dmesg after the fixed ebuild

dmesg-after.txt (text/plain), 32.89 KB, created by Martin Mokrejš on 2010-09-04 10:27:17 UTC

Linux version 2.6.35.4 (root@vrapenec) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.1, pie-0.4.5) ) #1 Fri Sep 3 22:01:41 CEST 2010
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fff9000 (usable)
 BIOS-e820: 000000007fff9000 - 000000007ffff000 (ACPI data)
 BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
DMI 2.3 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x7fff9 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-AFFFF uncachable
  B0000-BFFFF write-combining
  C0000-CFFFF write-protect
  D0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 0E0000000 mask FF0000000 write-combining
  2 base 0D8000000 mask FF8000000 write-combining
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000377fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037400000 page 2M
 0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
ACPI: RSDP 000f6890 00014 (v00 ASUS  )
ACPI: RSDT 7fff9000 0002C (v01 ASUS   P4_L3CS  42302E31 MSFT 31313031)
ACPI: FACP 7fff9080 00074 (v01 ASUS   P4_L3CS  42302E31 MSFT 31313031)
ACPI: DSDT 7fff9100 052E9 (v01   ASUS P4_L3CS  00001000 MSFT 0100000D)
ACPI: FACS 7ffff000 00040
ACPI: BOOT 7fff9040 00028 (v01 ASUS   P4_L3CS  42302E31 MSFT 31313031)
1159MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x0007fff9
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000001 -> 0x0000009f
    0: 0x00000100 -> 0x0007fff9
On node 0 totalpages: 524183
free_area_init_node: node 0, pgdat c14bd8e8, node_mem_map c1562020
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3966 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 2320 pages used for memmap
  HighMem zone: 294635 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xe408
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7fff0000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520087
Kernel command line: root=/dev/sda3 console=ttyS0,57600n8 console=tty0 udev
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Subtract (27 early reservations)
  #0 [0001000000 - 0001559ba4]   TEXT DATA BSS
  #1 [000009fc00 - 0000100000]   BIOS reserved
  #2 [000155a000 - 000156015c]             BRK
  #3 [0000001000 - 0000005000]     ACPI WAKEUP
  #4 [0000007000 - 0000008000]         PGTABLE
  #5 [0001561000 - 0001562000]         BOOTMEM
  #6 [0001562000 - 0002562000]         BOOTMEM
  #7 [0001559c00 - 0001559c04]         BOOTMEM
  #8 [0001559c80 - 0001559d00]         BOOTMEM
  #9 [0001559d00 - 0001559d54]         BOOTMEM
  #10 [0002562000 - 0002564000]         BOOTMEM
  #11 [0001559d80 - 0001559df0]         BOOTMEM
  #12 [0002564000 - 0002568000]         BOOTMEM
  #13 [0001559e00 - 0001559ee0]         BOOTMEM
  #14 [0001559f00 - 0001559f40]         BOOTMEM
  #15 [0001559f80 - 0001559fc0]         BOOTMEM
  #16 [0001560180 - 00015601c0]         BOOTMEM
  #17 [0001560200 - 0001560240]         BOOTMEM
  #18 [0001560280 - 00015602c0]         BOOTMEM
  #19 [0001560300 - 0001560340]         BOOTMEM
  #20 [0001560380 - 00015603c0]         BOOTMEM
  #21 [0001560400 - 0001560410]         BOOTMEM
  #22 [0001560480 - 00015604b7]         BOOTMEM
  #23 [0001560500 - 0001560537]         BOOTMEM
  #24 [0002568000 - 000256c000]         BOOTMEM
  #25 [000256c000 - 00025ec000]         BOOTMEM
  #26 [00025ec000 - 000262c000]         BOOTMEM
Initializing HighMem for node 0 (000377fe:0007fff9)
Memory: 2074008k/2097124k available (3114k kernel code, 22724k reserved, 1755k data, 300k init, 1187820k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffe4000 - 0xfffff000   ( 108 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc14c2000 - 0xc150d000   ( 300 kB)
      .data : 0xc130a920 - 0xc14c16c8   (1755 kB)
      .text : 0xc1000000 - 0xc130a920   (3114 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
	Verbose stalled-CPUs detection is disabled.
