/etc/modprobe.conf

modprobe.conf (text/plain), 5.94 KB, created by Pacho Ramos on 2010-08-31 19:21:25 UTC

### This file is automatically generated by update-modules
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modprobe.d and read
# the manpage for update-modules(8).
#
alias net-pf-3 off
alias net-pf-4 off
alias net-pf-5 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-10 off
alias net-pf-11 off
alias net-pf-19 off
alias char-major-10-175 agpgart
alias char-major-10-200 tun
alias char-major-81-* bttv
alias char-major-108-* ppp_generic
alias /dev/ppp ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
alias loop-xfer-gen-0 loop_gen
alias loop-xfer-3 loop_fish2
alias loop-xfer-gen-10 loop_gen
alias cipher-2 des
alias cipher-3 fish2
alias cipher-4 blowfish
alias cipher-6 idea
alias cipher-7 serp6f
alias cipher-8 mars6
alias cipher-11 rc62
alias cipher-15 dfc2
alias cipher-16 rijndael
alias cipher-17 rc5
alias char-major-89-* i2c-dev

### update-modules: start processing /etc/modprobe.d/aliases.conf
# Aliases to tell insmod/modprobe which modules to use 

# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off		# Unix
# alias net-pf-2 off		# IPv4
# alias net-pf-3 off		# Amateur Radio AX.25
# alias net-pf-4 off		# IPX
# alias net-pf-5 off		# DDP / appletalk
# alias net-pf-6 off		# Amateur Radio NET/ROM
# alias net-pf-9 off		# X.25
# alias net-pf-10 off		# IPv6
# alias net-pf-11 off		# ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off		# Acorn Econet

alias char-major-10-175	agpgart
alias char-major-10-200	tun
alias char-major-81	bttv
alias char-major-108	ppp_generic
alias /dev/ppp		ppp_generic
alias tty-ldisc-3	ppp_async
alias tty-ldisc-14	ppp_synctty
alias ppp-compress-21	bsd_comp
alias ppp-compress-24	ppp_deflate
alias ppp-compress-26	ppp_deflate

# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0	loop_gen
alias loop-xfer-3	loop_fish2
alias loop-xfer-gen-10	loop_gen
alias cipher-2		des
alias cipher-3		fish2
alias cipher-4		blowfish
alias cipher-6		idea
alias cipher-7		serp6f
alias cipher-8		mars6
alias cipher-11		rc62
alias cipher-15		dfc2
alias cipher-16		rijndael
alias cipher-17		rc5

# Support for i2c and lm_sensors
alias char-major-89    i2c-dev
### update-modules: end processing /etc/modprobe.d/aliases.conf

### update-modules: start processing /etc/modprobe.d/alsa.conf
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.21 ---
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
# --- END: Generated by ALSACONF, do not edit. ---

### update-modules: end processing /etc/modprobe.d/alsa.conf

### update-modules: start processing /etc/modprobe.d/blacklist.conf
# This file lists modules which will not be loaded by udev,
# not at coldplugging and not on hotplug events.

# Add your own entries to this file
# in the format "blacklist <name of module>"

# Some examples:
# evbug is a debug tool and should be loaded explicitly
blacklist evbug

# Autoloading eth1394 most of the time re-orders your network
# interfaces, and with buggy kernel 2.6.21, udev persistent-net
# is not able to rename these devices, so you get eth?_rename devices
# plus an exceeded 30sec boot timeout
blacklist eth1394

# You probably want this to not get the console beep loud on every tab :)
#blacklist pcspkr

# these drivers are very simple, the HID drivers are usually preferred
#blacklist usbmouse
#blacklist usbkbd

# Sometimes loading a framebuffer driver at boot gets the console black
#install pci:v*d*sv*sd*bc03sc*i* /bin/true

# hplip and cups 1.4+ use raw USB devices, so it requires usblp not be loaded
#blacklist usblp

### update-modules: end processing /etc/modprobe.d/blacklist.conf

### update-modules: start processing /etc/modprobe.d/i386.conf
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc
### update-modules: end processing /etc/modprobe.d/i386.conf

### update-modules: start processing /etc/modprobe.d/iwl3945.conf
options iwl3945 fw_restart3945=1
### update-modules: end processing /etc/modprobe.d/iwl3945.conf

### update-modules: start processing /etc/modprobe.d/nvidia.conf
# Nvidia drivers support
alias char-major-195 nvidia
alias /dev/nvidiactl char-major-195

# To tweak the driver the following options can be used, note that
# you should be careful, as it could cause instability!! For more 
# options see /usr/share/doc/nvidia-drivers-195.36.24/README 
#
# !!! SECURITY WARNING !!!
# DO NOT MODIFY OR REMOVE THE DEVICE FILE RELATED OPTIONS UNLESS YOU KNOW
# WHAT YOU ARE DOING.
# ONLY ADD TRUSTED USERS TO THE VIDEO GROUP, THESE USERS MAY BE ABLE TO CRASH,
# COMPROMISE, OR IRREPARABLY DAMAGE THE MACHINE.
options nvidia NVreg_DeviceFileMode=432 NVreg_DeviceFileUID=0 NVreg_DeviceFileGID=27 NVreg_ModifyDeviceFiles=1
### update-modules: end processing /etc/modprobe.d/nvidia.conf

### update-modules: start processing /etc/modprobe.d/pnp-aliases.conf
# /etc/modprobe.d/pnp-aliases
#
# These aliases are used by this udev-rule:
# SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", RUN+="/bin/sh -c '/sbin/modprobe -a $$(while read id; do echo pnp:d$$id; done < /sys$devpath/id)'"
#
# They should help to autoload drivers used by various pnp-devices
# (if not blacklisted somewhere else)
#
alias pnp:dPNP0510 irtty-sir
alias pnp:dPNP0511 irtty-sir
alias pnp:dPNP0700 floppy
alias pnp:dPNP0800 pcspkr
alias pnp:dPNP0b00 rtc
alias pnp:dPNP0303 atkbd
alias pnp:dPNP0f13 psmouse
alias pnp:dPNPb02f analog

### update-modules: end processing /etc/modprobe.d/pnp-aliases.conf

### update-modules: start processing /etc/modprobe.d/ppp.conf
alias char-major-108	ppp_generic
alias /dev/ppp		ppp_generic
alias tty-ldisc-3	ppp_async
alias tty-ldisc-13	n_hdlc
alias tty-ldisc-14	ppp_synctty
alias ppp-compress-18	ppp_mppe
alias ppp-compress-21	bsd_comp
alias ppp-compress-24	ppp_deflate
alias ppp-compress-26	ppp_deflate
alias net-pf-24		pppoe
### update-modules: end processing /etc/modprobe.d/ppp.conf