[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.36-gentoo-r3 (root@sevendust) (gcc version 4.4.4 (Gentoo 4.4.4-r2 p1.2, pie-0.4.5) ) #5 SMP Sun Nov 28 20:40:41 CET 2010 [ 0.000000] Command line: dolvm dokeymap keymap=de crypt_root=/dev/sda2 real_root=/dev/gentoo/root [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable) [ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d6000 - 00000000000d8000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000009d6a1000 (usable) [ 0.000000] BIOS-e820: 000000009d6a1000 - 000000009d6a7000 (reserved) [ 0.000000] BIOS-e820: 000000009d6a7000 - 000000009d7b7000 (usable) [ 0.000000] BIOS-e820: 000000009d7b7000 - 000000009d80f000 (reserved) [ 0.000000] BIOS-e820: 000000009d80f000 - 000000009d8c7000 (usable) [ 0.000000] BIOS-e820: 000000009d8c7000 - 000000009d8d2000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000009d8d2000 - 000000009d8d5000 (ACPI data) [ 0.000000] BIOS-e820: 000000009d8d5000 - 000000009d8d9000 (reserved) [ 0.000000] BIOS-e820: 000000009d8d9000 - 000000009d8dd000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000009d8dd000 - 000000009d8e0000 (reserved) [ 0.000000] BIOS-e820: 000000009d8e0000 - 000000009d907000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000009d907000 - 000000009d908000 (ACPI data) [ 0.000000] BIOS-e820: 000000009d908000 - 000000009db0f000 (reserved) [ 0.000000] BIOS-e820: 000000009db0f000 - 000000009db9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000009db9f000 - 000000009dbff000 (ACPI data) [ 0.000000] BIOS-e820: 000000009dbff000 - 000000009dc00000 (usable) [ 0.000000] BIOS-e820: 000000009dc00000 - 00000000a0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000015c000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x15c000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D7FFF write-protect [ 0.000000] D8000-DBFFF uncachable [ 0.000000] DC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 15C000000 mask FFC000000 uncachable [ 0.000000] 1 base 09E000000 mask FFE000000 uncachable [ 0.000000] 2 base 000000000 mask F80000000 write-back [ 0.000000] 3 base 080000000 mask FE0000000 write-back [ 0.000000] 4 base 100000000 mask FC0000000 write-back [ 0.000000] 5 base 140000000 mask FE0000000 write-back [ 0.000000] 6 base 09DE00000 mask FFFE00000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 000000009de00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x9dc00 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009ac00 (usable) [ 0.000000] modified: 000000000009ac00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d6000 - 00000000000d8000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000009d6a1000 (usable) [ 0.000000] modified: 000000009d6a1000 - 000000009d6a7000 (reserved) [ 0.000000] modified: 000000009d6a7000 - 000000009d7b7000 (usable) [ 0.000000] modified: 000000009d7b7000 - 000000009d80f000 (reserved) [ 0.000000] modified: 000000009d80f000 - 000000009d8c7000 (usable) [ 0.000000] modified: 000000009d8c7000 - 000000009d8d2000 (ACPI NVS) [ 0.000000] modified: 000000009d8d2000 - 000000009d8d5000 (ACPI data) [ 0.000000] modified: 000000009d8d5000 - 000000009d8d9000 (reserved) [ 0.000000] modified: 000000009d8d9000 - 000000009d8dd000 (ACPI NVS) [ 0.000000] modified: 000000009d8dd000 - 000000009d8e0000 (reserved) [ 0.000000] modified: 000000009d8e0000 - 000000009d907000 (ACPI NVS) [ 0.000000] modified: 000000009d907000 - 000000009d908000 (ACPI data) [ 0.000000] modified: 000000009d908000 - 000000009db0f000 (reserved) [ 0.000000] modified: 000000009db0f000 - 000000009db9f000 (ACPI NVS) [ 0.000000] modified: 000000009db9f000 - 000000009dbff000 (ACPI data) [ 0.000000] modified: 000000009dbff000 - 000000009dc00000 (usable) [ 0.000000] modified: 000000009dc00000 - 00000000a0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 000000015c000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff8800000f6480] f6480 [ 0.000000] init_memory_mapping: 0000000000000000-000000009dc00000 [ 0.000000] 0000000000 - 009dc00000 page 2M [ 0.000000] kernel direct mapping tables up to 9dc00000 @ 16000-1a000 [ 0.000000] init_memory_mapping: 0000000100000000-000000015c000000 [ 0.000000] 0100000000 - 015c000000 page 2M [ 0.000000] kernel direct mapping tables up to 15c000000 @ 18000-1f000 [ 0.000000] RAMDISK: 37dbd000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000f6440 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 000000009db49b5a 00094 (v01 LENOVO TP-7U 00003190 LTP 00000000) [ 0.000000] ACPI: FACP 000000009db49d00 000F4 (v03 LENOVO TP-7U 00003190 LNVO 00000001) [ 0.000000] ACPI: DSDT 000000009db4a10e 0FAE1 (v01 LENOVO TP-7U 00003190 MSFT 03000000) [ 0.000000] ACPI: FACS 000000009db8e000 00040 [ 0.000000] ACPI: SSDT 000000009db49eb4 0025A (v01 LENOVO TP-7U 00003190 MSFT 03000000) [ 0.000000] ACPI: ECDT 000000009db59bef 00052 (v01 LENOVO TP-7U 00003190 LNVO 00000001) [ 0.000000] ACPI: APIC 000000009db59c41 00078 (v01 LENOVO TP-7U 00003190 LNVO 00000001) [ 0.000000] ACPI: MCFG 000000009db59cb9 0003C (v01 LENOVO TP-7U 00003190 LNVO 00000001) [ 0.000000] ACPI: HPET 000000009db59cf5 00038 (v01 LENOVO TP-7U 00003190 LNVO 00000001) [ 0.000000] ACPI: SLIC 000000009db59dc2 00176 (v01 LENOVO TP-7U 00003190 LTP 00000000) [ 0.000000] ACPI: BOOT 000000009db59f38 00028 (v01 LENOVO TP-7U 00003190 LTP 00000001) [ 0.000000] ACPI: ASF! 000000009db59f60 000A0 (v16 LENOVO TP-7U 00003190 PTL 00000001) [ 0.000000] ACPI: SSDT 000000009db8d1fa 00568 (v01 LENOVO TP-7U 00003190 INTL 20050513) [ 0.000000] ACPI: TCPA 000000009d907000 00032 (v00 00000000 00000000) [ 0.000000] ACPI: SSDT 000000009d8d4000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 000000009d8d3000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 000000009d8d2000 00242 (v01 PmRef ApTst 00003000 INTL 20050624) [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T400 [ 0.000000] ACPI: Added _OSI(Linux) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000015c000000 [ 0.000000] Initmem setup node 0 0000000000000000-000000015c000000 [ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff] [ 0.000000] [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880100200000-ffff880103bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0015c000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009a [ 0.000000] 0: 0x00000100 -> 0x0009d6a1 [ 0.000000] 0: 0x0009d6a7 -> 0x0009d7b7 [ 0.000000] 0: 0x0009d80f -> 0x0009d8c7 [ 0.000000] 0: 0x0009dbff -> 0x0009dc00 [ 0.000000] 0: 0x00100000 -> 0x0015c000 [ 0.000000] On node 0 totalpages: 1021940 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 626850 pages, LIFO batch:31 [ 0.000000] Normal zone: 5152 pages used for memmap [ 0.000000] Normal zone: 371680 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] early_res array is doubled to 64 at [1a000 - 1a7ff] [ 0.000000] early_res array is doubled to 128 at [1a800 - 1b7ff] [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000 [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d6000 [ 0.000000] PM: Registered nosave memory: 00000000000d6000 - 00000000000d8000 [ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000009d6a1000 - 000000009d6a7000 [ 0.000000] PM: Registered nosave memory: 000000009d7b7000 - 000000009d80f000 [ 0.000000] PM: Registered nosave memory: 000000009d8c7000 - 000000009d8d2000 [ 0.000000] PM: Registered nosave memory: 000000009d8d2000 - 000000009d8d5000 [ 0.000000] PM: Registered nosave memory: 000000009d8d5000 - 000000009d8d9000 [ 0.000000] PM: Registered nosave memory: 000000009d8d9000 - 000000009d8dd000 [ 0.000000] PM: Registered nosave memory: 000000009d8dd000 - 000000009d8e0000 [ 0.000000] PM: Registered nosave memory: 000000009d8e0000 - 000000009d907000 [ 0.000000] PM: Registered nosave memory: 000000009d907000 - 000000009d908000 [ 0.000000] PM: Registered nosave memory: 000000009d908000 - 000000009db0f000 [ 0.000000] PM: Registered nosave memory: 000000009db0f000 - 000000009db9f000 [ 0.000000] PM: Registered nosave memory: 000000009db9f000 - 000000009dbff000 [ 0.000000] PM: Registered nosave memory: 000000009dc00000 - 00000000a0000000 [ 0.000000] PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000 [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000 [ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at a0000000 (gap: a0000000:40000000) [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880002000000 s80832 r8192 d21568 u524288 [ 0.000000] pcpu-alloc: s80832 r8192 d21568 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1002452 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: dolvm dokeymap keymap=de crypt_root=/dev/sda2 real_root=/dev/gentoo/root [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Subtract (82 early reservations) [ 0.000000] #1 [0001000000 - 0001e470b0] TEXT DATA BSS [ 0.000000] #2 [0037dbd000 - 0037ff0000] RAMDISK [ 0.000000] #3 [0001e48000 - 0001e4814c] BRK [ 0.000000] #4 [00000f6490 - 0000100000] BIOS reserved [ 0.000000] #5 [00000f6480 - 00000f6490] MP-table mpf [ 0.000000] #6 [000009ac00 - 000009b171] BIOS reserved [ 0.000000] #7 [000009b28d - 00000f6480] BIOS reserved [ 0.000000] #8 [000009b171 - 000009b28d] MP-table mpc [ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE [ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP [ 0.000000] #11 [0000016000 - 0000018000] PGTABLE [ 0.000000] #12 [0000018000 - 000001a000] PGTABLE [ 0.000000] #13 [0100000000 - 0100005000] NODE_DATA [ 0.000000] #14 [0001e48180 - 0001e49180] BOOTMEM [ 0.000000] #15 [0001e470c0 - 0001e473c0] BOOTMEM [ 0.000000] #16 [0100005000 - 0100006000] BOOTMEM [ 0.000000] #17 [0100006000 - 0100007000] BOOTMEM [ 0.000000] #18 [0100200000 - 0103c00000] MEMMAP 0 [ 0.000000] #19 [0001e473c0 - 0001e47540] BOOTMEM [ 0.000000] #20 [0001e49180 - 0001e61180] BOOTMEM [ 0.000000] #21 [0001e61180 - 0001e6d180] BOOTMEM [ 0.000000] #22 [0001e6e000 - 0001e6f000] BOOTMEM [ 0.000000] #23 [0001e47540 - 0001e47581] BOOTMEM [ 0.000000] #24 [0001e475c0 - 0001e47603] BOOTMEM [ 0.000000] #25 [0001e47640 - 0001e47d08] BOOTMEM [ 0.000000] #26 [0001e47d40 - 0001e47da8] BOOTMEM [ 0.000000] #27 [0001e47dc0 - 0001e47e28] BOOTMEM [ 0.000000] #28 [0001e47e40 - 0001e47ea8] BOOTMEM [ 0.000000] #29 [0001e47ec0 - 0001e47f28] BOOTMEM [ 0.000000] #30 [0001e47f40 - 0001e47fa8] BOOTMEM [ 0.000000] #31 [0001e6d180 - 0001e6d1e8] BOOTMEM [ 0.000000] #32 [0001e6d200 - 0001e6d268] BOOTMEM [ 0.000000] #33 [0001e6d280 - 0001e6d2e8] BOOTMEM [ 0.000000] #34 [0001e6d300 - 0001e6d368] BOOTMEM [ 0.000000] #35 [0001e6d380 - 0001e6d3e8] BOOTMEM [ 0.000000] #36 [0001e6d400 - 0001e6d468] BOOTMEM [ 0.000000] #37 [0001e6d480 - 0001e6d4e8] BOOTMEM [ 0.000000] #38 [0001e6d500 - 0001e6d568] BOOTMEM [ 0.000000] #39 [0001e6d580 - 0001e6d5e8] BOOTMEM [ 0.000000] #40 [0001e6d600 - 0001e6d668] BOOTMEM [ 0.000000] #41 [0001e6d680 - 0001e6d6e8] BOOTMEM [ 0.000000] #42 [0001e6d700 - 0001e6d768] BOOTMEM [ 0.000000] #43 [0001e6d780 - 0001e6d7e8] BOOTMEM [ 0.000000] #44 [0001e6d800 - 0001e6d868] BOOTMEM [ 0.000000] #45 [0001e6d880 - 0001e6d8e8] BOOTMEM [ 0.000000] #46 [0001e6d900 - 0001e6d968] BOOTMEM [ 0.000000] #47 [0001e6d980 - 0001e6d9e8] BOOTMEM [ 0.000000] #48 [0001e6da00 - 0001e6da68] BOOTMEM [ 0.000000] #49 [0001e6da80 - 0001e6dae8] BOOTMEM [ 0.000000] #50 [0001e6db00 - 0001e6db68] BOOTMEM [ 0.000000] #51 [0001e6db80 - 0001e6dbe8] BOOTMEM [ 0.000000] #52 [0001e6dc00 - 0001e6dc68] BOOTMEM [ 0.000000] #53 [0001e6dc80 - 0001e6dce8] BOOTMEM [ 0.000000] #54 [0001e6dd00 - 0001e6dd68] BOOTMEM [ 0.000000] #55 [0001e6dd80 - 0001e6dde8] BOOTMEM [ 0.000000] #56 [0001e47fc0 - 0001e47fe0] BOOTMEM [ 0.000000] #57 [0001e6de00 - 0001e6de20] BOOTMEM [ 0.000000] #58 [0001e6de40 - 0001e6de60] BOOTMEM [ 0.000000] #59 [0001e6de80 - 0001e6dea0] BOOTMEM [ 0.000000] #60 [0001e6dec0 - 0001e6dee0] BOOTMEM [ 0.000000] #61 [0001e6df00 - 0001e6df49] BOOTMEM [ 0.000000] #62 [0001e6df80 - 0001e6dfc9] BOOTMEM [ 0.000000] #63 [0002000000 - 000201b000] BOOTMEM [ 0.000000] #64 [0002080000 - 000209b000] BOOTMEM [ 0.000000] #65 [0002100000 - 000211b000] BOOTMEM [ 0.000000] #66 [0002180000 - 000219b000] BOOTMEM [ 0.000000] #67 [0001e71000 - 0001e71008] BOOTMEM [ 0.000000] #68 [0001e71040 - 0001e71048] BOOTMEM [ 0.000000] #69 [0001e71080 - 0001e71090] BOOTMEM [ 0.000000] #70 [0001e710c0 - 0001e710e0] BOOTMEM [ 0.000000] #71 [0001e71100 - 0001e71230] BOOTMEM [ 0.000000] #72 [0001e71240 - 0001e71290] BOOTMEM [ 0.000000] #73 [0001e712c0 - 0001e71310] BOOTMEM [ 0.000000] #74 [0001e71340 - 0001e79340] BOOTMEM [ 0.000000] #75 [0001e6f000 - 0001e6f008] BOOTMEM [ 0.000000] #76 [0001e6f040 - 0001e6f048] BOOTMEM [ 0.000000] #77 [0001e6f080 - 0001e6f2c0] BOOTMEM [ 0.000000] #78 [000219b000 - 000619b000] BOOTMEM [ 0.000000] #79 [0001e79340 - 0001e99340] BOOTMEM [ 0.000000] #80 [0001e99340 - 0001ed9340] BOOTMEM [ 0.000000] #81 [000001b800 - 0000023800] BOOTMEM [ 0.000000] Memory: 3944840k/5701632k available (6492k kernel code, 1613872k absent, 142920k reserved, 6707k data, 600k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:712 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2526.925 MHz processor. [ 0.001007] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.85 BogoMIPS (lpj=2526925) [ 0.001155] pid_max: default: 32768 minimum: 301 [ 0.002017] Security Framework initialized [ 0.002383] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004837] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.006015] Mount-cache hash table entries: 256 [ 0.006224] Initializing cgroup subsys ns [ 0.006299] Initializing cgroup subsys cpuacct [ 0.006374] Initializing cgroup subsys freezer [ 0.006473] CPU: Physical Processor ID: 0 [ 0.006545] CPU: Processor Core ID: 0 [ 0.006617] mce: CPU supports 6 MCE banks [ 0.006695] CPU0: Thermal monitoring enabled (TM2) [ 0.006771] using mwait in idle threads. [ 0.006844] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.007005] ... version: 2 [ 0.007078] ... bit width: 40 [ 0.007151] ... generic registers: 2 [ 0.007224] ... value mask: 000000ffffffffff [ 0.007298] ... max period: 000000007fffffff [ 0.007372] ... fixed-purpose events: 3 [ 0.007443] ... event mask: 0000000700000003 [ 0.007560] ACPI: Core revision 20100702 [ 0.023067] Setting APIC routing to flat [ 0.023485] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.034131] CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 0a [ 0.034999] Booting Node 0, Processors #1 [ 0.106018] Brought up 2 CPUs [ 0.106160] Total of 2 processors activated (10107.58 BogoMIPS). [ 0.107057] kworker/u:0 used greatest stack depth: 5824 bytes left [ 0.107117] Time: 19:58:02 Date: 11/28/10 [ 0.107186] NET: Registered protocol family 16 [ 0.108021] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.108021] ACPI: bus type pci registered [ 0.108083] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.108145] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 [ 0.124551] PCI: Using configuration type 1 for base access [ 0.130018] bio: create slab at 0 [ 0.131850] ACPI: EC: EC description table is found, configuring boot EC [ 0.134937] ACPI: BIOS _OSI(Linux) query honored via DMI [ 0.143863] ACPI: SSDT 000000009d8d7c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.144443] ACPI: Dynamic OEM Table Load: [ 0.144597] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.145187] ACPI: SSDT 000000009d8d5020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.145773] ACPI: Dynamic OEM Table Load: [ 0.145926] ACPI: SSDT (null) 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.146828] ACPI: SSDT 000000009d8d6ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.147392] ACPI: Dynamic OEM Table Load: [ 0.147545] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.147837] ACPI: SSDT 000000009d8d6f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.148443] ACPI: Dynamic OEM Table Load: [ 0.148596] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.150009] ACPI: Interpreter enabled [ 0.150083] ACPI: (supports S0 S3 S4 S5) [ 0.150329] ACPI: Using IOAPIC for interrupt routing [ 0.160128] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.160159] ACPI: Power Resource [PUBS] (on) [ 0.162170] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.162247] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.162685] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.162818] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.162895] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.162972] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.163022] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 0.163682] pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfebfffff] [ 0.163809] DMAR: Forcing write-buffer flush capability [ 0.163883] DMAR: Disabling IOMMU for graphics on this chipset [ 0.164050] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.164052] pci 0000:00:01.0: PME# disabled [ 0.164073] pci 0000:00:02.0: reg 10: [mem 0xf4400000-0xf47fffff 64bit] [ 0.164080] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.164085] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807] [ 0.164127] pci 0000:00:03.0: reg 10: [mem 0xfc226800-0xfc22680f 64bit] [ 0.164166] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.164169] pci 0000:00:03.0: PME# disabled [ 0.164195] pci 0000:00:03.3: reg 10: [io 0x1830-0x1837] [ 0.164202] pci 0000:00:03.3: reg 14: [mem 0xfc224000-0xfc224fff] [ 0.164317] pci 0000:00:19.0: reg 10: [mem 0xfc200000-0xfc21ffff] [ 0.164328] pci 0000:00:19.0: reg 14: [mem 0xfc225000-0xfc225fff] [ 0.164339] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f] [ 0.164405] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.164409] pci 0000:00:19.0: PME# disabled [ 0.164484] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f] [ 0.164590] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f] [ 0.164696] pci 0000:00:1a.2: reg 20: [io 0x18a0-0x18bf] [ 0.164783] pci 0000:00:1a.7: reg 10: [mem 0xfc226c00-0xfc226fff] [ 0.164868] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.164873] pci 0000:00:1a.7: PME# disabled [ 0.164918] pci 0000:00:1b.0: reg 10: [mem 0xfc220000-0xfc223fff 64bit] [ 0.165030] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.165035] pci 0000:00:1b.0: PME# disabled [ 0.165132] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.165136] pci 0000:00:1c.0: PME# disabled [ 0.165236] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.165240] pci 0000:00:1c.1: PME# disabled [ 0.165339] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.165344] pci 0000:00:1c.2: PME# disabled [ 0.165443] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.165448] pci 0000:00:1c.3: PME# disabled [ 0.165547] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.165552] pci 0000:00:1c.4: PME# disabled [ 0.165633] pci 0000:00:1d.0: reg 20: [io 0x18c0-0x18df] [ 0.165740] pci 0000:00:1d.1: reg 20: [io 0x18e0-0x18ff] [ 0.165845] pci 0000:00:1d.2: reg 20: [io 0x1c00-0x1c1f] [ 0.165935] pci 0000:00:1d.7: reg 10: [mem 0xfc227000-0xfc2273ff] [ 0.166022] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.166027] pci 0000:00:1d.7: PME# disabled [ 0.166295] pci 0000:00:1f.2: reg 10: [io 0x1c48-0x1c4f] [ 0.166306] pci 0000:00:1f.2: reg 14: [io 0x183c-0x183f] [ 0.166317] pci 0000:00:1f.2: reg 18: [io 0x1c40-0x1c47] [ 0.166328] pci 0000:00:1f.2: reg 1c: [io 0x1838-0x183b] [ 0.166338] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f] [ 0.166349] pci 0000:00:1f.2: reg 24: [mem 0xfc226000-0xfc2267ff] [ 0.166397] pci 0000:00:1f.2: PME# supported from D3hot [ 0.166401] pci 0000:00:1f.2: PME# disabled [ 0.166440] pci 0000:00:1f.3: reg 10: [mem 0xfc227400-0xfc2274ff 64bit] [ 0.166469] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f] [ 0.166550] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref] [ 0.166561] pci 0000:01:00.0: reg 14: [io 0x2000-0x20ff] [ 0.166572] pci 0000:01:00.0: reg 18: [mem 0xbfff0000-0xbfffffff] [ 0.166609] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.166635] pci 0000:01:00.0: supports D1 D2 [ 0.166650] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.166725] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.166728] pci 0000:00:01.0: bridge window [mem 0xbff00000-0xbfffffff] [ 0.166732] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.166786] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.166863] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.166867] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.166874] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.167044] pci 0000:03:00.0: reg 10: [mem 0xf4200000-0xf4201fff 64bit] [ 0.167205] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.167216] pci 0000:03:00.0: PME# disabled [ 0.167252] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.167329] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) [ 0.167333] pci 0000:00:1c.1: bridge window [mem 0xf4200000-0xf42fffff] [ 0.167341] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.167444] pci 0000:04:00.0: reg 10: [mem 0xf4300000-0xf43003ff] [ 0.167479] pci 0000:04:00.0: reg 18: [io 0x3000-0x30ff] [ 0.167547] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.167623] pci 0000:00:1c.2: PCI bridge to [bus 04-04] [ 0.167700] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.167705] pci 0000:00:1c.2: bridge window [mem 0xf4300000-0xf43fffff] [ 0.167711] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.167766] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.167843] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.167848] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.167855] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref] [ 0.167910] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] [ 0.167987] pci 0000:00:1c.4: bridge window [io 0x5000-0x5fff] [ 0.167991] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff] [ 0.168003] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref] [ 0.168068] pci 0000:15:00.0: reg 10: [mem 0xf4800000-0xf4800fff] [ 0.168095] pci 0000:15:00.0: supports D1 D2 [ 0.168096] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.168102] pci 0000:15:00.0: PME# disabled [ 0.168146] pci 0000:15:00.1: reg 10: [mem 0xf4801000-0xf48017ff] [ 0.168245] pci 0000:15:00.1: supports D1 D2 [ 0.168247] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.168252] pci 0000:15:00.1: PME# disabled [ 0.168297] pci 0000:15:00.2: reg 10: [mem 0xf4801800-0xf48018ff] [ 0.168395] pci 0000:15:00.2: supports D1 D2 [ 0.168397] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.168402] pci 0000:15:00.2: PME# disabled [ 0.168447] pci 0000:15:00.3: reg 10: [mem 0xf4801c00-0xf4801cff] [ 0.168545] pci 0000:15:00.3: supports D1 D2 [ 0.168547] pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.168552] pci 0000:15:00.3: PME# disabled [ 0.168597] pci 0000:15:00.4: reg 10: [mem 0xf4802000-0xf48020ff] [ 0.168695] pci 0000:15:00.4: supports D1 D2 [ 0.168697] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.168703] pci 0000:15:00.4: PME# disabled [ 0.168747] pci 0000:15:00.5: reg 10: [mem 0xf4802400-0xf48024ff] [ 0.168846] pci 0000:15:00.5: supports D1 D2 [ 0.168848] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold [ 0.168853] pci 0000:15:00.5: PME# disabled [ 0.168924] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode) [ 0.169004] pci 0000:00:1e.0: bridge window [io 0x6000-0x9fff] [ 0.169008] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff] [ 0.169015] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref] [ 0.169017] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.169019] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.169021] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.169024] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.169026] pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfebfffff] (subtractive decode) [ 0.169113] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.169202] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.169232] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.169259] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.169286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.169312] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.169343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.169373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.174070] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.175279] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.175829] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.176385] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.176935] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.177513] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.178074] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.178624] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.179135] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.179135] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 0.179236] vgaarb: loaded [ 0.179352] SCSI subsystem initialized [ 0.179352] libata version 3.00 loaded. [ 0.179352] usbcore: registered new interface driver usbfs [ 0.180009] usbcore: registered new interface driver hub [ 0.180088] usbcore: registered new device driver usb [ 0.180093] Advanced Linux Sound Architecture Driver Version 1.0.23. [ 0.180093] PCI: Using ACPI for IRQ routing [ 0.180166] PCI: pci_cache_line_size set to 64 bytes [ 0.180342] reserve RAM buffer: 000000000009ac00 - 000000000009ffff [ 0.180344] reserve RAM buffer: 000000009d6a1000 - 000000009fffffff [ 0.180347] reserve RAM buffer: 000000009d7b7000 - 000000009fffffff [ 0.180350] reserve RAM buffer: 000000009d8c7000 - 000000009fffffff [ 0.180354] reserve RAM buffer: 000000009dc00000 - 000000009fffffff [ 0.180369] cfg80211: Calling CRDA to update world regulatory domain [ 0.181028] NetLabel: Initializing [ 0.181101] NetLabel: domain hash size = 128 [ 0.181173] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.181257] NetLabel: unlabeled traffic allowed by default [ 0.181338] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.181338] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.181369] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.184017] Switching to clocksource tsc [ 0.189025] pnp: PnP ACPI init [ 0.189102] ACPI: bus type pnp registered [ 0.250889] pnp: PnP ACPI: found 10 devices [ 0.250962] ACPI: ACPI bus type pnp unregistered [ 0.251043] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.251121] system 00:00: [mem 0x000c0000-0x000c3fff] has been reserved [ 0.251198] system 00:00: [mem 0x000c4000-0x000c7fff] has been reserved [ 0.251274] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.251351] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 0.251428] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.251504] system 00:00: [mem 0x000d4000-0x000d7fff] could not be reserved [ 0.251582] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved [ 0.251659] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.251737] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.251814] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.251894] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.251971] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.252048] system 00:00: [mem 0x00100000-0x9fffffff] could not be reserved [ 0.252126] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.252203] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.252283] system 00:02: [io 0x1000-0x107f] has been reserved [ 0.252359] system 00:02: [io 0x1180-0x11ff] has been reserved [ 0.252435] system 00:02: [io 0x0800-0x080f] has been reserved [ 0.252511] system 00:02: [io 0x15e0-0x15ef] has been reserved [ 0.252586] system 00:02: [io 0x1600-0x167f] has been reserved [ 0.252663] system 00:02: [io 0x1680-0x169f] has been reserved [ 0.252739] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved [ 0.252816] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.252895] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.252972] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.253049] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.253126] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.257888] pci 0000:00:1c.0: BAR 8: assigned [mem 0xa0000000-0xa01fffff] [ 0.257966] pci 0000:00:1c.0: BAR 9: assigned [mem 0xa0200000-0xa03fffff 64bit pref] [ 0.258071] pci 0000:00:1c.1: BAR 9: assigned [mem 0xa0400000-0xa05fffff 64bit pref] [ 0.258176] pci 0000:00:1c.2: BAR 9: assigned [mem 0xa0600000-0xa07fffff pref] [ 0.258281] pci 0000:00:1c.0: BAR 7: assigned [io 0xa000-0xafff] [ 0.258358] pci 0000:00:1c.1: BAR 7: assigned [io 0xb000-0xbfff] [ 0.258434] pci 0000:01:00.0: BAR 6: assigned [mem 0xbff00000-0xbff1ffff pref] [ 0.258538] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.258614] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.258691] pci 0000:00:01.0: bridge window [mem 