ok ] * Stopping asterisk PBX ... [ ok ] * Stopping apache2 ... [ ok ] * Use of the opts variable is deprecated and will be * removed in the future. * Please use extra_commands, extra_started_commands or extra_stopped_commands. * Stopping sshd ... [ ok ] * Unmounting network filesystems ... [ ok ] * Stopping NFS statd ... [ ok ] * Stopping rpcbind ... [ ok ] * Stopping named ... [ ok ] * Stopping mysql ... [ ok ] * Bringing down interface eth2 * Running postdown ... * Bringing down interface eth1 * Running postdown ... * 6to4 tunnel brought down * Stopping syslog-ng ... [ ok ] * Bringing down interface eth0 * Running postdown ... * Bringing down interface lo * Running postdown ... * Saving iptables state ... [ ok ] * Stopping firewall ... [ ok ] * Saving ip6tables state ... [ ok ] * Stopping firewall ... [ ok ] * Unmounting loop devices * Unmounting filesystems * Unmounting /backups ... [ ok ] * Unmounting /var ... [ ok ] * Stopping udev ... [ ok ] * Terminating remaining processes ... [ ok ] * Killing remaining processes ... [ ok ] * Saving dependency cache ... [ ok ] * Remounting remaining filesystems read-only ... * Remounting / read only ... [ ok ] [ ok ] sd 0:0:1:0: [sdb] Synchronizing SCSI cache Restarting system. machine restart POST: 012345689bcefghips1234ajklnopqr,,,tvwxy comBIOS ver. 1.32i 20071005 Copyright (C) 2000-2007 Soekris Engineering. net5501 CPU Geode LX 500 Mhz 0000 Mbyte Memory0512 Pri Mas SanDisk SDCFH-8192 LBA Xlt 996-255-63 8003 Mbyte Pri Sla ST980811AS LBA Xlt 1024-255-63 78 Gbyte Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int ------------------------------------------------------------------- 0:01:2 1022 2082 10100000 0006 0220 08 00 00 A0000000 00000000 10 0:06:0 1106 3053 02000096 0117 0210 08 40 00 0000E101 A0004000 11 0:07:0 1106 3053 02000096 0117 0210 08 40 00 0000E201 A0004100 05 0:08:0 1106 3053 02000096 0117 0210 08 40 00 0000E301 A0004200 09 0:09:0 1106 3053 02000096 0117 0210 08 40 00 0000E401 A0004300 12 0:20:0 1022 2090 06010003 0009 02A0 08 40 80 00006001 00006101 0:20:2 1022 209A 01018001 0005 02A0 08 00 00 00000000 00000000 0:21:0 1022 2094 0C031002 0006 0230 08 00 80 A0005000 00000000 15 0:21:1 1022 2095 0C032002 0006 0230 08 00 00 A0006000 00000000 15 Seconds to automatic boot. Press Ctrl-P for entering Monitor. 5 4 3 2 1 GRUB Loading stage1.5. GRUB loading, please wait... GNU GRUB version 0.97 (639K lower / 523264K upper memory) +-------------------------------------------------------------------------+||||||||||||||||||||||||+-------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, 'e' to edit the commands before booting, or 'c' for a command-line. Gentoo Linux i586 Gentoo Linux i586 (Old) The highlighted entry will be booted automatically in 8 seconds. The highlighted entry will be booted automatically in 7 seconds. The highlighted entry will be booted automatically in 6 seconds. The highlighted entry will be booted automatically in 5 seconds. The highlighted entry will be booted automatically in 4 seconds. The highlighted entry will be booted automatically in 3 seconds. The highlighted entry will be booted automatically in 2 seconds. The highlighted entry will be booted automatically in 1 seconds. Booting 'Gentoo Linux i586' root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /boot/vmlinuz root=/dev/sda1 console=ttyS0,19200n8 ignore_loglevel logo. nologo [Linux-bzImage, setup=0x3000, size=0x19f420] Linux version 3.2.1-gentoo-r2 (root@leopold) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) ) #1 Tue Feb 28 20:22:51 CET 2012 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000020000000 (usable) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) debug: ignoring loglevel setting. Notice: NX (Execute Disable) protection missing in CPU! DMI not present or invalid. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x20000 max_arch_pfn = 0x100000 initial memory mapped : 0 - 01800000 Base memory trampoline at [c009c000] 9c000 size 12288 init_memory_mapping: 0000000000000000-0000000020000000 0000000000 - 0000400000 page 4k 0000400000 - 0020000000 page 2M kernel direct mapping tables up to 20000000 @ 17fc000-1800000 ACPI Error: A valid RSDP was not found (20110623/tbxfroot-219) 512MB LOWMEM available. mapped low ram: 0 - 20000000 low ram: 0 - 20000000 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x00020000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x00020000 On node 0 totalpages: 130959 free_area_init_node: node 0, pgdat c12d21c4, node_mem_map dfc00200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 992 pages used for memmap Normal zone: 125984 pages, LIFO batch:31 Allocating PCI resources starting at 20000000 (gap: 20000000:dff00000) pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129935 Kernel command line: root=/dev/sda1 console=ttyS0,19200n8 ignore_loglevel logo.nologo PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Initializing CPU#0 Memory: 515716k/524288k available (2032k kernel code, 8120k reserved, 870k data, 292k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffe4000 - 0xfffff000 ( 108 kB) vmalloc : 0xe0800000 - 0xfffe2000 ( 503 MB) lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) .init : 0xc12d6000 - 0xc131f000 ( 292 kB) .data : 0xc11fc3bd - 0xc12d5d00 ( 870 kB) .text : 0xc1000000 - 0xc11fc3bd (2032 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. NR_IRQS:16 nr_irqs:16 16 CPU 0 irqstacks, hard=df406000 soft=df408000 Console: colour dummy device 80x25 console [ttyS0] enabled Fast TSC calibration using PIT Detected 499.865 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 999.73 BogoMIPS (lpj=1999460) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Geode(TM) Integrated Processor by AMD PCS stepping 02 Performance Events: no PMU driver, software events only. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.01 entry at 0xfac61, last bus=0 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Interpreter disabled. vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) pci 0000:00:01.0: [1022:2080] type 0 class 0x000600 pci 0000:00:01.2: [1022:2082] type 0 class 0x001010 pci 0000:00:01.2: reg 10: [mem 0xa0000000-0xa0003fff] pci 0000:00:06.0: [1106:3053] type 0 class 0x000200 pci 0000:00:06.0: reg 10: [io 0xe100-0xe1ff] pci 0000:00:06.0: reg 14: [mem 0xa0004000-0xa00040ff] pci 0000:00:06.0: supports D1 D2 pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0: [1106:3053] type 0 class 0x000200 pci 0000:00:07.0: reg 10: [io 0xe200-0xe2ff] pci 0000:00:07.0: reg 14: [mem 0xa0004100-0xa00041ff] pci 0000:00:07.0: supports D1 D2 pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:08.0: [1106:3053] type 0 class 0x000200 pci 0000:00:08.0: reg 10: [io 0xe300-0xe3ff] pci 0000:00:08.0: reg 14: [mem 0xa0004200-0xa00042ff] pci 0000:00:08.0: supports D1 D2 pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:08.0: PME# disabled pci 0000:00:09.0: [1106:3053] type 0 class 0x000200 pci 0000:00:09.0: reg 10: [io 0xe400-0xe4ff] pci 0000:00:09.0: reg 14: [mem 0xa0004300-0xa00043ff] pci 0000:00:09.0: supports D1 D2 pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:09.0: PME# disabled pci 0000:00:14.0: [1022:2090] type 0 class 0x000601 pci 0000:00:14.0: reg 10: [io 0x6000-0x7fff] pci 0000:00:14.0: reg 14: [io 0x6100-0x61ff] pci 0000:00:14.0: reg 18: [io 0x6200-0x63ff] pci 0000:00:14.0: CS5536 ISA bridge bug detected (incorrect header); workaround applied. pci 0000:00:14.2: [1022:209a] type 0 class 0x000101 pci 0000:00:14.2: reg 20: [io 0xe000-0xe00f] pci 0000:00:15.0: [1022:2094] type 0 class 0x000c03 pci 0000:00:15.0: reg 10: [mem 0xa0005000-0xa0005fff] pci 0000:00:15.1: [1022:2095] type 0 class 0x000c03 pci 0000:00:15.1: reg 10: [mem 0xa0006000-0xa0006fff] PCI: pci_cache_line_size set to 32 bytes reserve RAM buffer: 000000000009fc00 - 000000000009ffff Switching to clocksource pit pnp: PnP ACPI: disabled PCI: max bus depth: 0 pci_try_num: 1 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 32 bytes, default 32 platform rtc_cmos: registered platform RTC device (no PNP device found) msgmni has been