[patch] hplip-2.8.7-3.9.2.ebuild.diff - second edition

hplip-2.8.7-3.9.2.ebuild.diff (text/plain), 8.02 KB, created by Yar Odin on 2009-02-21 17:39:39 UTC

--- hplip-2.8.7.ebuild	2008-08-17 18:46:53.000000000 +0600
+++ hplip-3.9.2.ebuild	2009-02-21 22:12:15.000000000 +0500
@@ -1,24 +1,27 @@
-# Copyright 1999-2008 Gentoo Foundation
+# Copyright 1999-2009 Gentoo Foundation
 # Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-print/hplip/hplip-2.8.7.ebuild,v 1.1 2008/08/17 12:46:53 calchan Exp $
+# $Header: $
 
-inherit eutils linux-info python
+EAPI="1"
+
+inherit eutils flag-o-matic fdo-mime linux-info python
+
+IUSE="cupsddk dbus doc fax gtk minimal parport ppds plugins qt3 qt4 scanner snmp"
 
 DESCRIPTION="HP Linux Imaging and Printing System. Includes net-print/hpijs, scanner drivers and service tools."
 HOMEPAGE="http://hplip.sourceforge.net/"
-SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz"
+SRC_URI="plugins? ( http://www.linuxprinting.org/download/printdriver/auxfiles/HP/plugins/hplip-${PV}-plugin.run )
+	mirror://sourceforge/hplip/${P}.tar.gz"
 
 LICENSE="GPL-2"
 SLOT="0"
 KEYWORDS="~amd64 ~ppc ~ppc64 ~x86"
 
-IUSE="cupsddk dbus doc fax gtk minimal parport ppds qt3 qt4 scanner snmp"
-
 DEPEND="!net-print/hpijs
 	!net-print/hpoj
 	virtual/ghostscript
 	>=media-libs/jpeg-6b
-	>=net-print/foomatic-filters-3.0.20080507
+	>=net-print/foomatic-filters-3.0
 	!minimal? (
 		>=net-print/cups-1.2
 		dev-libs/libusb
@@ -32,6 +35,7 @@
 	)"
 
 RDEPEND="${DEPEND}
+	app-arch/gzip
 	!minimal? (
 		!<sys-fs/udev-114
 		scanner? (
@@ -54,6 +58,7 @@
 
 CONFIG_CHECK="PARPORT PPDEV"
 ERROR_PARPORT="Please make sure parallel port support is enabled in your kernel (PARPORT and PPDEV)."
+RESTRICT="plugins? ( strip )"
 
 pkg_setup() {
 	! use qt3 && ! use qt4 && ewarn "You need USE=qt3 (recommended) or USE=qt4 for the hplip GUI."
@@ -74,9 +79,20 @@
 }
 
 src_unpack() {
-	unpack ${A}
+	unpack ${P}.tar.gz
+
+	if use plugins; then
+	    echo ">>> Unpacking hplip-${PV}-plugin.tar.gz to ${WORKDIR}/plugins"
+	    mkdir -p "${WORKDIR}"/plugins
+	    cd "${WORKDIR}"/plugins
+	    tail -c +9523 "${DISTDIR}"/hplip-${PV}-plugin.run > hplip-${PV}-plugin.tar.gz
+	    tar xf "${WORKDIR}"/plugins/hplip-${PV}-plugin.tar.gz
+	    rm -f "${WORKDIR}"/plugins/hplip-${PV}-plugin.tar.gz
+	fi
+
 	cd "${S}"
 
+	sed -i -e "s:\/usr\/share\/hal\/fdi\/preprobe\/10osvendor:\/etc\/hal\/fdi\/preprobe:g" Makefile.in || die "Patching hplip.list.in failed"
 	sed -i -e "s:\$(doc_DATA)::" Makefile.in || die "Patching Makefile.in failed"
 	sed -i -e "s/'skipstone']/'skipstone', 'epiphany']/" \
 		-e "s/'skipstone': ''}/'skipstone': '', 'epiphany': '--new-window'}/" \
@@ -85,19 +101,19 @@
 	# bug 98428
 	sed -i -e "s:/usr/bin/env python:/usr/bin/python:g" hpssd.py || die "Patching hpssd.py failed"
 
