# Copyright 1999-2008 Gentoo Foundation
# [v-fox] ftp://dfx.homeftp.net/services/GENTOO/v-fox
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/sys-boot/grub/grub-0.97-r5.ebuild,v 1.8 2008/04/07 08:14:09 robbat2 Exp $

inherit mount-boot eutils flag-o-matic multilib autotools

PATCHVER="1.7"
DESCRIPTION="GNU GRUB Legacy boot loader"
HOMEPAGE="http://www.gnu.org/software/grub/"
SRC_URI="mirror://gentoo/${P}.tar.gz
	ftp://alpha.gnu.org/gnu/${PN}/${P}.tar.gz
	mirror://gentoo/splash.xpm.gz
	mirror://gentoo/${P}-patches-${PATCHVER}.tar.bz2"

LICENSE="GPL-2"
SLOT="0"
KEYWORDS="~amd64 ~x86 ~x86-fbsd"
IUSE="custom-cflags ncurses netboot static gfxboot"

DEPEND="ncurses? (
		>=sys-libs/ncurses-5.2-r5
		amd64? ( app-emulation/emul-linux-x86-baselibs )
		)
	gfxboot? ( media-gfx/gfxboot )"
PROVIDE="virtual/bootloader"

pkg_setup() {
	has_multilib_profile()
	if use amd64 && ! use multilib; then
		eerror "You are not using multilib profile and"
		eerror "GRUB does not work if compiled in 64bit"
		eerror "so, change profile or forget about it"
		epause 5
		die "not suitable profile"
	fi
}

src_unpack() {
	unpack ${A}
	cd "${S}"

	# patch breaks booting for some people #111885
	rm "${WORKDIR}"/patch/400_*

	# Grub will not handle a kernel larger than EXTENDED_MEMSIZE Mb as
	# discovered in bug 160801. We can change this, however, using larger values
	# for this variable means that Grub needs more memory to run and boot. For a
	# kernel of size N, Grub needs (N+1)*2.  Advanced users should set a custom
	# value in make.conf, it is possible to make kernels ~16Mb in size, but it
	# needs the kitchen sink built-in.
	local t="custom"
	if [[ -z ${GRUB_MAX_KERNEL_SIZE} ]] ; then
		case $(tc-arch) in
			amd64) GRUB_MAX_KERNEL_SIZE=7 ;;
			x86)   GRUB_MAX_KERNEL_SIZE=3 ;;
		esac
		t="default"
	fi
	einfo "Grub will support the ${t} maximum kernel size of ${GRUB_MAX_KERNEL_SIZE} Mb (GRUB_MAX_KERNEL_SIZE)"

	sed -i \
		-e "/^#define.*EXTENDED_MEMSIZE/s,3,${GRUB_MAX_KERNEL_SIZE},g" \
		"${S}"/grub/asmstub.c \
		|| die "Failed to hack memory size"

	if [[ -n ${PATCHVER} ]] ; then
		EPATCH_SUFFIX="patch"
		epatch "${WORKDIR}"/patch
		use gfxboot && \
		epatch "${FILESDIR}"/${P}-gfxmenu-v8.patch
		eautoreconf
	fi
}

src_compile() {
	filter-flags -fPIE #168834

	use amd64 && multilib_toolchain_setup x86

	unset BLOCK_SIZE #73499

	### i686-specific code in the boot loader is a bad idea; disabling to ensure
	### at least some compatibility if the hard drive is moved to an older or
	### incompatible system.

	# grub-0.95 added -fno-stack-protector detection, to disable ssp for stage2,
	# but the objcopy's (faulty) test fails if -fstack-protector is default.
	# create a cache telling configure that objcopy is ok, and add -C to econf
	# to make use of the cache.
	#
	# CFLAGS has to be undefined running econf, else -fno-stack-protector detection fails.
	# STAGE2_CFLAGS is not allowed to be used on emake command-line, it overwrites
	# -fno-stack-protector detected by configure, removed from netboot's emake.
	use custom-cflags || unset CFLAGS

	export grub_cv_prog_objcopy_absolute=yes #79734
	use static && append-ldflags -static

