Attachment 11544 Details for Bug 17897 – xml file to be parsed by guide.xsl

xml file to be parsed by guide.xsl

howto.xml (text/xml), 53.54 KB, created by michael on 2003-05-05 17:24:47 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: michael

Created: 2003-05-05 17:24:47 UTC

Size: 53.54 KB

patch

obsolete

><?xml version='1.0'?>
>  
><guide>
><title>openMosix and Diskless Nodes</title>
><author title="Researcher"><mail link="ma53@drexel.edu">Michael Andrews</mail></author>
>
><abstract>
>This HOWTO  will help you create an openMosix cluster using diskless nodes, and of course Gentoo! 
></abstract>
>
><version>1.0</version>
><date>29 Mar 2003</date>
>
><chapter>
><title>Introduction</title>
>
><section>
><title>About this HOWTO</title>
><body>
><p>
>This HOWTO  will help you create an openMosix cluster using <e>diskless</e> nodes.  It will be based around the Gentoo Linux distribution.  I intended to make this as user friendly as possible and cater to the Linux newbie, because I myself came into this project as a complete newbie.  While an experienced user could easily tie the multiple HOWTOs available on openMosix, diskless nodes and networking together; I had various difficulties that I hope I can alleviate through this HOWTO.  
></p>
></body>
></section>
>
>
><section>
><title>About openMosix</title>
><body>
><p>
>OpenMosix is a patch to the Linux kernel that allows multiple hosts to act as a single system image (SSI).  This results in multiple hosts <e>appearing</e> as one large multiprocessor host.  At the time of this writing I am using the latest release of the openMosix kernel patch, version 2.4.20, and openMosix user tools version 0.2.4-r4.  There is a wide variety of information about openMosix at <uri>http://openmosix.sourceforge.net</uri>. I have had difficulties tying to cluster different versions of patched kernel sources, and have found that the patches are not backwards compatible.  OpenMosix migrates heavy weight processes explicitly when executing a.out or ELF binaries or when a heavy weight process forks.  It will not migrate light weight processes such as p-threads, or heavyweight processes that use shared memory. 
></p>
><p>
>For more information about openMosix visit their home page.
></p>
></body>
></section>
>
>
><section>
><title>About the cluster</title>
><body>
><p>
>Our cluster will be comprised of individual computers (nodes) sharing computational resources in an effort to increase the computational power of all nodes.  Not all nodes need to be of the same architecture but that makes the task of clustering them much easier.  One node will function as the "master", the node that hosts the other diskless machines or "slaves".  The slave nodes will be purely computational, meaning that they will function only as additional hardware utilized by the master.  Additionally, you can easily configure pseudo-nodes, nodes that utilize the computational power of the cluster but do not necessarily participate in the cluster, like a personal work station.
></p>
></body>
></section>
>
><section>
><title>Before you start</title>
><body>
><p>
>You should have Gentoo installed on your master node and enough space on the master to store the file systems of the slave nodes you want to host.  Additionally you should have the openMosix kernel source which has been conveniently patched by Gentoo.  
></p>
><p>
>To get this source simply type:
></p>
><pre caption="acquiring patched kernel source">
># <c>emerge openmosix-sources</c>
></pre>
></body>
></section>
>
></chapter>
>
><chapter>
><title>Configuring the master and slave nodes</title>
>
><section>
><title>About kernels</title>
><body>
><p>
>The kernel is the software that sits between your hardware and all other software you have loaded on your machine, essentially the heart of a kernel based operating system.  When your computer is started, the BIOS executes the instructions found at the reserved boot space of your hard drive.  These instructions are typically a boot loader that loads your kernel.  After your kernel has been loaded all processes are handled by the kernel.  
></p>
><p>
>For more information on kernels and kernel configuration you might want to check out this helpful HOWTO, <uri>http://www.tldp.org/HOWTO/Kernel-HOWTO.html</uri>.
></p>
></body>
></section>
>
><section>
><title>Configuring the master kernel</title>
><body>
><p>
>The master kernel can be as large and as customized as you would like but there are a few required kernel options you need to check off.  Go into your kernel configuration by typing:
></p>
><pre caption="editing the master's kernel configuration">
># <c>cd /usr/src/linux-2.4.20-openmosix-r1</c>
># <c>make menuconfig</c>
></pre>
><p>
>You should get a grey and blue GUI that offers a safe alternative to manually editing the <path>/usr/src/linux/.config</path> file.  If your kernel is currently functioning well you might want to save the current configuration file by typing:
></p>
><pre caption="backing up the master's kernel configuration">
># <c>cp .config .config_working</c>
></pre>
><p>
>The topmost menu item should say <c>openMosix ---</c>.  If it doesn't you need to emerge the kernel source with the openMosix patch (<uri link="#doc_chap1_pre1">code listing 1.1</uri>). Go into the following sub-menus and make sure the following items are checked as built-in <e>NOT</e> as modular.
></p>
><ul>
><li>openMosix --- </li>
><ul>
>	<li>openMosix process migration support</li>
>	<li>openMosix File-System</li>
></ul>
><li>Networking options ---</li>
><ul>
>	<li>Packet Socket</li>
>	<li>Socket Filtering</li>
>	<li>TCP/IP networking</li>
>	<ul><li>IP: multicasting</li></ul>
></ul>
><li>File systems ---</li>
><ul>
>	<li>/proc file system support</li>
>	<li>/dev file system support</li>
>	<ul><li>Automatically mount at boot</li></ul>
>	<li>Network File Systems ---</li>
>	<ul>
>		<li>NFS file system support</li>
>		<li>NFS server support</li>
>		<li>Provide NFSv3 server support</li>
>	</ul>
></ul>
></ul>
><p>
><note>
>the /dev file system support is highly recommend by Gentoo and myself but is not essential to the master's kernel
></note>
><note>
>these kernel configuration options should only be appended to your system specific configuration options and are not meant to completely replace those options
></note>
>After you have re-configured the master's kernel you will want to rebuild it by typing:
></p>
><pre caption="recompiling the master's kernel and modules">
># <c>make clean dep modules</c>
># <c>make install modules_install</c>
></pre>
><p>
>Now that the new bzImage has been copied into your boot directory all you will have to do is reboot the system in order to load these new options.
></p>
></body>
></section>
>
><section>
><title>About the slave kernel</title>
><body>
><p>
>It is recommended that you compile the slave kernel without any modules, since loading and setting them up via remote boot is a difficult and unnecessary process.  Additionally, the slave kernel should be as small and compact as possible in order to efficiently network boot. We are going to compile the slave's kernel in the same place that the master was configured.
