Attachment 294709 Details for Bug 392995 – serial console bootup log

serial console bootup log

bootup.log (text/plain), 45.97 KB, created by Paul Osmialowski on 2011-12-04 12:54:47 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Paul Osmialowski

Created: 2011-12-04 12:54:47 UTC

Size: 45.97 KB

patch

obsolete

>=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.12.04 13:38:50 =~=~=~=~=~=~=~=~=~=~=~=
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Linux version 2.6.39-gentoo-r3 (root@oyster) (gcc version 4.4.5 (Gentoo 4.4.5 p1.2, pie-0.4.5) ) #1 SMP PREEMPT Wed Aug 10 20:34:28 CEST 2011
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
>[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fe86c00 (usable)
>[    0.000000]  BIOS-e820: 000000007fe86c00 - 000000007fe88c00 (ACPI NVS)
>[    0.000000]  BIOS-e820: 000000007fe88c00 - 000000007fe8ac00 (ACPI data)
>[    0.000000]  BIOS-e820: 000000007fe8ac00 - 0000000080000000 (reserved)
>[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
>[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
>[    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
>[    0.000000] DMI 2.3 present.
>[    0.000000] last_pfn = 0x7fe86 max_arch_pfn = 0x100000
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] found SMP MP-table at [c00fe710] fe710
>[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
>[    0.000000] ACPI: RSDP 000fec00 00014 (v00 DELL  )
>[    0.000000] ACPI: RSDT 000fcc05 00040 (v01 DELL    GX280   00000007 ASL  00000061)
>[    0.000000] ACPI: FACP 000fcc45 00074 (v01 DELL    GX280   00000007 ASL  00000061)
>[    0.000000] ACPI: DSDT fffd060c 030BF (v01   DELL    dt_ex 00001000 MSFT 0100000D)
>[    0.000000] ACPI: FACS 7fe86c00 00040
>[    0.000000] ACPI: SSDT fffd3808 000BA (v01   DELL    st_ex 00001000 MSFT 0100000D)
>[    0.000000] ACPI: APIC 000fccb9 00072 (v01 DELL    GX280   00000007 ASL  00000061)
>[    0.000000] ACPI: BOOT 000fcd2b 00028 (v01 DELL    GX280   00000007 ASL  00000061)
>[    0.000000] ACPI: ASF! 000fcd53 00067 (v16 DELL    GX280   00000007 ASL  00000061)
>[    0.000000] ACPI: MCFG 000fcdba 0003E (v01 DELL    GX280   00000007 ASL  00000061)
>[    0.000000] ACPI: HPET 000fcdf8 00038 (v01 DELL    GX280   00000007 ASL  00000061)
>[    0.000000] 1158MB HIGHMEM available.
>[    0.000000] 887MB LOWMEM available.
>[    0.000000]   mapped low ram: 0 - 377fe000
>[    0.000000]   low ram: 0 - 377fe000
>[    0.000000] Zone PFN ranges:
>[    0.000000]   DMA      0x00000010 -> 0x00001000
>[    0.000000]   Normal   0x00001000 -> 0x000377fe
>[    0.000000]   HighMem  0x000377fe -> 0x0007fe86
>[    0.000000] Movable zone start PFN for each node
>[    0.000000] early_node_map[2] active PFN ranges
>[    0.000000]     0: 0x00000010 -> 0x000000a0
>[    0.000000]     0: 0x00000100 -> 0x0007fe86
>[    0.000000] Using APIC driver default
>[    0.000000] ACPI: PM-Timer IO Port: 0x808
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] 4 Processors exceeds NR_CPUS limit of 2
>[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
>[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
>[    0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s28032 r0 d21120 u2097152
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519704
>[    0.000000] Kernel command line: root=/dev/hda9 vdso=0 console=ttyS0,115200
>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.000000] Initializing CPU#0
>[    0.000000] Initializing HighMem for node 0 (000377fe:0007fe86)
>[    0.000000] Memory: 2069088k/2095640k available (5366k kernel code, 26104k reserved, 2433k data, 420k init, 1186336k highmem)
>[    0.000000] virtual kernel memory layout:
>[    0.000000]     fixmap  : 0xfff8f000 - 0xfffff000   ( 448 kB)
>[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>[    0.000000]       .init : 0xc179e000 - 0xc1807000   ( 420 kB)
>[    0.000000]       .data : 0xc153da9b - 0xc179df00   (2433 kB)
>[    0.000000]       .text : 0xc1000000 - 0xc153da9b   (5366 kB)
>[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>[    0.000000] Preemptable hierarchical RCU implementation.
>[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
>[    0.000000] 	Verbose stalled-CPUs detection is disabled.
>[    0.000000] NR_IRQS:320
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [ttyS0] enabled
>[    0.000000] Fast TSC calibration using PIT
>[    0.000000] Detected 2992.360 MHz processor.
>[    0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.72 BogoMIPS (lpj=11969440)
>[    0.016005] pid_max: default: 32768 minimum: 301
>[    0.020055] Mount-cache hash table entries: 512
>[    0.024183] Initializing cgroup subsys net_cls
>[    0.028031] CPU: Physical Processor ID: 0
>[    0.032005] CPU: Processor Core ID: 0
>[    0.035650] mce: CPU supports 4 MCE banks
>[    0.036017] CPU0: Thermal monitoring enabled (TM1)
>[    0.040008] using mwait in idle threads.
>[    0.045137] ACPI: Core revision 20110316
>[    0.082344] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.084321] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.129720] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
>[    0.136007] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
>[    0.138621] ... version:                0
>[    0.140010] ... bit width:              40
>[    0.144010] ... generic registers:      18
>[    0.148010] ... value mask:             000000ffffffffff
>[    0.152010] ... max period:             0000007fffffffff
>[    0.156010] ... fixed-purpose events:   0
>[    0.160011] ... event mask:             000000000003ffff
>[    0.188031] Booting Node   0, Processors  #1 Ok.
>[    0.012000] Initializing CPU#1
>[    0.288035] Brought up 2 CPUs
>[    0.290990] Total of 2 processors activated (11969.81 BogoMIPS).
>[    0.293017] NET: Registered protocol family 16
>[    0.296441] ACPI: bus type pci registered
>[    0.300146] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.304047] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>[    0.308026] PCI: Using MMCONFIG for extended config space
>[    0.312027] PCI: Using configuration type 1 for base access
>[    0.329980] bio: create slab <bio-0> at 0
>[    0.351053] ACPI: Interpreter enabled
>[    0.352026] ACPI: (supports S0 S5)
>[    0.356570] ACPI: Using IOAPIC for interrupt routing
>[    0.402298] HEST: Table not found.
>[    0.404038] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>[    0.418129] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.431180] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0c00-0c7f
>[    0.436044] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 00e0-00ef
>[    0.452049] pci 0000:00:01.0: PCI bridge to [bus 01-01]
>[    0.456262] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>[    0.464041] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
>[    0.472095] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
>[    0.476601] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
>[    0.485334]  pci0000:00: Requesting ACPI _OSC control (0x1d)
>[    0.492034] Unable to assume _OSC PCIe control. Disabling ASPM
>[    0.772279] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>[    0.778926] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>[    0.782904] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
>[    0.790267] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>[    0.798683] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>[    0.806264] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>[    0.813452] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>[    0.820919] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>[    0.828295] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.832060] vgaarb: loaded
>[    0.834984] SCSI subsystem initialized
>[    0.836435] usbcore: registered new interface driver usbfs
>[    0.840114] usbcore: registered new interface driver hub
>[    0.844116] usbcore: registered new device driver usb
>[    0.848393] Advanced Linux Sound Architecture Driver Version 1.0.24.
>[    0.852111] PCI: Using ACPI for IRQ routing
>[    0.856423] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>[    0.860084] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>[    0.864956] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>[    0.876156] Switching to clocksource hpet
>[    0.884174] pnp: PnP ACPI init
>[    0.887223] ACPI: bus type pnp registered
>[    0.896057] system 00:01: [io  0x0800-0x085f] has been reserved
>[    0.902304] system 00:01: [io  0x0c00-0x0c7f] has been reserved
>[    0.908220] system 00:01: [io  0x0860-0x08ff] has been reserved
>[    0.937433] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
>[    0.944576] system 00:09: [mem 0x00100000-0x00ffffff] could not be reserved
>[    0.951521] system 00:09: [mem 0x01000000-0x7fe86bff] could not be reserved
>[    0.958470] system 00:09: [mem 0x000c0000-0x000fffff] could not be reserved
>[    0.965417] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
>[    0.972363] system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.978962] system 00:09: [mem 0xfed20000-0xfed9ffff] has been reserved
>[    0.985564] system 00:09: [mem 0xffb00000-0xffbfffff] has been reserved
>[    0.992163] system 00:09: [mem 0xffc00000-0xffffffff] has been reserved
>[    1.000480] system 00:0a: [io  0x0100-0x01fe] could not be reserved
>[    1.006740] system 00:0a: [io  0x0200-0x0277] has been reserved
>[    1.012647] system 00:0a: [io  0x0280-0x02e7] has been reserved
>[    1.018553] system 00:0a: [io  0x02f0-0x02f7] has been reserved
>[    1.024460] system 00:0a: [io  0x0300-0x0377] could not be reserved
>[    1.030710] system 00:0a: [io  0x0380-0x03bb] has been reserved
>[    1.036617] system 00:0a: [io  0x03c0-0x03e7] could not be reserved
>[    1.042868] system 00:0a: [io  0x03f6-0x03f7] could not be reserved
>[    1.049121] system 00:0a: [io  0x0400-0x04cf] has been reserved
>[    1.055027] system 00:0a: [io  0x04d2-0x057f] has been reserved
>[    1.060934] system 00:0a: [io  0x0580-0x0677] has been reserved
>[    1.066840] system 00:0a: [io  0x0680-0x0777] has been reserved
>[    1.072747] system 00:0a: [io  0x0780-0x07bb] has been reserved
>[    1.078652] system 00:0a: [io  0x07c0-0x07ff] has been reserved
>[    1.084559] system 00:0a: [io  0x08e0-0x08ff] has been reserved
>[    1.090464] system 00:0a: [io  0x0900-0x09fe] has been reserved
>[    1.096370] system 00:0a: [io  0x0a00-0x0afe] has been reserved
>[    1.102276] system 00:0a: [io  0x0b00-0x0bfe] has been reserved
>[    1.108180] system 00:0a: [io  0x0c80-0x0caf] has been reserved
>[    1.114089] system 00:0a: [io  0x0cc0-0x0cf7] has been reserved
>[    1.119995] system 00:0a: [io  0x0d00-0x0dfe] has been reserved
>[    1.125901] system 00:0a: [io  0x0e00-0x0efe] has been reserved
>[    1.131807] system 00:0a: [io  0x0f00-0x0ffe] has been reserved
>[    1.137712] system 00:0a: [io  0x2000-0x20fe] has been reserved
>[    1.143618] system 00:0a: [io  0x2100-0x21fe] has been reserved
>[    1.149522] system 00:0a: [io  0x2200-0x22fe] has been reserved
>[    1.155428] system 00:0a: [io  0x2300-0x23fe] has been reserved
>[    1.161332] system 00:0a: [io  0x2400-0x24fe] has been reserved
>[    1.167238] system 00:0a: [io  0x2500-0x25fe] has been reserved
>[    1.173142] system 00:0a: [io  0x2600-0x26fe] has been reserved
>[    1.179049] system 00:0a: [io  0x2700-0x27fe] has been reserved
>[    1.184953] system 00:0a: [io  0x2800-0x28fe] has been reserved
>[    1.190858] system 00:0a: [io  0x2900-0x29fe] has been reserved
>[    1.196763] system 00:0a: [io  0x2a00-0x2afe] has been reserved
>[    1.202669] system 00:0a: [io  0x2b00-0x2bfe] has been reserved
>[    1.208574] system 00:0a: [io  0x2c00-0x2cfe] has been reserved
>[    1.214480] system 00:0a: [io  0x2d00-0x2dfe] has been reserved
>[    1.220384] system 00:0a: [io  0x2e00-0x2efe] has been reserved
>[    1.226290] system 00:0a: [io  0x2f00-0x2ffe] has been reserved
>[    1.232197] system 00:0a: [io  0x5000-0x50fe] has been reserved
>[    1.238103] system 00:0a: [io  0x5100-0x51fe] has been reserved
>[    1.244013] system 00:0a: [io  0x5200-0x52fe] has been reserved
>[    1.249919] system 00:0a: [io  0x5300-0x53fe] has been reserved
>[    1.255826] system 00:0a: [io  0x5400-0x54fe] has been reserved
>[    1.261732] system 00:0a: [io  0x5500-0x55fe] has been reserved
>[    1.267638] system 00:0a: [io  0x5600-0x56fe] has been reserved
>[    1.273543] system 00:0a: [io  0x5700-0x57fe] has been reserved
>[    1.279449] system 00:0a: [io  0x5800-0x58fe] has been reserved
>[    1.285357] system 00:0a: [io  0x5900-0x59fe] has been reserved
>[    1.291263] system 00:0a: [io  0x5a00-0x5afe] has been reserved
>[    1.297168] system 00:0a: [io  0x5b00-0x5bfe] has been reserved
>[    1.303075] system 00:0a: [io  0x5c00-0x5cfe] has been reserved
>[    1.308980] system 00:0a: [io  0x5d00-0x5dfe] has been reserved
>[    1.314887] system 00:0a: [io  0x5e00-0x5efe] has been reserved
>[    1.320792] system 00:0a: [io  0x5f00-0x5ffe] has been reserved
>[    1.326699] system 00:0a: [io  0x6000-0x60fe] has been reserved
>[    1.332604] system 00:0a: [io  0x6100-0x61fe] has been reserved
>[    1.338511] system 00:0a: [io  0x6200-0x62fe] has been reserved
>[    1.344417] system 00:0a: [io  0x6300-0x63fe] has been reserved
>[    1.350324] system 00:0a: [io  0x6400-0x64fe] has been reserved
>[    1.356229] system 00:0a: [io  0x6500-0x65fe] has been reserved
>[    1.362134] system 00:0a: [io  0x6600-0x66fe] has been reserved
>[    1.368039] system 00:0a: [io  0x6700-0x67fe] has been reserved
>[    1.373948] system 00:0a: [io  0x6800-0x68fe] has been reserved
>[    1.379855] system 00:0a: [io  0x6900-0x69fe] has been reserved
>[    1.385761] system 00:0a: [io  0x6a00-0x6afe] has been reserved
>[    1.391668] system 00:0a: [io  0x6b00-0x6bfe] has been reserved
>[    1.397574] system 00:0a: [io  0x6c00-0x6cfe] has been reserved
>[    1.403479] system 00:0a: [io  0x6d00-0x6dfe] has been reserved
>[    1.409387] system 00:0a: [io  0x6e00-0x6efe] has been reserved
>[    1.415294] system 00:0a: [io  0x6f00-0x6ffe] has been reserved
>[    1.421200] system 00:0a: [io  0xa000-0xa0fe] has been reserved
>[    1.427107] system 00:0a: [io  0xa100-0xa1fe] has been reserved
>[    1.433015] system 00:0a: [io  0xa200-0xa2fe] has been reserved
>[    1.438922] system 00:0a: [io  0xa300-0xa3fe] has been reserved
>[    1.444827] system 00:0a: [io  0xa400-0xa4fe] has been reserved
>[    1.450735] system 00:0a: [io  0xa500-0xa5fe] has been reserved
>[    1.456641] system 00:0a: [io  0xa600-0xa6fe] has been reserved
>[    1.462549] system 00:0a: [io  0xa700-0xa7fe] has been reserved
>[    1.468455] system 00:0a: [io  0xa800-0xa8fe] has been reserved
>[    1.474362] system 00:0a: [io  0xa900-0xa9fe] has been reserved
>[    1.480269] system 00:0a: [io  0xaa00-0xaafe] has been reserved
>[    1.486177] system 00:0a: [io  0xab00-0xabfe] has been reserved
>[    1.492082] system 00:0a: [io  0xac00-0xacfe] has been reserved
>[    1.497990] system 00:0a: [io  0xad00-0xadfe] has been reserved
>[    1.503899] system 00:0a: [io  0xae00-0xaefe] has been reserved
>[    1.509805] system 00:0a: [io  0xaf00-0xaffe] has been reserved
>[    1.515713] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
>[    1.522310] system 00:0a: [mem 0xfeda0000-0xfedacfff] has been reserved
>[    1.529096] pnp: PnP ACPI: found 12 devices
>[    1.533271] ACPI: ACPI bus type pnp unregistered
>[    1.537880] PnPBIOS: Disabled by ACPI PNP
>[    1.576531] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref]
>[    1.584258] pci 0000:00:1c.0: BAR 7: assigned [io  0x1000-0x1fff]
>[    1.590338] pci 0000:00:01.0: PCI bridge to [bus 01-01]
>[    1.595552] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
>[    1.601634] pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdfefffff]
>[    1.608405] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff pref]
>[    1.615612] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
>[    1.620826] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
>[    1.626907] pci 0000:00:1c.0:   bridge window [mem 0xddf00000-0xddffffff]
>[    1.633682] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
>[    1.641409] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
>[    1.646621] pci 0000:00:1c.1:   bridge window [io  disabled]
>[    1.652269] pci 0000:00:1c.1:   bridge window [mem 0xdde00000-0xddefffff]
>[    1.659041] pci 0000:00:1c.1:   bridge window [mem pref disabled]
>[    1.665124] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
>[    1.670338] pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
>[    1.676419] pci 0000:00:1e.0:   bridge window [mem 0xddc00000-0xdddfffff]
>[    1.683191] pci 0000:00:1e.0:   bridge window [mem pref disabled]
>[    1.689284] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    1.695981] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    1.702680] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[    1.709457] NET: Registered protocol family 2
>[    1.713852] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>[    1.721093] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    1.728968] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>[    1.735843] TCP: Hash tables configured (established 131072 bind 65536)
>[    1.742441] TCP reno registered
>[    1.745578] UDP hash table entries: 512 (order: 2, 16384 bytes)
>[    1.751491] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>[    1.757951] NET: Registered protocol family 1
>[    1.762400] RPC: Registered udp transport module.
>[    1.767101] RPC: Registered tcp transport module.
>[    1.771793] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    1.778424] Simple Boot Flag value 0x87 read from CMOS RAM was invalid
>[    1.784941] Simple Boot Flag at 0x7a set to 0x1
>[    1.790369] microcode: CPU0 sig=0xf41, pf=0x10, revision=0xd
>[    1.796024] microcode: CPU1 sig=0xf41, pf=0x10, revision=0xd
>[    1.801726] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    1.810573] Intel AES-NI instructions are not detected.
>[    1.816261] highmem bounce pool size: 64 pages
>[    1.825579] DLM (built Aug 10 2011 20:15:25) installed
>[    1.830873] squashfs: version 4.0 (2009/01/31) Phillip Lougher
>[    1.837159] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
>[    1.844062] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    1.850765] SGI XFS with ACLs, security attributes, no debug enabled
>[    1.857907] msgmni has been set to 1724
>[    1.862336] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>[    1.869754] io scheduler noop registered
>[    1.873690] io scheduler deadline registered
>[    1.877972] io scheduler cfq registered (default)
>[    1.925626] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>ÿ[    2.208150] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    2.235317] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    2.241261] lp: driver loaded but no devices found
>[    2.246375] intel_rng: Firmware space is locked read-only. If you can't or
>[    2.246377] intel_rng: don't want to disable this in firmware setup, and if
>[    2.246378] intel_rng: you are certain that your system has a functional
>[    2.246380] intel_rng: RNG, try using the 'no_fwh_detect' option.
>[    2.272910] Linux agpgart interface v0.103
>[    2.277284] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
>[    2.285457] ACPI: Power Button [VBTN]
>[    2.289207] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>[    2.296593] ACPI: Power Button [PWRF]
>[    2.329184] ERST: Table is not found!
>[    2.332845] GHES: HEST is not enabled!
>[    2.336646] [drm] Initialized drm 1.1.0 20060810
>[    2.341581] parport_pc 00:07: reported by Plug and Play ACPI
>[    2.347276] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>[    2.452124] lp0: using parport0 (interrupt-driven).
>[    2.457723] Floppy drive(s): fd0 is 1.44M
>[    2.478148] FDC 0 is a post-1991 82077
>[    2.483131] brd: module loaded
>[    2.487302] loop: module loaded
>[    2.490504] Uniform Multi-Platform E-IDE driver
>[    2.495139] piix 0000:00:1f.1: IDE controller (0x8086:0x266f rev 0x03)
>[    2.501714] pci 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    2.508420] piix 0000:00:1f.1: IDE port disabled
>[    2.513032] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
>[    2.519903]     ide0: BM-DMA at 0xffa0-0xffa7
>[    2.788018] Refined TSC clocksource calibration: 2992.577 MHz.
>[    2.793839] Switching to clocksource tsc
>[    2.812207] hda: WDC WD3200BEVE-00A0HT0, ATA DISK drive
>[    3.488151] hda: UDMA/100 mode selected
>[    3.492057] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>[    3.496746] ide-gd driver 1.18
>[    3.499808] hda: max request size: 512KiB
>[    3.557983] hda: 625142448 sectors (320072 MB) w/8192KiB Cache, CHS=38913/255/63
>[    3.565487] hda: cache flushes supported
>[    3.655844]  hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 >
>[    3.668967] ide-cd driver 5.00
>[    3.672613] SCSI Media Changer driver v0.25 
>[    3.677050] osd: LOADED open-osd 0.2.0
>[    3.681021] sata_sil 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    3.688599] scsi0 : sata_sil
>[    3.691633] scsi1 : sata_sil
>[    3.694618] ata1: SATA max UDMA/100 mmio m512@0xddcfb600 tf 0xddcfb680 irq 16
>[    3.701739] ata2: SATA max UDMA/100 mmio m512@0xddcfb600 tf 0xddcfb6c0 irq 16
>[    3.709191] tun: Universal TUN/TAP device driver, 1.6
>[    3.714231] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>[    3.720503] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    3.727054] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[    3.734190] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>[    3.739405] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>[    3.746822] ehci_hcd 0000:00:1d.7: debug port 1
>[    3.755244] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
>[    3.776012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    3.781781] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    3.788548] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.795748] usb usb1: Product: EHCI Host Controller
>[    3.800610] usb usb1: Manufacturer: Linux 2.6.39-gentoo-r3 ehci_hcd
>[    3.806866] usb usb1: SerialNumber: 0000:00:1d.7
>[    3.811666] hub 1-0:1.0: USB hub found
>[    3.815408] hub 1-0:1.0: 8 ports detected
>[    3.819526] uhci_hcd: USB Universal Host Controller Interface driver
>[    3.825904] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>[    3.833033] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    3.838246] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    3.845626] uhci_hcd 0000:00:1d.0: detected 2 ports
>[    3.850518] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
>[    3.856295] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    3.863062] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.870263] usb usb2: Product: UHCI Host Controller
>[    3.875127] usb usb2: Manufacturer: Linux 2.6.39-gentoo-r3 uhci_hcd
>[    3.881376] usb usb2: SerialNumber: 0000:00:1d.0
>[    3.886168] hub 2-0:1.0: USB hub found
>[    3.889910] hub 2-0:1.0: 2 ports detected
>[    3.893976] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
>[    3.901103] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    3.906316] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>[    3.913696] uhci_hcd 0000:00:1d.1: detected 2 ports
>[    3.918657] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
>[    3.924433] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    3.931200] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.938399] usb usb3: Product: UHCI Host Controller
>[    3.943261] usb usb3: Manufacturer: Linux 2.6.39-gentoo-r3 uhci_hcd
>[    3.949509] usb usb3: SerialNumber: 0000:00:1d.1
>[    3.954300] hub 3-0:1.0: USB hub found
>[    3.958042] hub 3-0:1.0: 2 ports detected
>[    3.962107] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[    3.969235] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    3.974451] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>[    3.981829] uhci_hcd 0000:00:1d.2: detected 2 ports
>[    3.986727] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
>[    3.992528] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    3.999296] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    4.006499] usb usb4: Product: UHCI Host Controller
>[    4.011361] usb usb4: Manufacturer: Linux 2.6.39-gentoo-r3 uhci_hcd
>[    4.017625] usb usb4: SerialNumber: 0000:00:1d.2
>[    4.022408] hub 4-0:1.0: USB hub found
>[    4.026152] hub 4-0:1.0: 2 ports detected
>[    4.030168] ata1: SATA link down (SStatus 0 SControl 310)
>[    4.035628] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
>[    4.042755] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>[    4.047973] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>[    4.055352] uhci_hcd 0000:00:1d.3: detected 2 ports
>[    4.060253] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
>[    4.066031] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    4.072799] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    4.080011] usb usb5: Product: UHCI Host Controller
>[    4.084877] usb usb5: Manufacturer: Linux 2.6.39-gentoo-r3 uhci_hcd
>[    4.091125] usb usb5: SerialNumber: 0000:00:1d.3
>[    4.095932] hub 5-0:1.0: USB hub found
>[    4.099674] hub 5-0:1.0: 2 ports detected
>[    4.103846] usbcore: registered new interface driver usblp
>[    4.109322] Initializing USB Mass Storage driver...
>[    4.114258] usbcore: registered new interface driver usb-storage
>[    4.120269] USB Mass Storage support registered.
>[    4.124942] usbcore: registered new interface driver libusual
>[    4.130888] i8042: PNP: No PS/2 controller found. Probing ports directly.
>[    4.140558] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    4.145559] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    4.150829] mousedev: PS/2 mouse device common for all mice
>[    4.156876] input: PC Speaker as /devices/platform/pcspkr/input/input2
>[    4.163542] rtc_cmos 00:05: RTC can wake from S4
>[    4.168305] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>[    4.174406] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
>[    4.180627] i2c /dev entries driver
>[    4.184403] Linux video capture interface: v2.00
>[    4.189188] m2m-testdev m2m-testdev.0: mem2mem-testdevDevice registered as /dev/video0
>[    4.197094] usb 1-4: new high speed USB device number 3 using ehci_hcd
>[    4.203714] usbcore: registered new interface driver uvcvideo
>[    4.209459] USB Video Class driver (v1.0.0)
>[    4.213685] coretemp: CPU (model=0x4) has no thermal sensor
>[    4.219254] coretemp: CPU (model=0x4) has no thermal sensor
>[    4.225112] cpuidle: using governor ladder
>[    4.229805] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>[    4.238101] usbcore: registered new interface driver usbhid
>[    4.243674] usbhid: USB HID core driver
>[    4.247970] EMU10K1_Audigy 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[    4.287467] ALSA device list:
>[    4.290434]   #0: SB Audigy 1 [SB0092] (rev.3, serial:0x531102) at 0xcce0, irq 17
>[    4.297940] GACT probability on
>[    4.301075] Mirror/redirect action on
>[    4.304797] Simple TC action Loaded
>[    4.308508] netem: version 1.3
>[    4.311549] u32 classifier
>[    4.314270]     Performance counters on
>[    4.318094]     input device check on
>[    4.321755]     Actions configured
>[    4.325170] Netfilter messages via NETLINK v0.30.
>[    4.329886] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[    4.336168] ctnetlink v0.93: registering with nfnetlink.
>[    4.341607] xt_time: kernel timezone is -0000
>[    4.345961] IPv4 over IPv4 tunneling driver
>[    4.350439] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    4.352055] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>[    4.361965] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
>[    4.368339] ata2.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7
>[    4.368371] arp_tables: (C) 2002 David S. Miller
>[    4.368396] TCP cubic registered
>[    4.368398] Initializing XFRM netlink socket
>[    4.372361] NET: Registered protocol family 10
>[    4.372909] Mobile IPv6
>[    4.372925] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[    4.372989] IPv6 over IPv4 tunneling driver
>[    4.373623] NET: Registered protocol family 17
>[    4.373635] NET: Registered protocol family 15
>[    4.373676] Bridge firewalling registered
>[    4.373681] Ebtables v2.0 registered
>[    4.374375] sctp: Hash tables configured (established 65536 bind 65536)
>[    4.374507] Registering the dns_resolver key type
>[    4.374593] ondemand governor failed, too long transition latency of HW, fallback to performance governor
>[    4.374706] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
>[    4.374715] Using IPI No-Shortcut mode
>[    4.450826] rtc_cmos 00:05: setting system clock to 2011-12-04 13:38:55 UTC (1323005935)
>[    4.450877] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>[    4.492332] ata2.00: configured for UDMA/100
>[    4.497063] usb 1-4: New USB device found, idVendor=057b, idProduct=0020
>[    4.503745] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    4.510864] usb 1-4: Product: Silicon Media R/W
>[    4.515385] usb 1-4: Manufacturer: Y-E DATA
>[    4.516137] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
>[    4.516456] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>[    4.516533] sd 1:0:0:0: [sda] Write Protect is off
>[    4.516572] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    4.517142] sd 1:0:0:0: Attached scsi generic sg0 type 0
>[    4.554175] usb 1-4: SerialNumber: 000000320F80
>[    4.559077] scsi2 : usb-storage 1-4:1.0
>[    4.627845]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
>[    4.635988] sd 1:0:0:0: [sda] Attached SCSI disk
>[    4.736948] UDF-fs: No partition found (1)
>[    4.774135] XFS (hda9): Mounting Filesystem
>[    4.856016] usb 2-2: new low speed USB device number 2 using uhci_hcd
>[    4.980167] XFS (hda9): Ending clean mount
>[    4.984279] VFS: Mounted root (xfs filesystem) readonly on device 3:9.
>[    4.990842] Freeing unused kernel memory: 420k freed
>[    4.996016] Write protecting the kernel text: 5368k
>[    5.000920] Write protecting the kernel read-only data: 2080k
>[    5.046288] usb 2-2: New USB device found, idVendor=413c, idProduct=2003
>[    5.052978] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    5.060097] usb 2-2: Product: Dell USB Keyboard
>[    5.064635] usb 2-2: Manufacturer: Dell
>[    5.203057] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3
>[    5.213457] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-2/input0
>[    5.464024] usb 5-2: new low speed USB device number 2 using uhci_hcd
>
INIT: version 2.88 booting

>[    5.570340] scsi 2:0:0:0: Direct-Access     Y-E DATA USB   HS-CF Card 4.08 PQ: 0 ANSI: 0
>[    5.582860] sd 2:0:0:0: Attached scsi generic sg1 type 0
>[    5.589607] sd 2:0:0:0: [sdb] Attached SCSI removable disk
>[    5.598842] scsi 2:0:0:1: Direct-Access     Y-E DATA USB   HS-xD/SM   4.08 PQ: 0 ANSI: 0
>[    5.611349] sd 2:0:0:1: Attached scsi generic sg2 type 0
>[    5.618857] sd 2:0:0:1: [sdc] Attached SCSI removable disk
>[    5.628172] scsi 2:0:0:2: Direct-Access     Y-E DATA USB   HS-MS Card 4.08 PQ: 0 ANSI: 0
>[    5.638730] sd 2:0:0:2: Attached scsi generic sg3 type 0
>[    5.652350] scsi 2:0:0:3: Direct-Access     Y-E DATA USB   HS-SD Card 4.08 PQ: 0 ANSI: 0
>[    5.660574] sd 2:0:0:2: [sdd] Attached SCSI removable disk
>[    5.663040] usb 5-2: New USB device found, idVendor=046d, idProduct=c043
>[    5.663044] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    5.663048] usb 5-2: Product: USB-PS/2 Optical Mouse
>[    5.663051] usb 5-2: Manufacturer: Logitech
>[    5.671447] sd 2:0:0:3: Attached scsi generic sg4 type 0
>[    5.689518] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input4
>[    5.689703] sd 2:0:0:3: [sde] Attached SCSI removable disk
>[    5.697580] generic-usb 0003:046D:C043.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.3-2/input0
>%G
>   [1m[32mOpenRC [1m[36m0.9.4[0m is starting up [1m[34mGentoo Linux (i686)[0m
>
> [1m[32m*[0m Mounting /proc[K ...
> [ ok ]
> [1m[33m*[0m WARNING: rc_sys not defined in rc.conf. Falling back to automatic detection[K
> [1m[32m*[0m Mounting /sys[K ...
> [ ok ]
> [1m[32m*[0m Mounting debug filesystem[K ...
> [ ok ]
> [1m[32m*[0m Mounting /dev[K ...
> [ ok ]
> [1m[32m*[0m Starting udevd[K ...
> [1m[31m*[0m start-stop-daemon: pam error: Module is unknown[K
> [1m[31m*[0m start-stop-daemon: failed to start `/sbin/udevd'[K
> [ !! ]
> [1m[31m*[0m start-stop-daemon: no matching processes found[K
> [1m[31m*[0m ERROR: udev failed to start[K
> [1m[32m*[0m Mounting /dev/pts[K ...
> [ ok ]
> [1m[32m*[0m Mounting /dev/shm[K ...
> [ ok ]
> [1m[32m*[0m Setting system clock using the hardware clock [Local Time][K ...
> [ ok ]
> [1m[32m*[0m Autoloaded 0 module(s)[K
> [1m[32m*[0m Checking local filesystems [K ...
>/sbin/fsck.xfs: /dev/hda9 does not exist
> [1m[33m*[0m Operational error[K
> [ !! ]
> [1m[32m*[0m Remounting root filesystem read/write[K ...
> [ ok ]
> [1m[32m*[0m Updating /etc/mtab[K ...
> [ ok ]
> [1m[32m*[0m Mounting local filesystems[K ...
>mount: special device /dev/hda1 does not exist
>mount: special device /dev/hda3 does not exist
>mount: special device /dev/hda5 does not exist
>mount: special device /dev/hda6 does not exist
>mount: special device /dev/hda7 does not exist
>mount: special device /dev/hda8 does not exist
>mount: special device /dev/sda10 does not exist
> [1m[31m*[0m Some local filesystem failed to mount[K
> [ !! ]
> [1m[32m*[0m Starting acpid[K ...
> [1m[31m*[0m start-stop-daemon: /usr/sbin/acpid does not exist[K
> [1m[31m*[0m Failed to start acpid[K
> [ !! ]
> [1m[31m*[0m ERROR: acpid failed to start[K
> [1m[32m*[0m Configuring kernel parameters[K ...
> [ ok ]
> [1m[32m*[0m Creating user login records[K ...
> [ ok ]
> [1m[32m*[0m Cleaning /var/run[K ...
>/etc/init.d/bootmisc: line 76: find: command not found
> [ ok ]
> [1m[32m*[0m Wiping /tmp directory[K ...
>/etc/init.d/bootmisc: line 47: find: command not found
> [ ok ]
> [1m[33m*[0m Use of the opts variable is deprecated and will be[K
> [1m[33m*[0m removed in the future.[K
> [1m[33m*[0m Please use extra_commands or extra_started_commands.[K
> [1m[32m*[0m Loading ALSA modules[K ...
>WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
> [ ok ]
> [1m[32m*[0m Restoring Mixer Levels[K ...
> [1m[33m*[0m No mixer config in /var/lib/alsa/asound.state, you have to unmute your card![K
> [ ok ]
> [1m[32m*[0m Setting terminal encoding [UTF-8][K ...
> [ ok ]
> [1m[32m*[0m Setting console font [default8x16][K ...
>/etc/init.d/consolefont: line 48: setfont: command not found
> [ !! ]
> [1m[31m*[0m ERROR: consolefont failed to start[K
> [1m[32m*[0m Setting hostname to oyster[K ...
> [ ok ]
> [1m[32m*[0m Setting keyboard mode [UTF-8][K ...
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
> [ ok ]
> [1m[32m*[0m Loading key mappings [pl][K ...
>/etc/init.d/keymaps: line 55: loadkeys: command not found
> [1m[31m*[0m Error loading key mappings[K
> [ !! ]
> [1m[31m*[0m ERROR: keymaps failed to start[K
> [1m[32m*[0m Bringing up interface lo[K
> [1m[32m*[0m   127.0.0.1/8[K ...
> [ ok ]
> [1m[32m*[0m   Adding routes[K
> [1m[32m*[0m     127.0.0.0/8 via 127.0.0.1[K ...
> [ ok ]
> [1m[32m*[0m   Running postup[K ...
> [1m[32m*[0m Mounting misc binary format filesystem[K ...
> [ ok ]
> [1m[32m*[0m Loading custom binary format handlers[K ...
> [ ok ]
> [1m[32m*[0m Activating swap devices[K ...
>swapon: /dev/hda2: stat failed: No such file or directory
> [ ok ]
> [1m[32m*[0m Starting udevd[K ...
> [1m[31m*[0m start-stop-daemon: pam error: Module is unknown[K
> [1m[31m*[0m start-stop-daemon: failed to start `/sbin/udevd'[K
> [ !! ]
> [1m[31m*[0m start-stop-daemon: no matching processes found[K
> [1m[31m*[0m ERROR: udev failed to start[K
> [1m[31m*[0m 
INIT: Entering runlevel: 3

> [1m[33m*[0m Use of the opts variable is deprecated and will be[K
> [1m[33m*[0m removed in the future.[K
> [1m[33m*[0m Please use extra_commands or extra_started_commands.[K
> [1m[32m*[0m sysklogd -> start: syslogd[K ...
> [1m[31m*[0m start-stop-daemon: /usr/sbin/syslogd does not exist[K
> [1m[31m*[0m Failed to start syslogd[K
> [ !! ]
> [1m[31m*[0m ERROR: sysklogd failed to start[K
> [1m[32m*[0m Starting acpid[K ...
> [1m[31m*[0m start-stop-daemon: /usr/sbin/acpid does not exist[K
> [1m[31m*[0m Failed to start acpid[K
> [ !! ]
> [1m[31m*[0m ERROR: acpid failed to start[K
> [1m[32m*[0m Starting D-BUS system messagebus[K ...
>/etc/init.d/dbus: line 16: /usr/bin/dbus-uuidgen: No such file or directory
> [1m[31m*[0m start-stop-daemon: /usr/bin/dbus-daemon does not exist[K
> [ !! ]
> [1m[31m*[0m ERROR: dbus failed to start[K
> [1m[31m*[0m ERROR: cannot start consolekit as dbus would not start[K
> [1m[32m*[0m Setting console font [default8x16][K ...
>/etc/init.d/consolefont: line 48: setfont: command not found
> [ !! ]
> [1m[31m*[0m ERROR: consolefont failed to start[K
> [1m[32m*[0m Bringing up interface eth0[K
> [1m[31m*[0m   ERROR: interface eth0 does not exist[K
> [1m[31m*[0m   Ensure that you have loaded the correct kernel module for your hardware[K
> [1m[31m*[0m ERROR: net.eth0 failed to start[K
> [1m[31m*[0m ERROR: cannot start netmount as net.eth0 would not start[K
> [1m[32m*[0m Starting gpm[K ...
> [1m[31m*[0m start-stop-daemon: /usr/sbin/gpm does not exist[K
> [ !! ]
> [1m[31m*[0m ERROR: gpm failed to start[K
>/etc/init.d/xdm: line 69: which: command not found
>ERROR: Please set your DISPLAYMANAGER variable in /etc/conf.d/xdm,
>	or install x11-apps/xdm package
> [ !! ]
> [1m[32m*[0m Setting up xdm[K ...
>/etc/profile: line 38: warning: setlocale: LC_ALL: cannot change locale (pl_PL.UTF-8): No such file or directory
> [1m[31m*[0m start-stop-daemon: /usr/bin/xdm does not exist[K
> [1m[31m*[0m ERROR: could not start the Display Manager[K
> [ ok ]
> [1m[32m*[0m Running anacron[K ...