	# build the net-bootable grub first, but only if "netboot" is set
	if use netboot ; then
		econf \
		--libdir=/lib \
		--datadir=/usr/lib/grub \
		--exec-prefix=/ \
		--disable-auto-linux-mem-opt \
		--enable-diskless \
		--enable-{3c{5{03,07,09,29,95},90x},cs89x0,davicom,depca,eepro{,100}} \
		--enable-{epic100,exos205,ni5210,lance,ne2100,ni{50,65}10,natsemi} \
		--enable-{ne,ns8390,wd,otulip,rtl8139,sis900,sk-g16,smc9000,tiara} \
		--enable-{tulip,via-rhine,w89c840} || die "netboot econf failed"

		emake w89c840_o_CFLAGS="-O" || die "making netboot stuff"

		mv -f stage2/{nbgrub,pxegrub} "${S}"/
		mv -f stage2/stage2 stage2/stage2.netboot

		make clean || die "make clean failed"
	fi

	# Now build the regular grub
	# Note that FFS and UFS2 support are broken for now - stage1_5 files too big
	econf \
		--libdir=/lib \
		--datadir=/usr/lib/grub \
		--exec-prefix=/ \
		--disable-auto-linux-mem-opt \
		$(use_with ncurses curses) \
		|| die "econf failed"

	# sanity check due to common failure
	use ncurses && ! grep -qs "HAVE_LIBCURSES.*1" config.h && die "USE=ncurses but curses not found"

	emake || die "making regular stuff"
}

src_test() {
	# non-default block size also give false pass/fails.
	unset BLOCK_SIZE
	make check || die "make check failed"
}

src_install() {
	emake DESTDIR="${D}" install || die
	if use netboot ; then
		exeinto /usr/lib/grub/${CHOST}
		doexe nbgrub pxegrub stage2/stage2.netboot || die "netboot install"
	fi

	dodoc AUTHORS BUGS ChangeLog NEWS README THANKS TODO
	newdoc docs/menu.lst grub.conf.sample

	insinto /boot/grub
	doins "${DISTDIR}"/splash.xpm.gz
}

setup_boot_dir() {
	local boot_dir=$1
	local dir=${boot_dir}

	[[ ! -e ${dir} ]] && die "${dir} does not exist!"
	dir="${dir}/grub"
	if [[ ! -e ${dir} ]] ; then
		mkdir "${dir}" || die "${dir} does not exist!"
	fi

	# change menu.lst to grub.conf
	if [[ ! -e ${dir}/grub.conf ]] && [[ -e ${dir}/menu.lst ]] ; then
		mv -f "${dir}"/menu.lst "${dir}"/grub.conf
		ewarn
		ewarn "*** IMPORTANT NOTE: menu.lst has been renamed to grub.conf"
		ewarn
	fi

	if [[ -e ${dir}/stage2 ]] ; then
		mv "${dir}"/stage2{,.old}
		ewarn "*** IMPORTANT NOTE: you must run grub and install"
		ewarn "the new version's stage1 to your MBR.  Until you do,"
		ewarn "stage1 and stage2 will still be the old version, but"
		ewarn "later stages will be the new version, which could"
		ewarn "cause problems such as an unbootable system."
		ebeep
	fi

	einfo "Copying files from /lib/grub and /usr/lib/grub to ${dir}"
	for x in "${ROOT}"/lib*/grub/*/* "${ROOT}"/usr/lib*/grub/*/* ; do
		[[ -f ${x} ]] && cp -p "${x}" "${dir}"/
	done

	if [[ -e ${dir}/grub.conf ]] ; then
		egrep \
			-v '^[[:space:]]*(#|$|default|fallback|initrd|password|splashimage|timeout|title)' \
			"${dir}"/grub.conf | \
		/sbin/grub --batch \
			--device-map="${dir}"/device.map \
			> /dev/null
	fi

	# the grub default commands silently piss themselves if
	# the default file does not exist ahead of time
	if [[ ! -e ${dir}/default ]] ; then
		grub-set-default --root-directory="${boot_dir}" default
	fi
}

pkg_postinst() {
	[[ -n ${DONT_MOUNT_BOOT} ]] && return 0
	setup_boot_dir "${ROOT}"/boot
	einfo "To install grub files to another device (like a usb stick), just run:"
	einfo "   emerge --config =${PF}"
}

pkg_config() {
	local dir
	einfo "Enter the directory where you want to setup grub:"
	read dir
	setup_boot_dir "${dir}"
}