></p>
><p>
>To avoid confusion and wasting time its probably a good idea to copy the master's configuration file by typing:
></p>
><pre caption="backing up the master's kernel configuration">
># <c>cp /usr/src/linux/.config /usr/src/linux/.config_master</c>
></pre>
><p>
>Now we will want to configure the slave's kernel in the same fashion that we configured the master's kernel.  If you want to start with a fresh configuration file you can always recover the default <path>/usr/src/linux/.config</path> file by typing:
></p>
><pre caption="acquiring a clean kernel configuration">
># <c>cd /usr/src/linux</c>
># <c>make mrproper</c>
></pre>
><p>
>Otherwise go into the configuration GUI by typing:
></p>
><pre caption="editing the slave's kernel configuration">
># <c>cd /usr/src/linux</c>
># <c>make menuconfig</c>
></pre>
><p>
>You will want to make sure you check off the following options as built-in and <e>NOT</e> modular:
></p>
><ul>
><li>openMosix ---</li>
><ul>
>	<li>openMosix process migration support</li>
>	<li>openMosix File-System</li>
></ul>
><li>Networking options ---</li>
><ul>
>	<li>TCP/IP networking</li>
>	<ul><li>IP: kernel level auto-configuration</li>
>		<ul>
>			<li>IP: DHCP support</li>
>			<li>IP: BOOTP support</li>
>		</ul>
>	</ul>
></ul>
><li>File systems ---</li>
><ul>
>	<li>/proc file system support</li>
>	<li>/dev file system support</li>
>	<ul><li>Automatically mount at boot</li></ul>
>	<li>Network File Systems ---</li>
>	<ul>
>		<li>NFS file system support</li>
>		<ul>
>			<li>Provide NFSv3 client support</li>
>			<li>Root file system on NFS</li>
>		</ul>
>	</ul>
></ul>
></ul>
><p>
>Now the slave's kernel needs to be compiled.  You have to be careful here because you don't want to mess up the modules you have built for the master.  To do this type:
></p>
><pre caption="compiling the slave kernel">
># <c>cd /usr/src/linux</c>
># <c>make clean dep bzImage</c>
></pre>
><p>
>Now copy this bzImage into the <path>/tftpboot</path> directory by typing:
></p>
><pre caption="copying the slave kernel">
># <c>cp /usr/src/linux/arch/i386/boot/bzImage /tftpboot</c>
></pre>
></body>
></section>
>
><section>
><title>Configuring a preliminary slave file system</title>
><body>
><p>
>The master and slave filesystems can be tweaked and changed a lot.  Right now we are only interested in getting a preliminary filesystem of appropriate configuration files and mount points. First we need to create a directory within <path>/tftpboot</path> for the first slave.  Each slave needs it's own root file system because sharing certain system files will cause permissions problems and hard crashes.  You can call these directories anything you want but I suggest using the slaves IP addresses as they are unique and not confusing.  The static IP of my first imaginary slave is <c>192.168.1.21</c> so I would type:
></p>
><pre caption="creating a remote root directory">
># <c>mkdir /tftpboot/192.168.1.21</c>
></pre>
><p>
>Various configuration files contained in <path>/etc</path> also need to be changed on the slave.  Copy the master's <path>/etc</path> directory onto your new slave root by typing:
></p>
><pre caption="creating /etc for the slave's filesystem">
># <c>cp -r /etc /tftpboot/192.168.1.21/etc</c>
></pre>
><p>
>Still this filesystem isn't ready because it needs various mount points.  To create the mount points type:
></p>
><pre caption="creating mount point in the slave's filesystem">
># <c>mkdir /tftboot/192.168.1.21/dev</c>
># <c>mkdir /tftboot/192.168.1.21/proc</c>
># <c>mkdir /tftboot/192.168.1.21/tmp</c>
># <c>mkdir /tftboot/192.168.1.21/mnt</c>
># <c>mkdir /tftboot/192.168.1.21/mnt/.initd</c>
># <c>mkdir /tftboot/192.168.1.21/mfs</c>
># <c>mkdir /tftboot/192.168.1.21/var/empty</c>
># <c>mkdir /tftboot/192.168.1.21/var/lock</c>
># <c>mkdir /tftboot/192.168.1.21/var/run</c>
></pre>
><p>
>Most of these "stubs" should be recognizable to you; <path>/mfs</path> is an openMosix specific stub that will be utilized later.  Stubs like <path>/dev</path>,<path>/proc</path> will be populated when the slave starts, the others will be mounted later. You should also change the <path>/tftpboot/192.168.1.21/etc/hostname</path> file to reflect the hostname of the slave. Binaries, libraries and other files will be populated later in this HOWTO right before you attempt to boot the slave.
></p>
></body>
></section>
>
><section>
><title>Missing Options</title>
><body>
><p>
>If you have missing options in your kernel configuration make sure you check:
></p>
><ul>
><li>Code maturity level options ---</li>
><ul><li>Prompt for development and/or incomplete code/drivers</li></ul>
></ul>
></body>
></section>
>
></chapter>
>
>
><chapter>
><title>Configuring the DHCP server</title>
>
><section>
><title>About the DHCP server</title>
><body>
><p>
>DHCP stands for Dynamic Host Configuration Protocol.  The DHCP server is the first computer the slaves will communicate with when they PXE boot.  The primary purpose of the DHCP server is to assign IP addresses.  The DHCP server can assign IP addresses based on hosts ethernet MAC addresses.  Once the slave has an IP address, the DHCP server will tell the slave where to get its initial file system and kernel.
></p>
></body>
></section>
>
>
><section>
><title>Before you get started</title>
><body>
><p>
>There are several things you will want to make sure are working before you begin.  First check your network connectivity by typing:
></p>
><pre caption="checking networking configurations">
># <c>ifconfig eth0 enable multicast</c>
># <c>ifconfig -a</c>
></pre>
><p>
>You will want to make sure you have have an <e>eth0</e> device running.  It should look something like this:
></p>
><pre caption=" a properly working eth0 device">
>eth0	Link encap:10Mbps Ethernet  HWaddr 00:00:00:00:00:00
>	inet addr:192.168.1.0  Bcast:192.168.255.255  Mask:255.255.255.0
>	UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>	RX packets:2875542 errors:0 dropped:0 overruns:0
>	TX packets:218647 errors:0 dropped:0 overruns:0
>	Interrupt:11 Base address:0x210
></pre>
><p>
>It's important that is says <e>MULTICAST</e>, if doesn't then you will have to recompile your kernel to include multicast support.
