baught recently some Maxtor drives. Since Maxtor have been bought by Seagate, it's Seagate's technology, with a MAxtor label on it. ************************************************************HDDTEMP root@moon_gen_2:/tmp# hddtemp --debug /dev/hda ================= hddtemp 0.3-beta15 ================== Model: MAXTOR STM3160212A field(1) = 180 (0xb4) field(3) = 0 (0x00) field(4) = 29 (0x1d) field(5) = 0 (0x00) field(7) = 131 (0x83) field(9) = 116 (0x74) field(10) = 0 (0x00) field(12) = 34 (0x22) field(187) = 0 (0x00) field(189) = 0 (0x00) field(190) = 44 (0x2c) field(194) = 44 (0x2c) field(195) = 254 (0xfe) field(197) = 0 (0x00) field(198) = 0 (0x00) field(199) = 0 (0x00) field(200) = 0 (0x00) field(202) = 0 (0x00) If one of the field value seems to match the temperature, be sure to read the hddtemp man page before sending a report (section REPORT). Thanks. root@moon_gen_2:/tmp# hddtemp /dev/hda ********************************************************* HDPARM root@moon_gen_2:/tmp# hdparm -i /dev/hda /dev/hda: Model=MAXTOR STM3160212A, FwRev=3.AAJ, SerialNo=9LS2Z94Y Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=16 CurCHS=4317/15/255, CurSects=16512525, LBA=yes, LBAsects=268435455 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma3 udma4 *udma5 AdvancedPM=no WriteCache=enabled Drive conforms to: Unspecified: ATA/ATAPI-1 ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6 ATA/ATAPI-7 * signifies the current active mode root@moon_gen_2:/tmp# ********************************************************** SMART smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: MAXTOR STM3160212A Serial Number: 9LS2Z94Y Firmware Version: 3.AAJ User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Feb 12 20:50:51 2007 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 113 095 006 Pre-fail Always - 52583348 3 Spin_Up_Time 0x0003 095 094 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 29 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 068 060 030 Pre-fail Always - 6315340 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 116 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 34 187 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 189 Unknown_Attribute 0x003a 100 100 000 Old_age Always - 0 190 Temperature_Celsius 0x0022 056 055 045 Old_age Always - 757792812 194 Temperature_Celsius 0x0022 044 045 000 Old_age Always - 44 (Lifetime Min/Max 0/22) 195 Hardware_ECC_Recovered 0x001a 055 050 000 Old_age Always - 192126650 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.