-	# Force recognition of Gentoo distro by hp-check
+	# Force recognition of Gentoo distro by hp-check and Gentoo based pathes
 	sed -i \
 		-e "s:file('/etc/issue', 'r').read():'Gentoo':" \
 		installer/core_install.py || die "sed core_install.py"
+	sed -i \
+		-e s:\/usr\/lib\/cups\/driver:$(cups-config --serverbin)\/driver:g \
+		installer/core_install.py || die "sed core_install.py"
 
 	# Replace udev rules, see bug #197726.
 	rm data/rules/55-hpmud.rules
 	cp "${FILESDIR}"/70-hpmud.rules data/rules
 	sed -i -e "s/55-hpmud.rules/70-hpmud.rules/g" Makefile.* */*.html || die "sed failed"
 
-	# Use system foomatic-rip instead of foomatic-rip-hplip
-	sed -i -e 's/foomatic-rip-hplip/foomatic-rip/' ppd/*.ppd || die "sed failed"
-
 	# Qt4 is still undocumented by upstream, so use with caution
 	local QT_VER
 	use qt4 && QT_VER="4"
@@ -118,8 +134,10 @@
 		local GUI_BUILD="--disable-gui-build"
 	fi
 
+	use qt4 && GUI_BUILD="$GUI_BUILD --enable-qt4 --disable-qt3"
+
 	econf \
-		--disable-dependency-tracking \
+		--enable-dependency-tracking \
 		--disable-cups11-build \
 		--with-cupsbackenddir=$(cups-config --serverbin)/backend \
 		--with-cupsfilterdir=$(cups-config --serverbin)/filter \
@@ -134,18 +152,87 @@
 		$(use_enable ppds foomatic-ppd-install) \
 		$(use_enable scanner scan-build) \
 		$(use_enable snmp network-build) \
+		--with-systraydir=/usr/share/autostart \
 		|| die "econf failed"
 	emake || die "Compilation failed"
 }
 
 src_install() {
-	emake -j1 DESTDIR="${D}" install || die "emake install failed"
+	replace-flags "-j?" "-j1"
+	emake DESTDIR="${D}" install || die "emake install failed"
 	rm -f "${D}"/etc/sane.d/dll.conf
 
