declare -x ABI="amd64" declare -x ALSA_CARDS="" declare -x ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" declare -x APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" declare -x ARCH="amd64" declare -x BOOTSTRAP_USE="cxx unicode multilib" declare -x CALLIGRA_FEATURES="kexi words flow plan stage tables krita karbon braindump" declare -x CAMERAS="ptp2" declare -x CASROOT="/usr/lib64/opencascade-6.3/ros/lin" declare -x CBUILD="x86_64-pc-linux-gnu" declare -x CFLAGS="-march=k8 -O2 -pipe" declare -x CFLAGS_amd64="-m64" declare -x CFLAGS_default declare -x CFLAGS_x32="-mx32" declare -x CFLAGS_x86="-m32" declare -x CHOST="x86_64-pc-linux-gnu" declare -x CHOST_amd64="x86_64-pc-linux-gnu" declare -x CHOST_default="x86_64-pc-linux-gnu" declare -x CHOST_x32="x86_64-pc-linux-gnu" declare -x CHOST_x86="i686-pc-linux-gnu" declare -x COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" declare -x CONF_PREFIX="/usr" declare -x CROSSCOMPILE_OPTS="" declare -x CSF_EXCEPTION_PROMPT="1" declare -x CSF_GraphicShr="/usr/lib64/opencascade-6.3/ros/lin/lib64/libTKOpenGl.so" declare -x CSF_IGESDefaults="/usr/lib64/opencascade-6.3/ros/lin/src/XSTEPResource" declare -x CSF_LANGUAGE="us" declare -x CSF_MDTVFontDirectory="/usr/lib64/opencascade-6.3/ros/lin/src/FontMFT" declare -x CSF_MDTVTexturesDirectory="/usr/lib64/opencascade-6.3/ros/lin/src/Textures" declare -x CSF_MIGRATION_TYPES="/usr/lib64/opencascade-6.5/ros/lin/src/StdResource/MigrationSheet.txt" declare -x CSF_PluginDefaults="/usr/lib64/opencascade-6.3/ros/lin/src/StdResource" declare -x CSF_SHMessage="/usr/lib64/opencascade-6.3/ros/lin/src/SHMessage" declare -x CSF_STEPDefaults="/usr/lib64/opencascade-6.3/ros/lin/src/XSTEPResource" declare -x CSF_StandardDefaults="/usr/lib64/opencascade-6.3/ros/lin/src/StdResource" declare -x CSF_StandardLiteDefaults="/usr/lib64/opencascade-6.3/ros/lin/src/StdResource" declare -x CSF_UnitsDefinition="/usr/lib64/opencascade-6.3/ros/lin/src/UnitsAPI/Units.dat" declare -x CSF_UnitsLexicon="/usr/lib64/opencascade-6.3/ros/lin/src/UnitsAPI/Lexi_Expr.dat" declare -x CSF_XCAFDefaults="/usr/lib64/opencascade-6.3/ros/lin/src/StdResource" declare -x CSF_XSMessage="/usr/lib64/opencascade-6.3/ros/lin/src/XSMessage" declare -x CSF_XmlOcafResource="/usr/lib64/opencascade-6.3/ros/lin/src/XmlOcafResource" declare -x CTARGET_default="x86_64-pc-linux-gnu" declare -x CXXFLAGS="-march=k8 -O2 -pipe" declare -x DBUS_SESSION_BUS_ADDRESS="unix:abstract=/tmp/dbus-e6cjlVTvnK,guid=1c3b19ba861e117baa18ba7c0000003c" declare -x DEFAULT_ABI="amd64" declare -x DEFINED_PHASES=" install prepare test" declare DEPEND=" dev-lang/tk >=dev-tcltk/tcllib-1.11 media-libs/tiff:0 media-libs/libpng:0 sys-libs/zlib virtual/jpeg test? ( x11-apps/xhost media-fonts/font-misc-misc media-fonts/font-cursor-misc ) test? ( !prefix? ( x11-base/xorg-server[xvfb] ) x11-apps/xhost )" declare DESCRIPTION="Adds a lot of image formats to Tcl/Tk" declare -x DESKTOP_SESSION="default" declare -x DESTTREE="/usr" declare -x DIROPTIONS="-m0755" declare -x EAPI="3" declare -- ECONF_SOURCE="." declare -x ELIBC="glibc" declare -- EPATCH_EXCLUDE="" declare -- EPATCH_FORCE="no" declare -- EPATCH_MULTI_MSG="Applying various patches (bugfixes/updates) ..." declare -- EPATCH_OPTS="-g0 -E --no-backup-if-mismatch" declare -- EPATCH_SINGLE_MSG="" declare -- EPATCH_SOURCE="/var/tmp/portage/dev-tcltk/tkimg-1.4-r4/work/patch" declare -- EPATCH_SUFFIX="patch.bz2" declare -x EXEOPTIONS="-m0755" declare -x FCFLAGS="" declare -x FETCHCOMMAND_SSH="bash -c \"x=\\\${2#ssh://} ; host=\\\${x%%/*} ; port=\\\${host##*:} ; host=\\\${host%:*} ; [[ \\\${host} = \\\${port} ]] && port=22 ; exec rsync --rsh=\\\"ssh -p\\\${port}\\\" -avP \\\"\\\${host}:/\\\${x#*/}\\\" \\\"\\\$1\\\"\" rsync \"\${DISTDIR}/\${FILE}\" \"\${URI}\"" declare -x FFLAGS="" declare -x GCC_SPECS="" declare -x GDK_USE_XFT="1" declare -x GDMSESSION="default" declare -x GDM_XSERVER_LOCATION="local" declare -x GLADE_CATALOG_PATH=":" declare -x GLADE_MODULE_PATH=":" declare -x GLADE_PIXMAP_PATH=":" declare -x GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" declare -x GRUB_PLATFORMS="" declare -x GSETTINGS_BACKEND="dconf" declare -x GUILE_LOAD_PATH="/usr/share/guile/1.8" declare HOMEPAGE="http://tkimg.sourceforge.net/" declare -x INHERITED=" multilib toolchain-funcs portability user eutils prefix virtualx" declare -x INPUT_DEVICES="evdev" declare -x INSDESTTREE="" declare -x INSOPTIONS="-m0644" declare -x ITCL_LIBRARY="/usr/lib64/itcl3.4" declare -x ITK_LIBRARY="/usr/lib64/itk3.4" declare IUSE="doc test test" declare -x JAVAC="/etc/java-config-2/current-system-vm/bin/javac" declare -x JAVA_HOME="/etc/java-config-2/current-system-vm" declare -x JDK_HOME="/etc/java-config-2/current-system-vm" declare -x KERNEL="linux" declare -x KERNEL_ABI="amd64" declare -x KEYWORDS="~alpha amd64 ppc ~sparc x86 ~amd64-linux ~x86-linux" declare -x KV="3.2.1-gentoo-r2" declare -x LANG="C" declare -x LCD_DEVICES="" declare -x LDFLAGS="-Wl,-O1 -Wl,--as-needed" declare -x LDFLAGS_amd64="-m elf_x86_64" declare -x LDFLAGS_default declare -x LDFLAGS_x32="-m elf32_x86_64" declare -x LDFLAGS_x86="-m elf_i386" declare -x LIBDIR_amd64="lib64" declare -x LIBDIR_amd64_fbsd="lib64" declare -x LIBDIR_default="lib" declare -x LIBDIR_n32="lib32" declare -x LIBDIR_n64="lib64" declare -x LIBDIR_o32="lib" declare -x LIBDIR_ppc="lib32" declare -x LIBDIR_ppc64="lib64" declare -x LIBDIR_s390="lib32" declare -x LIBDIR_s390x="lib64" declare -x LIBDIR_sparc32="lib32" declare -x LIBDIR_sparc64="lib64" declare -x LIBDIR_x32="libx32" declare -x LIBDIR_x86="lib32" declare -x LIBDIR_x86_fbsd="lib32" declare -x LIBGLADE_MODULE_PATH=":/usr/lib64/libglade/2.0" declare -x LIBOPTIONS="-m0644" declare -x LICENSE="BSD" declare -x LINGUAS="en" declare -x MAKEOPTS="-j5" declare -x MMGT_CLEAR="1" declare -x MULTILIB_ABIS="amd64 x86" declare -x MULTILIB_STRICT_DENY="64-bit.*shared object" declare -x MULTILIB_STRICT_DIRS="/lib32 /lib /usr/lib32 /usr/lib /usr/kde/*/lib32 /usr/kde/*/lib /usr/qt/*/lib32 /usr/qt/*/lib /usr/X11R6/lib32 /usr/X11R6/lib" declare -x MULTILIB_STRICT_EXEMPT="(perl5|gcc|gcc-lib|binutils|eclipse-3|debug|portage|udev)" declare -- MYP="tkimg1.4" declare -x NETBEANS="apisupport cnd groovy gsf harness ide identity j2ee java mobility nb php profiler soa visualweb webcommon websvccommon xml" declare -x OPENGL_PROFILE="nvidia" declare -x PATH="/usr/lib64/portage/bin/ebuild-helpers:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.3:/usr/qt/3/bin:/usr/lib64/subversion/bin" declare PDEPEND="" declare -x PHP_TARGETS="" declare -x PKG_CONFIG_PATH="/usr/lib64/pkgconfig" declare -a PORTAGE_DOCOMPRESS='([0]="/usr/share/doc" [1]="/usr/share/info" [2]="/usr/share/man")' declare -a PORTAGE_DOCOMPRESS_SKIP='([0]="/usr/share/doc/tkimg-1.4-r4/html")' declare -x PORTAGE_NICENESS="19" declare -x PRELINK_PATH_MASK="/usr/lib64/libfreebl3.so:/usr/lib64/libnssdbm3.so:/usr/lib64/libsoftokn3.so" declare -x PROFILE_ONLY_VARIABLES="ARCH ELIBC KERNEL USERLAND" declare -x PROPERTIES="" declare -x PROVIDE="" declare -x PYTHONDONTWRITEBYTECODE="1" declare -x QMAKESPEC="linux-g++" declare -x QTDIR="/usr/qt/3" declare -x QT_PLUGIN_PATH="/usr/lib64/kde4/plugins" declare -x RDEPEND=" dev-lang/tk >=dev-tcltk/tcllib-1.11 media-libs/tiff:0 media-libs/libpng:0 sys-libs/zlib virtual/jpeg " declare REQUIRED_USE="" declare -x RESTRICT="test" declare -x RESUMECOMMAND_SSH="bash -c \"x=\\\${2#ssh://} ; host=\\\${x%%/*} ; port=\\\${host##*:} ; host=\\\${host%:*} ; [[ \\\${host} = \\\${port} ]] && port=22 ; exec rsync --rsh=\\\"ssh -p\\\${port}\\\" -avP \\\"\\\${host}:/\\\${x#*/}\\\" \\\"\\\$1\\\"\" rsync \"\${DISTDIR}/\${FILE}\" \"\${URI}\"" declare -x RUBYOPT="-rauto_gem" declare -x RUBY_TARGETS="ruby18" declare -x S="/var/tmp/portage/dev-tcltk/tkimg-1.4-r4/work/tkimg1.4" declare -x SANDBOX_DEBUG="0" declare -x SANDBOX_DENY="" declare -x SANDBOX_PID="21275" declare -x SANDBOX_PREDICT="/var/tmp/portage/dev-tcltk/tkimg-1.4-r4/homedir:/dev/crypto:/var/cache/fontconfig" declare -x SANDBOX_READ="/:/var/tmp" declare -x SANDBOX_VERBOSE="1" declare -x SANDBOX_WRITE=":/dev/console:/dev/fd:/dev/full:/dev/null:/dev/pts/:/dev/pty:/dev/shm:/dev/tts:/dev/tty:/dev/vc/:/dev/zero:/proc/self/fd:/tmp/:/usr/lib/cf:/usr/lib/conftest:/usr/lib32/cf:/usr/lib32/conftest:/usr/lib64/cf:/usr/lib64/conftest:/usr/tmp/cf:/usr/tmp/conftest:/var/tmp:/var/tmp/:/var/tmp/portage/dev-tcltk/tkimg-1.4-r4/homedir/.bash_history" declare -x SCHEME_LIBRARY_PATH="/usr/share/slib/" declare -x SESSION_MANAGER="local/cooler:@/tmp/.ICE-unix/3856,unix/cooler:/tmp/.ICE-unix/3856" declare -x SLOT="0" declare SRC_URI=" http://dev.gentoo.org/~jlec/distfiles/tkimg-1.4-gentoo+bundled-tiff.patch.xz mirror://sourceforge/tkimg/1.4/tkimg1.4.tar.bz2" declare -x SYMLINK_LIB="yes" declare -x TCLHOME="/usr/bin" declare -x TCLLIBPATH="/usr/lib64" declare -x TCL_LIBRARY="/usr/lib64/tcl8.5" declare -x TIX_LIBRARY="/usr/lib64/tix8.4" declare -x TK_LIBRARY="/usr/lib64/tk8.5" declare -x USE="amd64 elibc_glibc kernel_linux multilib userland_GNU" declare -x USERLAND="GNU" declare -x USERNAME="jan" declare -x VIDEO_CARDS="" declare -- VIRTUALX_COMMAND="emake" declare -- VIRTUALX_DEPEND=" !prefix? ( x11-base/xorg-server[xvfb] ) x11-apps/xhost " declare -- VIRTUALX_REQUIRED="test" declare -- VIRTUALX_USE="test" declare -x WINDOWID="48245806" declare -x WINDOWPATH="7" declare -x XDG_CONFIG_DIRS="/etc/xdg:/etc/xdg" declare -x XDG_DATA_DIRS="/usr/local/share:/usr/share:/usr/share/gdm:/usr/share" declare -x XDG_MENU_PREFIX="xfce-" declare -x XDG_SESSION_COOKIE="a593f25fa76d68b20aae21030000000c-1329610672.706761-719333093" declare -x XERCESC_NLS_HOME="/usr/share/xerces-c/msg" declare -x XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account" declare -x _E_DOCDESTTREE_="" declare -x _E_EXEDESTTREE_="" declare -- ___ECLASS_ONCE_EUTILS="recur -_+^+_- spank" declare -- ___ECLASS_ONCE_MULTILIB="recur -_+^+_- spank" declare -- ___ECLASS_ONCE_PORTABILITY="recur -_+^+_- spank" declare -- ___ECLASS_ONCE_TOOLCHAIN_FUNCS="recur -_+^+_- spank" declare -- ___ECLASS_ONCE_USER="recur -_+^+_- spank" declare -- phase_func Xeconf () { debug-print-function ${FUNCNAME} "$@"; VIRTUALX_COMMAND="econf" virtualmake "$@" } Xemake () { debug-print-function ${FUNCNAME} "$@"; VIRTUALX_COMMAND="emake" virtualmake "$@" } Xmake () { debug-print-function ${FUNCNAME} "$@"; ewarn "QA: you should not execute make directly"; ewarn "QA: rather execute Xemake -j1 if you have issues with parallel make"; VIRTUALX_COMMAND="emake -j1" virtualmake "$@" } _assert_pkg_ebuild_phase () { case ${EBUILD_PHASE} in setup | preinst | postinst) ;; *) eerror "'$1()' called from '${EBUILD_PHASE}' phase which is not OK:"; eerror "You may only call from pkg_{setup,preinst,postinst} functions."; eerror "Package fails at QA and at life. Please file a bug."; die "Bad package! $1 is only for use in some pkg_* functions!" ;; esac } _cdrom_locate_file_on_cd () { local mline=""; local showedmsg=0 showjolietmsg=0; while [[ -z ${CDROM_ROOT} ]]; do local i=0; local -a cdset=(${*//:/ }); if [[ -n ${CDROM_SET} ]]; then cdset=(${cdset[${CDROM_SET}]}); fi; while [[ -n ${cdset[${i}]} ]]; do local dir=$(dirname ${cdset[${i}]}); local file=$(basename ${cdset[${i}]}); local point= node= fs= foo=; while read point node fs foo; do [[ " cd9660 iso9660 udf " != *" ${fs} "* ]] && ! [[ ${fs} == "subfs" && ",${opts}," == *",fs=cdfss,"* ]] && continue; point=${point//\040/ }; [[ ! -d ${point}/${dir} ]] && continue; [[ -z $(find "${point}/${dir}" -maxdepth 1 -iname "${file}") ]] && continue; export CDROM_ROOT=${point}; export CDROM_SET=${i}; export CDROM_MATCH=${cdset[${i}]}; return; done <<< "$(get_mounts)"; ((++i)); done; echo; if [[ ${showedmsg} -eq 0 ]]; then if [[ ${CDROM_TOTAL_CDS} -eq 1 ]]; then if [[ -z ${CDROM_NAME} ]]; then einfo "Please insert+mount the cdrom for ${PN} now !"; else einfo "Please insert+mount the ${CDROM_NAME} cdrom now !"; fi; else if [[ -z ${CDROM_NAME_1} ]]; then einfo "Please insert+mount cd #${CDROM_CURRENT_CD} for ${PN} now !"; else local var="CDROM_NAME_${CDROM_CURRENT_CD}"; einfo "Please insert+mount the ${!var} cdrom now !"; fi; fi; showedmsg=1; fi; einfo "Press return to scan for the cd again"; einfo "or hit CTRL+C to abort the emerge."; echo; if [[ ${showjolietmsg} -eq 0 ]]; then showjolietmsg=1; else ewarn "If you are having trouble with the detection"; ewarn "of your CD, it is possible that you do not have"; ewarn "Joliet support enabled in your kernel. Please"; ewarn "check that CONFIG_JOLIET is enabled in your kernel."; ebeep 5; fi; read || die "something is screwed with your system"; done } _dead_portability_user_funcs () { die "if you really need this, please file a bug for base-system@gentoo.org" } _epatch_draw_line () { [[ -z $1 ]] && set "$(printf "%65s" '')"; echo "${1//?/=}" } _gcc-install-dir () { echo "$(LC_ALL=C $(tc-getCC) -print-search-dirs 2> /dev/null | awk '$1=="install:" {print $2}')" } _gcc-specs-directive_raw () { local cc=$(tc-getCC); local specfiles=$(LC_ALL=C ${cc} -v 2>&1 | awk '$1=="Reading" {print $NF}'); ${cc} -dumpspecs 2> /dev/null | cat - ${specfiles} | awk -v directive=$1 'BEGIN { pspec=""; spec=""; outside=1 } $1=="*"directive":" { pspec=spec; spec=""; outside=0; next } outside || NF==0 || ( substr($1,1,1)=="*" && substr($1,length($1),1)==":" ) { outside=1; next } spec=="" && substr($0,1,1)=="+" { spec=pspec " " substr($0,2); next } { spec=spec $0 } END { print spec }'; return 0 } _gcc-specs-exists () { [[ -f $(_gcc-install-dir)/$1 ]] } _gcc_fullversion () { local ver="$1"; shift; set -- `$(tc-getCPP "$@") -E -P - <<<"__GNUC__ __GNUC_MINOR__ __GNUC_PATCHLEVEL__"`; eval echo "$ver" } _tc-getPROG () { local tuple=$1; local v var vars=$2; local prog=$3; var=${vars%% *}; for v in ${vars}; do if [[ -n ${!v} ]]; then export ${var}="${!v}"; echo "${!v}"; return 0; fi; done; local search=; [[ -n $4 ]] && search=$(type -p "$4-${prog}"); [[ -z ${search} && -n ${!tuple} ]] && search=$(type -p "${!tuple}-${prog}"); [[ -n ${search} ]] && prog=${search##*/}; export ${var}=${prog}; echo "${!var}" } built_with_use () { local hidden="no"; if [[ $1 == "--hidden" ]]; then hidden="yes"; shift; fi; local missing_action="die"; if [[ $1 == "--missing" ]]; then missing_action=$2; shift; shift; case ${missing_action} in true | false | die) ;; *) die "unknown action '${missing_action}'" ;; esac; fi; local opt=$1; [[ ${opt:0:1} = "-" ]] && shift || opt="-a"; local PKG=$(best_version $1); [[ -z ${PKG} ]] && die "Unable to resolve $1 to an installed package"; shift; local USEFILE=${ROOT}/var/db/pkg/${PKG}/USE; local IUSEFILE=${ROOT}/var/db/pkg/${PKG}/IUSE; if [[ ! -e ${USEFILE} ]] || [[ ! -e ${IUSEFILE} && ${hidden} == "no" ]]; then case ${missing_action} in true) return 0 ;; false) return 1 ;; die) die "Unable to determine what USE flags $PKG was built with" ;; esac; fi; if [[ ${hidden} == "no" ]]; then local IUSE_BUILT=($(<"${IUSEFILE}")); local expand; for expand in $(echo ${USE_EXPAND} | tr '[:upper:]' '[:lower:]'); do if [[ $1 == ${expand}_* ]]; then expand=""; break; fi; done; if [[ -n ${expand} ]]; then if ! has $1 ${IUSE_BUILT[@]#[-+]}; then case ${missing_action} in true) return 0 ;; false) return 1 ;; die) die "$PKG does not actually support the $1 USE flag!" ;; esac; fi; fi; fi; local USE_BUILT=$(<${USEFILE}); while [[ $# -gt 0 ]]; do if [[ ${opt} = "-o" ]]; then has $1 ${USE_BUILT} && return 0; else has $1 ${USE_BUILT} || return 1; fi; shift; done; [[ ${opt} = "-a" ]] } cdrom_get_cds () { local cdcnt=0; local f=; for f in "$@"; do ((++cdcnt)); export CDROM_CHECK_${cdcnt}="$f"; done; export CDROM_TOTAL_CDS=${cdcnt}; export CDROM_CURRENT_CD=1; if [[ -n ${CD_ROOT}${CD_ROOT_1} ]]; then local var=; cdcnt=0; while [[ ${cdcnt} -lt ${CDROM_TOTAL_CDS} ]]; do ((++cdcnt)); var="CD_ROOT_${cdcnt}"; [[ -z ${!var} ]] && var="CD_ROOT"; if [[ -z ${!var} ]]; then eerror "You must either use just the CD_ROOT"; eerror "or specify ALL the CD_ROOT_X variables."; eerror "In this case, you will need ${CDROM_TOTAL_CDS} CD_ROOT_X variables."; die "could not locate CD_ROOT_${cdcnt}"; fi; done; export CDROM_ROOT=${CD_ROOT_1:-${CD_ROOT}}; einfo "Found CD #${CDROM_CURRENT_CD} root at ${CDROM_ROOT}"; export CDROM_SET=-1; for f in ${CDROM_CHECK_1//:/ }; do ((++CDROM_SET)); [[ -e ${CDROM_ROOT}/${f} ]] && break; done; export CDROM_MATCH=${f}; return; fi; if [[ ${CDROM_TOTAL_CDS} -eq 1 ]]; then einfo "This ebuild will need the ${CDROM_NAME:-cdrom for ${PN}}"; echo; einfo "If you do not have the CD, but have the data files"; einfo "mounted somewhere on your filesystem, just export"; einfo "the variable CD_ROOT so that it points to the"; einfo "directory containing the files."; echo; einfo "For example:"; einfo "export CD_ROOT=/mnt/cdrom"; echo; else if [[ -n ${CDROM_NAME_SET} ]]; then cdcnt=0; while [[ ${cdcnt} -lt ${CDROM_TOTAL_CDS} ]]; do ((++cdcnt)); export CDROM_NAME_${cdcnt}="${CDROM_NAME_SET[$((${cdcnt}-1))]}"; done; fi; einfo "This package will need access to ${CDROM_TOTAL_CDS} cds."; cdcnt=0; while [[ ${cdcnt} -lt ${CDROM_TOTAL_CDS} ]]; do ((++cdcnt)); var="CDROM_NAME_${cdcnt}"; [[ ! -z ${!var} ]] && einfo " CD ${cdcnt}: ${!var}"; done; echo; einfo "If you do not have the CDs, but have the data files"; einfo "mounted somewhere on your filesystem, just export"; einfo "the following variables so they point to the right place:"; einfon ""; cdcnt=0; while [[ ${cdcnt} -lt ${CDROM_TOTAL_CDS} ]]; do ((++cdcnt)); echo -n " CD_ROOT_${cdcnt}"; done; echo; einfo "Or, if you have all the files in the same place, or"; einfo "you only have one cdrom, you can export CD_ROOT"; einfo "and that place will be used as the same data source"; einfo "for all the CDs."; echo; einfo "For example:"; einfo "export CD_ROOT_1=/mnt/cdrom"; echo; fi; export CDROM_SET=""; export CDROM_CURRENT_CD=0; cdrom_load_next_cd } cdrom_load_next_cd () { local var; ((++CDROM_CURRENT_CD)); unset CDROM_ROOT; var=CD_ROOT_${CDROM_CURRENT_CD}; [[ -z ${!var} ]] && var="CD_ROOT"; if [[ -z ${!var} ]]; then var="CDROM_CHECK_${CDROM_CURRENT_CD}"; _cdrom_locate_file_on_cd ${!var}; else export CDROM_ROOT=${!var}; fi; einfo "Found CD #${CDROM_CURRENT_CD} root at ${CDROM_ROOT}" } check_license () { die "you no longer need this as portage supports ACCEPT_LICENSE itself" } dlopen_lib () { case "${CHOST}" in *-linux-gnu* | *-linux-uclibc | *-interix*) echo "-ldl" ;; esac } doicon () { ( local i j ret; insinto /usr/share/pixmaps; for i in "$@"; do if [[ -f ${i} ]]; then doins "${i}"; ((ret+=$?)); else if [[ -d ${i} ]]; then for j in "${i}"/*.png; do doins "${j}"; ((ret+=$?)); done; else ((++ret)); fi; fi; done; exit ${ret} ) } domenu () { ( local i j ret=0; insinto /usr/share/applications; for i in "$@"; do if [[ -f ${i} ]]; then doins "${i}"; ((ret+=$?)); else if [[ -d ${i} ]]; then for j in "${i}"/*.desktop; do doins "${j}"; ((ret+=$?)); done; else ((++ret)); fi; fi; done; exit ${ret} ) } ebeep () { ewarn "QA Notice: ebeep is not defined in EAPI=${EAPI}, please file a bug at http://bugs.gentoo.org" } econf_build () { tc-env_build econf --build=${CBUILD:-${CHOST}} "$@" } ecvs_clean () { [[ -z $* ]] && set -- .; find "$@" -type d -name 'CVS' -prune -print0 | xargs -0 rm -rf; find "$@" -type f -name '.cvs*' -print0 | xargs -0 rm -rf } edos2unix () { [[ $# -eq 0 ]] && return 0; sed -i 's/\r$//' -- "$@" || die } egetent () { local db=$1 key=$2; [[ $# -ge 3 ]] && die "usage: egetent "; case ${db} in passwd | group) ;; *) die "sorry, database '${db}' not yet supported; file a bug" ;; esac; case ${CHOST} in *-darwin[678]) case ${key} in *[!0-9]*) nidump ${db} . | awk -F: "(\$1 ~ /^${key}\$/) {print;exit;}" ;; *) nidump ${db} . | awk -F: "(\$3 == ${key}) {print;exit;}" ;; esac ;; *-darwin*) local mykey; case ${db} in passwd) db="Users" mykey="UniqueID" ;; group) db="Groups" mykey="PrimaryGroupID" ;; esac; case ${key} in *[!0-9]*) dscl . -read /${db}/${key} 2> /dev/null | grep RecordName ;; *) dscl . -search /${db} ${mykey} ${key} 2> /dev/null ;; esac ;; *-freebsd* | *-dragonfly*) case ${db} in passwd) db="user" ;; *) ;; esac; local opts; if [[ ${key} == [[:digit:]]* ]]; then [[ ${db} == "user" ]] && opts="-u" || opts="-g"; fi; pw show ${db} ${opts} "${key}" -q ;; *-netbsd* | *-openbsd*) grep "${key}:\*:" /etc/${db} ;; *) nscd -i "${db}" 2> /dev/null; getent "${db}" "${key}" ;; esac } egethome () { local pos; [[ $# -eq 1 ]] || die "usage: egethome "; case ${CHOST} in *-darwin* | *-freebsd* | *-dragonfly*) pos=9 ;; *) pos=6 ;; esac; egetent passwd "$1" | cut -d: -f${pos} } egetshell () { local pos; [[ $# -eq 1 ]] || die "usage: egetshell "; case ${CHOST} in *-darwin* | *-freebsd* | *-dragonfly*) pos=10 ;; *) pos=7 ;; esac; egetent passwd "$1" | cut -d: -f${pos} } emktemp () { local exe="touch"; [[ $1 == -d ]] && exe="mkdir" && shift; local topdir=$1; if [[ -z ${topdir} ]]; then [[ -z ${T} ]] && topdir="/tmp" || topdir=${T}; fi; if ! type -P mktemp > /dev/null; then local tmp=/; while [[ -e ${tmp} ]]; do tmp=${topdir}/tmp.${RANDOM}.${RANDOM}.${RANDOM}; done; ${exe} "${tmp}" || ${exe} -p "${tmp}"; echo "${tmp}"; else if [[ ${exe} == "touch" ]]; then TMPDIR="${topdir}" mktemp -t tmp.XXXXXXXXXX; else TMPDIR="${topdir}" mktemp -dt tmp.XXXXXXXXXX; fi; fi } enewgroup () { _assert_pkg_ebuild_phase ${FUNCNAME}; local egroup=$1; shift; if [[ -z ${egroup} ]]; then eerror "No group specified !"; die "Cannot call enewgroup without a group"; fi; if [[ -n $(egetent group "${egroup}") ]]; then return 0; fi; einfo "Adding group '${egroup}' to your system ..."; local egid=$1; shift; if [[ ! -z ${egid} ]]; then if [[ ${egid} -gt 0 ]]; then if [[ -n $(egetent group ${egid}) ]]; then egid="next available; requested gid taken"; fi; else eerror "Groupid given but is not greater than 0 !"; die "${egid} is not a valid GID"; fi; else egid="next available"; fi; einfo " - Groupid: ${egid}"; if [[ $# -gt 0 ]]; then die "extra arguments no longer supported; please file a bug"; fi; function _enewgroup_next_gid () { if [[ ${egid} == *[!0-9]* ]]; then for ((egid = 101; egid <= 999; egid++)) do [[ -z $(egetent group ${egid}) ]] && break; done; fi }; case ${CHOST} in *-darwin*) _enewgroup_next_gid; dscl . create "/groups/${egroup}" gid ${egid}; dscl . create "/groups/${egroup}" passwd '*' ;; *-freebsd* | *-dragonfly*) _enewgroup_next_gid; pw groupadd "${egroup}" -g ${egid} || die ;; *-netbsd*) _enewgroup_next_gid; groupadd -g ${egid} "${egroup}" || die ;; *) local opts; if [[ ${egid} == *[!0-9]* ]]; then opts=""; else opts="-g ${egid}"; fi; groupadd -r ${opts} "${egroup}" || die ;; esac } enewuser () { _assert_pkg_ebuild_phase ${FUNCNAME}; local euser=$1; shift; if [[ -z ${euser} ]]; then eerror "No username specified !"; die "Cannot call enewuser without a username"; fi; if [[ -n $(egetent passwd "${euser}") ]]; then return 0; fi; einfo "Adding user '${euser}' to your system ..."; local opts=(); local euid=$1; shift; if [[ -n ${euid} && ${euid} != -1 ]]; then if [[ ${euid} -gt 0 ]]; then if [[ -n $(egetent passwd ${euid}) ]]; then euid="next"; fi; else eerror "Userid given but is not greater than 0 !"; die "${euid} is not a valid UID"; fi; else euid="next"; fi; if [[ ${euid} == "next" ]]; then for ((euid = 101; euid <= 999; euid++)) do [[ -z $(egetent passwd ${euid}) ]] && break; done; fi; opts+=(-u ${euid}); einfo " - Userid: ${euid}"; local eshell=$1; shift; if [[ ! -z ${eshell} ]] && [[ ${eshell} != "-1" ]]; then if [[ ! -e ${ROOT}${eshell} ]]; then eerror "A shell was specified but it does not exist !"; die "${eshell} does not exist in ${ROOT}"; fi; if [[ ${eshell} == */false || ${eshell} == */nologin ]]; then eerror "Do not specify ${eshell} yourself, use -1"; die "Pass '-1' as the shell parameter"; fi; else for eshell in /sbin/nologin /usr/sbin/nologin /bin/false /usr/bin/false /dev/null; do [[ -x ${ROOT}${eshell} ]] && break; done; if [[ ${eshell} == "/dev/null" ]]; then eerror "Unable to identify the shell to use, proceeding with userland default."; case ${USERLAND} in GNU) eshell="/bin/false" ;; BSD) eshell="/sbin/nologin" ;; Darwin) eshell="/usr/sbin/nologin" ;; *) die "Unable to identify the default shell for userland ${USERLAND}" ;; esac; fi; fi; einfo " - Shell: ${eshell}"; opts+=(-s "${eshell}"); local ehome=$1; shift; if [[ -z ${ehome} ]] || [[ ${ehome} == "-1" ]]; then ehome="/dev/null"; fi; einfo " - Home: ${ehome}"; opts+=(-d "${ehome}"); local egroups=$1; shift; local g egroups_arr; IFS="," read -r -a egroups_arr <<< "${egroups}"; shift; if [[ ${#egroups_arr[@]} -gt 0 ]]; then local defgroup exgroups; for g in "${egroups_arr[@]}"; do if [[ -z $(egetent group "${g}") ]]; then eerror "You must add group ${g} to the system first"; die "${g} is not a valid GID"; fi; if [[ -z ${defgroup} ]]; then defgroup=${g}; else exgroups+=",${g}"; fi; done; opts+=(-g "${defgroup}"); if [[ ! -z ${exgroups} ]]; then opts+=(-G "${exgroups:1}"); fi; fi; einfo " - Groups: ${egroups:-(none)}"; if [[ $# -gt 0 ]]; then die "extra arguments no longer supported; please file a bug"; else local comment="added by portage for ${PN}"; opts+=(-c "${comment}"); einfo " - GECOS: ${comment}"; fi; case ${CHOST} in *-darwin*) dscl . create "/users/${euser}" uid ${euid}; dscl . create "/users/${euser}" shell "${eshell}"; dscl . create "/users/${euser}" home "${ehome}"; dscl . create "/users/${euser}" realname "added by portage for ${PN}"; for g in "${egroups_arr[@]}"; do dscl . merge "/groups/${g}" users "${euser}"; done ;; *-freebsd* | *-dragonfly*) pw useradd "${euser}" "${opts[@]}" || die ;; *-netbsd*) useradd "${opts[@]}" "${euser}" || die ;; *-openbsd*) useradd -u ${euid} -s "${eshell}" -d "${ehome}" -g "${egroups}" "${euser}" || die ;; *) useradd -r "${opts[@]}" "${euser}" || die ;; esac; if [[ ! -e ${ROOT}/${ehome} ]]; then einfo " - Creating ${ehome} in ${ROOT}"; mkdir -p "${ROOT}/${ehome}"; chown "${euser}" "${ROOT}/${ehome}"; chmod 755 "${ROOT}/${ehome}"; fi } epatch () { function _epatch_draw_line () { [[ -z $1 ]] && set "$(printf "%65s" '')"; echo "${1//?/=}" }; unset P4CONFIG P4PORT P4USER; if [[ $# -gt 1 ]]; then local m; for m in "$@"; do epatch "${m}"; done; return 0; fi; local SINGLE_PATCH="no"; [[ $# -eq 0 ]] && set -- "${EPATCH_SOURCE}"; if [[ -f $1 ]]; then SINGLE_PATCH="yes"; set -- "$1"; local EPATCH_SUFFIX=$1; else if [[ -d $1 ]]; then set -- "$1"/*${EPATCH_SUFFIX:+."${EPATCH_SUFFIX}"}; else if [[ -f ${EPATCH_SOURCE}/$1 ]]; then epatch "${EPATCH_SOURCE}/$1"; return $?; else [[ $# -ne 0 ]] && EPATCH_SOURCE=$1; echo; eerror "Cannot find \$EPATCH_SOURCE! Value for \$EPATCH_SOURCE is:"; eerror; eerror " ${EPATCH_SOURCE}"; eerror " ( ${EPATCH_SOURCE##*/} )"; echo; die "Cannot find \$EPATCH_SOURCE!"; fi; fi; fi; local PIPE_CMD; case ${EPATCH_SUFFIX##*\.} in xz) PIPE_CMD="xz -dc" ;; lzma) PIPE_CMD="lzma -dc" ;; bz2) PIPE_CMD="bzip2 -dc" ;; gz | Z | z) PIPE_CMD="gzip -dc" ;; ZIP | zip) PIPE_CMD="unzip -p" ;; *) ;; esac; [[ ${SINGLE_PATCH} == "no" ]] && einfo "${EPATCH_MULTI_MSG}"; local x; for x in "$@"; do [[ ! -f ${x} ]] && continue; local patchname=${x##*/}; local a=${patchname#*_}; a=${a%%_*}; if ! [[ ${SINGLE_PATCH} == "yes" || ${EPATCH_FORCE} == "yes" || ${a} == all || ${a} == ${ARCH} ]]; then continue; fi; if [[ -n ${EPATCH_EXCLUDE} ]]; then eshopts_push -o noglob; local ex; for ex in ${EPATCH_EXCLUDE}; do if [[ ${patchname} == ${ex} ]]; then eshopts_pop; continue 2; fi; done; eshopts_pop; fi; if [[ ${SINGLE_PATCH} == "yes" ]]; then if [[ -n ${EPATCH_SINGLE_MSG} ]]; then einfo "${EPATCH_SINGLE_MSG}"; else einfo "Applying ${patchname} ..."; fi; else einfo " ${patchname} ..."; fi; local STDERR_TARGET="${T}/${patchname}.out"; if [[ -e ${STDERR_TARGET} ]]; then STDERR_TARGET="${T}/${patchname}-$$.out"; fi; printf "***** %s *****\nPWD: %s\n\n" "${patchname}" "${PWD}" > "${STDERR_TARGET}"; local count=0; local PATCH_TARGET; if [[ -n ${PIPE_CMD} ]]; then PATCH_TARGET="${T}/$$.patch"; echo "PIPE_COMMAND: ${PIPE_CMD} ${x} > ${PATCH_TARGET}" >> "${STDERR_TARGET}"; if ! ( ${PIPE_CMD} "${x}" > "${PATCH_TARGET}" ) >> "${STDERR_TARGET}" 2>&1; then echo; eerror "Could not extract patch!"; count=5; break; fi; else PATCH_TARGET=${x}; fi; local abs_paths=$(egrep -n '^[-+]{3} /' "${PATCH_TARGET}" | awk '$2 != "/dev/null" { print }'); if [[ -n ${abs_paths} ]]; then count=1; printf "NOTE: skipping -p0 due to absolute paths in patch:\n%s\n" "${abs_paths}" >> "${STDERR_TARGET}"; fi; local rel_paths=$(egrep -n '^[-+]{3} [^ ]*[.][.]/' "${PATCH_TARGET}"); if [[ -n ${rel_paths} ]]; then eqawarn "QA Notice: Your patch uses relative paths '../'."; eqawarn " In the future this will cause a failure."; eqawarn "${rel_paths}"; fi; local patch_cmd; while [[ ${count} -lt 5 ]]; do patch_cmd="patch -p${count} ${EPATCH_OPTS}"; ( _epatch_draw_line "***** ${patchname} *****"; echo; echo "PATCH COMMAND: ${patch_cmd} < '${PATCH_TARGET}'"; echo; _epatch_draw_line "***** ${patchname} *****"; ${patch_cmd} --dry-run -f < "${PATCH_TARGET}" 2>&1; ret=$?; echo; echo "patch program exited with status ${ret}"; exit ${ret} ) >> "${STDERR_TARGET}"; if [ $? -eq 0 ]; then ( _epatch_draw_line "***** ${patchname} *****"; echo; echo "ACTUALLY APPLYING ${patchname} ..."; echo; _epatch_draw_line "***** ${patchname} *****"; ${patch_cmd} < "${PATCH_TARGET}" 2>&1; ret=$?; echo; echo "patch program exited with status ${ret}"; exit ${ret} ) >> "${STDERR_TARGET}"; if [ $? -ne 0 ]; then echo; eerror "A dry-run of patch command succeeded, but actually"; eerror "applying the patch failed!"; count=5; fi; break; fi; : $(( count++ )); done; if [[ -n ${PIPE_CMD} ]]; then rm -f "${PATCH_TARGET}"; fi; if [[ ${count} -ge 5 ]]; then echo; eerror "Failed Patch: ${patchname} !"; eerror " ( ${PATCH_TARGET} )"; eerror; eerror "Include in your bugreport the contents of:"; eerror; eerror " ${STDERR_TARGET}"; echo; die "Failed Patch: ${patchname}!"; fi; rm -f "${STDERR_TARGET}"; cat >> "${T}/epatch.log" <<-EOF PATCH: ${x} CMD: ${patch_cmd} PWD: ${PWD} EOF eend 0; done; [[ ${SINGLE_PATCH} == "no" ]] && einfo "Done with patching"; : } epatch_user () { [[ $# -ne 0 ]] && die "epatch_user takes no options"; local applied="${T}/epatch_user.log"; [[ -e ${applied} ]] && return 2; local EPATCH_SOURCE check base=${PORTAGE_CONFIGROOT%/}/etc/portage/patches; for check in ${CATEGORY}/{${P}-${PR},${P},${PN}}; do EPATCH_SOURCE=${base}/${CTARGET}/${check}; [[ -r ${EPATCH_SOURCE} ]] || EPATCH_SOURCE=${base}/${CHOST}/${check}; [[ -r ${EPATCH_SOURCE} ]] || EPATCH_SOURCE=${base}/${check}; if [[ -d ${EPATCH_SOURCE} ]]; then EPATCH_SOURCE=${EPATCH_SOURCE} EPATCH_SUFFIX="patch" EPATCH_FORCE="yes" EPATCH_MULTI_MSG="Applying user patches from ${EPATCH_SOURCE} ..." epatch; echo "${EPATCH_SOURCE}" > "${applied}"; return 0; fi; done; echo "none" > "${applied}"; return 1 } epause () { ewarn "QA Notice: epause is not defined in EAPI=${EAPI}, please file a bug at http://bugs.gentoo.org" } eprefixify () { [[ $# -lt 1 ]] && die "at least one argument required"; einfo "Adjusting to prefix ${EPREFIX:-/}"; local x; for x in "$@"; do if [[ -e ${x} ]]; then ebegin " ${x##*/}"; sed -i -e "s|@GENTOO_PORTAGE_EPREFIX@|${EPREFIX}|g" "${x}"; eend $? || die "failed to eprefixify ${x}"; else die "${x} does not exist"; fi; done; return 0 } epunt_cxx () { local dir=$1; [[ -z ${dir} ]] && dir=${S}; ebegin "Removing useless C++ checks"; local f; find "${dir}" -name configure | while read f; do patch --no-backup-if-mismatch -p0 "${f}" "${PORTDIR}/eclass/ELT-patches/nocxx/nocxx.patch" > /dev/null; done; eend 0 } eshopts_pop () { local s; estack_pop eshopts s || die "${FUNCNAME}: unbalanced push"; if [[ ${s} == "shopt -"* ]]; then eval "${s}" || die "${FUNCNAME}: sanity: invalid shopt options: ${s}"; else set +$- || die "${FUNCNAME}: sanity: invalid shell settings: $-"; set -${s} || die "${FUNCNAME}: sanity: unable to restore saved shell settings: ${s}"; fi } eshopts_push () { if [[ $1 == -[su] ]]; then estack_push eshopts "$(shopt -p)"; [[ $# -eq 0 ]] && return 0; shopt "$@" || die "${FUNCNAME}: bad options to shopt: $*"; else estack_push eshopts $-; [[ $# -eq 0 ]] && return 0; set "$@" || die "${FUNCNAME}: bad options to set: $*"; fi } estack_pop () { [[ $# -eq 0 || $# -gt 2 ]] && die "estack_pop: incorrect # of arguments"; local __estack_name="__ESTACK_$1__"; shift; local __estack_retvar=$1; shift; eval local __estack_i=\${#${__estack_name}\[@\]}; [[ $(( --__estack_i )) -eq -1 ]] && return 1; if [[ -n ${__estack_retvar} ]]; then eval ${__estack_retvar}=\"\${${__estack_name}\[${__estack_i}\]}\"; fi; eval unset ${__estack_name}\[${__estack_i}\] } estack_push () { [[ $# -eq 0 ]] && die "estack_push: incorrect # of arguments"; local stack_name="__ESTACK_$1__"; shift; eval ${stack_name}+=\( \"\$@\" \) } esvn_clean () { [[ -z $* ]] && set -- .; find "$@" -type d -name '.svn' -prune -print0 | xargs -0 rm -rf } eumask_pop () { [[ $# -eq 0 ]] || die "${FUNCNAME}: we take no options"; local s; estack_pop eumask s || die "${FUNCNAME}: unbalanced push"; umask ${s} || die "${FUNCNAME}: sanity: could not restore umask: ${s}" } eumask_push () { estack_push eumask "$(umask)"; umask "$@" || die "${FUNCNAME}: bad options to umask: $*" } gcc-fullversion () { _gcc_fullversion '$1.$2.$3' "$@" } gcc-major-version () { _gcc_fullversion '$1' "$@" } gcc-micro-version () { _gcc_fullversion '$3' "$@" } gcc-minor-version () { _gcc_fullversion '$2' "$@" } gcc-specs-directive () { local directive subdname subdirective; directive="$(_gcc-specs-directive_raw $1)"; while [[ ${directive} == *%\(*\)* ]]; do subdname=${directive/*%\(}; subdname=${subdname/\)*}; subdirective="$(_gcc-specs-directive_raw ${subdname})"; directive="${directive//\%(${subdname})/${subdirective}}"; done; echo "${directive}"; return 0 } gcc-specs-nostrict () { local directive; directive=$(gcc-specs-directive cc1); return $([[ "${directive/\{!fstrict-overflow:}" != "${directive}" ]]) } gcc-specs-now () { local directive; directive=$(gcc-specs-directive link_command); return $([[ "${directive/\{!nonow:}" != "${directive}" ]]) } gcc-specs-pie () { local directive; directive=$(gcc-specs-directive cc1); return $([[ "${directive/\{!nopie:}" != "${directive}" ]]) } gcc-specs-relro () { local directive; directive=$(gcc-specs-directive link_command); return $([[ "${directive/\{!norelro:}" != "${directive}" ]]) } gcc-specs-ssp () { local directive; directive=$(gcc-specs-directive cc1); return $([[ "${directive/\{!fno-stack-protector:}" != "${directive}" ]]) } gcc-specs-ssp-to-all () { local directive; directive=$(gcc-specs-directive cc1); return $([[ "${directive/\{!fno-stack-protector-all:}" != "${directive}" ]]) } gcc-version () { _gcc_fullversion '$1.$2' "$@" } gen_usr_ldscript () { local lib libdir=$(get_libdir) output_format="" auto=false suffix=$(get_libname); [[ -z ${ED+set} ]] && local ED=${D%/}${EPREFIX}/; tc-is-static-only && return; dodir /usr/${libdir}; if [[ $1 == "-a" ]]; then auto=true; shift; dodir /${libdir}; fi; output_format=$($(tc-getCC) ${CFLAGS} ${LDFLAGS} -Wl,--verbose 2>&1 | sed -n 's/^OUTPUT_FORMAT("\([^"]*\)",.*/\1/p'); [[ -n ${output_format} ]] && output_format="OUTPUT_FORMAT ( ${output_format} )"; for lib in "$@"; do local tlib; if ${auto}; then lib="lib${lib}${suffix}"; else [[ -r ${ED}/${libdir}/${lib} ]] || continue; fi; case ${CTARGET:-${CHOST}} in *-darwin*) if ${auto}; then tlib=$(scanmacho -qF'%S#F' "${ED}"/usr/${libdir}/${lib}); else tlib=$(scanmacho -qF'%S#F' "${ED}"/${libdir}/${lib}); fi; [[ -z ${tlib} ]] && die "unable to read install_name from ${lib}"; tlib=${tlib##*/}; if ${auto}; then mv "${ED}"/usr/${libdir}/${lib%${suffix}}.*${suffix#.} "${ED}"/${libdir}/ || die; if [[ ${tlib} != ${lib%${suffix}}.*${suffix#.} ]]; then mv "${ED}"/usr/${libdir}/${tlib%${suffix}}.*${suffix#.} "${ED}"/${libdir}/ || die; fi; rm -f "${ED}"/${libdir}/${lib}; fi; if [[ ! -w "${ED}/${libdir}/${tlib}" ]]; then chmod u+w "${ED}${libdir}/${tlib}"; local nowrite=yes; fi; install_name_tool -id "${EPREFIX}"/${libdir}/${tlib} "${ED}"/${libdir}/${tlib} || die "install_name_tool failed"; [[ -n ${nowrite} ]] && chmod u-w "${ED}${libdir}/${tlib}"; pushd "${ED}/usr/${libdir}" > /dev/null; ln -snf "../../${libdir}/${tlib}" "${lib}"; popd > /dev/null ;; *-aix* | *-irix* | *64*-hpux* | *-interix* | *-winnt*) if ${auto}; then mv "${ED}"/usr/${libdir}/${lib}* "${ED}"/${libdir}/ || die; tlib=$(readlink "${ED}"/${libdir}/${lib}); tlib=${tlib##*/}; if [[ -z ${tlib} ]]; then tlib=${lib}; else rm -f "${ED}"/${libdir}/${lib}; fi; else tlib=${lib}; fi; pushd "${ED}/usr/${libdir}" > /dev/null; ln -snf "../../${libdir}/${tlib}" "${lib}"; popd > /dev/null ;; hppa*-hpux*) if ${auto}; then tlib=$(chatr "${ED}"/usr/${libdir}/${lib} | sed -n '/internal name:/{n;s/^ *//;p;q}'); [[ -z ${tlib} ]] && tlib=${lib}; tlib=${tlib##*/}; mv "${ED}"/usr/${libdir}/${lib}* "${ED}"/${libdir}/ || die; if [[ ${tlib} != ${lib}* ]]; then mv "${ED}"/usr/${libdir}/${tlib}* "${ED}"/${libdir}/ || die; fi; [[ ${tlib} != ${lib} ]] && rm -f "${ED}"/${libdir}/${lib}; else tlib=$(chatr "${ED}"/${libdir}/${lib} | sed -n '/internal name:/{n;s/^ *//;p;q}'); [[ -z ${tlib} ]] && tlib=${lib}; tlib=${tlib##*/}; fi; pushd "${ED}"/usr/${libdir} > /dev/null; ln -snf "../../${libdir}/${tlib}" "${lib}"; [[ ${tlib} != ${lib} ]] && ln -snf "../../${libdir}/${tlib}" "${tlib}"; popd > /dev/null ;; *) if ${auto}; then tlib=$(scanelf -qF'%S#F' "${ED}"/usr/${libdir}/${lib}); [[ -z ${tlib} ]] && die "unable to read SONAME from ${lib}"; mv "${ED}"/usr/${libdir}/${lib}* "${ED}"/${libdir}/ || die; if [[ ${tlib} != ${lib}* ]]; then mv "${ED}"/usr/${libdir}/${tlib}* "${ED}"/${libdir}/ || die; fi; rm -f "${ED}"/${libdir}/${lib}; else tlib=${lib}; fi; cat > "${ED}/usr/${libdir}/${lib}" <<-END_LDSCRIPT /* GNU ld script Since Gentoo has critical dynamic libraries in /lib, and the static versions in /usr/lib, we need to have a "fake" dynamic lib in /usr/lib, otherwise we run into linking problems. This "fake" dynamic lib is a linker script that redirects the linker to the real lib. And yes, this works in the cross- compiling scenario as the sysroot-ed linker will prepend the real path. See bug http://bugs.gentoo.org/4411 for more info. */ ${output_format} GROUP ( ${EPREFIX}/${libdir}/${tlib} ) END_LDSCRIPT ;; esac fperms a+x "/usr/${libdir}/${lib}" || die "could not change perms on ${lib}"; done } get_abi_CFLAGS () { get_abi_var CFLAGS "$@" } get_abi_CHOST () { get_abi_var CHOST "$@" } get_abi_CTARGET () { get_abi_var CTARGET "$@" } get_abi_FAKE_TARGETS () { get_abi_var FAKE_TARGETS "$@" } get_abi_LDFLAGS () { get_abi_var LDFLAGS "$@" } get_abi_LIBDIR () { get_abi_var LIBDIR "$@" } get_abi_var () { local flag=$1; local abi=${2:-${ABI:-${DEFAULT_ABI:-default}}}; local var="${flag}_${abi}"; echo ${!var} } get_all_abis () { local order=""; if [[ -z ${MULTILIB_ABIS} ]]; then echo "default"; return 0; fi; for x in ${MULTILIB_ABIS}; do if [[ ${x} != ${DEFAULT_ABI} ]]; then order="${order:+${order} }${x}"; fi; done; order="${order:+${order} }${DEFAULT_ABI}"; echo ${order}; return 0 } get_all_libdirs () { local libdirs; local abi; local dir; for abi in ${MULTILIB_ABIS}; do libdirs+=" $(get_abi_LIBDIR ${abi})"; done; [[ " ${libdirs} " != *" lib "* ]] && libdirs+=" lib"; echo "${libdirs}" } get_bmake () { if [[ ${USERLAND} == *BSD ]]; then echo make; else if [[ ${USERLAND} == "Darwin" ]]; then echo bsdmake; else echo pmake; fi; fi } get_install_abis () { local order=""; if [[ -z ${MULTILIB_ABIS} ]]; then echo "default"; return 0; fi; if [[ ${EMULTILIB_PKG} == "true" ]]; then for x in ${MULTILIB_ABIS}; do if [[ ${x} != "${DEFAULT_ABI}" ]]; then has ${x} ${ABI_DENY} || order="${order} ${x}"; fi; done; has ${DEFAULT_ABI} ${ABI_DENY} || order="${order} ${DEFAULT_ABI}"; if [[ -n ${ABI_ALLOW} ]]; then local ordera=""; for x in ${order}; do if has ${x} ${ABI_ALLOW}; then ordera="${ordera} ${x}"; fi; done; order=${ordera}; fi; else order=${DEFAULT_ABI}; fi; if [[ -z ${order} ]]; then die "The ABI list is empty. Are you using a proper multilib profile? Perhaps your USE flags or MULTILIB_ABIS are too restrictive for this package."; fi; echo ${order}; return 0 } get_libdir () { local CONF_LIBDIR; if [ -n "${CONF_LIBDIR_OVERRIDE}" ]; then echo ${CONF_LIBDIR_OVERRIDE}; else get_abi_LIBDIR; fi } get_libname () { local libname; local ver=$1; case ${CHOST} in *-cygwin | mingw* | *-mingw*) libname="dll" ;; *-darwin*) libname="dylib" ;; *-mint*) libname="irrelevant" ;; hppa*-hpux*) libname="sl" ;; *) libname="so" ;; esac; if [[ -z $* ]]; then echo ".${libname}"; else for ver in "$@"; do case ${CHOST} in *-darwin*) echo ".${ver}.${libname}" ;; *-mint*) echo ".${libname}" ;; *) echo ".${libname}.${ver}" ;; esac; done; fi } get_modname () { local modname; local ver=$1; case ${CHOST} in *-darwin*) modname="bundle" ;; *) modname="so" ;; esac; echo ".${modname}" } get_mounts () { local point= node= fs= opts= foo=; if [[ $(uname -s) == "Linux" ]]; then while read node point fs opts foo; do echo "${point} ${node} ${fs} ${opts}"; done < /proc/mounts; return; fi; local IFS=' '; LC_ALL=C mount -p | while read node point fs foo; do opts=${fs#* }; fs=${fs%% *}; echo "${point// /\040} ${node// /\040} ${fs%% *} ${opts// /\040}"; done } has_multilib_profile () { [ -n "${MULTILIB_ABIS}" -a "${MULTILIB_ABIS}" != "${MULTILIB_ABIS/ /}" ] } in_iuse () { debug-print-function ${FUNCNAME} "${@}"; [[ ${#} -eq 1 ]] || die "Invalid args to ${FUNCNAME}()"; local flag=${1}; local liuse=(${IUSE}); has "${flag}" "${liuse[@]#[+-]}" } is-login-disabled () { _dead_portability_user_funcs } is_final_abi () { has_multilib_profile || return 0; set -- $(get_install_abis); local LAST_ABI=$#; [[ ${!LAST_ABI} == ${ABI} ]] } make_desktop_entry () { [[ -z $1 ]] && die "make_desktop_entry: You must specify the executable"; local exec=${1}; local name=${2:-${PN}}; local icon=${3:-${PN}}; local type=${4}; local fields=${5}; if [[ -z ${type} ]]; then local catmaj=${CATEGORY%%-*}; local catmin=${CATEGORY##*-}; case ${catmaj} in app) case ${catmin} in accessibility) type=Accessibility ;; admin) type=System ;; antivirus) type=System ;; arch) type=Archiving ;; backup) type=Archiving ;; cdr) type=DiscBurning ;; dicts) type=Dictionary ;; doc) type=Documentation ;; editors) type=TextEditor ;; emacs) type=TextEditor ;; emulation) type=Emulator ;; laptop) type=HardwareSettings ;; office) type=Office ;; pda) type=PDA ;; vim) type=TextEditor ;; xemacs) type=TextEditor ;; esac ;; dev) type="Development" ;; games) case ${catmin} in action | fps) type=ActionGame ;; arcade) type=ArcadeGame ;; board) type=BoardGame ;; emulation) type=Emulator ;; kids) type=KidsGame ;; puzzle) type=LogicGame ;; roguelike) type=RolePlaying ;; rpg) type=RolePlaying ;; simulation) type=Simulation ;; sports) type=SportsGame ;; strategy) type=StrategyGame ;; esac; type="Game;${type}" ;; gnome) type="Gnome;GTK" ;; kde) type="KDE;Qt" ;; mail) type="Network;Email" ;; media) case ${catmin} in gfx) type=Graphics ;; *) case ${catmin} in radio) type=Tuner ;; sound) type=Audio ;; tv) type=TV ;; video) type=Video ;; esac; type="AudioVideo;${type}" ;; esac ;; net) case ${catmin} in dialup) type=Dialup ;; ftp) type=FileTransfer ;; im) type=InstantMessaging ;; irc) type=IRCClient ;; mail) type=Email ;; news) type=News ;; nntp) type=News ;; p2p) type=FileTransfer ;; voip) type=Telephony ;; esac; type="Network;${type}" ;; sci) case ${catmin} in astro*) type=Astronomy ;; bio*) type=Biology ;; calc*) type=Calculator ;; chem*) type=Chemistry ;; elec*) type=Electronics ;; geo*) type=Geology ;; math*) type=Math ;; physics) type=Physics ;; visual*) type=DataVisualization ;; esac; type="Education;Science;${type}" ;; sys) type="System" ;; www) case ${catmin} in client) type=WebBrowser ;; esac; type="Network;${type}" ;; *) type= ;; esac; fi; if [ "${SLOT}" == "0" ]; then local desktop_name="${PN}"; else local desktop_name="${PN}-${SLOT}"; fi; local desktop="${T}/$(echo ${exec} | sed 's:[[:space:]/:]:_:g')-${desktop_name}.desktop"; type=${type%;}${type:+;}; eshopts_push -s extglob; if [[ -n ${icon} && ${icon} != /* ]] && [[ ${icon} == *.xpm || ${icon} == *.png || ${icon} == *.svg ]]; then ewarn "As described in the Icon Theme Specification, icon file extensions are not"; ewarn "allowed in .desktop files if the value is not an absolute path."; icon=${icon%.@(xpm|png|svg)}; fi; eshopts_pop; cat > "${desktop}" <<-EOF [Desktop Entry] Name=${name} Type=Application Comment=${DESCRIPTION} Exec=${exec} TryExec=${exec%% *} Icon=${icon} Categories=${type} EOF if [[ ${fields:-=} != *=* ]]; then ewarn "make_desktop_entry: update your 5th arg to read Path=${fields}"; fields="Path=${fields}"; fi; [[ -n ${fields} ]] && printf '%b\n' "${fields}" >> "${desktop}"; ( insinto /usr/share/applications; doins "${desktop}" ) || die "installing desktop file failed" } make_session_desktop () { [[ -z $1 ]] && eerror "$0: You must specify the title" && return 1; [[ -z $2 ]] && eerror "$0: You must specify the command" && return 1; local title=$1; local command=$2; local desktop=${T}/${wm:-${PN}}.desktop; shift 2; cat > "${desktop}" <<-EOF [Desktop Entry] Name=${title} Comment=This session logs you into ${title} Exec=${command} $* TryExec=${command} Type=XSession EOF ( insinto /usr/share/xsessions; doins "${desktop}" ) } make_wrapper () { local wrapper=$1 bin=$2 chdir=$3 libdir=$4 path=$5; local tmpwrapper=$(emktemp); cat > "${tmpwrapper}" < [more libraries to preserve]"; has preserve-libs ${FEATURES} && return 0; local lib dir; for lib in "$@"; do [[ -e ${ROOT}/${lib} ]] || continue; dir=${lib%/*}; dodir ${dir} || die "dodir ${dir} failed"; cp "${ROOT}"/${lib} "${D}"/${lib} || die "cp ${lib} failed"; touch "${D}"/${lib}; done } preserve_old_lib_notify () { if [[ ${EBUILD_PHASE} != "postinst" ]]; then eerror "preserve_old_lib_notify() must be called from pkg_postinst() only"; die "Invalid preserve_old_lib_notify() usage"; fi; has preserve-libs ${FEATURES} && return 0; local lib notice=0; for lib in "$@"; do [[ -e ${ROOT}/${lib} ]] || continue; if [[ ${notice} -eq 0 ]]; then notice=1; ewarn "Old versions of installed libraries were detected on your system."; ewarn "In order to avoid breaking packages that depend on these old libs,"; ewarn "the libraries are not being removed. You need to run revdep-rebuild"; ewarn "in order to remove these old dependencies. If you do not have this"; ewarn "helper program, simply emerge the 'gentoolkit' package."; ewarn; fi; [[ ${PN} == "mpfr" ]] && lib=${lib##*/}; ewarn " # revdep-rebuild --library '${lib}'"; done; if [[ ${notice} -eq 1 ]]; then ewarn; ewarn "Once you've finished running revdep-rebuild, it should be safe to"; ewarn "delete the old libraries. Here is a copy & paste for the lazy:"; for lib in "$@"; do ewarn " # rm '${lib}'"; done; fi } seq () { local p=$(type -P seq); if [[ -n ${p} ]]; then "${p}" "$@"; return $?; fi; local min max step; case $# in 1) min=1 max=$1 step=1 ;; 2) min=$1 max=$2 step=1 ;; 3) min=$1 max=$3 step=$2 ;; *) die "seq called with wrong number of arguments" ;; esac; p=$(type -P jot); if [[ -n ${p} ]]; then local reps; if [[ ${step} != 0 ]]; then reps=$(( (max - min) / step + 1 )); else reps=0; fi; jot $reps $min $max $step; return $?; fi; while :; do [[ $max < $min && $step > 0 ]] && break; [[ $min < $max && $step < 0 ]] && break; echo $min; : $(( min += step )); done; return 0 } src_compile () { _eapi2_src_compile "$@" } src_configure () { _eapi2_src_configure "$@" } src_install () { local l bl; emake DESTDIR="${D}" INSTALL_ROOT="${D}" install || die "emake install failed"; for l in "${ED}"/usr/lib*/Img*/*tcl*.so; do bl=$(basename $l); dosym Img1.4/${bl} /usr/$(get_libdir)/${bl}; done; dodoc ChangeLog README Reorganization.Notes.txt changes ANNOUNCE || die; if use doc; then insinto /usr/share/doc/${PF}; doins demo.tcl || die; insinto /usr/share/doc/${PF}/html; doins -r doc/* || die; fi } src_prepare () { epatch "${WORKDIR}"/${P}-gentoo+bundled-tiff.patch "${FILESDIR}"/${P}-jbig.patch; find compat/{libjpeg,libpng,zlib} -delete; sed -e 's:-O2 -fomit-frame-pointer::g' -e 's: -pipe::g' -i */configure || die; eprefixify */*.h } src_test () { Xemake test || die "Xmake failed" } src_unpack () { _eapi0_src_unpack "$@" } strip-linguas () { local ls newls nols; if [[ $1 == "-i" ]] || [[ $1 == "-u" ]]; then local op=$1; shift; ls=$(find "$1" -name '*.po' -exec basename {} .po ';'); shift; local d f; for d in "$@"; do if [[ ${op} == "-u" ]]; then newls=${ls}; else newls=""; fi; for f in $(find "$d" -name '*.po' -exec basename {} .po ';'); do if [[ ${op} == "-i" ]]; then has ${f} ${ls} && newls="${newls} ${f}"; else has ${f} ${ls} || newls="${newls} ${f}"; fi; done; ls=${newls}; done; else ls="$@"; fi; nols=""; newls=""; for f in ${LINGUAS}; do if has ${f} ${ls}; then newls="${newls} ${f}"; else nols="${nols} ${f}"; fi; done; [[ -n ${nols} ]] && ewarn "Sorry, but ${PN} does not support the LINGUAS:" ${nols}; export LINGUAS=${newls:1} } tc-arch () { tc-ninja_magic_to_arch portage "$@" } tc-arch-kernel () { tc-ninja_magic_to_arch kern "$@" } tc-endian () { local host=$1; [[ -z ${host} ]] && host=${CTARGET:-${CHOST}}; host=${host%%-*}; case ${host} in alpha*) echo big ;; arm*b*) echo big ;; arm*) echo little ;; cris*) echo little ;; hppa*) echo big ;; i?86*) echo little ;; ia64*) echo little ;; m68*) echo big ;; mips*l*) echo little ;; mips*) echo big ;; powerpc*) echo big ;; s390*) echo big ;; sh*b*) echo big ;; sh*) echo little ;; sparc*) echo big ;; x86_64*) echo little ;; *) echo wtf ;; esac } tc-env_build () { CFLAGS=${BUILD_CFLAGS:--O1 -pipe} CXXFLAGS=${BUILD_CXXFLAGS:--O1 -pipe} CPPFLAGS=${BUILD_CPPFLAGS} LDFLAGS=${BUILD_LDFLAGS} AR=$(tc-getBUILD_AR) AS=$(tc-getBUILD_AS) CC=$(tc-getBUILD_CC) CPP=$(tc-getBUILD_CPP) CXX=$(tc-getBUILD_CXX) LD=$(tc-getBUILD_LD) NM=$(tc-getBUILD_NM) PKG_CONFIG=$(tc-getBUILD_PKG_CONFIG) RANLIB=$(tc-getBUILD_RANLIB) "$@" } tc-export () { local var; for var in "$@"; do [[ $(type -t tc-get${var}) != "function" ]] && die "tc-export: invalid export variable '${var}'"; eval tc-get${var} > /dev/null; done } tc-getAR () { tc-getPROG AR ar "$@" } tc-getAS () { tc-getPROG AS as "$@" } tc-getBUILD_AR () { tc-getBUILD_PROG AR ar "$@" } tc-getBUILD_AS () { tc-getBUILD_PROG AS as "$@" } tc-getBUILD_CC () { tc-getBUILD_PROG CC gcc "$@" } tc-getBUILD_CPP () { tc-getBUILD_PROG CPP cpp "$@" } tc-getBUILD_CXX () { tc-getBUILD_PROG CXX g++ "$@" } tc-getBUILD_LD () { tc-getBUILD_PROG LD ld "$@" } tc-getBUILD_NM () { tc-getBUILD_PROG NM nm "$@" } tc-getBUILD_OBJCOPY () { tc-getBUILD_PROG OBJCOPY objcopy "$@" } tc-getBUILD_PKG_CONFIG () { tc-getBUILD_PROG PKG_CONFIG pkg-config "$@" } tc-getBUILD_PROG () { _tc-getPROG CBUILD "BUILD_$1 $1_FOR_BUILD HOST$1" "${@:2}" } tc-getBUILD_RANLIB () { tc-getBUILD_PROG RANLIB ranlib "$@" } tc-getBUILD_STRIP () { tc-getBUILD_PROG STRIP strip "$@" } tc-getCC () { tc-getPROG CC gcc "$@" } tc-getCPP () { tc-getPROG CPP cpp "$@" } tc-getCXX () { tc-getPROG CXX g++ "$@" } tc-getDLLWRAP () { tc-getPROG DLLWRAP dllwrap "$@" } tc-getF77 () { tc-getPROG F77 gfortran "$@" } tc-getFC () { tc-getPROG FC gfortran "$@" } tc-getGCJ () { tc-getPROG GCJ gcj "$@" } tc-getLD () { tc-getPROG LD ld "$@" } tc-getNM () { tc-getPROG NM nm "$@" } tc-getOBJCOPY () { tc-getPROG OBJCOPY objcopy "$@" } tc-getPKG_CONFIG () { tc-getPROG PKG_CONFIG pkg-config "$@" } tc-getPROG () { _tc-getPROG CHOST "$@" } tc-getRANLIB () { tc-getPROG RANLIB ranlib "$@" } tc-getRC () { tc-getPROG RC windres "$@" } tc-getSTRIP () { tc-getPROG STRIP strip "$@" } tc-has-openmp () { local base="${T}/test-tc-openmp"; cat > "${base}.c" <<-EOF #include int main() { int nthreads, tid, ret = 0; #pragma omp parallel private(nthreads, tid) { tid = omp_get_thread_num(); nthreads = omp_get_num_threads(); ret += tid + nthreads; } return ret; } EOF $(tc-getCC "$@") -fopenmp "${base}.c" -o "${base}" &>/dev/null; local ret=$?; rm -f "${base}"*; return ${ret} } tc-has-tls () { local base="${T}/test-tc-tls"; cat > "${base}.c" <<-EOF int foo(int *i) { static __thread int j = 0; return *i ? j : *i; } EOF local flags; case $1 in -s) flags="-S" ;; -c) flags="-c" ;; -l) ;; -*) die "Usage: tc-has-tls [-c|-l] [toolchain prefix]" ;; esac; : ${flags:=-fPIC -shared -Wl,-z,defs}; [[ $1 == -* ]] && shift; $(tc-getCC "$@") ${flags} "${base}.c" -o "${base}" &>/dev/null; local ret=$?; rm -f "${base}"*; return ${ret} } tc-is-cross-compiler () { return $([[ ${CBUILD:-${CHOST}} != ${CHOST} ]]) } tc-is-hardfloat () { [[ ${CTARGET//_/-} == *-hardfloat-* ]] && echo "yes" || echo "no" } tc-is-softfloat () { case ${CTARGET} in bfin* | h8300*) echo "only" ;; *) [[ ${CTARGET//_/-} == *-softfloat-* ]] && echo "yes" || echo "no" ;; esac } tc-is-static-only () { local host=${CTARGET:-${CHOST}}; return $([[ ${host} == *-mint* ]]) } tc-ninja_magic_to_arch () { function ninj () { [[ ${type} == "kern" ]] && echo $1 || echo $2 }; local type=$1; local host=$2; [[ -z ${host} ]] && host=${CTARGET:-${CHOST}}; case ${host} in alpha*) echo alpha ;; arm*) echo arm ;; avr*) ninj avr32 avr ;; bfin*) ninj blackfin bfin ;; cris*) echo cris ;; hppa*) ninj parisc hppa ;; i?86*) if [[ ${type} == "kern" ]] && [[ $(KV_to_int ${KV}) -lt $(KV_to_int 2.6.24) || ${host} == *freebsd* ]]; then echo i386; else echo x86; fi ;; ia64*) echo ia64 ;; m68*) echo m68k ;; mips*) echo mips ;; nios2*) echo nios2 ;; nios*) echo nios ;; powerpc*) if [[ ${type} == "kern" ]] && [[ $(KV_to_int ${KV}) -ge $(KV_to_int 2.6.16) ]]; then echo powerpc; else if [[ ${type} == "kern" ]] && [[ $(KV_to_int ${KV}) -eq $(KV_to_int 2.6.15) ]]; then if [[ ${host} == powerpc64* ]] || [[ ${PROFILE_ARCH} == "ppc64" ]]; then echo powerpc; else echo ppc; fi; else if [[ ${host} == powerpc64* ]]; then echo ppc64; else if [[ ${PROFILE_ARCH} == "ppc64" ]]; then ninj ppc64 ppc; else echo ppc; fi; fi; fi; fi ;; s390*) echo s390 ;; sh64*) ninj sh64 sh ;; sh*) echo sh ;; sparc64*) ninj sparc64 sparc ;; sparc*) [[ ${PROFILE_ARCH} == "sparc64" ]] && ninj sparc64 sparc || echo sparc ;; vax*) echo vax ;; x86_64*freebsd*) echo amd64 ;; x86_64*) if [[ ${type} == "kern" ]] && [[ $(KV_to_int ${KV}) -ge $(KV_to_int 2.6.24) ]]; then echo x86; else ninj x86_64 amd64; fi ;; *) echo unknown ;; esac } treecopy () { local dest=${!#}; local files_count=$#; while (( $# > 1 )); do local dirstruct=$(dirname "$1"); mkdir -p "${dest}/${dirstruct}"; cp -pPR "$1" "${dest}/${dirstruct}"; shift; done } use_if_iuse () { in_iuse $1 || return 1; use $1 } usex () { use "$1" && echo "${2-yes}$4" || echo "${3-no}$5" } validate_desktop_entries () { if [[ -x /usr/bin/desktop-file-validate ]]; then einfo "Checking desktop entry validity"; local directories=""; for d in /usr/share/applications $@; do [[ -d ${D}${d} ]] && directories="${directories} ${D}${d}"; done; if [[ -n ${directories} ]]; then for FILE in $(find ${directories} -name "*\.desktop" -not -path '*.hidden*' | sort -u 2>/dev/null); do local temp=$(desktop-file-validate ${FILE} | grep -v "warning:" | sed -e "s|error: ||" -e "s|${FILE}:|--|g" ); [[ -n $temp ]] && elog ${temp/--/${FILE/${D}/}:}; done; fi; echo ""; else einfo "Passing desktop entry validity check. Install dev-util/desktop-file-utils, if you want to help to improve Gentoo."; fi } virtualmake () { debug-print-function ${FUNCNAME} "$@"; local i=0; local retval=0; local OLD_SANDBOX_ON="${SANDBOX_ON}"; local XVFB=$(type -p Xvfb); local XHOST=$(type -p xhost); local xvfbargs="-screen 0 800x600x24"; if [[ -n ${maketype} ]]; then ewarn "QA: ebuild is exporting \$maketype=${maketype}"; ewarn "QA: Ebuild should be migrated to use VIRTUALX_COMMAND=${maketype} instead."; ewarn "QA: Setting VIRTUALX_COMMAND to \$maketype conveniently for now."; VIRTUALX_COMMAND=${maketype}; fi; if [[ -n ${XVFB} && -n ${XHOST} ]] && ( [[ -z ${DISPLAY} ]] || ! ( ${XHOST} &>/dev/null ) ); then debug-print "${FUNCNAME}: running Xvfb hack"; export XAUTHORITY=; einfo "Scanning for an open DISPLAY to start Xvfb ..."; XDISPLAY=$(i=0; while [[ -f /tmp/.X${i}-lock ]] ; do ((i++));done; echo ${i}); debug-print "${FUNCNAME}: XDISPLAY=${XDISPLAY}"; export SANDBOX_ON="0"; debug-print "${FUNCNAME}: ${XVFB} :${XDISPLAY} ${xvfbargs}"; ${XVFB} :${XDISPLAY} ${xvfbargs} &>/dev/null & sleep 2; local start=${XDISPLAY}; while [[ ! -f /tmp/.X${XDISPLAY}-lock ]]; do if ((XDISPLAY - start > 15)); then eerror "'${XVFB} :${XDISPLAY} ${xvfbargs}' returns:"; echo; ${XVFB} :${XDISPLAY} ${xvfbargs}; echo; eerror "If possible, correct the above error and try your emerge again."; die "Unable to start Xvfb"; fi; ((XDISPLAY++)); debug-print "${FUNCNAME}: ${XVFB} :${XDISPLAY} ${xvfbargs}"; ${XVFB} :${XDISPLAY} ${xvfbargs} &>/dev/null & sleep 2; done; export SANDBOX_ON="${OLD_SANDBOX_ON}"; einfo "Starting Xvfb on \$DISPLAY=${XDISPLAY} ..."; export DISPLAY=:${XDISPLAY}; debug-print "${FUNCNAME}: ${VIRTUALX_COMMAND} \"$@\""; ${VIRTUALX_COMMAND} "$@"; retval=$?; kill $(cat /tmp/.X${XDISPLAY}-lock); else debug-print "${FUNCNAME}: attaching to running X display"; debug-print "${FUNCNAME}: ${VIRTUALX_COMMAND} \"$@\""; ${VIRTUALX_COMMAND} "$@"; retval=$?; fi; [[ ${retval} -ne 0 ]] && die "${FUNCNAME}: the ${VIRTUALX_COMMAND} failed."; return 0 }