0xbff00000-0xbfffffff] [ 0.258768] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.258875] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.258953] pci 0000:00:1c.0: bridge window [io 0xa000-0xafff] [ 0.259033] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xa01fffff] [ 0.259112] pci 0000:00:1c.0: bridge window [mem 0xa0200000-0xa03fffff 64bit pref] [ 0.259221] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.259297] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff] [ 0.259377] pci 0000:00:1c.1: bridge window [mem 0xf4200000-0xf42fffff] [ 0.259456] pci 0000:00:1c.1: bridge window [mem 0xa0400000-0xa05fffff 64bit pref] [ 0.259566] pci 0000:04:00.0: BAR 6: assigned [mem 0xa0600000-0xa060ffff pref] [ 0.259669] pci 0000:00:1c.2: PCI bridge to [bus 04-04] [ 0.259745] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.259824] pci 0000:00:1c.2: bridge window [mem 0xf4300000-0xf43fffff] [ 0.259906] pci 0000:00:1c.2: bridge window [mem 0xa0600000-0xa07fffff pref] [ 0.260015] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.260091] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.260170] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.260249] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref] [ 0.260359] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] [ 0.260435] pci 0000:00:1c.4: bridge window [io 0x5000-0x5fff] [ 0.260514] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff] [ 0.260593] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref] [ 0.260704] pci 0000:15:00.0: BAR 9: assigned [mem 0xf0000000-0xf3ffffff pref] [ 0.260808] pci 0000:15:00.0: BAR 10: assigned [mem 0xa4000000-0xa7ffffff] [ 0.260888] pci 0000:15:00.0: BAR 7: assigned [io 0x6000-0x60ff] [ 0.260964] pci 0000:15:00.0: BAR 8: assigned [io 0x6400-0x64ff] [ 0.261040] pci 0000:15:00.0: CardBus bridge to [bus 16-17] [ 0.261115] pci 0000:15:00.0: bridge window [io 0x6000-0x60ff] [ 0.261194] pci 0000:15:00.0: bridge window [io 0x6400-0x64ff] [ 0.261273] pci 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref] [ 0.261380] pci 0000:15:00.0: bridge window [mem 0xa4000000-0xa7ffffff] [ 0.261459] pci 0000:00:1e.0: PCI bridge to [bus 15-18] [ 0.261535] pci 0000:00:1e.0: bridge window [io 0x6000-0x9fff] [ 0.261615] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff] [ 0.261694] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref] [ 0.261808] pci 0000:00:01.0: enabling device (0106 -> 0107) [ 0.261886] alloc irq_desc for 16 on node -1 [ 0.261888] alloc kstat_irqs on node -1 [ 0.261892] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.261970] pci 0000:00:01.0: setting latency timer to 64 [ 0.261978] alloc irq_desc for 20 on node -1 [ 0.261980] alloc kstat_irqs on node -1 [ 0.261983] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.262062] pci 0000:00:1c.0: setting latency timer to 64 [ 0.262072] alloc irq_desc for 21 on node -1 [ 0.262073] alloc kstat_irqs on node -1 [ 0.262076] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.262155] pci 0000:00:1c.1: setting latency timer to 64 [ 0.262164] alloc irq_desc for 22 on node -1 [ 0.262165] alloc kstat_irqs on node -1 [ 0.262168] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.262247] pci 0000:00:1c.2: setting latency timer to 64 [ 0.262255] alloc irq_desc for 23 on node -1 [ 0.262256] alloc kstat_irqs on node -1 [ 0.262259] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.262338] pci 0000:00:1c.3: setting latency timer to 64 [ 0.262347] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.262426] pci 0000:00:1c.4: setting latency timer to 64 [ 0.262433] pci 0000:00:1e.0: setting latency timer to 64 [ 0.262445] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.262526] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.262528] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.262530] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.262532] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff] [ 0.262533] pci_bus 0000:00: resource 8 [mem 0xa0000000-0xfebfffff] [ 0.262535] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.262537] pci_bus 0000:01: resource 1 [mem 0xbff00000-0xbfffffff] [ 0.262539] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.262541] pci_bus 0000:02: resource 0 [io 0xa000-0xafff] [ 0.262543] pci_bus 0000:02: resource 1 [mem 0xa0000000-0xa01fffff] [ 0.262545] pci_bus 0000:02: resource 2 [mem 0xa0200000-0xa03fffff 64bit pref] [ 0.262547] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff] [ 0.262549] pci_bus 0000:03: resource 1 [mem 0xf4200000-0xf42fffff] [ 0.262551] pci_bus 0000:03: resource 2 [mem 0xa0400000-0xa05fffff 64bit pref] [ 0.262553] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] [ 0.262554] pci_bus 0000:04: resource 1 [mem 0xf4300000-0xf43fffff] [ 0.262556] pci_bus 0000:04: resource 2 [mem 0xa0600000-0xa07fffff pref] [ 0.262558] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] [ 0.262560] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf9ffffff] [ 0.262562] pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf40fffff 64bit pref] [ 0.262564] pci_bus 0000:0d: resource 0 [io 0x5000-0x5fff] [ 0.262566] pci_bus 0000:0d: resource 1 [mem 0xfa000000-0xfbffffff] [ 0.262568] pci_bus 0000:0d: resource 2 [mem 0xf4100000-0xf41fffff 64bit pref] [ 0.262570] pci_bus 0000:15: resource 0 [io 0x6000-0x9fff] [ 0.262571] pci_bus 0000:15: resource 1 [mem 0xf4800000-0xf7ffffff] [ 0.262574] pci_bus 0000:15: resource 2 [mem 0xf0000000-0xf3ffffff 64bit pref] [ 0.262575] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7] [ 0.262577] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff] [ 0.262579] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff] [ 0.262581] pci_bus 0000:15: resource 7 [mem 0x000d8000-0x000dbfff] [ 0.262583] pci_bus 0000:15: resource 8 [mem 0xa0000000-0xfebfffff] [ 0.262585] pci_bus 0000:16: resource 0 [io 0x6000-0x60ff] [ 0.262586] pci_bus 0000:16: resource 1 [io 0x6400-0x64ff] [ 0.262588] pci_bus 0000:16: resource 2 [mem 0xf0000000-0xf3ffffff pref] [ 0.262590] pci_bus 0000:16: resource 3 [mem 0xa4000000-0xa7ffffff] [ 0.262612] NET: Registered protocol family 2 [ 0.262793] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.264064] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.267804] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.268430] TCP: Hash tables configured (established 524288 bind 65536) [ 0.268507] TCP reno registered [ 0.268588] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.268704] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.268928] NET: Registered protocol family 1 [ 0.269022] pci 0000:00:02.0: Boot video device [ 0.269036] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.269038] pci 0000:00:1a.0: Performing full reset [ 0.269058] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.269059] pci 0000:00:1a.1: Performing full reset [ 0.269078] pci 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.269080] pci 0000:00:1a.2: Performing full reset [ 0.269153] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.269155] pci 0000:00:1d.0: Performing full reset [ 0.269174] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.269176] pci 0000:00:1d.1: Performing full reset [ 0.269195] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.269197] pci 0000:00:1d.2: Performing full reset [ 0.269288] PCI: CLS 64 bytes, default 64 [ 0.269335] Trying to unpack rootfs image as initramfs... [ 0.310685] Freeing initrd memory: 2252k freed [ 0.311369] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.311446] Placing 64MB software IO TLB between ffff88000219b000 - ffff88000619b000 [ 0.311551] software IO TLB at phys 0x219b000 - 0x619b000 [ 0.311759] Simple Boot Flag at 0x35 set to 0x1 [ 0.312566] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07 [ 0.312645] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07 [ 0.312752] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.312860] Scanning for low memory corruption every 60 seconds [ 0.313203] audit: initializing netlink socket (disabled) [ 0.313290] type=2000 audit(1290974282.311:1): initialized [ 0.333470] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.335553] VFS: Disk quotas dquot_6.5.2 [ 0.335687] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.336378] fuse init (API version 7.15) [ 0.336562] SGI XFS with security attributes, large block/inode numbers, no debug enabled [ 0.337211] msgmni has been set to 7709 [ 0.337551] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.337656] io scheduler noop registered [ 0.337729] io scheduler deadline registered (default) [ 0.337850] io scheduler cfq registered [ 0.338661] pcieport 0000:00:01.0: ACPI _OSC control granted for 0x1d [ 0.338744] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.338764] alloc irq_desc for 40 on node -1 [ 0.338766] alloc kstat_irqs on node -1 [ 0.338775] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.338876] pcieport 0000:00:1c.0: ACPI _OSC control granted for 0x1d [ 0.338987] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.339028] alloc irq_desc for 41 on node -1 [ 0.339029] alloc kstat_irqs on node -1 [ 0.339037] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.339166] pcieport 0000:00:1c.1: ACPI _OSC control granted for 0x1d [ 0.339253] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.339294] alloc irq_desc for 42 on node -1 [ 0.339295] alloc kstat_irqs on node -1 [ 0.339303] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X [ 0.339425] pcieport 0000:00:1c.2: ACPI _OSC control granted for 0x1d [ 0.339514] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.339554] alloc