set to 1007 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Real Time Clock Driver v1.12b AMD Geode RNG detected Switching to clocksource tsc floppy0: no floppy controllers found pata_cs5536 0000:00:14.2: setting latency timer to 64 scsi0 : pata_cs5536 scsi1 : pata_cs5536 ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14 ata2: DUMMY via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker via-rhine 0000:00:06.0: eth0: VIA Rhine III (Management Adapter) at 0x1e100, 00:00:24:c8:db:2c, IRQ 11 via-rhine 0000:00:06.0: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link cde1 via-rhine 0000:00:07.0: eth1: VIA Rhine III (Management Adapter) at 0x1e200, 00:00:24:c8:db:2d, IRQ 5 via-rhine 0000:00:07.0: eth1: MII PHY found at address 1, status 0x786d advertising 05e1 Link c5e1 via-rhine 0000:00:08.0: eth2: VIA Rhine III (Management Adapter) at 0x1e300, 00:00:24:c8:db:2e, IRQ 9 via-rhine 0000:00:08.0: eth2: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1 via-rhine 0000:00:09.0: eth3: VIA Rhine III (Management Adapter) at 0x1e400, 00:00:24:c8:db:2f, IRQ 12 via-rhine 0000:00:09.0: eth3: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000 i8042: PNP: No PS/2 controller found. Probing ports directly. ata1.00: CFA: SanDisk SDCFH-8192, HDX 4.04, max MWDMA2 ata1.00: 16007040 sectors, multi 0: LBA ata1.01: HPA detected: current 156299375, native 156301488 ata1.01: ATA-7: ST980811AS, 3.ALC, max UDMA/133 ata1.01: 156299375 sectors, multi 0: LBA48 NCQ (depth 0/32) ata1.01: limited to UDMA/33 due to 40-wire cable ata1.00: configured for MWDMA2 ata1.01: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA SanDisk SDCFH-81 HDX PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 16007040 512-byte logical blocks: (8.19 GB/7.63 GiB) scsi 0:0:1:0: Direct-Access ATA ST980811AS 3.AL PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:1:0: [sdb] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:1:0: [sdb] Write Protect is off sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 serio: i8042 KBD port at 0x60,0x64 irq 1 mousedev: PS/2 mouse device common for all mice cpuidle: using governor ladder TCP cubic registered NET: Registered protocol family 17 sdb: sdb1 sdb2 < sdb5 sdb6 > sd 0:0:0:0: [sda] Attached SCSI removable disk sd 0:0:1:0: [sdb] Attached SCSI disk kjournald starting. Commit interval 5 seconds EXT3-fs (sda1): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) readonly on device 8:1. Freeing unused kernel memory: 292k freed INIT: version 2.88 booting NET: Registered protocol family 1 G OpenRC 0.9.8.4 is starting up Gentoo Linux (i586) * Mounting /proc ... [ ok ] * Mounting /sys ... [ ok ] * Mounting /dev ... [ ok ] * Starting udev ... [ ok ]udevd[922]: starting version 171 * Populating /dev with existing devices through uevents ... geode-aes: GEODE AES engine enabled. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub [ ok ] * Waiting for uevents to be processed ... usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ehci_hcd 0000:00:15.1: setting latency timer to 64 ehci_hcd 0000:00:15.1: EHCI Host Controller ehci_hcd 0000:00:15.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:15.1: irq 15, io mem 0xa0006000 ehci_hcd 0000:00:15.1: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ohci_hcd 0000:00:15.0: setting latency timer to 64 ohci_hcd 0000:00:15.0: OHCI Host Controller ohci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:15.0: irq 15, io mem 0xa0005000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected [ ok ] * Mounting /dev/pts ... [ ok ] * Mounting /dev/shm ... [ ok * Setting system clock using the hardware clock [UTC] ... [ ok ] * Loading module ipv6 ... NET: Registered protocol family 10 [ ok ] * Loading module sit ... IPv6 over IPv4 tunneling driver [ ok ] * Autoloaded 2 module(s) * Checking local filesystems ... /dev/sda1: clean, 269178/1001920 files, 1114973/2000084 blocks (check in 4 mounts) /dev/sdb5: clean, 41583/611648 files, 179046/1222940 blocks /dev/sdb6: clean, 57072/9043968 files, 5020053/18067092 