> [ !! ]
> [1m[31m*[0m ERROR: anacron failed to start[K
> [1m[31m*[0m ERROR: cannot start bluetooth as dbus would not start[K
> [1m[33m*[0m Use of the opts variable is deprecated and will be[K
> [1m[33m*[0m removed in the future.[K
> [1m[33m*[0m Please use extra_commands or extra_started_commands.[K
>touch: cannot touch `/var/log/clamav/clamd.log': No such file or directory
>chown: cannot access `/var/log/clamav/clamd.log': No such file or directory
>chmod: cannot access `/var/log/clamav/clamd.log': No such file or directory
>touch: cannot touch `/var/log/clamav/freshclam.log': No such file or directory
>chown: cannot access `/var/log/clamav/freshclam.log': No such file or directory
>chmod: cannot access `/var/log/clamav/freshclam.log': No such file or directory
> [1m[32m*[0m Starting clamd[K ...
> [1m[31m*[0m start-stop-daemon: /usr/sbin/clamd does not exist[K
> [1m[31m*[0m Failed to start clamd[K
> [ !! ]
> [1m[32m*[0m Starting freshclam[K ...
> [1m[31m*[0m start-stop-daemon: /usr/bin/freshclam does not exist[K
> [ ok ]
> [1m[32m*[0m Virus databases are already up to date.[K
> [1m[31m*[0m ERROR: cannot start cupsd as dbus would not start[K
> [1m[31m*[0m ERROR: cannot start hddtemp as net.eth0 would not start[K
> [1m[32m*[0m Setting keyboard mode [UTF-8][K ...
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
>/etc/init.d/keymaps: line 49: kbd_mode: command not found
> [ ok ]
> [1m[32m*[0m Loading key mappings [pl][K ...
>/etc/init.d/keymaps: line 55: loadkeys: command not found
> [1m[31m*[0m Error loading key mappings[K
> [ !! ]
> [1m[31m*[0m ERROR: keymaps failed to start[K
>/etc/init.d/nscd: line 15: stat: command not found
>
> [1m[33m*[0m nscd run dir is not world readable, you should reset the perms:[K
> [1m[33m*[0m chmod 755 /var/run/nscd[K
> [1m[33m*[0m chmod a+rw /var/run/nscd/socket[K
>
> [1m[33m*[0m To disable this warning, set 'NSCD_PERMS_OK' in /etc/conf.d/nscd[K
>
> [1m[32m*[0m Starting Name Service Cache Daemon[K ...
> [1m[31m*[0m start-stop-daemon: /usr/sbin/nscd does not exist[K
> [ !! ]
> [1m[31m*[0m ERROR: nscd failed to start[K
> [1m[31m*[0m scratchbox init script not found. Aborting[K
> [ !! ]
> [1m[31m*[0m ERROR: scratchbox failed to start[K
> [1m[33m*[0m Use of the opts variable is deprecated and will be[K
> [1m[33m*[0m removed in the future.[K
> [1m[33m*[0m Please use extra_commands or extra_started_commands.[K
> [1m[32m*[0m Starting S.M.A.R.T. monitoring daemon[K ...
> [1m[31m*[0m start-stop-daemon: /usr/sbin/smartd does not exist[K
> [ !! ]
> [1m[31m*[0m ERROR: smartd failed to start[K
> [1m[31m*[0m ERROR: cannot start sshd as net.eth0 would not start[K
> [1m[32m*[0m Writing a dummy startup record using sadc (see sadc(8))...[K ...
>/etc/init.d/sysstat: line 12: /usr/lib/sa/sadc: No such file or directory
> [ !! ]
> [1m[31m*[0m ERROR: sysstat failed to start[K
> [1m[32m*[0m Starting TiMidity++ Virtual Midi Sequencer[K ...
> [1m[33m*[0m WARNING: -c/--chuid is deprecated and will be removed in the future, please use -u/--user instead[K
> [1m[31m*[0m start-stop-daemon: /usr/bin/timidity does not exist[K
> [ !! ]
> [1m[31m*[0m ERROR: timidity failed to start[K
> [1m[32m*[0m Doing udev cleanups[K
> [1m[31m*[0m ERROR: urandom failed to start[K
> [1m[32m*[0m Starting vixie-cron[K ...
> [1m[31m*[0m start-stop-daemon: /usr/sbin/cron does not exist[K
> [ !! ]
> [1m[31m*[0m ERROR: vixie-cron failed to start[K
> [1m[33m*[0m Use of the opts variable is deprecated and will be[K
> [1m[33m*[0m removed in the future.[K
> [1m[33m*[0m Please use extra_commands or extra_started_commands.[K
> [1m[32m*[0m Starting xinetd[K ...
> [1m[31m*[0m start-stop-daemon: /usr/sbin/xinetd does not exist[K
> [ !! ]
> [1m[31m*[0m ERROR: xinetd failed to start[K
> [1m[32m*[0m Starting local[K
>My own settings:
>:syncookies
>:qos
>Cannot find device "eth0"
>:friskyidentd
>/etc/local.d/baselayout1.start: line 14: /usr/local/sbin/friskyidentd: No such file or directory
>:date/time
>/etc/local.d/baselayout1.start: line 16: ntpdate: command not found
>:dvd
>:FINISH:
> [ ok ]
> [1m[32m*[0m Starting udevd[K ...
> [1m[31m*[0m start-stop-daemon: pam error: Module is unknown[K
> [1m[31m*[0m start-stop-daemon: failed to start `/sbin/udevd'[K
> [ !! ]
> [1m[31m*[0m start-stop-daemon: no matching processes found[K
> [1m[31m*[0m ERROR: udev failed to start[K
>

Actions: View

Attachments on bug 392995: 294709 | 294711