NR_IRQS:16
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
Fast TSC calibration using PIT
Detected 1799.912 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.82 BogoMIPS (lpj=17999120)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
mce: CPU supports 4 MCE banks
Performance Events: Netburst events, 
no APIC, boot with the "lapic" boot parameter to force-enable it.
no hardware sampling interrupt available.
Netburst P4/Xeon PMU driver.
... version:                0
... bit width:              40
... generic registers:      18
... value mask:             000000ffffffffff
... max period:             0000007fffffffff
... fixed-purpose events:   0
... event mask:             000000000003ffff
CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz stepping 07
ACPI: Core revision 20100428
ACPI: setting ELCR to 0200 (from 0a28)
devtmpfs: initialized
NET: Registered protocol family 16
i2c-core: driver [dummy] registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0e40, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: Power Resource [PRCF] (off)
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xefffffff pref]
pci 0000:00:1d.0: reg 20: [io  0xb800-0xb81f]
pci 0000:00:1d.1: reg 20: [io  0xb400-0xb41f]
pci 0000:00:1f.0: Enabled i801 SMBus device
pci 0000:00:1f.0: quirk: [io  0xe400-0xe47f] claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0xec00-0xec3f] claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10: [io  0x9800-0x9807]
pci 0000:00:1f.1: reg 14: [io  0x9400-0x9403]
pci 0000:00:1f.1: reg 18: [io  0x9000-0x9007]
pci 0000:00:1f.1: reg 1c: [io  0x8800-0x8803]
pci 0000:00:1f.1: reg 20: [io  0x8400-0x840f]
pci 0000:00:1f.1: reg 24: [mem 0xd5800000-0xd58003ff]
pci 0000:00:1f.3: reg 20: [io  0xe800-0xe81f]
pci 0000:00:1f.5: reg 10: [io  0xe000-0xe0ff]
pci 0000:00:1f.5: reg 14: [io  0xe100-0xe13f]
pci 0000:00:1f.6: reg 10: [io  0xe200-0xe2ff]
pci 0000:00:1f.6: reg 14: [io  0xe300-0xe37f]
pci 0000:01:00.0: reg 10: [mem 0xd8000000-0xdfffffff pref]
pci 0000:01:00.0: reg 14: [io  0xd800-0xd8ff]
pci 0000:01:00.0: reg 18: [mem 0xd7000000-0xd700ffff]
pci 0000:01:00.0: reg 30: [mem 0xd7fe0000-0xd7ffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:01.0:   bridge window [mem 0xd7000000-0xd7efffff]
pci 0000:00:01.0:   bridge window [mem 0xd7f00000-0xdfffffff pref]
pci 0000:02:05.0: reg 10: [io  0xa800-0xa8ff]
pci 0000:02:05.0: reg 14: [mem 0xd6800000-0xd68000ff]
pci 0000:02:05.0: supports D1 D2
pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:05.0: PME# disabled
pci 0000:02:07.0: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:02:07.0: supports D1 D2
pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:07.0: PME# disabled
pci 0000:02:07.1: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:02:07.1: supports D1 D2
pci 0000:02:07.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:07.1: PME# disabled
pci 0000:02:07.2: reg 10: [mem 0xd6000000-0xd60007ff]
pci 0000:02:07.2: PME# supported from D0 D3hot D3cold
pci 0000:02:07.2: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:1e.0:   bridge window [mem 0xd6000000-0xd6ffffff]
pci 0000:00:1e.0:   bridge window [mem 0xd7f00000-0xd7efffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-02]
pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:02 [bus 02-02]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5)
ACPI: PCI Interrupt Link [LNKB] (IRQs 7 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 11) *9
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: WMI: Mapper loaded
Advanced Linux Sound Architecture Driver Version 1.0.23.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
reserve RAM buffer: 000000007fff9000 - 000000007fffffff 
Switching to clocksource tsc
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:02: [io  0xe400-0xe47f] has been reserved
system 00:02: [io  0xe800-0xe81f] has been reserved
system 00:02: [io  0xec00-0xec3f] has been reserved
system 00:02: [io  0x040b] has been reserved
system 00:02: [io  0x0480-0x048f] has been reserved