+	# Use system foomatic-rip instead of foomatic-rip-hplip
+	local i
+	for i in "${D}"usr/share/ppd/HP/*.ppd
+	do
+	    sed -i -e "s/foomatic-rip-hplip/foomatic-rip/g" $i || die "*.ppd sed failed"
+	    rm -f $i.gz
+	done
+
+	if use plugins; then
+	    sed -i -e "s:SYSFS:ATTRS:g" "${WORKDIR}"/plugins/*.rules || die "sed failed"
+
+	    insinto /etc/udev/rules.d
+	    doins "${WORKDIR}"/plugins/86-hpmud-hp_laserjet_1000.rules
+	    doins "${WORKDIR}"/plugins/86-hpmud-hp_laserjet_1005_series.rules
+	    doins "${WORKDIR}"/plugins/86-hpmud-hp_laserjet_1018.rules
+	    doins "${WORKDIR}"/plugins/86-hpmud-hp_laserjet_1020.rules
+	    doins "${WORKDIR}"/plugins/86-hpmud-hp_laserjet_p1005.rules
+	    doins "${WORKDIR}"/plugins/86-hpmud-hp_laserjet_p1006.rules
+	    doins "${WORKDIR}"/plugins/86-hpmud-hp_laserjet_p1007.rules
+	    doins "${WORKDIR}"/plugins/86-hpmud-hp_laserjet_p1008.rules
+	    doins "${WORKDIR}"/plugins/86-hpmud-hp_laserjet_p1505.rules
+
+	    # detect ARCH variable
+	    if [[ "${ARCH}" == "amd64" ]] ; then
+		arch_var="64"
+	    else
+		arch_var="32"
+	    fi
+	    cd "${D}"/usr/lib
+	    dodir /usr/share/hplip/scan/plugins
+	    dolib.so "${WORKDIR}"/plugins/bb_marvell-x86_"${arch_var}".so
+	    ln -s bb_marvell-x86_"${arch_var}".so bb_marvell.so
+	    dosym /usr/lib/bb_marvell-x86_"${arch_var}".so /usr/share/hplip/scan/plugins/bb_marvell.so
+	    dosym /usr/lib/bb_marvell-x86_"${arch_var}".so /usr/share/hplip/scan/plugins/bb_marvell-x86_"${arch_var}".so
+	    dolib.so "${WORKDIR}"/plugins/bb_soap-x86_"${arch_var}".so
+	    ln -s bb_soap-x86_"${arch_var}".so bb_soap.so
+	    dosym /usr/lib/bb_soap-x86_"${arch_var}".so /usr/share/hplip/scan/plugins/bb_soap.so
+	    dosym /usr/lib/bb_soap-x86_"${arch_var}".so /usr/share/hplip/scan/plugins/bb_soap-x86_"${arch_var}".so
+	    dolib.so "${WORKDIR}"/plugins/bb_soapht-x86_"${arch_var}".so
+	    ln -s bb_soapht-x86_"${arch_var}".so bb_soapht.so
+	    dosym /usr/lib/bb_soapht-x86_"${arch_var}".so /usr/share/hplip/scan/plugins/bb_soapht.so
+	    dosym /usr/lib/bb_soapht-x86_"${arch_var}".so /usr/share/hplip/scan/plugins/bb_soapht-x86_"${arch_var}".so
+	    dodir /usr/share/hplip/prnt/plugins
+	    dolib.so "${WORKDIR}"/plugins/lj-x86_"${arch_var}".so
+	    ln -s lj-x86_"${arch_var}".so lj.so
+	    dosym /usr/lib/lj-x86_"${arch_var}".so /usr/share/hplip/prnt/plugins/lj.so
+	    dosym /usr/lib/lj-x86_"${arch_var}".so /usr/share/hplip/prnt/plugins/lj-x86_"${arch_var}".so
+
+	    dodir /usr/share/hplip/data/plugins
+	    insinto /usr/share/hplip/data/plugins
+	    doins "${WORKDIR}"/plugins/license.txt
+
+	    dodir /usr/share/hplip/data/firmware
+	    insinto /usr/share/hplip/data/firmware
+	    doins "${WORKDIR}"/plugins/hp_laserjet_1000.fw.gz
+	    doins "${WORKDIR}"/plugins/hp_laserjet_1005_series.fw.gz
+	    doins "${WORKDIR}"/plugins/hp_laserjet_1018.fw.gz
+	    doins "${WORKDIR}"/plugins/hp_laserjet_1020.fw.gz
+	    doins "${WORKDIR}"/plugins/hp_laserjet_p1005.fw.gz
+	    doins "${WORKDIR}"/plugins/hp_laserjet_p1006.fw.gz
+	    doins "${WORKDIR}"/plugins/hp_laserjet_p1007.fw.gz
+	    doins "${WORKDIR}"/plugins/hp_laserjet_p1008.fw.gz
+	    doins "${WORKDIR}"/plugins/hp_laserjet_p1505.fw.gz
+	    sed -i -e "s:version\=\(.*\):version\=\1\nplugin\=1:" "${D}"/etc/hp/hplip.conf || die "sed failed"
+	fi
+
 	# bug 106035
 	use qt3 || use qt4 || rm -Rf "${D}"/usr/share/applications
 
 	use minimal && rm -rf "${D}"/usr/lib
+
 }
 
 pkg_preinst() {
@@ -157,6 +244,7 @@
 
 pkg_postinst() {
 	python_mod_optimize /usr/share/${PN}
+	fdo-mime_desktop_database_update
 
 	elog "You should run hp-setup as root if you are installing hplip for the first time, and may also"
 	elog "need to run it if you are upgrading from an earlier version."
@@ -169,4 +257,5 @@
 
 pkg_postrm() {
 	python_mod_cleanup /usr/share/${PN}
+	fdo-mime_desktop_database_update
 }