Linux version 2.6.23-rc1 (root@elvis) (gcc version 4.1.2 (Gentoo 4.1.2)) #1 Sat Jul 28 01:55:03 CEST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000077d0000 (usable) BIOS-e820: 00000000077d0000 - 00000000077df000 (ACPI data) BIOS-e820: 00000000077df000 - 0000000007800000 (ACPI NVS) 119MB LOWMEM available. Entering add_active_range(0, 0, 30672) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 30672 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 30672 On node 0 totalpages: 30672 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 207 pages used for memmap Normal zone: 26369 pages, LIFO batch:7 Movable zone: 0 pages used for memmap DMI 2.3 present. ACPI: RSDP 000F5800, 0024 (r2 ACPIAM) ACPI: XSDT 077D0100, 0034 (r1 A M I OEMXSDT 12000526 MSFT 97) ACPI: FACP 077D0290, 00F4 (r3 A M I OEMFACP 12000526 MSFT 97) ACPI: DSDT 077D0390, 2B04 (r1 0AHMM 0AHMM109 109 INTL 2002026) ACPI: FACS 077DF000, 0040 ACPI: OEMB 077DF040, 0040 (r1 A M I AMI_OEM 12000526 MSFT 97) Allocating PCI resources starting at 10000000 (gap: 07800000:f8800000) swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 Built 1 zonelists in Zone order. Total pages: 30433 Kernel command line: 5 root=/dev/hda1 video=intelfb:accel,hwcursor,mode=1360x768-32@60 CONSOLE=/dev/tt$ Found and enabled local APIC! mapped APIC to ffffb000 (fee00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 512 (order: 9, 2048 bytes) Detected 730.928 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 118312k/122688k available (1450k kernel code, 3848k reserved, 423k data, 152k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffb5000 - 0xfffff000 ( 296 kB) vmalloc : 0xc8000000 - 0xfffb3000 ( 895 MB) lowmem : 0xc0000000 - 0xc77d0000 ( 119 MB) .init : 0xc02d8000 - 0xc02fe000 ( 152 kB) .data : 0xc026aa7a - 0xc02d492c ( 423 kB) .text : 0xc0100000 - 0xc026aa7a (1450 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1463.50 BogoMIPS (lpj=2437601) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. CPU: Intel Mobile Intel(R) Celeron(TM) CPU 733MHz stepping 04 Checking 'hlt' instruction... OK. ACPI: Core revision 20070126 ACPI: setting ELCR to 0200 (from 8e20) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0500-053f claimed by ICH4 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI Warning (tbutils-0158): Incorrect checksum in table [OEMB] - 92, should be 8F [20070126] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report ACPI: RTC can wake from S4 Time: tsc clocksource has been installed. pnp: 00:09: iomem range 0xffc00000-0xfff7ffff has been reserved pnp: 00:0a: iomem range 0x0-0x0 could not be reserved pnp: 00:0a: iomem range 0x0-0x0 could not be reserved pnp: 00:0c: ioport range 0xa00-0xa3f has been reserved pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved pnp: 00:0d: iomem range 0xc0000-0xdffff could not be reserved pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:0d: iomem range 0x100000-0x77fffff could not be reserved PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: ff700000-ff7fffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered Unpacking initramfs... done Freeing initrd memory: 589k freed audit: initializing netlink socket (disabled) audit(1185604988.286:1): initialized io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 intel_rng: FWH not detected Linux agpgart interface v0.102 agpgart: Detected an Intel 830M Chipset. agpgart: No pre-allocated video memory detected. agpgart: AGP aperture is 128M @ 0xf0000000 intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets intelfb: Version 0.9.4 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5 intelfb: 00:02.0: Intel(R) 830M, aperture size 128MB, stolen memory 8060kB intelfb: Looking for mode in private database intelfb: Not enough video ram for mode (10125 KByte vs 8060 KByte). intelfb: Not enough video ram for mode (10125 KByte vs 8060 KByte). intelfb: Not enough video ram for mode (9000 KByte vs 8060 KByte). intelfb: No mode in private database, intelfb: looking for mode in global database <4>intelfb: Not enough video ram for mode (10125 KByte vs 8060 KByte). intelfb: Not enough video ram for mode (10125 KByte vs 8060 KByte). intelfb: Not enough video ram for mode (9000 KByte vs 8060 KByte). intelfb: Initial video mode is 1366x768-32@60. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 ICH4: chipset revision 2 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: SAMSUNG HM160JC, ATA DISK drive hda: host side 80-wire cable detection failed, limiting max speed to UDMA33 hda: selected mode 0x42 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: max request size: 512KiB hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(33) hda: cache flushes supported hda: hda1 hda2 hda3 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Testing NMI watchdog ... OK. Using IPI Shortcut mode input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 152k freed ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.5 to 64 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month intel8x0_measure_ac97_clock: measured 51982 usecs intel8x0: clocking to 48000 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 eth0: RealTek RTL8139 at 0xc805ec00, 00:02:ff:01:e5:b8, IRQ 11 eth0: Identified 8139 chip type 'RTL-8100B/8139D' 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) EXT3 FS on hda1, internal journal Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com input: Power Button (FF) as /devices/virtual/input/input1 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/virtual/input/input2 ACPI: Power Button (CM) [PWRB] Adding 248996k swap on /dev/hda2. Priority:-1 extents:1 across:248996k rtc: I/O resource 70 is not free. eth1: link up, 100Mbps, full-duplex, lpa 0x41E1 hda: selected mode 0x42