> mount hda1
ide: {QUANTUM FIREBALL CR8.4A}
ide: LBA 16514064
ide: supports PIO mode 4
ide: mode 4 timing
ext2: revision 1
> load kernel.gz
0012c4ea 1230058t
> execute
inflate: decompressing
elf32: 00080000 - 002c801f (8029a000) (ffffffff.80000000)
elf32: 80080000 (80080000) 2306182t + 85914t
Linux version 2.6.20.11-mipsgit-20070415 (root@cobalt) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #3 Wed Jun 13 20:43:137
CPU revision is: 000028a0
FPU revision is: 000028a0
Cobalt board ID: 6
Determined physical RAM map:
 memory: 04000000 @ 00000000 (usable)
Built 1 zonelists.  Total pages: 16256
Kernel command line: root=/dev/hda3 console=ttyS0,115200
Primary instruction cache 32kB, physically tagged, 2-way, linesize 32 bytes.
Primary data cache 32kB, 2-way, linesize 32 bytes.
Synthesized TLB refill handler (21 instructions).
Synthesized TLB load handler fastpath (34 instructions).
Synthesized TLB store handler fastpath (34 instructions).
Synthesized TLB modify handler fastpath (33 instructions).
PID hash table entries: 256 (order: 8, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 62060k/65536k available (1839k kernel code, 3420k reserved, 308k data, 104k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Galileo: fixed bridge class
Galileo: revision 17
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 2048 bind 1024)
TCP reno registered
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Activating ISA DMA hang workarounds.
rtc: SRM (post-2000) epoch (2000) detected
Real Time Clock Driver v1.12ac
Cobalt LCD Driver v2.10
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ÿserial8250: ttyS0 at I/O 0xc800000 (irq = 21) is a ST16650V2
loop: loaded (max 8 devices)
Linux Tulip driver version 1.1.14 (December 15, 2004)
PCI: Enabling device 0000:00:07.0 (0001 -> 0003)
tulip0: Old format EEPROM on 'Cobalt Microserver' board.  Using substitute media control info.
tulip0:  EEPROM default media type Autosense.
tulip0:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip0:  MII transceiver #1 config 1000 status 7809 advertising 01e1.
eth0: Digital DS21142/43 Tulip rev 65 at Port 0x1000, 00:10:E0:00:5D:52, IRQ 19.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:09.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c586a (rev 27) IDE UDMA33 controller on pci0000:00:09.1
    ide0: BM-DMA at 0x10a0-0x10a7, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:pio, hdd:pio
ide0: I/O resource 0xF00003F6-0xF00003F6 not free.
ide0: ports already in use, skipping probe
ide1: I/O resource 0xF0000376-0xF0000376 not free.
ide1: ports already in use, skipping probe
ide0: I/O resource 0xF00003F6-0xF00003F6 not free.
ide0: ports already in use, skipping probe
ide1: I/O resource 0xF0000376-0xF0000376 not free.
ide1: ports already in use, skipping probe
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
SCTP: Hash tables configured (established 2048 bind 4096)
VFS: Cannot open root device "hda3" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)