irq_desc for 43 on node -1 [ 0.339556] alloc kstat_irqs on node -1 [ 0.339563] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X [ 0.339692] pcieport 0000:00:1c.3: ACPI _OSC control granted for 0x1d [ 0.340363] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.340404] alloc irq_desc for 44 on node -1 [ 0.340405] alloc kstat_irqs on node -1 [ 0.340413] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X [ 0.340535] pcieport 0000:00:1c.4: ACPI _OSC control granted for 0x1d [ 0.340623] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.340664] alloc irq_desc for 45 on node -1 [ 0.340665] alloc kstat_irqs on node -1 [ 0.340672] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X [ 0.340872] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.341161] Non-volatile memory driver v1.3 [ 0.341236] Linux agpgart interface v0.103 [ 0.341413] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 0.343997] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 0.364969] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.365481] ACPI: AC Adapter [AC] (on-line) [ 0.365669] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.365958] ACPI: Lid Switch [LID] [ 0.366087] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.366196] ACPI: Sleep Button [SLPB] [ 0.366327] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.366433] ACPI: Power Button [PWRF] [ 0.366575] ACPI: acpi_idle registered with cpuidle [ 0.368451] Monitor-Mwait will be used to enter C-1 state [ 0.368467] Monitor-Mwait will be used to enter C-2 state [ 0.368481] Monitor-Mwait will be used to enter C-3 state [ 0.368485] Marking TSC unstable due to TSC halts in idle [ 0.368598] Switching to clocksource hpet [ 0.411831] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.411910] ACPI: Thermal Zone [THM0] (50 C) [ 0.413044] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.413124] ACPI: Thermal Zone [THM1] (48 C) [ 0.413318] [drm] Initialized drm 1.1.0 20060810 [ 0.413467] ACPI: Battery Slot [BAT0] (battery absent) [ 0.413481] i915 0000:00:02.0: power state changed by ACPI to D0 [ 0.413490] i915 0000:00:02.0: power state changed by ACPI to D0 [ 0.413502] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.413509] i915 0000:00:02.0: setting latency timer to 64 [ 0.500147] mtrr: no more MTRRs available [ 0.500223] [drm] MTRR allocation failed. Graphics performance may suffer. [ 0.500341] alloc irq_desc for 46 on node -1 [ 0.500343] alloc kstat_irqs on node -1 [ 0.500351] i915 0000:00:02.0: irq 46 for MSI/MSI-X [ 0.500361] [drm] set up 31M of stolen space [ 0.608766] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 0.608955] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0 [ 1.150652] Console: switching to colour frame buffer device 180x56 [ 1.153319] fb0: inteldrmfb frame buffer device [ 1.153337] drm: registered panic notifier [ 1.156074] acpi device:01: registered as cooling_device2 [ 1.156268] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 1.156311] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 1.160596] acpi device:07: registered as cooling_device3 [ 1.160773] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input4 [ 1.160817] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 1.160899] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.160988] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.161482] alloc irq_desc for 17 on node -1 [ 1.161484] alloc kstat_irqs on node -1 [ 1.161489] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.181852] 0000:00:03.3: ttyS0 at I/O 0x1830 (irq = 17) is a 16550A [ 1.183719] brd: module loaded [ 1.184582] loop: module loaded [ 1.184864] ahci 0000:00:1f.2: version 3.0 [ 1.184875] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.184934] alloc irq_desc for 47 on node -1 [ 1.184936] alloc kstat_irqs on node -1 [ 1.184945] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X [ 1.184979] ahci: SSS flag set, parallel bus scan disabled [ 1.185055] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 1.185090] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs [ 1.185125] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.185261] scsi0 : ahci [ 1.185399] scsi1 : ahci [ 1.185517] scsi2 : ahci [ 1.185630] scsi3 : ahci [ 1.185965] ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100 irq 47 [ 1.185999] ata2: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180 irq 47 [ 1.186065] ata3: DUMMY [ 1.186077] ata4: DUMMY [ 1.187058] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2 [ 1.187871] e1000e: Copyright (c) 1999 - 2010 Intel Corporation. [ 1.188736] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.189606] e1000e 0000:00:19.0: setting latency timer to 64 [ 1.189719] alloc irq_desc for 48 on node -1 [ 1.189721] alloc kstat_irqs on node -1 [ 1.189730] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X [ 1.339227] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:27:13:b7:45:56 [ 1.340138] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.341054] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008ff-0ff [ 1.342020] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d [ 1.342962] iwlagn: Copyright(c) 2003-2010 Intel Corporation [ 1.344039] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.345094] iwlagn 0000:03:00.0: setting latency timer to 64 [ 1.345141] iwlagn 0000:03:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24 [ 1.365440] iwlagn 0000:03:00.0: device EEPROM VER=0x11e, CALIB=0x4 [ 1.366484] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 1.367618] alloc irq_desc for 49 on node -1 [ 1.367620] alloc kstat_irqs on node -1 [ 1.367655] iwlagn 0000:03:00.0: irq 49 for MSI/MSI-X [ 1.367854] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6] [ 1.491026] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.492953] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.492956] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.494272] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.494275] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.496256] ata1.00: ATA-8: HITACHI HTS725032A9A364, PC3ZC70F, max UDMA/100 [ 1.497402] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.499566] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.499569] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.500937] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.500940] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.502994] ata1.00: configured for UDMA/100 [ 1.516892] ata1.00: configured for UDMA/100 [ 1.518078] ata1: EH complete [ 1.530088] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72503 PC3Z PQ: 0 ANSI: 5 [ 1.531436] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.531508] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.533925] sd 0:0:0:0: [sda] Write Protect is off [ 1.535130] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.535147] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.560494] sda: sda1 sda2 [ 1.562011] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.836025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.842712] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 1.843608] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 1.843611] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.848393] ata2.00: ATAPI: HL-DT-ST DVDRAM GU10N, MX05, max UDMA/133 [ 1.855078] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 1.855975] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 1.855978] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.860768] ata2.00: configured for UDMA/133 [ 1.876984] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GU10N MX05 PQ: 0 ANSI: 5 [ 1.889320] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.890498] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.891778] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.891853] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.015836] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 [ 2.017021] yenta_cardbus 0000:15:00.0: Socket status: 30000006 [ 2.018234] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x6000-0x9fff] [ 2.019416] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4800000-0xf7ffffff] [ 2.020584] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4800000-0xf7ffffff: excluding 0xf4800000-0xf4b7ffff [ 2.021806] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf3ffffff 64bit pref] [ 2.023041] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf3ffffff: excluding 0xf0000000-0xf3ffffff [ 2.024910] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.026202] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 2.026338] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 2.027752] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 2.029050] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 2.030142] modprobe used greatest stack depth: 5352 bytes left [ 2.031650] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 2.031654] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 2.032950] drivers/usb/core/inode.c: creating file 'devices' [ 2.032953] drivers/usb/core/inode.c: creating file '001' [ 2.033010] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 2.034312] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 2.034316] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 2.034340] ehci_hcd 0000:00:1a.7: debug port 1 [ 2.035621] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 2.039499] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 2.039501] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 2.039513] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00 [ 2.040797] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 2.044682] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 2.045502] Monitor-Mwait will be used to enter C-3 state [ 2.051016] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 2.052308] usb usb1: default language 0x0409 [ 2.052313] usb usb1: udev 1, busnum 1, minor = 0 [ 2.052315] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.053587] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.054855] usb usb1: Product: EHCI Host Controller [ 2.056116] usb usb1: Manufacturer: Linux 2.6.36-gentoo-r3 ehci_hcd [ 2.057373] usb usb1: SerialNumber: 0000:00:1a.7 [ 2.058697] usb usb1: usb_probe_device [ 2.058699] usb usb1: configuration #1 chosen from 1 choice [ 2.058705] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 2.058747] hub 1-0:1.0: usb_probe_interface [ 2.058749] hub 1-0:1.0: usb_probe_interface - got id [ 2.058750] hub 1-0:1.0: USB hub found [ 2.060009] hub 1-0:1.0: 6 ports detected [ 2.061275] hub 1-0:1.0: standalone hub [ 2.061277] hub 1-0:1.0: no power switching (usb 1.0) [ 2.061278] hub 1-0:1.0: individual port over-current protection [ 2.061280] hub 1-0:1.0: power on to power good time: 20ms [ 2.061284] hub 1-0:1.0: local power source is good [ 2.061286] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 2.061312] drivers/usb/core/inode.c: creating file '001' [ 2.061485] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 2.062882] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 2.064098] alloc irq_desc for 19 on node -1 [ 2.064099] alloc kstat_irqs on node -1 [ 2.064104] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 2.065331] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.065334] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.066555] drivers/usb/core/inode.c: creating file '002' [ 2.066603] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 2.067831] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 2.067835] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 2.067860] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.069054] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 2.072945] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 2.072947] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 2.072960] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000 [ 2.074166] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 2.078039] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 2.084012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.085210] usb usb2: default language 0x0409 [ 2.085216] usb usb2: udev 1, busnum 2, minor = 128 [ 2.085218] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.086428] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.087643] usb usb2: Product: EHCI Host Controller [ 2.088857] usb usb2: Manufacturer: Linux 2.6.36-gentoo-r3 ehci_hcd [ 2.090056] usb usb2: SerialNumber: 0000:00:1d.7 [ 2.091305] usb usb2: usb_probe_device [ 2.091307] usb usb2: configuration #1 chosen from 1 choice [ 2.091312] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 2.091359] hub 2-0:1.0: usb_probe_interface [ 2.091361] hub 2-0:1.0: usb_probe_interface - got id [ 2.091362] hub 2-0:1.0: USB hub found [ 2.092549] hub 2-0:1.0: 6 ports detected [ 2.093705] hub 2-0:1.0: standalone hub [ 2.093706] hub 2-0:1.0: no power switching (usb 1.0) [ 2.093708] hub 2-0:1.0: individual port over-current protection [ 2.093709] hub 2-0:1.0: power on to power good time: 20ms [ 2.093713] hub 2-0:1.0: local power source is good [ 2.093715] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 2.093740] drivers/usb/core/inode.c: creating file '001' [ 2.093809] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.094986] ohci_hcd: block sizes: ed 80 td 96 [ 2.095037] uhci_hcd: USB Universal Host Controller Interface driver [ 2.096395] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 2.097681] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 2.098823] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.099959] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2.099962] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.101113] drivers/usb/core/inode.c: creating file '003' [ 2.101162] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 2.102301] uhci_hcd 0000:00:1a.0: detected 2 ports [ 2.103399] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.103401] uhci_hcd 0000:00:1a.0: Performing full reset [ 2.103416] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 2.103428] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 [ 2.104538] usb usb3: default language 0x0409 [ 2.104543] usb usb3: udev 1, busnum 3, minor = 256 [ 2.104545] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.105624] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.106710] usb usb3: Product: UHCI Host Controller [ 2.107798] usb usb3: Manufacturer: Linux 2.6.36-gentoo-r3 uhci_hcd [ 2.108891] usb usb3: SerialNumber: 0000:00:1a.0 [ 2.110059] usb usb3: usb_probe_device [ 2.110061] usb usb3: configuration #1 chosen from 1 choice [ 2.110066] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 2.110107] hub 3-0:1.0: usb_probe_interface [ 2.110109] hub 3-0:1.0: usb_probe_interface - got id [ 2.110110] hub 3-0:1.0: USB hub found [ 2.111190] hub 3-0:1.0: 2 ports detected [ 2.112228] hub 3-0:1.0: standalone hub [ 2.112230] hub 3-0:1.0: no power switching (usb 1.0) [ 2.112231] hub 3-0:1.0: individual port over-current protection [ 2.112233] hub 3-0:1.0: power on to power good time: 2ms [ 2.112237] hub 3-0:1.0: local power source is good [ 2.112238] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 2.112251] drivers/usb/core/inode.c: creating file '001' [ 2.112276] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0 [ 2.112294] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.113360] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 2.113363] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.114395] drivers/usb/core/inode.c: creating file '004' [ 2.114446] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 2.115464] uhci_hcd 0000:00:1a.1: detected 2 ports [ 2.116460] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.116462] uhci_hcd 0000:00:1a.1: Performing full reset [ 2.116486] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 [ 2.117515] usb usb4: default language 0x0409 [ 2.117520] usb usb4: udev 1, busnum 4, minor = 384 [ 2.117522] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.118548] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.119547] usb usb4: Product: UHCI Host Controller [ 2.120549] usb usb4: Manufacturer: Linux 2.6.36-gentoo-r3 uhci_hcd [ 2.121549] usb usb4: SerialNumber: 0000:00:1a.1 [ 2.122587] usb usb4: usb_probe_device [ 2.122589] usb usb4: configuration #1 chosen from 1 choice [ 2.122594] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 2.122635] hub 4-0:1.0: usb_probe_interface [ 2.122636] hub 4-0:1.0: usb_probe_interface - got id [ 2.122638] hub 4-0:1.0: USB hub found [ 2.123635] hub 4-0:1.0: 2 ports detected [ 2.124636] hub 4-0:1.0: standalone hub [ 2.124637] hub 4-0:1.0: no power switching (usb 1.0) [ 2.124639] hub 4-0:1.0: individual port over-current protection [ 2.124641] hub 4-0:1.0: power on to power good time: 2ms [ 2.124644] hub 4-0:1.0: local power source is good [ 2.124646] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 2.124656] drivers/usb/core/inode.c: creating file '001' [ 2.124680] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1 [ 2.124840] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 2.125982] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 2.126976] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2.127961] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 2.127964] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 2.128948] drivers/usb/core/inode.c: creating file '005' [ 2.128998] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 2.129984] uhci_hcd 0000:00:1a.2: detected 2 ports [ 2.130958] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.130960] uhci_hcd 0000:00:1a.2: Performing full reset [ 2.130973] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 2.130985] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0 [ 2.132007] usb usb5: default language 0x0409 [ 2.132013] usb usb5: udev 1, busnum 5, minor = 512 [ 2.132015] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.132985] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.134391] usb usb5: Product: UHCI Host Controller [ 2.135396] usb usb5: Manufacturer: Linux 2.6.36-gentoo-r3 uhci_hcd [ 2.136383] usb usb5: SerialNumber: 0000:00:1a.2 [ 2.137427] usb usb5: usb_probe_device [ 2.137429] usb usb5: configuration #1 chosen from 1 choice [ 2.137434] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 2.137480] hub 5-0:1.0: usb_probe_interface [ 2.137482] hub 5-0:1.0: usb_probe_interface - got id [ 2.137484] hub 5-0:1.0: USB hub found [ 2.138464] hub 5-0:1.0: 2 ports detected [ 2.139439] hub 5-0:1.0: standalone hub [ 2.139440] hub 5-0:1.0: no power switching (usb 1.0) [ 2.139442] hub 5-0:1.0: individual port over-current protection [ 2.139443] hub 5-0:1.0: power on to power good time: 2ms [ 2.139447] hub 5-0:1.0: local power source is good [ 2.139449] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 2.139460] drivers/usb/core/inode.c: creating file '001' [ 2.139483] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2 [ 2.139627] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 2.140742] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 2.141718] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.142710] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.142713] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.143685] drivers/usb/core/inode.c: creating file '006' [ 2.143735] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 2.144713] uhci_hcd 0000:00:1d.0: detected 2 ports [ 2.145685] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.145687] uhci_hcd 0000:00:1d.0: Performing full reset [ 2.145701] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 2.145705] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0 [ 2.146694] usb usb6: default language 0x0409 [ 2.146699] usb usb6: udev 1, busnum 6, minor = 640 [ 2.146701] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.147681] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.148650] usb usb6: Product: UHCI Host Controller [ 2.149635] usb usb6: Manufacturer: Linux 2.6.36-gentoo-r3 uhci_hcd [ 2.150622] usb usb6: SerialNumber: 0000:00:1d.0 [ 2.151665] usb usb6: usb_probe_device [ 2.151667] usb usb6: configuration #1 chosen from 1 choice [ 2.151672] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 2.151719] hub 6-0:1.0: usb_probe_interface [ 2.151721] hub 6-0:1.0: usb_probe_interface - got id [ 2.151723] hub 6-0:1.0: USB hub found [ 2.152727] hub 6-0:1.0: 2 ports detected [ 2.153694] hub 6-0:1.0: standalone hub [ 2.153696] hub 6-0:1.0: no power switching (usb 1.0) [ 2.153697] hub 6-0:1.0: individual port over-current protection [ 2.153699] hub 6-0:1.0: power on to power good time: 2ms [ 2.153703] hub 6-0:1.0: local power source is good [ 2.153704] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 2.153715] drivers/usb/core/inode.c: creating file '001' [ 2.153744] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 2.153758] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.154763] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.154766] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.155774] drivers/usb/core/inode.c: creating file '007' [ 2.155821] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 2.156825] uhci_hcd 0000:00:1d.1: detected 2 ports [ 2.157807] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.157808] uhci_hcd 0000:00:1d.1: Performing full reset [ 2.157832] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0 [ 2.158835] usb usb7: default language 0x0409 [ 2.158840] usb usb7: udev 1, busnum 7, minor = 768 [ 2.158842] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.159815] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.160791] usb usb7: Product: UHCI Host Controller [ 2.161787] usb usb7: Manufacturer: Linux 2.6.36-gentoo-r3 uhci_hcd [ 2.162771] usb usb7: SerialNumber: 0000:00:1d.1 [ 2.163758] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001403 0 ACK POWER sig=k CSC CONNECT [ 2.163761] hub 1-0:1.0: port 1: status 0501 change 0001 [ 2.163774] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT [ 2.163777] hub 1-0:1.0: port 4: status 0501 change 0001 [ 2.163787] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001803 0 ACK POWER sig=j CSC CONNECT [ 2.163789] hub 1-0:1.0: port 6: status 0501 change 0001 [ 2.163854] usb usb7: usb_probe_device [ 2.163856] usb usb7: configuration #1 chosen from 1 choice [ 2.163861] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 2.163907] hub 7-0:1.0: usb_probe_interface [ 2.163909] hub 7-0:1.0: usb_probe_interface - got id [ 2.163910] hub 7-0:1.0: USB hub found [ 2.164887] hub 7-0:1.0: 2 ports detected [ 2.165855] hub 7-0:1.0: standalone hub [ 2.165856] hub 7-0:1.0: no power switching (usb 1.0) [ 2.165858] hub 7-0:1.0: individual port over-current protection [ 2.165859] hub 7-0:1.0: power on to power good time: 2ms [ 2.165863] hub 7-0:1.0: local power source is good [ 2.165865] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 2.165875] drivers/usb/core/inode.c: creating file '001' [ 2.165902] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 [ 2.165916] alloc irq_desc for 18 on node -1 [ 2.165917] alloc kstat_irqs on node -1 [ 2.165921] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.166921] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.166924] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.167906] drivers/usb/core/inode.c: creating file '008' [ 2.167954] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 2.168950] uhci_hcd 0000:00:1d.2: detected 2 ports [ 2.169931] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.169933] uhci_hcd 0000:00:1d.2: Performing full reset [ 2.169958] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00 [ 2.170975] usb usb8: default language 0x0409 [ 2.170980] usb usb8: udev 1, busnum 8, minor = 896 [ 2.170982] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.171960] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.172940] usb usb8: Product: UHCI Host Controller [ 2.173913] usb usb8: Manufacturer: Linux 2.6.36-gentoo-r3 uhci_hcd [ 2.174914] usb usb8: SerialNumber: 0000:00:1d.2 [ 2.175992] usb usb8: usb_probe_device [ 2.175995] usb usb8: configuration #1 chosen from 1 choice [ 2.175999] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 2.176055] hub 8-0:1.0: usb_probe_interface [ 2.176057] hub 8-0:1.0: usb_probe_interface - got id [ 2.176059] hub 8-0:1.0: USB hub found [ 2.177047] hub 8-0:1.0: 2 ports detected [ 2.178050] hub 8-0:1.0: standalone hub [ 2.178051] hub 8-0:1.0: no power switching (usb 1.0) [ 2.178053] hub 8-0:1.0: individual port over-current protection [ 2.178055] hub 8-0:1.0: power on to power good time: 2ms [ 2.178058] hub 8-0:1.0: local power source is good [ 2.178060] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 2.178073] drivers/usb/core/inode.c: creating file '001' [ 2.178100] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 [ 2.178185] usbcore: registered new interface driver usblp [ 2.179173] Initializing USB Mass Storage driver... [ 2.180223] usbcore: registered new interface driver usb-storage [ 2.181214] USB Mass Storage support registered. [ 2.182260] usbcore: registered new interface driver libusual [ 2.183360] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 2.192603] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.193027] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT [ 2.193030] hub 2-0:1.0: port 4: status 0501 change 0001 [ 2.193628] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.194717] mice: PS/2 mouse device common for all mice [ 2.195997] rtc_cmos 00:07: RTC can wake from S4 [ 2.197092] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 2.198138] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.199222] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.200362] Linux video capture interface: v2.00 [ 2.201508] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 2.201578] usbcore: registered new interface driver uvcvideo [ 2.201579] USB Video Class driver (v0.1.0) [ 2.201698] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 2.202049] cpuidle: using governor ladder [ 2.207749] cpuidle: using governor menu [ 2.210208] usbcore: registered new interface driver hiddev [ 2.211398] usbcore: registered new interface driver usbhid [ 2.212035] uhci_hcd 0000:00:1a.0: port 1 portsc 0082,00 [ 2.212479] usbhid: USB HID core driver [ 2.217116] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.218278] alloc irq_desc for 50 on node -1 [ 2.218280] alloc kstat_irqs on node -1 [ 2.218290] HDA Intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 2.218312] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 2.224078] uhci_hcd 0000:00:1a.1: port 2 portsc 0082,00 [ 2.239080] uhci_hcd 0000:00:1a.2: port 2 portsc 0082,00 [ 2.253035] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.254173] ALSA device list: [ 2.255276] #0: HDA Intel at 0xfc220000 irq 50 [ 2.256397] Netfilter messages via NETLINK v0.30. [ 2.257514] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 2.258895] ctnetlink v0.93: registering with nfnetlink. [ 2.260322] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.261483] TCP cubic registered [ 2.262580] NET: Registered protocol family 17 [ 2.263687] Registering the dns_resolver key type [ 2.263710] hub 1-0:1.0: state 7 ports 6 chg 0052 evt 0000 [ 2.263716] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 2.263724] ehci_hcd 0000:00:1a.7: port 1 low speed --> companion [ 2.265291] uhci_hcd 0000:00:1d.1: port 2 portsc 0082,00 [ 2.267353] PM: Resume from disk failed. [ 2.267362] registered taskstats version 1 [ 2.268943] Magic number: 2:594:1002 [ 2.270065] pnp 00:04: hash matches [ 2.271298] Freeing unused kernel memory: 600k freed [ 2.272605] Write protecting the kernel read-only data: 12288k [ 2.274017] Freeing unused kernel memory: 1680k freed [ 2.275824] Freeing unused kernel memory: 1568k freed [ 2.315033] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 2.315060] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s [ 2.366214] ehci_hcd 0000:00:1a.7: port 4 full speed --> companion [ 2.366220] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 2.366224] hub 1-0:1.0: port 4 not reset yet, waiting 50ms [ 2.417030] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 2.417053] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s [ 2.468341] ehci_hcd 0000:00:1a.7: port 6 high speed [ 2.468345] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.520036] usb 1-6: new high speed USB device using ehci_hcd and address 4 [ 2.525313] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-NAPI [ 2.525315] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.571216] ehci_hcd 0000:00:1a.7: port 6 high speed [ 2.571220] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.641623] usb 1-6: skipped 1 descriptor after configuration [ 2.641625] usb 1-6: skipped 5 descriptors after interface [ 2.641628] usb 1-6: skipped 1 descriptor after endpoint [ 2.641630] usb 1-6: skipped 9 descriptors after interface [ 2.641996] usb 1-6: default language 0x0409 [ 2.645765] usb 1-6: udev 4, busnum 1, minor = 3 [ 2.645767] usb 1-6: New USB device found, idVendor=17ef, idProduct=1004 [ 2.645769] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 2.645772] usb 1-6: Product: Integrated Camera [ 2.645773] usb 1-6: Manufacturer: Chicony Electronics Co., Ltd. [ 2.645775] usb 1-6: SerialNumber: SN0001 [ 2.645946] usb 1-6: usb_probe_device [ 2.645950] usb 1-6: configuration #1 chosen from 1 choice [ 2.646119] usb 1-6: adding 1-6:1.0 (config #1, interface 0) [ 2.647615] uvcvideo 1-6:1.0: usb_probe_interface [ 2.647618] uvcvideo 1-6:1.0: usb_probe_interface - got id [ 2.647630] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:1004) [ 2.652798] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input6 [ 2.652898] usb 1-6: adding 1-6:1.1 (config #1, interface 1) [ 2.653044] drivers/usb/core/inode.c: creating file '004' [ 2.653058] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0010 [ 2.653064] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.653066] hub 2-0:1.0: state 7 ports 6 chg 0010 evt 0000 [ 2.653072] hub 2-0:1.0: port 4, status 0501, change 0000, 480 Mb/s [ 2.704323] ehci_hcd 0000:00:1d.7: port 4 high speed [ 2.704327] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.755050] usb 2-4: new high speed USB device using ehci_hcd and address 2 [ 2.811325] ehci_hcd 0000:00:1d.7: port 4 high speed [ 2.811328] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.924621] usb 2-4: skipped 3 descriptors after interface [ 2.924623] usb 2-4: skipped 4 descriptors after interface [ 2.924626] usb 2-4: skipped 4 descriptors after interface [ 2.924628] usb 2-4: skipped 2 descriptors after interface [ 2.924630] usb 2-4: skipped 2 descriptors after interface [ 2.924632] usb 2-4: skipped 5 descriptors after interface [ 2.924634] usb 2-4: skipped 4 descriptors after interface [ 2.933364] usb 2-4: skipped 3 descriptors after interface [ 2.933366] usb 2-4: skipped 4 descriptors after interface [ 2.933368] usb 2-4: skipped 4 descriptors after interface [ 2.933370] usb 2-4: skipped 2 descriptors after interface [ 2.933372] usb 2-4: skipped 2 descriptors after interface [ 2.933374] usb 2-4: skipped 5 descriptors after interface [ 2.933479] usb 2-4: default language 0x0409 [ 2.937479] usb 2-4: udev 2, busnum 2, minor = 129 [ 2.937481] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900 [ 2.937483] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.937485] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device [ 2.937487] usb 2-4: Manufacturer: Ericsson [ 2.937489] usb 2-4: SerialNumber: 3541430255728500 [ 2.937631] usb 2-4: usb_probe_device [ 2.937634] usb 2-4: configuration #1 chosen from 2 choices [ 2.940365] usb 2-4: adding 2-4:1.0 (config #1, interface 0) [ 2.940613] usb 2-4: adding 2-4:1.1 (config #1, interface 1) [ 2.959731] usb 2-4: adding 2-4:1.2 (config #1, interface 2) [ 2.961983] usb 2-4: adding 2-4:1.3 (config #1, interface 3) [ 2.964083] usb 2-4: adding 2-4:1.4 (config #1, interface 4) [ 2.966088] usb 2-4: adding 2-4:1.5 (config #1, interface 5) [ 2.968234] usb 2-4: adding 2-4:1.6 (config #1, interface 6) [ 2.970225] usb 2-4: adding 2-4:1.7 (config #1, interface 7) [ 2.972237] usb 2-4: adding 2-4:1.8 (config #1, interface 8) [ 2.974230] usb 2-4: adding 2-4:1.9 (config #1, interface 9) [ 2.976235] usb 2-4: adding 2-4:1.10 (config #1, interface 10) [ 2.978246] drivers/usb/core/inode.c: creating file '002' [ 2.978258] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 2.978265] uhci_hcd 0000:00:1a.0: port 1 portsc 01a3,00 [ 2.978271] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s [ 3.082043] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 [ 3.184040] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 3.204041] usb usb6: suspend_rh (auto-stop) [ 3.204064] usb usb8: suspend_rh (auto-stop) [ 3.325584] usb 3-1: skipped 1 descriptor after interface [ 3.330583] usb 3-1: default language 0x0409 [ 3.347582] usb 3-1: udev 2, busnum 3, minor = 257 [ 3.347584] usb 3-1: New USB device found, idVendor=046d, idProduct=c050 [ 3.347586] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.347588] usb 3-1: Product: USB-PS/2 Optical Mouse [ 3.347590] usb 3-1: Manufacturer: Logitech [ 3.347729] usb 3-1: usb_probe_device [ 3.347731] usb 3-1: configuration #1 chosen from 1 choice [ 3.350582] usb 3-1: adding 3-1:1.0 (config #1, interface 0) [ 3.350707] usbhid 3-1:1.0: usb_probe_interface [ 3.350709] usbhid 3-1:1.0: usb_probe_interface - got id [ 3.364877] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input7 [ 3.365159] generic-usb 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1/input0 [ 3.365170] drivers/usb/core/inode.c: creating file '002' [ 3.365183] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 3.365190] uhci_hcd 0000:00:1a.1: port 2 portsc 0093,00 [ 3.365196] hub 4-0:1.0: port 2, status 0101, change 0001, 12 Mb/s [ 3.454075] usb usb5: suspend_rh (auto-stop) [ 3.454097] usb usb7: suspend_rh (auto-stop) [ 3.469067] hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 [ 3.571065] usb 4-2: new full speed USB device using uhci_hcd and address 2 [ 3.710569] usb 4-2: skipped 1 descriptor after interface [ 3.713566] usb 4-2: default language 0x0409 [ 3.724563] usb 4-2: udev 2, busnum 4, minor = 385 [ 3.724565] usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145 [ 3.724567] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.724569] usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II [ 3.724571] usb 4-2: Manufacturer: Lenovo Computer Corp [ 3.724712] usb 4-2: usb_probe_device [ 3.724715] usb 4-2: configuration #1 chosen from 1 choice [ 3.726566] usb 4-2: adding 4-2:1.0 (config #1, interface 0) [ 3.726712] usb 4-2: adding 4-2:1.1 (config #1, interface 1) [ 3.726775] usb 4-2: adding 4-2:1.2 (config #1, interface 2) [ 3.726844] usb 4-2: adding 4-2:1.3 (config #1, interface 3) [ 3.726979] drivers/usb/core/inode.c: creating file '002' [ 3.726994] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.726996] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.726999] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 27.685828] cryptsetup used greatest stack depth: 5224 bytes left [ 29.936408] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 30.549963] init-early.sh used greatest stack depth: 4600 bytes left [ 30.903802] mkdir used greatest stack depth: 4360 bytes left [ 31.521421] udev[2902]: starting version 164 [ 31.606850] iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12 [ 31.655493] usb 1-6: link qh4-0001/ffff880157af7a00 start 1 [1/0 us] [ 31.655532] usb 1-6: unlink qh4-0001/ffff880157af7a00 start 1 [1/0 us] [ 31.702874] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 31.705623] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 31.710332] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 31.710334] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 31.710336] thinkpad_acpi: ThinkPad BIOS 7UET89WW (3.19 ), EC 7VHT16WW-1.06 [ 31.710338] thinkpad_acpi: Lenovo ThinkPad T400, model 2767V37 [ 31.758110] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 31.758289] thinkpad_acpi: radio switch found; radios are enabled [ 31.761720] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 31.764693] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked [ 31.765132] Registered led device: tpacpi::thinklight [ 31.765164] Registered led device: tpacpi::power [ 31.765180] Registered led device: tpacpi::standby [ 31.765197] Registered led device: tpacpi::thinkvantage [ 31.767535] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. [ 31.767794] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 31.769262] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9 [ 31.770548] modprobe used greatest stack depth: 4272 bytes left [ 37.166264] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 37.276072] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 37.348131] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) [ 37.422925] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 37.490940] XFS mounting filesystem dm-3 [ 37.656286] Ending clean XFS mount for filesystem: dm-3 [ 37.693773] XFS mounting filesystem dm-4 [ 37.908066] Ending clean XFS mount for filesystem: dm-4 [ 37.970478] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) [ 38.413258] mkdir used greatest stack depth: 3552 bytes left [ 39.838187] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X [ 39.889079] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X [ 78.258587] Adding 4194300k swap on /dev/mapper/gentoo-SWAP. Priority:-1 extents:1 across:4194300k [ 121.853070] uhci_hcd 0000:00:1a.0: reserve dev 2 ep81-INT, period 8, phase 4, 99 us [ 194.344345] wlan0: direct probe to 00:26:5a:f8:c9:18 (try 1) [ 194.544063] wlan0: direct probe to 00:26:5a:f8:c9:18 (try 2) [ 194.548676] wlan0: direct probe responded [ 194.552061] wlan0: authenticate with 00:26:5a:f8:c9:18 (try 1) [ 194.553872] wlan0: authenticated [ 194.553908] wlan0: associate with 00:26:5a:f8:c9:18 (try 1) [ 194.557192] wlan0: RX AssocResp from 00:26:5a:f8:c9:18 (capab=0x431 status=0 aid=2) [ 194.557194] wlan0: associated [ 229.882898] iwlagn 0000:03:00.0: Aggregation not enabled for tid 0 because load = 0 [ 233.386088] iwlagn 0000:03:00.0: iwlagn_tx_agg_start on ra = 00:26:5a:f8:c9:18 tid = 0