system 00:02: [io  0x04d6] has been reserved
system 00:03: [mem 0xffa00000-0xffbfffff] has been reserved
system 00:03: [mem 0xffe00000-0xffffffff] could not be reserved
system 00:04: [io  0x04d0-0x04d1] has been reserved
system 00:04: [io  0x077c-0x077f] has been reserved
system 00:0e: [io  0x0610-0x062f] has been reserved
pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x87ffffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:01.0:   bridge window [mem 0xd7000000-0xd7efffff]
pci 0000:00:01.0:   bridge window [mem 0xd7f00000-0xdfffffff pref]
pci 0000:02:07.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
pci 0000:02:07.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
pci 0000:02:07.1: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
pci 0000:02:07.1: BAR 16: assigned [mem 0x8c000000-0x8fffffff]
pci 0000:02:07.0: BAR 0: assigned [mem 0xd6001000-0xd6001fff]
pci 0000:02:07.0: BAR 0: set to [mem 0xd6001000-0xd6001fff] (PCI address [0xd6001000-0xd6001fff]
pci 0000:02:07.1: BAR 0: assigned [mem 0xd6002000-0xd6002fff]
pci 0000:02:07.1: BAR 0: set to [mem 0xd6002000-0xd6002fff] (PCI address [0xd6002000-0xd6002fff]
pci 0000:02:07.0: BAR 13: assigned [io  0xa000-0xa0ff]
pci 0000:02:07.0: BAR 14: assigned [io  0xa400-0xa4ff]
pci 0000:02:07.1: BAR 13: assigned [io  0xac00-0xacff]
pci 0000:02:07.1: BAR 14: assigned [io  0x1000-0x10ff]
pci 0000:02:07.0: CardBus bridge to [bus 03-06]
pci 0000:02:07.0:   bridge window [io  0xa000-0xa0ff]
pci 0000:02:07.0:   bridge window [io  0xa400-0xa4ff]
pci 0000:02:07.0:   bridge window [mem 0x80000000-0x83ffffff pref]
pci 0000:02:07.0:   bridge window [mem 0x88000000-0x8bffffff]
pci 0000:02:07.1: CardBus bridge to [bus 07-0a]
pci 0000:02:07.1:   bridge window [io  0xac00-0xacff]
pci 0000:02:07.1:   bridge window [io  0x1000-0x10ff]
pci 0000:02:07.1:   bridge window [mem 0x84000000-0x87ffffff pref]
pci 0000:02:07.1:   bridge window [mem 0x8c000000-0x8fffffff]
pci 0000:00:1e.0: PCI bridge to [bus 02-02]
pci 0000:00:1e.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:1e.0:   bridge window [mem 0xd6000000-0xd6ffffff]
pci 0000:00:1e.0:   bridge window [mem 0x80000000-0x87ffffff pref]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
pci 0000:02:07.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
pci 0000:02:07.1: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:07.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xd7000000-0xd7efffff]
pci_bus 0000:01: resource 2 [mem 0xd7f00000-0xdfffffff pref]
pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xd6000000-0xd6ffffff]
pci_bus 0000:02: resource 2 [mem 0x80000000-0x87ffffff pref]
pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:03: resource 0 [io  0xa000-0xa0ff]
pci_bus 0000:03: resource 1 [io  0xa400-0xa4ff]
pci_bus 0000:03: resource 2 [mem 0x80000000-0x83ffffff pref]
pci_bus 0000:03: resource 3 [mem 0x88000000-0x8bffffff]
pci_bus 0000:07: resource 0 [io  0xac00-0xacff]
pci_bus 0000:07: resource 1 [io  0x1000-0x10ff]
pci_bus 0000:07: resource 2 [mem 0x84000000-0x87ffffff pref]
pci_bus 0000:07: resource 3 [mem 0x8c000000-0x8fffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
kvm: no hardware support
Simple Boot Flag at 0x3a set to 0x1
microcode: CPU0 sig=0xf27, pf=0x8, revision=0x0
microcode: Microcode Update Driver: v2.00 <[e-mail]>, Peter Oruba
highmem bounce pool size: 64 pages
DLM (built Sep  3 2010 21:45:09) installed
fuse init (API version 7.14)
msgmni has been set to 1730
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pci-stub: invalid id string ""
radeonfb 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=230.00 Mhz, System=183.00 MHz
radeonfb: PLL min 12000 max 35000
i2c i2c-0: adapter [radeonfb monid] registered
i2c i2c-1: adapter [radeonfb dvi] registered
i2c i2c-2: adapter [radeonfb vga] registered
i2c i2c-3: adapter [radeonfb crt2] registered
i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
i2c i2c-1: master_xfer[1] R, addr=0x50, len=128
i2c i2c-1: NAK from device addr 0x50 msg #0
i2c i2c-1: unable to read EDID block.
