Linux version 2.6.22-gentoo-r7 (root@genx) (gcc version 4.1.2 (Gentoo 4.1.2)) #2 SMP Mon Sep 24 12:46:37 PDT 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d800 (usable) BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007deb0000 (usable) BIOS-e820: 000000007deb0000 - 000000007decd000 (ACPI data) BIOS-e820: 000000007decd000 - 000000007df00000 (ACPI NVS) BIOS-e820: 000000007df00000 - 000000007e000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 1118MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f6900 Entering add_active_range(0, 0, 515760) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 515760 early_node_map[1] active PFN ranges 0: 0 -> 515760 On node 0 totalpages: 515760 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 2237 pages used for memmap HighMem zone: 284147 pages, LIFO batch:31 DMI present. ACPI: RSDP 000F68D0, 0024 (r2 LENOVO) ACPI: XSDT 7DEBCA72, 0094 (r1 LENOVO TP-7L 1090 LTP 0) ACPI: FACP 7DEBCC00, 00F4 (r3 LENOVO TP-7L 1090 LNVO 1) ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] ACPI: DSDT 7DEBD00C, FBEF (r1 LENOVO TP-7L 1090 MSFT 3000000) ACPI: FACS 7DEE4000, 0040 ACPI: SSDT 7DEBCDB4, 0258 (r1 LENOVO TP-7L 1090 MSFT 3000000) ACPI: ECDT 7DECCBFB, 0052 (r1 LENOVO TP-7L 1090 LNVO 1) ACPI: TCPA 7DECCC4D, 0032 (r2 LENOVO TP-7L 1090 LNVO 1) ACPI: APIC 7DECCC7F, 0068 (r1 LENOVO TP-7L 1090 LNVO 1) ACPI: MCFG 7DECCCE7, 003C (r1 LENOVO TP-7L 1090 LNVO 1) ACPI: HPET 7DECCD23, 0038 (r1 LENOVO TP-7L 1090 LNVO 1) ACPI: SLIC 7DECCDF0, 0176 (r1 LENOVO TP-7L 1090 LTP 0) ACPI: BOOT 7DECCF66, 0028 (r1 LENOVO TP-7L 1090 LTP 1) ACPI: ASF! 7DECCF8E, 0072 (r16 LENOVO TP-7L 1090 PTL 1) ACPI: SSDT 7DEE26D9, 025F (r1 LENOVO TP-7L 1090 INTL 20050513) ACPI: SSDT 7DEE2938, 00A6 (r1 LENOVO TP-7L 1090 INTL 20050513) ACPI: SSDT 7DEE29DE, 04F7 (r1 LENOVO TP-7L 1090 INTL 20050513) ACPI: SSDT 7DEE2ED5, 01D8 (r1 LENOVO TP-7L 1090 INTL 20050513) ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 7e000000:72000000) Built 1 zonelists. Total pages: 511731 Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda2 doscsi acpi_sleep=s3_mode mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c05f4000 soft=c05d4000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2194.680 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2037400k/2063040k available (3390k kernel code, 24464k reserved, 1230k data, 276k init, 1145536k highmem) virtual kernel memory layout: fixmap : 0xffe17000 - 0xfffff000 (1952 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc058a000 - 0xc05cf000 ( 276 kB) .data : 0xc044fbb0 - 0xc0583404 (1230 kB) .text : 0xc0100000 - 0xc044fbb0 (3390 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4393.24 BogoMIPS (lpj=21966208) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c05f5000 soft=c05d5000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4389.03 BogoMIPS (lpj=21945151) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a Total of 2 processors activated (8782.27 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: Measured 1273107 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to: check_tsc_sync_source failed. Brought up 2 CPUs migration_cost=10000 NET: Registered protocol family 16 ACPI: ACPI Dock Station Driver ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: Power Resource [PUBS] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved pnp: 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved pnp: 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved Time: hpet clocksource has been installed. Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 PCI: Failed to allocate mem resource #6:20000@f0000000 for 0000:01:00.0 PCI: Bridge: 0000:00:01.0 IO window: 2000-2fff MEM window: d4000000-d6ffffff PREFETCH window: e0000000-efffffff PCI: Bridge: 0000:00:1c.0 IO window: 3000-3fff MEM window: fc000000-fdffffff PREFETCH window: f8000000-f80fffff PCI: Bridge: 0000:00:1c.1 IO window: 4000-4fff MEM window: dc100000-df2fffff PREFETCH window: dfd00000-dfdfffff PCI: Bridge: 0000:00:1c.2 IO window: 5000-5fff MEM window: d8000000-d9ffffff PREFETCH window: dfa00000-dfafffff PCI: Bridge: 0000:00:1c.3 IO window: 6000-6fff MEM window: d0000000-d1ffffff PREFETCH window: df700000-df7fffff PCI: Bridge: 0000:00:1c.4 IO window: 7000-7fff MEM window: cc000000-cdffffff PREFETCH window: df400000-df4fffff PCI: Bus 22, cardbus bridge: 0000:15:00.0 IO window: 00008000-000080ff IO window: 00008400-000084ff PREFETCH window: f4000000-f7ffffff MEM window: 80000000-83ffffff PCI: Bridge: 0000:00:1e.0 IO window: 8000-bfff MEM window: f8100000-fbffffff PREFETCH window: f4000000-f7ffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 20 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:15:00.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 1700k freed Simple Boot Flag at 0x35 set to 0x1 Machine check exception polling timer started. apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1190739632.650:1): initialized highmem bounce pool size: 64 pages squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem OCFS2 1.3.3 OCFS2 Node Manager 1.3.3 OCFS2 DLM 1.3.3 OCFS2 DLMFS 1.3.3 OCFS2 User DLM kernel interface loaded GFS2 (built Sep 24 2007 10:41:23) installed Lock_Nolock (built Sep 24 2007 10:41:28) installed io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Boot video device is 0000:01:00.