></p>
></body>
></section>
>
><section>
><title>Installing the DHCP server</title>
><body>
><p>
>If your network does not already have a DHCP server installed  you will need to install one by typing:
></p>
><pre caption="installing the dhcp server">
># <c>emerge dhcp</c>
></pre>
><p>
>If your network already has a DHCP server installed you will have to edit the configuration file to get the PXE boot to function correctly.
></p>
></body>
></section>
>
><section>
><title>Configuring the DHCP server</title>
><body>
><p>
>There is only one configuration file you will have to edit before starting the  DHCP server.  This file should be stored in <path>/etc/dhcp</path> and called <path>dhcpd.conf</path>.  Copy and edit the provided sample file by typing:
></p>
><pre caption="editing the dhcp server's configuration file">
># <c>cp /etc/dhcp/dhcpd.conf.sample /etc/dhcp/dhcpd.conf</c>
># <c>vim /etc/dhcp/dhcpd.conf</c>
></pre>
><p>
>The general layout of the file is set up in a tiered fashion and looks something like this:
></p>
><pre caption="sample dhcpd.conf layout">
><comment># global options here</comment>
>
>ddns-update-style none;
>shared-network LOCAL-NET {
>
><comment># shared network options here</comment>
>
>subnet 192.168.1.0 netmask 255.255.255.0 {
>
>	<comment># subnet network options here</comment>
>
>	host slave{
>		<comment># host specific options here</comment>
>	}
>
>	group {
>		<comment># group specific options here</comment>
>	}
>}
>}
></pre>
><p>
>The <c>shared-network</c> tier is optional and should be used for IPs you want to assign that belong to the same network topology.  At least one <c>subnet</c> must be declared and the optional <c>group</c> tier allows you to group options between the tiers.  Global options typically look something like this:
></p>
><pre caption="sample dhcpd.conf global options">
>option subnet-mask 255.255.255.0;
>option broadcast-address 192.168.1.255;
>option routers 192.168.1.254;
>option domain-name-servers 192.168.1.1, 192.168.1.2;
>option domain-name "mydomain.org";
></pre>
><p>
>These global options are pretty straight forward.  Here is an example of subnet and host specific options:
></p>
><pre caption="sample dhpcd.conf subnet and host options">
>subnet 192.168.1.0 netmask 255.255.255.0 {
>allow bootp;
>allow booting;
>
>group {
>	next-server 192.168.1.20;
>	filename "pxelinux.0";
>
>	host slave01{
>		hardware ethernet 00:00:00:00:00:00;
>		fixed-address 192.168.1.21;
>		option host-name "slave01";
>	}
>}
>}
></pre>
><p>
>The <c>allow bootp</c> and <c>allow booting</c> options are critical if you are going to use this particular subnet for diskless booting.  The <c>default-lease-time</c>, <c>max-lease-time</c>, and <c>range</c> options allow you to dynamically assign IP addresses within given ranges and for specific amounts of time.  The <c>group</c> declaration allows a specific <c>filename</c> and <c>nextserver</c> to be grouped with particular hosts.  <c>Next-server</c> indicates that after the node has an IP it should  query the <c>next-server</c> IP address and ask for the particular <c>filename</c>.  This IP address should be the master's IP address.  This <c>filename</c> is relative to the <path>/tftpboot</path> directory (part of tftp server specific options which will be covered later).  Inside the <c>host</c> tier, the <c>hardware ethernet</c> option specifies a MAC address, and then <c>fixed-address</c> assigns that particular MAC address to a fixed IP address.  Option <c>host-name</c> is probably a good idea to include and is just the hostname of a particular slave.  There are some pretty good man pages on <path>dhcpd.conf</path> with options that are beyond the scope of this HOWTO.
>You can view them by typing:
></p>
><pre caption="viewing the man pages for dhcpd.conf">
># <c>man dhcpd.conf</c>
></pre>
></body>
></section>
>
><section>
><title>Starting the DHCP server</title>
><body>
><p>
>Before you start the dhcp initialization script edit the <path>/etc/conf.d/dhcp</path> file so that it looks something like this:
></p>
><pre caption="sample /etc/conf.d/dhcp">
>IFACE="eth0"
><comment># insert any other options needed</comment>
>DHCPD_OPTS="-d"
></pre>
><p>
>The -d flag is for verbose debugging.  The <c>IFACE</c> variable is the device you wish to run your DHCP server off of, in our case <c>eth0</c>.  Adding more arguments to  the <c>IFACE</c> variable can be useful for a complex network topology with multiple Ethernet cards.  To start the dhcp server type:  
></p>
><pre caption="starting the dhcp server on the master">
># <c>/etc/init.d/dhcp start</c>
></pre>
><p>
>To add the dhcp server to your start-up scripts type:
></p>
><pre caption="adding the dhcp server to the master's default run level">
># <c>rc-update add dhcp default</c>
></pre>
></body>
></section>
>
><section>
><title>Troubleshooting the DHCP server</title>
><body>
><p>
>If a node boots you will be able to tell by looking at <path>/var/log/daemon.log</path>.  If it successfully boots it  should look something like this:
></p>
><pre caption="sample dhcp log file">
>DHCPDISCOVER from 00:00:00:00:00:00 via eth0
>DHCPOFFER on 192.168.1.21 to 00:00:00:00:00:00 via eth0
>DHCPREQUEST for 192.168.1.21 from 00:00:00:00:00:00 via eth0
>DHCPACK on 192.168.1.21 to 00:00:00:00:00:00 via eth0
></pre>
><p>
>If you get the following message it probably means there is something wrong in the configuration file but that the DHCP server is broadcasting correctly.
></p>
><pre caption="sample dhpc server error">
>no free leases on subnet LOCAL-NET
></pre>
><p>
>Every time you change the configuration file you must restart the DHCP server.  To restart the server type:
></p>
><pre caption="restarting the dhcp server on the master">
># <c>/etc/init.d/dhcpd restart</c>
></pre>
></body>
></section>
>
></chapter>
>
><chapter>
><title>Configuring the TFTP server and PXE Linux Bootloader</title>
><section>
><title>About the TFTP server</title>
><body>
><p>
>TFTP stands for Trivial File Transfer Protocol.  The TFTP server is going to supply the slaves' with a kernel and an initial filesystem.  All of the slave's kernels and filesystems will be stored on the TFTP server, so it's probably a good idea to make the master the TFTP server.
></p>
></body>
>
></section>
><section>
><title>About PXELINUX</title>
><body>
><p>
>PXELINUX is the network bootloader equivalent to LILO or GRUB and will be served via TFTP.  It is essentially a tiny set of instructions that tells the client where to locate its kernel and initial filesystem and allows for various kernel options.
></p>
></body>
></section>
>
><section>
><title>Before you get started</title>
><body>
><p>
>You will need to get the pxelinux.o file which comes in the SYSLINUX package by H. Peter Anvin.  You can install this package by typing:
></p>
><pre caption="installing syslinux">
># <c>emerge syslinux</c>
></pre>
></body>
></section>
>
><section>
><title>Installing the TFTP server</title>
><body>
><p>
>A highly recommended tftp server is available in the tftp-hpa package.  This tftp server happens to be written by the author of SYSLINUX and it works very well with pxelinux.To install simply type:
></p>
><pre caption="installing the tfp server">
># <c>emerge tftp-hpa</c>
></pre>
></body>
></section>
>
><section>
><title>Setting up PXELINUX</title>
><body>
><p>
>Before you start your tftp server you need to setup pxelinux.  First copy the pxelinux binary into your <path>/tftpboot</path> directory by typing:
></p>
><pre caption="setting up the remote bootloader">
># <c>cp /usr/lib/syslinux/pxelinux.0 /tftpboot</c>
># <c>mkdir /tftpboot/pxelinux.cfg</c>
># <c>touch /tftpboot/pxelinux.cfg/default</c>
></pre>
><p>
>This will create a default bootloader configuration file.  The binary <path>pxelinux.0</path> will look in the <path>pxelinux.cfg</path> directory for a file whose name is the client's MAC address in octal.  If it does not find that file it will use this default file.  For now just setup the default file.  Edit the default file so it looks like this:
></p>
><pre caption="sample pxelinux.cfg/default">
>DEFAULT gentoo_1.4
>LABEL gentoo_1.4
>KERNEL bzImage
>APPEND nfsroot=192.168.1.20:/tftpboot/192.168.1.21
>IPAPPEND 1
></pre>
><p>
>The <c>DEFAULT</c> tag directs pxelinux to a certain <c>LABEL</c> so that you don't have to manually type in a tag when the client boots.  If you wanted to you could have multiple <c>LABEL</c> tags each with different options; in this example there is only going to be one.  The <c>KERNEL</c> tag specifies the location of the kernel.  This location is relative to <path>/tftpboot</path>.  The <c>APPEND</c> tag appends kernel initialization options, since we compiled the slave kernel with <c>NFS_ROOT_SUPPORT</c>, we will specify the nfsroot here.  The first IP is the master's IP and the second IP is the folder that was created in <path>/tftpboot</path> to store the slave's initial filesystem. 
></p>
></body>
></section>
><section>
><title>Configuring the TFTP server</title>
><body>
><p>
>Edit <path>/etc/conf.d/in.tftpd</path>.  You need to specify the tftproot directory with <c>INTFTPD_PATH</c> and any command line options with <c>INTFTPD_OPTS</c>.  It should look something like this:
></p>
><pre caption="sample /etc/conf.d/in.tftpd">
>INTFTPD_PATH="/tftpboot"
>INTFTPD_OPTS="-l -v -s ${INTFTPD_PATH}"
></pre>
><p>
>The -l option indicates that this server listens in stand alone mode so you dont have to run inetd, the -v indicates that log/error messages should be verbose.  The -s /tftpboot specifies the root of your tftp server.
></p>
></body>
></section>
>
><section>
><title>Starting the the TFTP Server</title>
><body>
><p>
>To start the tftp server type:
></p>
><pre caption="starting the master's tfp server">
># <c>/etc/init.d/in.tftpd start</c>
></pre>
><p>
>This should start the tftp server with the options you specified in the <path>/etc/conf.d/in.tfpd</path>.
>If you want this server to begin at startup type:
></p>
><pre caption="adding the tfp server to the master's default run level">
># <c>rc-update add in.tftpd default</c>
></pre>
></body>
></section>
>
><section>
><title>Troubleshooting the network boot process</title>
><body>
><p>
>There are a few things you can do to debug the network boot process.  Primarily you can use a tool called <c>tcpdump</c>.  To install <c>tcpdump</c> type:
></p>
><pre caption="installing tcpdump">
># <c>emerge tcpdump</c>
></pre>
><p>
>Now you can listen to various network traffic and make sure your client/server interactions are functioning.  If something isn't working there are a few things you might want to check.  First make sure that the client/server is physically connected properly and that the networking cables are not damaged. If your client/server is not receiving requests on a particular port make sure that there is no firewall interference.  To listen to interaction between two computers type:
></p>
><pre caption="listening to client and server interaction via tcpdump">
># <c>tcpdump host client_ip and server_ip</c>
></pre>
><p>
>You can also use <c>tcpdump</c> to listen on particular port such as the tftp port by typing:
></p>
><pre caption="listening to the tftp server">
># <c>tcpdump port 69</c>
></pre>
><p>
>A common error you might receive is: PXE-E32: TFTP open time-out
>This is probably due to firewall issues.  If you are using <c>TCPwrappers</c>, you might want to check <path>/etc/hosts.allow</path> and <path>etc/hosts.deny</path> and make sure that they are configured properly. The client should be allowed to connect to the server.
></p>
></body>
></section>
></chapter>
>
><chapter>
><title>Configuring the NFS server</title>
><section>
><title>About the NFS server</title>
><body>
><p>
>NFS stands for Network File System.  The NFS server will be used to serve directories to the slave. This part can be somewhat personalized later, but for right now all we want is a prelimary slave node to boot diskless.
></p>
></body>
></section>
><section>
><title>About Portmapper</title>
><body>
><p>
>Various client/server services do not listen on a particular port, but instead rely on RPCs (Remote Procedure Calls).  When the service is initialized it listens on a random port and then registers this port with the Portmapper utility.  NFS is reliant on RPCs and thus requires Portmapper to be running before it is started.
></p>
></body>
></section>
>
><section>
><title>Before you start</title>
><body>
><p>The NFS Server needs kernel level support so if you don't have this you should recompile your master's kernel.  To double check your master's kernel configuration type:
></p>
><pre caption="checking for NFS specific options">
># <c>cat /usr/src/linux/.config | grep NFS</c>
></pre>
><p>
>You should see output that looks something like this if your kernel has been properly configured:
></p>
><pre caption="proper NFS specific options in the master's kernel configuration">
>CONFIG_NFS_FS=y
>CONFIG_NFS_V3=y
># CONFIG_ROOT_NFS is not set
>CONFIG_NFSD=y
>CONFIG_NFSD_V3=y
># CONFIG_NCPFS_NFS_NS is not set
></pre>
></body>
></section>
>
><section>
><title>Installing the NFS server</title>
><body>
><p>
>The NFS package that can be acquired via portage by typing:
></p>
><pre caption="installing nfs-utils">
># <c>emerge nfs-utils</c>
></pre>
><p>
>This package will emerge a portmapping utility, nfs server, and nfs client utilities and will automatically handle initialization dependencies.
></p>
></body>
></section>
>
><section>
><title>Configuring the NFS server</title>
><body>
><p>
>There are three major configuration files you will have to edit:
></p>
><pre caption="nfs configuration files">
>/etc/exports
>/tftpboot/192.168.1.21/etc/fstab
>/etc/conf.d/nfs
></pre>
><p>
>The <path>/etc/exports</path> file specifies how, to who and what to export via NFS.  The slave's fstab will be altered so that it can mount the NFS filesystems that the master is exporting.
></p>
><p>
>A typical <path>/etc/exports</path> for the master should look something like this:
></p>
><pre caption="sample master /etc/exports">
><comment># one line like this for each slave</comment>
>/tftpboot/192.168.1.21   192.168.1.21(rw,no_root_squash,no_all_squash)
><comment># if you want to have a shared cluster log</comment>
>/var/log   192.168.1.21(rw,no_root_squash,no_all_squash)
></pre>
><p>
>The first field indicates the directory to be exported and the next field indicates to who and how.  The who column tells NFS who should be allowed to mount that particular directory. The how column describes what the mounting client can do to the filesystem; <c>ro</c> for read only and <c>rw</c> for read/write.  The <c>no_root_squash</c> and <c>no_all_squash</c> options are important for diskless clients that are writing to the disk, so that they don't get "squashed" when making I/O requests.  The slave's fstab file,<path>/tftpboot/192.168.1.21/etc/fstab</path>, should look something like this:
></p>
><pre caption="sample slave /etc/fstab">
><comment># these entries are essential</comment>
>master:/tftpboot/192.168.1.21   /               nfs     hard,intr,rw    0 1
>none                            /proc           proc    defaults        0 0
>none                            /mfs            mfs     dfsa=1          0 0
><comment># useful but superfluous</comment>
>master:/var/log			/var/log	nfs	hard,intr,rw	0 0
></pre>
><p>
>In this example, <e>master</e> is just the hostname of the master but it could easily be the IP of the master.  The first field indicates the directory to be mounted and the second field indicates where.  The third field describes the filesystem and  should be NFS for any NFS mounted directory.  The MFS filesystem is used by openMosix and will be mounted on the <path>/mfs</path> stub.  The fourth field indicates various options that will be used in the mounting process (see mount(1) for info on mount options).  I had difficulty with soft mount points so I made them all hard, but you should look into various <path>/etc/fstab</path> options to make your cluster more efficient. 
></p>
><p>
>The last file you should edit is the <path>/etc/conf.d/nfs</path> file which describes a few options for nfs when it is initialized.  It should look something like this:
></p>
><pre caption="sample master /etc/init.d/nfs">
># Config file for /etc/init.d/nfs
>
># Number of servers to be started up by default
>RPCNFSDCOUNT=20
>
># Options to pass to rpc.mountd
>RPCMOUNTDOPTS=""
></pre>
><p>
>You should change <c>RPCNFSDCOUNT</c> to the number of diskless nodes on the cluster.  
></p>
></body>
></section>
><section>
><title>Starting the NFS server</title>
><body>
><p>
>You should start the nfs server with its init script located in <path>/etc/init.d</path> by typing:
></p>
><pre caption="starting the master's nfs server">
># <c>/etc/init.d/nfs start</c>
></pre>
><p>
>If you want to this script to start when the system boots simply type:
></p>
><pre caption="adding the nfs server to the master's default run level">
># <c>rc-update add nfs default</c>
></pre>
></body>
></section>
></chapter>
>
><chapter>
><title>Configuring openMosix</title>
><section>
><title>Before you get started</title>
><body>
><p>
>Everything we have done up to now is preparation for the network boot of a fully functioning diskless client. Now all there is to do is to get this diskless client to communicate via openMosix with its master.  The first thing you will want to do is make sure you can actually network boot your test slave client.  If this does not work you need to consult the previous troubleshooting sections before progressing to this section.  To network boot the client:
></p>
><ul>
><li>Turn on client</li>
><li>Change/interrupt boot sequence so that client boots from ethernet card via PXE</li>
></ul>
></body>
></section>
><section>
><title>Installing openMosix user tools</title>
><body>
><p>
>In order for the cluster to migrate processes, a few user-land binaries need to be installed.  Additionally, an openMosix server needs to be started in order for a node to join a cluster and fully utilize the openMosix kernel.  To get the aforementioned binaries and files type:
></p>
><pre caption="installing openMosix userland utilities">
># <c>emerge openmosix-user</c>
></pre>
></body>
></section>
><section>
><title>Configuring openMosix server</title>
><body>
><p>
>There's only one main file that needs to be edited in order to get process migration via openMosix running smoothly.  First we need to create <path>/etc/mosix.map</path>.  This file merely serves as a map to the cluster by assigning IP addresses to nodes.  To setup <path>/etc/mosix.map</path> type:
></p>
><pre caption="editing /etc/mosix.map">
># <c>vim /etc/mosix.map</c>
></pre>
><p>
>Edit the file so that it looks something like this:
></p>
><pre caption="a sample /etc/mosix.map">
>1	192.168.1.20	1
>2	192.168.1.21	9
>11	192.168.1.29	1
></pre>
><p>
>The first field specifies the node number.  Generally its a good idea to have sequential and meaningful numbered nodes.  The second field assigns a static IP number to that particular node.  The final number specifies a range of IP address.  Thus the same cluster could be implemented alternately like this:
></p>
><pre caption="an alternate sample /etc/mosix.map">
>1	192.168.1.20	11
></pre>
><p>
>Which would allow for dynamic node number assignment in conjunction with dynamic IP addresses.  This file should be the same and present on every node in your cluster because this map represents the topology of your cluster.  
><note>Not all nodes need to be up and running for openMosix to function correctly.</note>
></p>
></body>
></section>
><section>
><title>Starting openMosix</title>
><body>
><p>
>Before starting openMosix you should copy some of the master's filesystem onto the slave by typing:
></p>
><pre caption="creating a preliminary slave filesystem">
># <c>cp -r /bin /tftpboot/192.168.1.21/bin </c>
># <c>cp -r /sbin /tftpboot/192.168.1.21/sbin </c>
># <c>cp -r /lib /tftpboot/192.168.1.21/lib </c>
># <c>cp -r /usr/bin /tftpboot/192.168.1.21/usr/bin </c>
># <c>cp -r /usr/sbin /tftpboot/192.168.1.21/usr/sbin </c>
># <c>cp -r /usr/lib /tftpboot/192.168.1.21/usr/lib </c>
># <c>cp /etc/mosix.map /tftpboot/192.168.1.21/etc </c>
></pre>
><p>
>This should make the slave's file system in sync with the master's and provide needed binaries while still preserving slave specific files. If you don't have the disk space for this consult the section on trimming the filesystem. To start openMosix on the master node type:
></p>
><pre caption="starting openMosix on master!">
># <c>/etc/init.d/openmosix start</c>
></pre>
><p>
>Then on the freshly rebooted slave type the same thing.  If all goes well you should be able to test your openMosix configuration by typing:
></p>
><pre caption="using mosctl">
># <c>mosctl status 1</c>
># <c>mosctl status 2</c>
></pre>
><p>
>This will tell you if a particular node number is up and on the cluster.  Hopefully you got the brief but optimistic answer "up." on both the slave and the master.
></p>
></body>
></section>
></chapter>
>
><chapter>
><title>Configuring the final slave filesystem</title>
><section>
><title>About the slave filesystem</title>
><body>
><p>
>The slave filesystem right now is functional but far too bulky to be used in a strictly computational sense.  Any libraries or binaries that the slave needs to execute processes can be obtained from the master via MFS (Mosix File System), therefore only a minimal amount of files are necessary.  In my particular implementation booting up a slave does not even even execute <c>/bin/login</c> making it impossible to fix any problems after start up.
></p>
></body>
></section>
><section>
><title>Before you begin</title>
><body>
><p>
>Double check and make sure that openMosix between the master and slave is functional.  Additionally you may want to boot up additional slaves and make sure that this does not effect the network boot process or cluster performance.
></p>
></body>
></section>
><section>
><title>Trimming the filesystem part.1</title>
><body>
><p>
>At the end of this section I've included the exact layout of my file system (<uri link="#doc_chap8_sect2">appendix 2</uri>).  You might want to trim away more or less but the important part is this trimming process should be done in two parts.  First you will want to get rid of everything you consider extraneous to the slave, except the files that allow you to physically log into the machine and check its logs to see whats going on. See <uri link="#doc_chap8_pre1">appendix 1</uri> for a list of files essential to system login.
></p>
></body>
></section>
><section>
><title>Trimming the filesystem part. 2</title>
><body>
><p>
>If you're completely satisfied with the functioning of the slave then you should proceed to remove the files not listed below.  Additionally you may want to edit <path>tftpboot/192.168.1.21/etc/inittab</path> so that it doesn't ever spawn a terminal.  It can be pretty basic like this:
></p>
><pre caption="sample slave /etc/inittab">
>id:3:initdefault:
>   
>si:S:sysinit:/sbin/rc boot
>l0:0:wait:/sbin/rc shutdown
>l1:1:wait:/sbin/rc single
>l2:2:wait:/sbin/rc nonetwork
>l3:3:wait:/sbin/rc default
>l4:4:wait:/sbin/rc default
>l5:5:wait:/sbin/rc default
>l6:6:wait:/sbin/rc reboot
></pre>
><p>
>Additionally, you may have to manually edit some of the initialization dependencies.  I had trouble removing <e>checkroot</e> and <e>checkfs</e> from the initialization scripts using the <c>rc-update</c> script.  These functions don't make sense for a diskless node and were even trying to do file system checks on  the NFS root, which the master didn't like.  I recommend completely removing these scripts from your run levels and make sure that none of the other scripts still claim them as dependencies.
></p>
></body>
></section>
></chapter>
>
><chapter>
><title>Appendix</title>
><section>
><title>Login/System logging files</title>
><body>
><pre caption="sample files for slave login">
><comment># files for login</comment>
>slave/bin/login
>slave/sbin/sulogin
>slave/sbin/agetty
>slave/etc/pam.d
>slave/etc/passwd
>slave/etc/securetty
>slave/etc/security
>slave/etc/shells
>slave/lib/libpam.so.0
>slave/lib/libpam_misc.so.0
>
><comment># files for logging</comment>
>slave/etc/init.d/sysklogd
>slave/etc/runlevels/default/sysklogd
>slave/sbin/klogd
>slave/sbin/syslogd
></pre>
></body>
></section>
>
><section>
><title>Sample slave filesystem</title>
><body>
><pre caption="sample slave filesystem">
>.:
>total 9
>drwxr-xr-x    2 root     root         1184 Mar 10 13:09 bin
>drwxr-xr-x    2 root     root           48 Mar 10 12:30 dev
>drwxr-xr-x    8 root     root          864 Mar 19 18:31 etc
>drwxr-xr-x    4 root     root         1712 Mar 10 13:12 lib
>drwxr-xr-x    2 root     root           48 Mar 10 12:30 mfs
>drwxr-xr-x    3 root     root           72 Mar 10 12:30 mnt
>drwxr-xr-x    2 root     root           48 Mar 10 12:30 proc
>drwxr-xr-x    2 root     root          640 Mar 10 12:30 sbin
>drwxr-xr-x    4 root     root          112 Mar 19 18:31 tmp
>drwxr-xr-x    6 root     root          144 Mar 10 12:30 var
>
>./bin:
>total 4132
>-rwxr-xr-x    1 root     root       295640 Mar 10 13:12 awk
>-rwxr-xr-x    1 root     root       672648 Mar 10 13:12 bash
>-rwxr-xr-x    1 root     root        14892 Mar 10 13:12 cat
>-rwxr-xr-x    1 root     root        18968 Mar 10 13:12 chgrp
>-rwxr-xr-x    1 root     root        18936 Mar 10 13:12 chmod
>-rwxr-xr-x    1 root     root        20720 Mar 10 13:12 chown
>-rwxr-xr-x    1 root     root        48700 Mar 10 13:12 cp
>-rwxr-xr-x    1 root     root        39652 Mar 10 13:12 date
>-rwxr-xr-x    1 root     root        41116 Mar 10 13:12 dd
>-rwxr-xr-x    1 root     root        30192 Mar 10 13:12 df
>-rwxr-xr-x    1 root     root        69292 Mar 10 13:12 dir
>-rwxr-xr-x    1 root     root        19532 Mar 10 13:12 dircolors
>-rwxr-xr-x    1 root     root         4008 Mar 10 13:12 dmesg
>-rwxr-xr-x    1 root     root        34120 Mar 10 13:12 du
>-rwxr-xr-x    1 root     root        12596 Mar 10 13:12 echo
>-rwxr-xr-x    1 root     root        85060 Mar 10 13:12 egrep
>-rwxr-xr-x    1 root     root        10428 Mar 10 13:12 false
>-rwxr-xr-x    1 root     root        54448 Mar 10 13:12 find
>-rwxr-xr-x    1 root     root       295640 Mar 10 13:12 gawk
>-rwxr-xr-x    1 root     root        85060 Mar 10 13:12 grep
>-rwxr-xr-x    1 root     root         9416 Mar 10 13:12 hostname
>-rwxr-xr-x    1 root     root        50892 Mar 10 13:12 install
>-rwxr-xr-x    1 root     root        23404 Mar 10 13:12 ln
>-rwxr-xr-x    1 root     root        69292 Mar 10 13:12 ls
>-r-xr-xr-x    1 root     root        10200 Mar 10 13:12 migrate
>-rwxr-xr-x    1 root     root        19996 Mar 10 13:12 mkdir
>-rwxr-xr-x    1 root     root        15236 Mar 10 13:12 mkfifo
>-rwxr-xr-x    1 root     root        19724 Mar 10 13:12 mknod
>-rwxr-xr-x    1 root     root         5040 Mar 10 13:12 mktemp
>-r-xr-xr-x    1 root     root        24480 Mar 10 13:12 mosctl
>-r-xr-xr-x    1 root     root        12580 Mar 10 13:12 mosrun
>-rwxr-xr-x    1 root     root        90464 Mar 10 13:12 mount
>-rwxr-xr-x    1 root     root        50048 Mar 10 13:12 mv
>-rwxr-xr-x    1 root     root       460100 Mar 10 13:12 nc_mosix
>-r-xr-xr-x    1 root     root        64980 Mar 10 13:12 ps
>-rwxr-xr-x    1 root     root         3724 Mar 10 13:12 readlink
>-rwxr-xr-x    1 root     root        27476 Mar 10 13:12 rm
>-rwxr-xr-x    1 root     root        12148 Mar 10 13:12 rmdir
>-rwxr-xr-x    1 root     root       519776 Mar 10 13:12 sed
>-rwxr-xr-x    1 root     root       672648 Mar 10 13:12 sh
>-rwxr-xr-x    1 root     root        12556 Mar 10 13:12 sleep
>-rwxr-xr-x    1 root     root        27512 Mar 10 13:12 stat
>-rwxr-xr-x    1 root     root        10804 Mar 10 13:12 sync
>-rwxr-xr-x    1 root     root         5948 Mar 10 13:12 tempfile
>-rwxr-xr-x    1 root     root        27160 Mar 10 13:12 touch
>-rwxr-xr-x    1 root     root        10428 Mar 10 13:12 true
>-rwxr-xr-x    1 root     root        14524 Mar 10 13:12 uname
>
>./dev:
>total 0
>
>./etc:
>total 136
>-rw-r--r--    1 root     root           44 Mar 10 13:12 adjtime
>drwxr-xr-x    2 root     root          352 Mar 10 12:30 conf.d
>drwxr-xr-x    2 root     root           72 Mar 10 12:30 devfs.d
>-rw-r--r--    1 root     root         4991 Mar 10 13:12 devfsd.conf
>drwxr-xr-x    2 root     root          160 Mar 10 12:30 dhcpc
>drwxr-xr-x    2 root     root          248 Mar 10 12:30 env.d
>-rw-r--r--    1 root     root          174 Mar 19 18:26 fstab
>-rw-r--r--    1 root     root          676 Mar 10 13:12 group
>-rw-r--r--    1 root     root           21 Mar 10 13:38 hostname
>-rw-r--r--    1 root     root          766 Mar 10 13:40 hosts
>drwxr-xr-x    2 root     root          544 Mar 10 12:30 init.d
>-rw-r--r--    1 root     root         1501 Mar 10 13:12 inittab
>-rw-r--r--    1 root     root         3753 Mar 10 13:12 inputrc
>-rw-------    1 root     root           60 Mar 19 18:31 ioctl.save
>-rw-r--r--    1 root     root        15134 Mar 10 13:12 ld.so.cache
>-rw-r--r--    1 root     root          194 Mar 10 13:12 ld.so.conf
>-rw-r--r--    1 root     root           49 Mar 19 17:01 mosix.map
>-rw-r--r--    1 root     root          256 Mar 19 18:31 mtab
>-rw-r--r--    1 root     root          772 Mar 10 13:12 profile
>-rw-r--r--    1 root     root          344 Mar 10 13:12 profile.env
>-rw-r--r--    1 root     root         1846 Mar 10 13:12 protocols
>-rw-r--r--    1 root     root         2819 Mar 10 13:12 rc.conf
>-rw-r--r--    1 root     root           71 Mar 10 13:12 resolv.conf
>-rwxr-xr-x    1 root     root        13864 Mar 10 13:12 rmt
>-rw-r--r--    1 root     root         1615 Mar 10 13:12 rpc
>drwxr-xr-x    6 root     root          152 Mar 10 12:30 runlevels
>-rw-r--r--    1 root     root        13521 Mar 10 13:12 services
>-rw-r--r--    1 root     root          381 Mar 10 13:12 sysctl.conf
>-rw-r--r--    1 root     root         2332 Mar 10 13:12 syslog.conf
>
>./etc/conf.d:
>total 44
>-rw-r--r--    1 root     root          263 Mar 10 13:12 gpm
>-rw-r--r--    1 root     root          141 Mar 10 13:12 in.tftpd
>-rw-r--r--    1 root     root          410 Mar 10 13:12 iptables
>-rw-r--r--    1 root     root          212 Mar 10 13:12 local.start
>-rw-r--r--    1 root     root          326 Mar 10 13:12 local.stop
>-rw-r--r--    1 root     root          944 Mar 10 13:12 net
>-rw-------    1 root     root         3307 Mar 10 13:12 net.ppp0
