2.6.28+patches panic on boot

2.6.28_panic_on_boot.log (text/plain), 7.35 KB, created by Tobias Klausmann (RETIRED) on 2009-01-11 11:56:35 UTC

aboot> b 2/boot/vmlinuz-2.6.28 root=/dev/hda2 console=ttyS0          
aboot: loading uncompressed boot/vmlinuz-2.6.28...         
aboot: loading compressed boot/vmlinuz-2.6.28...  
aboot: PHDR 0 vaddr 0xfffffc0000310000 offset 0x100 size 0x45fe4c
aboot: bss at 0xfffffc000076fe4c, size 0x57654                   
aboot: zero-filling 357972 bytes at 0xfffffc000076fe4c
aboot: starting kernel boot/vmlinuz-2.6.28 with arguments root=/dev/hda2 console=ttyS0
Linux version 2.6.28 (root@sheldon) (gcc version 4.3.2 (Gentoo 4.3.2-r2 p1.5, pie-10.1.5) ) #1 Sun Jan 11 12:34:54 CET 2009
Booting on Nautilus using machine vector Nautilus from SRM
Major Options: EV67 LEGACY_START VERBOSE_MCHECK MAGIC_SYSRQ 
Command line: root=/dev/hda2 console=ttyS0
memcluster 0, usage 1, start        0, end      256
memcluster 1, usage 0, start      256, end   130994
memcluster 2, usage 1, start   130994, end   131072
memcluster 3, usage 0, start   131072, end   262142
memcluster 4, usage 1, start   262142, end   262144
freeing pages 256:384
freeing pages 998:130994
freeing pages 131072:262142
reserving pages 998:1002
8192K Bcache detected; load hit latency 18 cycles, load miss latency 158 cycles
Iron stat_cmd 22100006
Iron ECC f00
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260350
Kernel command line: root=/dev/hda2 console=ttyS0
PID hash table entries: 4096 (order: 12, 32768 bytes)
HWRPB cycle frequency bogus.  Estimated 796418574 Hz
Using epoch = 2000
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 262144 (order: 8, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 7, 1048576 bytes)
Memory: 2071216k/2097136k available (3122k kernel code, 22632k reserved, 251k data, 144k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 1586.36 BogoMIPS (lpj=774144)
Mount-cache hash table entries: 512
net_namespace: 536 bytes
NET: Registered protocol family 16
pci 0000:00:03.0: PME# supported from D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:06.0: PME# supported from D2 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:11.0: quirk: region 4000-403f claimed by ali7101 ACPI
pci 0000:00:11.0: quirk: region 5000-501f claimed by ali7101 SMB
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: disabled
pci 0000:00:01.0:   MEM window: 0xf2000000-0xf2ffffff
pci 0000:00:01.0:   PREFETCH window: 0x000000f4000000-0x000000ffffffff
SCSI subsystem initialized
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 524288 bytes)
TCP established hash table entries: 262144 (order: 9, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 6, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
srm_env: version 0.0.6 loaded successfully
msgmni has been set to 4046
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci 0000:00:07.0: Activating ISA DMA hang workarounds
nvidiafb: Device ID: 10de0110 
nvidiafb: EDID found from BUS1
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
nvidiafb: Unable to detect which CRTCNumber...
...Defaulting to CRTCNumber 0
nvidiafb: Using CRT on CRTC 0
Console: switching to colour frame buffer device 200x75
nvidiafb: PCI nVidia NV11 framebuffer (32MB @ 0xF8000000)
Linux agpgart interface v0.103
agpgart-amdk7 0000:00:00.0: AMD 761 chipset
------------[ cut here ]------------
WARNING: at mm/vmalloc.c:104 vmap_page_range+0x1b8/0x320()
Modules linked in:
fffffc007f03b968 0000000000000003 fffffc0000377e08 fffffffc00002000 
       fffffffc00008000 0000000000000003 6761705f70616d76 2b65676e61725f65 
       78302f3862317830 0000000000303233 fffffc000074fc60 0000000000000000 
       fffffc000074f110 fffffc000074f110 fffffc000074fc68 0000000000000000 
       0000000000000000 fffffc000074f150 0000000000000001 00000000000200d2 
       0000000000000000 0000000000000000 0000000000000001 0000000000000044 
Trace:
[<fffffc0000377e08>] vmap_page_range+0x1b8/0x320
[<fffffc0000379248>] __vmalloc_area_node+0xb8/0x1b0
[<fffffc0000377fa4>] map_vm_area+0x34/0x60
[<fffffc00003792e0>] __vmalloc_area_node+0x150/0x1b0
[<fffffc000037928c>] __vmalloc_area_node+0xfc/0x1b0
[<fffffc00004d7d24>] agp_add_bridge+0x1a4/0x610
[<fffffc000060f908>] agp_amdk7_probe+0x17c/0x2ec
[<fffffc000049389c>] pci_device_probe+0x8c/0xc0
[<fffffc00004fcb68>] driver_probe_device+0xa8/0x230
[<fffffc00004fcdcc>] __driver_attach+0xdc/0xe0
[<fffffc00004fc048>] bus_for_each_dev+0x78/0xd0
[<fffffc00004fccf0>] __driver_attach+0x0/0xe0
[<fffffc00004fc90c>] driver_attach+0x2c/0x40
[<fffffc00004fb61c>] bus_add_driver+0x28c/0x340
[<fffffc00004fd094>] driver_register+0x94/0x1d0
[<fffffc0000493c04>] __pci_register_driver+0x64/0xf0
[<fffffc0000310084>] do_one_initcall+0x34/0x1e0
[<fffffc00003db5cc>] proc_register+0x6c/0x280
[<fffffc00003db5b0>] proc_register+0x50/0x280
[<fffffc00003db97c>] create_proc_entry+0x7c/0x100
[<fffffc000035593c>] register_irq_proc+0xbc/0xe0
[<fffffc00003559d4>] init_irq_proc+0x74/0xa0
[<fffffc0000311158>] kernel_thread+0x28/0x90

---[ end trace 2eba2bbcc68c9643 ]---
agpgart-amdk7 0000:00:00.0: can't allocate memory for key lists
agpgart-amdk7 0000:00:00.0: agp_backend_initialize() failed
agpgart-amdk7: probe of 0000:00:00.0 failed with error -12
[drm] Initialized drm 1.1.0 20060810
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
tulip0:  EEPROM default media type Autosense.
tulip0:  Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
tulip0:  Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block.
tulip0:  Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block.
tulip0:  Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block.
eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0xf3043000, 00:00:f0:51:19:57, IRQ 11.
Uniform Multi-Platform E-IDE driver
alim15x3 0000:00:10.0: IDE controller (0x10b9:0x5229 rev 0xc4)
alim15x3 0000:00:10.0: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x8880-0x8887
    ide1: BM-DMA at 0x8888-0x888f
hda: Maxtor 4R120L0, ATA DISK drive
hda: UDMA/100 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide-cd driver 5.00
Driver 'sd' needs updating - please use bus_type methods
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <[e-mail]>
All bugs added by David S. Miller <[e-mail]>
atkbd.c: keyboard reset failed on isa0060/serio0
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
input: ImPS/2 Logitech Wheel Mouse as /class/input/input0
VFS: Cannot open root device "hda2" or unknown-block(0,0)
Please append a correct "root=" boot option; here are the available partitions:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)