blocks [ ok ] * Remounting root filesystem read/write ... EXT3-fs (sda1): using internal journal [ ok ] * Updating /etc/mtab ... [ ok ] * Mounting local filesystems ... kjournald starting. Commit interval 5 seconds EXT3-fs (sdb5): using internal journal EXT3-fs (sdb5): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (sdb6): using internal journal EXT3-fs (sdb6): mounted filesystem with writeback data mode [ ok ] * Configuring kernel parameters ... [ ok ] * Creating user login records ... [ ok ] * Cleaning /var/run ... [ ok ] * Wiping /tmp directory ... [ ok ] * Setting terminal encoding [UTF-8] ... [ ok ] * Setting console font [default8x16] ... [ ok ] * Setting hostname to leopold ... [ ok ] * Setting keyboard mode [UTF-8] ... [ ok ] * Loading key mappings [us] ... [ ok ] * Bringing up interface lo * 127.0.0.1/8 ... [ ok ] * Adding routes * 127.0.0.0/8 via 127.0.0.1 ... [ ok ] * Running postup ... * Mounting USB device filesystem [usbfs] ... [ ok ] * Activating swap devices ... Adding 987960k swap on /dev/sdb1. Priority:-1 extents:1 across:987960k [ ok ] * Initializing random number generator ... [ ok ] INIT: Entering runlevel: 3 * ERROR: cannot start syslog-ng as net.eth0 would not start * Loading ip6tables state and starting firewall ... WARNING: Deprecated config file ip6_tables: (C) 2000-2006 Netfilter Core Team /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. nf_conntrack version 0.5.0 (8062 buckets, 32248 max) [ ok ] * Loading iptables state and starting firewall ip_tables: (C) 2000-2006 Netfilter Core Team ... WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. [ ok ] * Bringing up interface eth0 via-rhine 0000:00:06.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 * 192.168.19.6 ... [ ok ] * 2001:470:91c2:19::6/64 ... [ ok ] * fe80::19/64 ... [ ok ] * Waiting for IPv6 addresses ... [ ok ] * Running postup ... * Bringing up interface eth1 via-rhine 0000:00:07.0: eth1: link up, 100Mbps, full-duplex, lpa 0xC5E1 * dhcp ... * Running udhcpc ... eth0: no IPv6 routers present eth0: no IPv6 routers present * start-stop-daemon: failed to start `/bin/busybox' [ !! ] [ !! ] * Trying fallback configuration 86.48.99.37/24 broadcast 86.48.99.255 * 86.48.99.37/24 ... [ ok ] * Adding routes * default via 86.48.99.1 ... [ ok ] * Running postup ... * 6to4 tunnel set up * Bringing up interface eth2 eth1: no IPv6 routers present via-rhine 0000:00:08.0: eth2: link up, 100Mbps, full-duplex, lpa 0x45E1 * 192.168.20.6 ... [ ok ] * 2001:470:91c2:20::6/64 ... [ ok ] * fe80::20/64 ... [ ok ] * Adding routes * 2001:470:91c2:20::/64 ... [ ok ] * Waiting for IPv6 addresses ... [ ok ] * Running postup ... * Starting mysql ... [ ok ] * Starting named ... * Checking named configuration ... [ ok ] [ ok ] * Setting clock via the NTP client 'ntpdate' ... eth2: no IPv6 routers present eth2: no IPv6 routers present [ ok ] * Starting rpcbind ... [ ok ] * Starting NFS statd ... [ ok ] * Mounting network filesystems ... [ ok ] * Use of the opts variable is deprecated and will be * removed in the future. * Please use extra_commands, extra_started_commands or extra_stopped_commands. * Starting sshd ... [ ok ] * Starting apache2 ... [ ok ] * Starting asterisk PBX (as asterisk:asterisk) ... [ ok ] * Starting dhcpd ... [ ok ] * Starting ntpd ... [ ok ] * Starting dovecot ... [ ok ] * Starting Postgrey ... [ ok ] * Starting postfix (/etc/postfix) ... [ ok ] * Starting fetchmail ... [ ok ] * Starting mrouted ... * WARNING: -a/--startas is deprecated and will be removed in the future, please use -x/--exec or -n/--name instead [ ok ] * Use of the opts variable is deprecated and will be * removed in the future. * Please use extra_commands, extra_started_commands or extra_stopped_commands. * Enabling IPv6 forwarding ... [ ok ] * Starting IPv6 Router Advertisement Daemon ... [ ok ] * Starting S.M.A.R.T. monitoring daemon ... [ ok ] * Doing udev cleanups * Starting vixie-cron ... [ ok ] * Starting local [ ok ] This is leopold.oz6bl.dk (Linux i586 3.2.1-gentoo-r2) 10:09:00 leopold login: