Kernel messages from 2.6.23-rc1 kernel

dmesg-2.6.23-rc1.log (text/plain), 10.10 KB, created by Alexander Weber on 2007-07-28 06:54:50 UTC

Linux version 2.6.23-rc1 (root@elvis) (gcc version 4.1.2 (Gentoo 4.1.2)) #1 Sat Jul 28 01:55:03 CEST 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000077d0000 (usable)
 BIOS-e820: 00000000077d0000 - 00000000077df000 (ACPI data)
 BIOS-e820: 00000000077df000 - 0000000007800000 (ACPI NVS)
119MB LOWMEM available.
Entering add_active_range(0, 0, 30672) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->    30672
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->    30672
On node 0 totalpages: 30672
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 207 pages used for memmap
  Normal zone: 26369 pages, LIFO batch:7
  Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F5800, 0024 (r2 ACPIAM)
ACPI: XSDT 077D0100, 0034 (r1 A M I  OEMXSDT  12000526 MSFT       97)
ACPI: FACP 077D0290, 00F4 (r3 A M I  OEMFACP  12000526 MSFT       97)
ACPI: DSDT 077D0390, 2B04 (r1  0AHMM 0AHMM109      109 INTL  2002026)
ACPI: FACS 077DF000, 0040
ACPI: OEMB 077DF040, 0040 (r1 A M I  AMI_OEM  12000526 MSFT       97)
Allocating PCI resources starting at 10000000 (gap: 07800000:f8800000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
Built 1 zonelists in Zone order.  Total pages: 30433
Kernel command line: 5 root=/dev/hda1  video=intelfb:accel,hwcursor,mode=1360x768-32@60 CONSOLE=/dev/tt$
Found and enabled local APIC!
mapped APIC to ffffb000 (fee00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 512 (order: 9, 2048 bytes)
Detected 730.928 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 118312k/122688k available (1450k kernel code, 3848k reserved, 423k data, 152k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffb5000 - 0xfffff000   ( 296 kB)
    vmalloc : 0xc8000000 - 0xfffb3000   ( 895 MB)
    lowmem  : 0xc0000000 - 0xc77d0000   ( 119 MB)
      .init : 0xc02d8000 - 0xc02fe000   ( 152 kB)
      .data : 0xc026aa7a - 0xc02d492c   ( 423 kB)
      .text : 0xc0100000 - 0xc026aa7a   (1450 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1463.50 BogoMIPS (lpj=2437601)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: Intel Mobile Intel(R) Celeron(TM) CPU          733MHz stepping 04
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 8e20)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI Warning (tbutils-0158): Incorrect checksum in table [OEMB] -  92, should be 8F [20070126]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
ACPI: RTC can wake from S4
Time: tsc clocksource has been installed.
pnp: 00:09: iomem range 0xffc00000-0xfff7ffff has been reserved
pnp: 00:0a: iomem range 0x0-0x0 could not be reserved
pnp: 00:0a: iomem range 0x0-0x0 could not be reserved
pnp: 00:0c: ioport range 0xa00-0xa3f has been reserved
pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0d: iomem range 0xc0000-0xdffff could not be reserved
pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0d: iomem range 0x100000-0x77fffff could not be reserved
PCI: Bridge: 0000:00:1e.0
  IO window: d000-dfff
  MEM window: ff700000-ff7fffff
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 589k freed
audit: initializing netlink socket (disabled)
audit(1185604988.286:1): initialized
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
intel_rng: FWH not detected
Linux agpgart interface v0.102
agpgart: Detected an Intel 830M Chipset.
agpgart: No pre-allocated video memory detected.
agpgart: AGP aperture is 128M @ 0xf0000000
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
intelfb: Version 0.9.4
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
intelfb: 00:02.0: Intel(R) 830M, aperture size 128MB, stolen memory 8060kB
intelfb: Looking for mode in private database
intelfb: Not enough video ram for mode (10125 KByte vs 8060 KByte).
intelfb: Not enough video ram for mode (10125 KByte vs 8060 KByte).
intelfb: Not enough video ram for mode (9000 KByte vs 8060 KByte).
intelfb: No mode in private database, intelfb: looking for mode in global database <4>intelfb: Not enough video ram for mode (10125 KByte vs 8060 KByte).
intelfb: Not enough video ram for mode (10125 KByte vs 8060 KByte).
intelfb: Not enough video ram for mode (9000 KByte vs 8060 KByte).
intelfb: Initial video mode is 1366x768-32@60.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: SAMSUNG HM160JC, ATA DISK drive
hda: host side 80-wire cable detection failed, limiting max speed to UDMA33
hda: selected mode 0x42
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 512KiB
hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(33)
hda: cache flushes supported
 hda: hda1 hda2 hda3
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Testing NMI watchdog ... OK.
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 152k freed
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
intel8x0_measure_ac97_clock: measured 51982 usecs
intel8x0: clocking to 48000
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL8139 at 0xc805ec00, 00:02:ff:01:e5:b8, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
EXT3 FS on hda1, internal journal
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [e-mail]
input: Power Button (FF) as /devices/virtual/input/input1
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/virtual/input/input2
ACPI: Power Button (CM) [PWRB]
Adding 248996k swap on /dev/hda2.  Priority:-1 extents:1 across:248996k
rtc: I/O resource 70 is not free.
eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
hda: selected mode 0x42