Marking TSC unstable due to cpufreq changes
Switching to clocksource acpi_pm
i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
i2c i2c-1: master_xfer[1] R, addr=0x50, len=128
i2c i2c-1: NAK from device addr 0x50 msg #0
i2c i2c-1: unable to read EDID block.
i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
i2c i2c-1: master_xfer[1] R, addr=0x50, len=128
i2c i2c-1: NAK from device addr 0x50 msg #0
i2c i2c-1: unable to read EDID block.
i2c i2c-3: master_xfer[0] W, addr=0x50, len=1
i2c i2c-3: master_xfer[1] R, addr=0x50, len=128
i2c i2c-3: NAK from device addr 0x50 msg #0
i2c i2c-3: unable to read EDID block.
i2c i2c-3: master_xfer[0] W, addr=0x50, len=1
i2c i2c-3: master_xfer[1] R, addr=0x50, len=128
i2c i2c-3: NAK from device addr 0x50 msg #0
i2c i2c-3: unable to read EDID block.
i2c i2c-3: master_xfer[0] W, addr=0x50, len=1
i2c i2c-3: master_xfer[1] R, addr=0x50, len=128
i2c i2c-3: NAK from device addr 0x50 msg #0
i2c i2c-3: unable to read EDID block.
Non-DDC laptop panel detected
i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
i2c i2c-2: master_xfer[1] R, addr=0x50, len=128
i2c i2c-2: NAK from device addr 0x50 msg #0
i2c i2c-2: unable to read EDID block.
i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
i2c i2c-2: master_xfer[1] R, addr=0x50, len=128
i2c i2c-2: NAK from device addr 0x50 msg #0
i2c i2c-2: unable to read EDID block.
i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
i2c i2c-2: master_xfer[1] R, addr=0x50, len=128
i2c i2c-2: NAK from device addr 0x50 msg #0
i2c i2c-2: unable to read EDID block.
i2c i2c-3: master_xfer[0] W, addr=0x50, len=1
i2c i2c-3: master_xfer[1] R, addr=0x50, len=128
i2c i2c-3: NAK from device addr 0x50 msg #0
i2c i2c-3: unable to read EDID block.
i2c i2c-3: master_xfer[0] W, addr=0x50, len=1
i2c i2c-3: master_xfer[1] R, addr=0x50, len=128
i2c i2c-3: NAK from device addr 0x50 msg #0
i2c i2c-3: unable to read EDID block.
i2c i2c-3: master_xfer[0] W, addr=0x50, len=1
i2c i2c-3: master_xfer[1] R, addr=0x50, len=128
i2c i2c-3: NAK from device addr 0x50 msg #0
i2c i2c-3: unable to read EDID block.
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: Samsung LTN150P1-L02    
radeonfb: detected LVDS panel size from BIOS: 1400x1050
radeondb: BIOS provided dividers will be used
radeonfb: Dynamic Clock Power Management enabled
Console: switching to colour frame buffer device 175x65
radeonfb (0000:01:00.0): ATI Radeon 4c57 "LW"
ACPI: AC Adapter [ACAD] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LIDD]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Fan [CFAN] (off)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input3
ACPI: Video Device [VGAC] (multi-head: yes  rom: no  post: no)
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (50 C)
ERST: Table is not found!
