dmesg

dmesg (text/plain), 34.03 KB, created by Pacho Ramos on 2010-08-31 19:20:27 UTC

Linux version 2.6.35-tuxonice-r1 (root@belkin) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #1 SMP PREEMPT Tue Aug 31 21:04:31 CEST 2010
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
 BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data)
 BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x3ffd0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask FC0000000 write-back
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
initial memory mapped : 0 - 01a00000
init_memory_mapping: 0000000000000000-0000000037bfe000
 0000000000 - 0000200000 page 4k
 0000200000 - 0037a00000 page 2M
 0037a00000 - 0037bfe000 page 4k
kernel direct mapping tables up to 37bfe000 @ 15000-1a000
ACPI: RSDP 000f79b0 00014 (v00 ACPIAM)
ACPI: RSDT 3ffd0000 00038 (v01 A M I  OEMRSDT  04000626 MSFT 00000097)
ACPI: FACP 3ffd0200 00084 (v02 A M I  OEMFACP  04000626 MSFT 00000097)
ACPI: DSDT 3ffd0460 07C97 (v01  A6JC0 A6JC0211 00000211 INTL 02002026)
ACPI: FACS 3ffde000 00040
ACPI: APIC 3ffd0390 0005C (v01 A M I  OEMAPIC  04000626 MSFT 00000097)
ACPI: MCFG 3ffd03f0 0003C (v01 A M I  OEMMCFG  04000626 MSFT 00000097)
ACPI: BOOT 3ffd0430 00028 (v01 A M I  OEMBOOT  04000626 MSFT 00000097)
ACPI: OEMB 3ffde040 00046 (v01 A M I  AMI_OEM  04000626 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
131MB HIGHMEM available.
891MB LOWMEM available.
  mapped low ram: 0 - 37bfe000
  low ram: 0 - 37bfe000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x00037bfe
  HighMem  0x00037bfe -> 0x0003ffd0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0003ffd0
On node 0 totalpages: 261983
free_area_init_node: node 0, pgdat c1485a00, node_mem_map c1539200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1752 pages used for memmap
  Normal zone: 222502 pages, LIFO batch:31
  HighMem zone: 264 pages used for memmap
  HighMem zone: 33482 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:bee00000)
setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
early_res array is doubled to 64 at [16000 - 167ff]
PERCPU: Embedded 13 pages/cpu @c1e00000 s29696 r0 d23552 u1048576
pcpu-alloc: s29696 r0 d23552 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259935
Kernel command line: root=/dev/sda1 resume=/dev/sda3 vga=0x318 video=vesafb:mtrr:3,1024x768-32@60,ywrap quiet
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Subtract (40 early reservations)
  #1 [0000001000 - 0000002000]   EX TRAMPOLINE
  #2 [0001000000 - 0001529738]   TEXT DATA BSS
  #3 [000009fc00 - 0000100000]   BIOS reserved
  #4 [000152a000 - 0001537138]             BRK
  #5 [0000010000 - 0000011000]      TRAMPOLINE
  #6 [0000011000 - 0000015000]     ACPI WAKEUP
  #7 [0000015000 - 0000016000]         PGTABLE
  #8 [0001538000 - 0001539000]         BOOTMEM
  #9 [0001539000 - 0001d39000]         BOOTMEM
  #10 [0001529780 - 0001529784]         BOOTMEM
  #11 [0001529800 - 00015298c0]         BOOTMEM
  #12 [0001529900 - 0001529954]         BOOTMEM
  #13 [0001d39000 - 0001d3c000]         BOOTMEM
