startup with "rw attached to kernel"

linux_rw.txt (text/plain), 2.91 KB, created by Markus Rothe (RETIRED) on 2007-08-04 16:09:33 UTC

kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Freeing unused kernel memory: 176k freed
INIT: version 2.86 booting
GCouldnt open /de * failed to open `/proc/cmdline': No such file or directory
 * Setting system clock using the hardware clock [UTC] ...
 [ ok ]
 * getmntinfo: No such file or directory
 * root filesystem is mounted read-write - skipping
grep: /proc/mounts: No such file or directory
 * getmntinfo: No such file or directory
 * Checking all filesystems ...
 [ ok ]
 * Mounting local filesystems ...
 [ ok ]
 * Activating (possiAdding 508024k swap on /dev/sda2.  Priority:-1 extents:1 across:508024k
ble) swap ...
 [ ok ]
 * Setting hostname to power3 ...
 [ ok ]
 * Configuring kernel parameters ...
error: "net.ipv4.ip_forward" is an unknown key
error: "net.ipv4.conf.default.rp_filter" is an unknown key
error: "net.ipv4.conf.all.rp_filter" is an unknown key
 [ !! ]
 * Updating environment ...
 [ ok ]
 * Cleaning /var/lock, /var/run ...
 [ ok ]
 * Wiping /tmp directory ...
 [ ok ]
 * Loading key mappings ...
 [ ok ]
 * Setting terminal encoding to UTF-8 ...
 [ ok ]
 * Setting user font ...
 [ ok ]
 * Bringing up interface lo
grep: /proc/net/dev: No such file or directory
 *   ERROR: interface lo does not exist
 *   Ensure that you have loaded the correct kernel module for your hardware
INIT: Entering runlevel: 3
 * failed to open `/proc/cmdline': No such file or directory
 * Bringing up interface lo
grep: /proc/net/dev: No such file or directory
 *   ERROR: interface lo does not exist
 *   Ensure that you have loaded the correct kernel module for your hardware
 * ERROR: net.lo failed to start
 * Beth0: link up, 100Mbps, full-duplex
ringing up interface eth0
grep: /proc/net/dev: No such file or directory
 *   ERROR: interface eth0 does not exist
 *   Ensure that you have loaded the correct kernel module for your hardware
 * ERROR: net.eth0 failed to start
 * ERROR: cannot start netmount as net.eth0 would not start
 * Starting syslog-ng ...
 * nothing in /proc
 * Failed to start syslog-ng
 [ !! ]
 * ERROR: syslog-ng failed to start
 * ERROR: cannot start sshd as net.eth0 would not start
 * Starting local ...
 [ ok ]
 * failed to open `/proc/cmdline': No such file or directory


This is power3 (Linux ppc64 2.6.21.6) 16:58:29

power3 login: root
Password: 
login(pam_unix)[608]: session opened for user root by (uid=0)
Last login: Sat Aug  4 16:49:52 2007 on ttyS0
login[621]: ROOT LOGIN  on 'ttyS0'
power3 ~ # mount -t proc none /proc/
power3 ~ # rc
 * Bringing up interface lo
 *   127.0.0.1/8 ...
 [ ok ]
 *   Adding routes
 *     127.0.0.0/8 via 127.0.0.1 ...
 [ ok ]
 * Bringing up interface eth0
 *   192.168.0.4/24 ...
 [ ok ]
 *   Adding routes
 *     default via 192.168.0.1 ...
 [ ok ]
 * Mounting network filesystems ...
 [ ok ]
 * Starting syslog-ng ...
 [ ok ]
 * Starting sshd ...
 [ ok ]
power3 ~ #