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT0] (battery present)
lp: driver loaded but no devices found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
serial 0000:00:1f.6: PCI INT B disabled
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 3 (level, low) -> IRQ 3
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8400 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8408 irq 15
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
yenta_cardbus 0000:02:07.0: CardBus bridge found [1043:1624]
ata2.01: ATAPI: Optiarc DVD RW AD-7590A, 1.05, max UDMA/33
ata2.01: configured for UDMA/33
ata1.00: ATA-8: WDC WD3200BEVE-00A0HT0, 11.01A11, max UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48 
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEVE-0 11.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
scsi 1:0:1:0: CD-ROM            Optiarc  DVD RW AD-7590A  1.05 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
 sda1 sda2 sda3 sda4
sr 1:0:1:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: [sda] Attached SCSI disk
sr 1:0:1:0: Attached scsi generic sg1 type 5
yenta_cardbus 0000:02:07.0: ISA IRQ mask 0x0490, PCI irq 5
yenta_cardbus 0000:02:07.0: Socket status: 30000006
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
yenta_cardbus 0000:02:07.1: CardBus bridge found [1043:1624]
yenta_cardbus 0000:02:07.1: ISA IRQ mask 0x0490, PCI irq 11
yenta_cardbus 0000:02:07.1: Socket status: 30000820
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input4
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0xe460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
iTCO_vendor_support: vendor-support=0
cpuidle: using governor ladder
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Intel ICH 0000:00:1f.5: setting latency timer to 64
pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1
pci 0000:07:00.0: reg 14: [mem 0x00000000-0x000000ff]
pci 0000:07:00.0: reg 20: [io  0xfce0-0xfcff]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:07:00.1: reg 14: [mem 0x00000000-0x000000ff]
pci 0000:07:00.1: reg 20: [io  0xfce0-0xfcff]
pci 0000:07:00.1: supports D1 D2
pci 0000:07:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:00.1: PME# disabled
pci 0000:07:00.2: reg 10: [mem 0x00000000-0x000000ff]
pci 0000:07:00.2: reg 14: [mem 0x00000000-0x000000ff]
pci 0000:07:00.2: supports D1 D2
pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:00.2: PME# disabled
pci 0000:07:00.3: reg 10: [mem 0x00000000-0x000007ff]
pci 0000:07:00.3: reg 14: [io  0x0000-0x007f]
pci 0000:07:00.3: supports D2
pci 0000:07:00.3: PME# supported from D2 D3hot D3cold
pci 0000:07:00.3: PME# disabled
pci 0000:07:00.3: BAR 0: assigned [mem 0x8c000000-0x8c0007ff]
pci 0000:07:00.3: BAR 0: set to [mem 0x8c000000-0x8c0007ff] (PCI address [0x8c000000-0x8c0007ff]
pci 0000:07:00.0: BAR 1: assigned [mem 0x8c000800-0x8c0008ff]
pci 0000:07:00.0: BAR 1: set to [mem 0x8c000800-0x8c0008ff] (PCI address [0x8c000800-0x8c0008ff]
pci 0000:07:00.1: BAR 1: assigned [mem 0x8c000900-0x8c0009ff]
pci 0000:07:00.1: BAR 1: set to [mem 0x8c000900-0x8c0009ff] (PCI address [0x8c000900-0x8c0009ff]
pci 0000:07:00.2: BAR 0: assigned [mem 0x8c000a00-0x8c000aff]
pci 0000:07:00.2: BAR 0: set to [mem 0x8c000a00-0x8c000aff] (PCI address [0x8c000a00-0x8c000aff]
pci 0000:07:00.2: BAR 1: assigned [mem 0x8c000b00-0x8c000bff]
pci 0000:07:00.2: BAR 1: set to [mem 0x8c000b00-0x8c000bff] (PCI address [0x8c000b00-0x8c000bff]
pci 0000:07:00.3: BAR 1: assigned [io  0xac00-0xac7f]
pci 0000:07:00.3: BAR 1: set to [io  0xac00-0xac7f] (PCI address [0xac00-0xac7f]
pci 0000:07:00.0: BAR 4: assigned [io  0xac80-0xac9f]
pci 0000:07:00.0: BAR 4: set to [io  0xac80-0xac9f] (PCI address [0xac80-0xac9f]
pci 0000:07:00.1: BAR 4: assigned [io  0xaca0-0xacbf]
pci 0000:07:00.1: BAR 4: set to [io  0xaca0-0xacbf] (PCI address [0xaca0-0xacbf]
Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0/0x0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
intel8x0_measure_ac97_clock: measured 58319 usecs (2802 samples)
intel8x0: clocking to 48000
Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
ALSA device list:
  #0: Intel 82801CA-ICH3 with CS4299 at irq 11
  #1: Intel 82801CA-ICH3 Modem at irq 11
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
SCTP: Hash tables configured (established 65536 bind 65536)
rtc_cmos 00:06: setting system clock to 2010-09-04 12:18:37 UTC (1283602717)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda3): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
devtmpfs: mounted
Freeing unused kernel memory: 300k freed
udev: starting version 161
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
8139too: 8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
8139too 0000:02:05.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
8139too 0000:02:05.0: eth0: RealTek RTL8139 at 0xf80f8000, 00:e0:18:b6:9d:31, IRQ 11
lp0: using parport0 (interrupt-driven).