  #14 [0001529980 - 0001529990]         BOOTMEM
  #15 [0001537180 - 0001537d80]         BOOTMEM
  #16 [0001529a00 - 0001529a2f]         BOOTMEM
  #17 [0001529a80 - 0001529bc4]         BOOTMEM
  #18 [0001529c00 - 0001529c40]         BOOTMEM
  #19 [0001529c80 - 0001529cc0]         BOOTMEM
  #20 [0001529d00 - 0001529d40]         BOOTMEM
  #21 [0001529d80 - 0001529dc0]         BOOTMEM
  #22 [0001529e00 - 0001529e40]         BOOTMEM
  #23 [0001529e80 - 0001529ec0]         BOOTMEM
  #24 [0001529f00 - 0001529f40]         BOOTMEM
  #25 [0001529f80 - 0001529fc0]         BOOTMEM
  #26 [0001537d80 - 0001537d90]         BOOTMEM
  #27 [0001537e00 - 0001537e59]         BOOTMEM
  #28 [0001537e80 - 0001537ed9]         BOOTMEM
  #29 [0001e00000 - 0001e0d000]         BOOTMEM
  #30 [0001f00000 - 0001f0d000]         BOOTMEM
  #31 [0001537f00 - 0001537f04]         BOOTMEM
  #32 [0001537f80 - 0001537f84]         BOOTMEM
  #33 [0001d3e000 - 0001d3e008]         BOOTMEM
  #34 [0001d3e080 - 0001d3e088]         BOOTMEM
  #35 [0001d3e100 - 0001d3e1a0]         BOOTMEM
  #36 [0001d3e200 - 0001d3e248]         BOOTMEM
  #37 [0001d3e280 - 0001d42280]         BOOTMEM
  #38 [0001d42280 - 0001dc2280]         BOOTMEM
  #39 [0001e0d000 - 0001e4d000]         BOOTMEM
Initializing HighMem for node 0 (00037bfe:0003ffd0)
Memory: 1033464k/1048384k available (3415k kernel code, 14468k reserved, 1228k data, 348k init, 134984k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff8f000 - 0xfffff000   ( 448 kB)
    pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
    vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
      .init : 0xc148a000 - 0xc14e1000   ( 348 kB)
      .data : 0xc1355f01 - 0xc1489244   (1228 kB)
      .text : 0xc1000000 - 0xc1355f01   (3415 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptable hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
	Verbose stalled-CPUs detection is disabled.
NR_IRQS:320
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 1662.170 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.34 BogoMIPS (lpj=1662170)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Core events, core PMU driver.
... version:                1
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   0
... event mask:             0000000000000003
ACPI: Core revision 20100428
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Genuine Intel(R) CPU           T2300  @ 1.66GHz stepping 08
Booting Node   0, Processors  #1 Ok.
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (6648.90 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 3ffd8100 002B7 (v01    AMI   CPU1PM 00000001 INTL 02002026)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 002B7 (v01    AMI   CPU1PM 00000001 INTL 02002026)
ACPI Warning: Incorrect checksum in table [SSDT] - 0xCB, should be 0xEB (20100428/tbutils-314)
ACPI: SSDT 3ffd83c0 002B7 (v01    AMI   CPU2PM 00000001 INTL 02002026)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 002B7 (v01    AMI   CPU2PM 00000001 INTL 02002026)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!)
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: Power Resource [GFAN] (off)
ACPI Warning: Incorrect checksum in table [SSDT] - 0xCB, should be 0xEB (20100428/tbutils-314)
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xffffffff] (ignored)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0xec00-0xec1f]
pci 0000:00:1d.1: reg 20: [io  0xe880-0xe89f]
pci 0000:00:1d.2: reg 20: [io  0xe800-0xe81f]
pci 0000:00:1d.3: reg 20: [io  0xe480-0xe49f]
pci 0000:00:1d.7: reg 10: [mem 0xfebfbc00-0xfebfbfff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0250 (mask 000f)
pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io  0x08f0-0x08f7]
pci 0000:00:1f.1: reg 1c: [io  0x08f8-0x08fb]
pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0xfbfe0000-0xfbffffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:01.0:   bridge window [mem 0xf9f00000-0xfdffffff]
pci 0000:00:01.0:   bridge window [mem 0xbdf00000-0xddefffff 64bit pref]
pci 0000:02:00.0: reg 10: [io  0xc800-0xc8ff]
pci 0000:02:00.0: reg 18: [mem 0xfe0ff000-0xfe0fffff 64bit]
pci 0000:02:00.0: reg 30: [mem 0xfe0e0000-0xfe0effff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.0:   bridge window [mem 0xfe000000-0xfe0fffff]
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xfe1ff000-0xfe1fffff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.3: PCI bridge to [bus 03-03]
pci 0000:00:1c.3:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.3:   bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:01.0: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:04:01.0: supports D1 D2
pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:01.0: PME# disabled
pci 0000:04:01.1: reg 10: [mem 0xfeaff800-0xfeafffff]
pci 0000:04:01.1: PME# supported from D0 D3hot D3cold
pci 0000:04:01.1: PME# disabled
pci 0000:04:01.2: reg 10: [mem 0xfeaff400-0xfeaff4ff]
pci 0000:04:01.2: supports D1 D2
pci 0000:04:01.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:01.2: PME# disabled
pci 0000:04:01.3: reg 10: [mem 0xfeaff000-0xfeaff0ff]
pci 0000:04:01.3: supports D1 D2
pci 0000:04:01.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:01.3: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 04-05] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem 0xfe200000-0xfeafffff]
pci 0000:00:1e.0:   bridge window [mem 0xddf00000-0xdfefffff 64bit pref]
pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode)
pci_bus 0000:05: [bus 05-08] partially hidden behind transparent bridge 0000:04 [bus 04-05]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 12)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
reserve RAM buffer: 000000003ffd0000 - 000000003fffffff 
hpet clockevent registered
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
system 00:08: [io  0x04d0-0x04d1] has been reserved
system 00:08: [io  0x0800-0x087f] has been reserved
system 00:08: [io  0x0480-0x04bf] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:09: [mem 0xfff80000-0xffffffff] has been reserved
system 00:0a: [mem 0xffc00000-0xfff7ffff] has been reserved
system 00:0b: [io  0x0400-0x041f] has been reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: [mem 0xfec10000-0xfec17fff] has been reserved
system 00:0b: [mem 0xfec28000-0xfec2ffff] has been reserved
system 00:0c: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0x3fffffff] could not be reserved
pci 0000:00:1c.0: BAR 9: assigned [mem 0x40000000-0x401fffff 64bit pref]
pci 0000:00:1c.3: BAR 9: assigned [mem 0x40200000-0x403fffff 64bit pref]
pci 0000:00:1c.3: BAR 7: assigned [io  0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  disabled]
pci 0000:00:01.0:   bridge window [mem 0xf9f00000-0xfdffffff]
pci 0000:00:01.0:   bridge window [mem 0xbdf00000-0xddefffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.0:   bridge window [mem 0xfe000000-0xfe0fffff]
pci 0000:00:1c.0:   bridge window [mem 0x40000000-0x401fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 03-03]
pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.3:   bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:1c.3:   bridge window [mem 0x40200000-0x403fffff 64bit pref]
pci 0000:04:01.0: BAR 9: assigned [mem 0x44000000-0x47ffffff pref]
pci 0000:04:01.0: BAR 10: assigned [mem 0x48000000-0x4bffffff]
pci 0000:04:01.0: BAR 0: assigned [mem 0xfe200000-0xfe200fff]
pci 0000:04:01.0: BAR 0: set to [mem 0xfe200000-0xfe200fff] (PCI address [0xfe200000-0xfe200fff]
pci 0000:04:01.0: BAR 7: assigned [io  0xd000-0xd0ff]
pci 0000:04:01.0: BAR 8: assigned [io  0xd400-0xd4ff]
pci 0000:04:01.0: CardBus bridge to [bus 05-08]
pci 0000:04:01.0:   bridge window [io  0xd000-0xd0ff]
pci 0000:04:01.0:   bridge window [io  0xd400-0xd4ff]
pci 0000:04:01.0:   bridge window [mem 0x44000000-0x47ffffff pref]
pci 0000:04:01.0:   bridge window [mem 0x48000000-0x4bffffff]
pci 0000:00:1e.0: PCI bridge to [bus 04-05]
pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem 0xfe200000-0xfeafffff]
pci 0000:00:1e.0:   bridge window [mem 0xddf00000-0xdfefffff 64bit pref]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.3: enabling device (0106 -> 0107)
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:01: resource 1 [mem 0xf9f00000-0xfdffffff]
pci_bus 0000:01: resource 2 [mem 0xbdf00000-0xddefffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xfe000000-0xfe0fffff]
pci_bus 0000:02: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:03: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfe200000-0xfeafffff]
pci_bus 0000:04: resource 2 [mem 0xddf00000-0xdfefffff 64bit pref]
pci_bus 0000:04: resource 4 [io  0x0000-0xffff]
pci_bus 0000:04: resource 5 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:05: resource 0 [io  0xd000-0xd0ff]
pci_bus 0000:05: resource 1 [io  0xd400-0xd4ff]
pci_bus 0000:05: resource 2 [mem 0x44000000-0x47ffffff pref]
pci_bus 0000:05: resource 3 [mem 0x48000000-0x4bffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Simple Boot Flag at 0x52 set to 0x1
highmem bounce pool size: 64 pages
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 [e-mail]).
fuse init (API version 7.14)
msgmni has been set to 1754
io scheduler noop registered
io scheduler deadline registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.3: setting latency timer to 64
vesafb: framebuffer at 0xc0000000, mapped to 0xf8480000, using 6144k, total 131072k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:d740
vesafb: pmi: set display start = c00cd776, set palette = c00cd7e0
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=1536
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [AC0] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Fan [FN00] (off)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input4
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
ACPI: acpi_idle registered with cpuidle
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (67 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
ata2: port disabled. ignoring.
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
i2c /dev entries driver
coretemp coretemp.0: Unable to read TjMax from CPU.
coretemp coretemp.0: TjMax is assumed as 100 C!
coretemp coretemp.1: Unable to read TjMax from CPU.
coretemp coretemp.1: TjMax is assumed as 100 C!
cpuidle: using governor ladder
cpuidle: using governor menu
asus_laptop: Asus Laptop Support version 0.42
asus_laptop:   A6JC model detected
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
ata1.00: ATA-7: FUJITSU MHV2100AT PL, 000000A0, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA 
ata1.01: ATAPI: TSSTcorpCD/DVDW TS-L532U, AS04, max UDMA/33
input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input6
Registered led device: asus::mail
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
TuxOnIce 3.1.1.1 (http://tuxonice.net)
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/33
ACPI: Battery Slot [BAT0] (battery present)
scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2100A 0000 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
scsi 0:0:1:0: CD-ROM            TSSTcorp CD/DVDW TS-L532U AS04 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
sr 0:0:1:0: Attached scsi generic sg1 type 5
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008/0x0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
TuxOnIce: No image found.
registered taskstats version 1
REISERFS (device sda1): found reiserfs format "3.6" with standard journal
REISERFS (device sda1): using ordered data mode
REISERFS (device sda1): journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sda1): checking transaction log (sda1)
REISERFS (device sda1): Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly on device 8:1.
Freeing unused kernel memory: 348k freed
udev: starting version 151
intel_rng: FWH not detected
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
cfg80211: Calling CRDA to update world regulatory domain
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ec00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.35-tuxonice-r1 uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.35-tuxonice-r1 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.35-tuxonice-r1 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000e480
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.35-tuxonice-r1 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebfbc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.35-tuxonice-r1 ehci_hcd
usb usb5: SerialNumber: 0000:00:1d.7
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
firewire_ohci 0000:04:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: no MSI. Back to INTx.
r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xf8e4e000, 00:17:31:15:5a:78, XID 10000000 IRQ 16
firewire_ohci: Added fw-ohci device 0000:04:01.1, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x0
sdhci-pci 0000:04:01.2: SDHCI controller found [1180:0822] (rev 17)
sdhci-pci 0000:04:01.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
sdhci-pci 0000:04:01.2: Will use DMA mode even though HW doesn't fully claim to support it.
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:04:01.2] using DMA
yenta_cardbus 0000:04:01.0: CardBus bridge found [1043:1237]
yenta_cardbus 0000:04:01.0: ISA IRQ mask 0x0cb8, PCI irq 17
yenta_cardbus 0000:04:01.0: Socket status: 30000006
pci_bus 0000:04: Raising subordinate bus# of parent bus (#04) from #05 to #08
yenta_cardbus 0000:04:01.0: pcmcia: parent PCI bridge window: [io  0xd000-0xdfff]
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd000-0xdfff: excluding 0xd000-0xd0ff 0xd3b0-0xd3df 0xd400-0xd4ff 0xd7b0-0xd7df 0xdbb0-0xdbdf 0xdfb0-0xdfdf
yenta_cardbus 0000:04:01.0: pcmcia: parent PCI bridge window: [mem 0xfe200000-0xfeafffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xfe200000-0xfeafffff: excluding 0xfe200000-0xfe28ffff 0xfea70000-0xfeafffff
yenta_cardbus 0000:04:01.0: pcmcia: parent PCI bridge window: [mem 0xddf00000-0xdfefffff 64bit pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xddf00000-0xdfefffff: excluding 0xddf00000-0xdfefffff
usb 5-7: new high speed USB device using ehci_hcd and address 3
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
iwl3945: Copyright(c) 2003-2010 Intel Corporation
iwl3945 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
iwl3945 0000:03:00.0: setting latency timer to 64
usb 5-7: New USB device found, idVendor=0402, idProduct=5602
usb 5-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-7: Product: USB2.0 Camera
iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
firewire_core: created device fw0: GUID 00e01800035307db, S400
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: setting latency timer to 64
usb 1-1: new low speed USB device using uhci_hcd and address 2
usb 1-1: New USB device found, idVendor=15ca, idProduct=00c3
usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1: Product: USB Optical Mouse
phy0: Selected rate control algorithm 'iwl-3945-rs'
Linux video capture interface: v2.00
usbcore: registered new interface driver hiddev
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input8
generic-usb 0003:15CA:00C3.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
gspca: main v2.9.0 registered
gspca: probing 0402:5602
ALi m5602: Probing for a po1030 sensor
ALi m5602: Probing for a mt9m111 sensor
ALi m5602: Probing for a s5k4aa sensor
ALi m5602: Probing for an ov9650 sensor
ALi m5602: Detected an ov9650 sensor
gspca: video0 created
usbcore: registered new interface driver ALi m5602
ALi m5602: registered
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86 Kernel Module  195.36.24  Thu Apr 22 09:18:20 PDT 2010
REISERFS (device sda2): found reiserfs format "3.6" with standard journal
REISERFS (device sda2): using ordered data mode
REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sda2): checking transaction log (sda2)
REISERFS (device sda2): Using r5 hash to sort names
REISERFS (device sda4): found reiserfs format "3.6" with standard journal
REISERFS (device sda4): using ordered data mode
REISERFS (device sda4): journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sda4): checking transaction log (sda4)
REISERFS (device sda4): Using r5 hash to sort names
Adding 1052252k swap on /dev/sda3.  Priority:-1 extents:1 across:1052252k 
r8169 0000:02:00.0: eth0: link down
iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
wlan0: deauthenticating from 00:0c:f6:1d:c9:e8 by local choice (reason=3)
wlan0: authenticate with 00:0c:f6:1d:c9:e8 (try 1)
wlan0: authenticated
wlan0: associate with 00:0c:f6:1d:c9:e8 (try 1)
wlan0: RX AssocResp from 00:0c:f6:1d:c9:e8 (capab=0x431 status=0 aid=2)
wlan0: associated