--- alsa-guide.xml.orig	2009-08-05 18:29:16.000000000 +0300
+++ alsa-guide.xml	2009-08-05 18:31:18.000000000 +0300
@@ -295,7 +295,7 @@
 You will now see a neat menu guided interface that will automatically probe
 your devices and try to find out your sound card. You will be asked to pick
 your sound card from a list. Once that's done, it will ask you permission to
-automatically make required changes to <path>/etc/modules.d/alsa</path>.
+automatically make required changes to <path>/etc/modprobe.d/alsa.conf</path>.
 It will then adjust your volume settings to optimum levels, run
 <c>update-modules</c> and start the <path>/etc/init.d/alsasound</path> service.
 Once <c>alsaconf</c> exits, you can proceed with setting up the ALSA
@@ -617,7 +617,7 @@
 
 <p>
 Another reason for error messages similar to the ones above could be a file in
-<path>/etc/modules.d</path> supplying a <c>device_mode</c> parameter when it
+<path>/etc/modprobe.d</path> supplying a <c>device_mode</c> parameter when it
 isn't required. Confirm that this is indeed the issue and find out which file
 is the culprit.
 </p>
@@ -627,7 +627,7 @@
 # <i>dmesg | grep device_mode</i>
 snd: Unknown parameter `device_mode'
 <comment>(Now, to get to the source of the issue)</comment>
-# <i>grep device_mode /etc/modules.d/*</i>
+# <i>grep device_mode /etc/modprobe.d/*</i>
 </pre>
 
 <p>
@@ -783,12 +783,12 @@
 <p>
 You can have more than one sound card in your system simultaneously, provided
 that you have built ALSA as modules in your kernel. You just need to specify
-which should be started first in <path>/etc/modules.d/alsa</path>. Your cards
+which should be started first in <path>/etc/modprobe.d/alsa.conf</path>. Your cards
 are identified by their driver names inside this file. 0 is the first card, 1 is
 the second, and so on. Here's an example for a system with two sound cards.
 </p>
 
-<pre caption="Two sound cards in /etc/modules.d/alsa">
+<pre caption="Two sound cards in /etc/modprobe.d/alsa.conf">
 options snd-emu10k1 index=0
 options snd-via82xx index=1
 </pre>
@@ -799,7 +799,7 @@
 sound cards, two of which are the same Intel High Definition Audio card.
 </p>
 
-<pre caption="Multiple sound cards in /etc/modules.d/alsa">
+<pre caption="Multiple sound cards in /etc/modprobe.d/alsa.conf">
 options snd-ymfpci index=0
 options snd-hda-intel index=1,2
 </pre>