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie02] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] Allocate Port Service[0000:00:1c.2:pcie03] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] Allocate Port Service[0000:00:1c.3:pcie03] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] Allocate Port Service[0000:00:1c.4:pcie03] ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLPB] set_level status: 0 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) set_level status: 0 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI: SSDT 7DEE1D72, 02C4 (r1 PmRef Cpu0Ist 100 INTL 20050513) ACPI: SSDT 7DEE20BB, 061E (r1 PmRef Cpu0Cst 100 INTL 20050513) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7DEE1CAA, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) ACPI: SSDT 7DEE2036, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU1] (supports 8 throttling states) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: module loaded thinkpad_acpi: ThinkPad ACPI Extras v0.14 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad EC firmware 7KHT21WW-1.05 PPP generic driver version 2.4.2 myri10ge: Version 1.3.1-1.248 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH8M: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 ICH8M: chipset revision 3 ICH8M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1830-0x1837, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... Clocksource tsc unstable (delta = -199725459 ns) hda: HL-DT-ST DVDRAM GSA-U10N, ATAPI CD/DVD-ROM drive hda: selected mode 0x42 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Loading iSCSI transport class v2.0-724. PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input3 Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1b.0 to 64 Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input4 ALSA device list: #0: HDA Intel at 0xfe220000 irq 21 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI No-Shortcut mode Freeing unused kernel memory: 276k freed ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:15:00.1 to 64 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[f8101000-f81017ff] Max Packet=[2048] IR/IT contexts=[4/4] libata version 2.21 loaded. ahci 0000:00:1f.2: version 2.2 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci ata1: SATA max UDMA/133 cmd 0xf8856100 ctl 0x00000000 bmdma 0x00000000 irq 217 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032a10281d] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: HTE721010G9SA00, MCZOC10V, max UDMA/100 ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA HTE721010G9SA00 MCZO PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk JFS: nTxBlock = 8192, nTxLock = 65536 Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:19.0 to 64 e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1a:6b:36:30:49 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection sd 0:0:0:0: Attached scsi generic sg0 type 0 ReiserFS: sda2: found reiserfs format "3.6" with standard journal ReiserFS: sda2: using ordered data mode ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda2: checking transaction log (sda2) ReiserFS: sda2: Using r5 hash to sort names IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /class/input/input5 Real Time Clock Driver v1.12ac ath_hal: module license 'Proprietary' taints kernel. ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) wlan: 0.8.4.2 (0.9.3.2) ath_pci: no version for "ieee80211_encap" found: kernel tainted. ath_pci: 0.9.4.5 (0.9.3.2) ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:03:00.0 to 64 input: PC Speaker as /class/input/input6 ath_rate_sample: 1.2 (0.9.3.2) wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: H/W encryption support: WEP AES AES_CCM TKIP wifi0: mac 10.3 phy 6.1 radio 10.2 wifi0: Use hw queue 1 for WME_AC_BE traffic wifi0: Use hw queue 0 for WME_AC_BK traffic wifi0: Use hw queue 2 for WME_AC_VI traffic wifi0: Use hw queue 3 for WME_AC_VO traffic wifi0: Use hw queue 8 for CAB traffic wifi0: Use hw queue 9 for beacons wifi0: Atheros 5212: mem=0xdf2f0000, irq=21 ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 20 Linux agpgart interface v0.102 (c) Dave Jones ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007 Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6] Yenta: ISA IRQ mask 0x04b8, PCI irq 16 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff cs: IO port probe 0x8000-0xbfff: clean. pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff tp_base: loaded. tp_smapi: tp_smapi 0.20 loading... tp_smapi: successfully loaded (smapi_port=0xb2). thinkpad: I have registered to handle major: 10 minor: 170. fuse init (API version 7.8) fuse distribution version: 2.7.0 cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0x800-0x8ff: excluding 0x800-0x80f cs: IO port probe 0x100-0x4ff: excluding 0x3b0-0x3df 0x4d0-0x4d7 cs: IO port probe 0xa00-0xaff: clean. kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1028152k swap on /dev/sda3. Priority:-1 extents:1 across:1028152k hda: selected mode 0x42 e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO NET: Registered protocol family 10 lo: Disabled Privacy Extensions eth0: no IPv6 routers present Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized