[patch] ntp-kernel-2.6.26.patch

ntp-kernel-2.6.26.patch (text/plain), 2.52 KB, created by Hal Engel on 2008-09-20 17:05:28 UTC

--- sysdeps/unix/sysv/linux/ntp_gettime.c
+++ sysdeps/unix/sysv/linux/ntp_gettime.c
@@ -38,5 +38,6 @@
   ntv->time = tntx.time;
   ntv->maxerror = tntx.maxerror;
   ntv->esterror = tntx.esterror;
+  ntv->tai = tntx.tai;
   return result;
 }
--- sysdeps/unix/sysv/linux/sys/timex.h
+++ sysdeps/unix/sysv/linux/sys/timex.h
@@ -22,13 +22,16 @@
 #include <features.h>
 #include <sys/time.h>
 
-/* These definitions from linux/timex.h as of 2.2.0.  */
+/* These definitions from linux/timex.h as of 2.6.26.  */
+
+#define NTP_API		4	/* NTP API version */
 
 struct ntptimeval
 {
   struct timeval time;	/* current time (ro) */
   long int maxerror;	/* maximum error (us) (ro) */
   long int esterror;	/* estimated error (us) (ro) */
+  long tai;		/* TAI offset (ro) */
 };
 
 struct timex
@@ -54,10 +57,12 @@
   long int errcnt;	/* calibration errors (ro) */
   long int stbcnt;	/* stability limit exceeded (ro) */
 
+  int tai;		/* TAI offset (ro) */
+
   /* ??? */
   int  :32; int  :32; int  :32; int  :32;
   int  :32; int  :32; int  :32; int  :32;
-  int  :32; int  :32; int  :32; int  :32;
+  int  :32; int  :32; int  :32;
 };
 
 /* Mode codes (timex.mode) */
@@ -67,6 +72,9 @@
 #define ADJ_ESTERROR		0x0008	/* estimated time error */
 #define ADJ_STATUS		0x0010	/* clock status */
 #define ADJ_TIMECONST		0x0020	/* pll time constant */
+#define ADJ_TAI			0x0080	/* set TAI offset */
+#define ADJ_MICRO		0x1000	/* select microsecond resolution */
+#define ADJ_NANO		0x2000	/* select nanosecond resolution */
 #define ADJ_TICK		0x4000	/* tick value */
 #define ADJ_OFFSET_SINGLESHOT	0x8001	/* old-fashioned adjtime */
 
@@ -77,8 +85,9 @@
 #define MOD_ESTERROR	ADJ_ESTERROR
 #define MOD_STATUS	ADJ_STATUS
 #define MOD_TIMECONST	ADJ_TIMECONST
-#define MOD_CLKB	ADJ_TICK
-#define MOD_CLKA	ADJ_OFFSET_SINGLESHOT /* 0x8000 in original */
+#define MOD_TAI		ADJ_TAI
+#define MOD_MICRO	ADJ_MICRO
+#define MOD_NANO	ADJ_NANO
 
 
 /* Status codes (timex.status) */
@@ -98,9 +107,12 @@
 #define STA_PPSERROR	0x0800	/* PPS signal calibration error (ro) */
 
 #define STA_CLOCKERR	0x1000	/* clock hardware fault (ro) */
+#define STA_NANO	0x2000	/* resolution (0 = us, 1 = ns) (ro) */
+#define STA_MODE	0x4000	/* mode (0 = PLL, 1 = FLL) (ro) */
+#define STA_CLK		0x8000	/* clock source (0 = A, 1 = B) (ro) */
 
 #define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \
-    STA_PPSERROR | STA_CLOCKERR) /* read-only bits */
+	STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK)
 
 /* Clock states (time_state) */
 #define TIME_OK		0	/* clock synchronized, no leap second */