agpgart-intel 0000:00:00.0: Intel 845G Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
asus_laptop: Asus Laptop Support version 0.42
asus_laptop: Error calling CWAP(1)
asus_laptop:   L3C model detected
asus_laptop: Error setting bluetooth status to 1
input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input7
Registered led device: asus::mail
firewire_ohci 0000:02:07.2: PCI INT C -> Link[LNKC] -> GSI 3 (level, low) -> IRQ 3
firewire_ohci: Added fw-ohci device 0000:02:07.2, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x0
firewire_ohci 0000:07:00.3: enabling device (0080 -> 0083)
firewire_ohci 0000:07:00.3: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
firewire_ohci 0000:07:00.3: setting latency timer to 64
firewire_ohci: Added fw-ohci device 0000:07:00.3, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
firewire_core: created device fw0: GUID 00e018000305e5fc, S400
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:07:00.2: enabling device (0000 -> 0002)
ehci_hcd 0000:07:00.2: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:07:00.2: EHCI Host Controller
ehci_hcd 0000:07:00.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:07:00.2: irq 11, io mem 0x8c000a00
ehci_hcd 0000:07:00.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.35.4 ehci_hcd
usb usb1: SerialNumber: 0000:07:00.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 5, io base 0x0000b800
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.35.4 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000b400
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.35.4 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:07:00.0: enabling device (0000 -> 0003)
uhci_hcd 0000:07:00.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:07:00.0: UHCI Host Controller
uhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:07:00.0: irq 11, io base 0x0000ac80
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.35.4 uhci_hcd
usb usb4: SerialNumber: 0000:07:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:07:00.1: enabling device (0000 -> 0003)
uhci_hcd 0000:07:00.1: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:07:00.1: UHCI Host Controller
uhci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:07:00.1: irq 11, io base 0x0000aca0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.35.4 uhci_hcd
usb usb5: SerialNumber: 0000:07:00.1
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
firewire_core: created device fw1: GUID 00ff06ff00ff30ff, S400
usb 2-2: new low speed USB device using uhci_hcd and address 2
usb 2-2: New USB device found, idVendor=046d, idProduct=c050
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB-PS/2 Optical Mouse
usb 2-2: Manufacturer: Logitech
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input8
generic-usb 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
EXT3-fs (sda3): using internal journal
Adding 2763176k swap on /dev/sda4.  Priority:-1 extents:1 across:2763176k 
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
i2c /dev entries driver
i2c-core: driver [dev_driver] registered
i2c-dev: adapter [radeonfb monid] registered as minor 0
i2c-dev: adapter [radeonfb dvi] registered as minor 1
i2c-dev: adapter [radeonfb vga] registered as minor 2
i2c-dev: adapter [radeonfb crt2] registered as minor 3
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to userspace modesetting.
[drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
agpgart-intel 0000:00:00.0: AGP 2.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
radeonfb 0000:01:00.0: putting AGP V2 device into 4x mode
[drm] Setting GART location based on new memory map
[drm] Loading R100 Microcode
[drm] writeback test succeeded in 1 usecs
microcode: CPU0 updated to revision 0x39, date = 2003-06-04