>-rw-r--r--    1 root     root          350 Mar 10 13:12 nfs
>-rw-r--r--    1 root     root         1351 Mar 10 13:12 rc
>-rw-r--r--    1 root     root          113 Mar 10 13:12 sysklogd
>-rw-r--r--    1 root     root          803 Mar 10 13:12 xfs
>
>./etc/devfs.d:
>total 0
>
>./etc/dhcpc:
>total 12
>-rw-------    1 root     root          136 Mar 10 13:12 dhcpcd-eth0.cache
>-rw-r--r--    1 root     root          449 Mar 10 13:12 dhcpcd-eth0.info
>-rw-r--r--    1 root     root          449 Mar 10 13:12 dhcpcd-eth0.info.old
>
>./etc/env.d:
>total 28
>-rw-r--r--    1 root     root          355 Mar 10 13:12 00basic
>-rw-r--r--    1 root     root           32 Mar 19 18:31 01hostname
>-rw-r--r--    1 root     root           69 Mar 10 13:12 05gcc
>-rw-r--r--    1 root     root           33 Mar 10 13:12 09opengl
>-rw-r--r--    1 root     root          182 Mar 10 13:12 10xfree
>-rw-r--r--    1 root     root           32 Mar 10 13:12 40vim
>-rw-r--r--    1 root     root           10 Mar 10 13:12 70less
>
>./etc/init.d:
>total 88
>-rwxr-xr-x    1 root     root         2851 Mar 10 13:12 bootmisc
>-rwxr-xr-x    1 root     root         1363 Mar 10 13:12 checkroot
>-rwxr-xr-x    1 root     root         1514 Mar 10 13:12 clock
>-rwxr-xr-x    1 root     root          744 Mar 10 13:12 depscan.sh
>-rwxr-xr-x    1 root     root         7002 Mar 10 13:12 functions.sh
>-rwxr-xr-x    1 root     root          822 Mar 10 13:12 hostname
>-rwxr-xr-x    1 root     root          727 Mar 10 13:12 local
>-rwxr-xr-x    1 root     root         1041 Mar 10 13:12 localmount
>-rwxr-xr-x    1 root     root          426 Mar 10 13:12 net.lo
>-rwxr-xr-x    1 root     root         2580 Mar 10 13:12 netmount
>-rwxr-xr-x    1 root     root          608 Mar 10 13:12 openmosix
>-rwxr-xr-x    1 root     root         1068 Mar 10 13:12 portmap
>-rwxr-xr-x    1 root     root           42 Mar 10 13:12 restart.sh
>-rwxr-xr-x    1 root     root          384 Mar 10 13:12 rmnologin
>-rwxr-xr-x    1 root     root        14554 Mar 10 13:12 runscript.sh
>-rwxr-xr-x    1 root     root           90 Mar 10 13:12 slave.sh
>-rwxr-xr-x    1 root     root          963 Mar 10 13:12 sysklogd
>-rwxr-xr-x    1 root     root          894 Mar 10 13:12 urandom
>
>./etc/runlevels:
>total 2
>drwxr-xr-x    2 root     root          288 Mar 10 13:34 boot
>drwxr-xr-x    2 root     root          200 Mar 10 14:18 default
>drwxr-xr-x    2 root     root           96 Mar 10 12:30 nonetwork
>drwxr-xr-x    2 root     root           72 Mar 10 12:30 single
>
>./etc/runlevels/boot:
>total 0
>lrwxrwxrwx    1 root     root           21 Mar 10 13:34 bootmisc -> ../../init.d/bootmisc
>lrwxrwxrwx    1 root     root           22 Mar 10 13:34 checkroot -> ../../init.d/checkroot
>lrwxrwxrwx    1 root     root           18 Mar 10 13:34 clock -> ../../init.d/clock
>lrwxrwxrwx    1 root     root           21 Mar 10 13:34 hostname -> ../../init.d/hostname
>lrwxrwxrwx    1 root     root           23 Mar 10 13:34 localmount -> ../../init.d/localmount
>lrwxrwxrwx    1 root     root           19 Mar 10 13:34 net.lo -> ../../init.d/net.lo
>lrwxrwxrwx    1 root     root           22 Mar 10 13:34 rmnologin -> ../../init.d/rmnologin
>lrwxrwxrwx    1 root     root           20 Mar 10 13:34 urandom -> ../../init.d/urandom
>
>./etc/runlevels/default:
>total 0
>lrwxrwxrwx    1 root     root           18 Mar 10 13:33 local -> ../../init.d/local
>lrwxrwxrwx    1 root     root           21 Mar 10 13:33 netmount -> ../../init.d/netmount
>lrwxrwxrwx    1 root     root           22 Mar 10 13:21 openmosix -> ../../init.d/openmosix
>lrwxrwxrwx    1 root     root           20 Mar 10 13:33 portmap -> ../../init.d/portmap
>lrwxrwxrwx    1 root     root           21 Mar 10 14:18 sysklogd -> ../../init.d/sysklogd
>
>./etc/runlevels/nonetwork:
>total 4
>-rwxr-xr-x    1 root     root          727 Mar 10 13:12 local
>
>./etc/runlevels/single:
>total 0
>
>./lib:
>total 5901
>-rwxr-xr-x    1 root     root         5560 Mar 10 13:12 cpp
>drwxr-xr-x    3 root     root          120 Mar 19 18:31 dev-state
>-rwxr-xr-x    1 root     root        90174 Mar 10 13:12 ld-linux.so.2
>-rwxr-xr-x    1 root     root        12977 Mar 10 13:12 libanl-2.3.1.so
>-rwxr-xr-x    1 root     root        12977 Mar 10 13:12 libanl.so.1
>-rwxr-xr-x    1 root     root      1425362 Mar 10 13:12 libc-2.3.1.so
>-rwxr-xr-x    1 root     root      1425362 Mar 10 13:12 libc.so.6
>-rwxr-xr-x    1 root     root        22093 Mar 10 13:12 libcrypt-2.3.1.so
>-rwxr-xr-x    1 root     root        22093 Mar 10 13:12 libcrypt.so.1
>-rw-r--r--    1 root     root       313338 Mar 10 13:12 libcurses.so
>-rwxr-xr-x    1 root     root        12065 Mar 10 13:12 libdl-2.3.1.so
>-rwxr-xr-x    1 root     root        12065 Mar 10 13:12 libdl.so.2
>-rwxr-xr-x    1 root     root       106005 Mar 10 13:12 libext2fs.so
>-rwxr-xr-x    1 root     root       183443 Mar 10 13:12 libm-2.3.1.so
>-rwxr-xr-x    1 root     root       183443 Mar 10 13:12 libm.so.6
>-rwxr-xr-x    1 root     root        14194 Mar 10 13:12 libmemusage.so
>-rw-r--r--    1 root     root       313338 Mar 10 13:12 libncurses.so
>-rw-r--r--    1 root     root       313338 Mar 10 13:12 libncurses.so.5
>-rw-r--r--    1 root     root       313338 Mar 10 13:12 libncurses.so.5.3
>-rwxr-xr-x    1 root     root        88950 Mar 10 13:12 libnsl-2.3.1.so
>-rwxr-xr-x    1 root     root        88950 Mar 10 13:12 libnsl.so.1
>-rwxr-xr-x    1 root     root        50016 Mar 10 13:12 libnss_compat-2.3.1.so
>-rwxr-xr-x    1 root     root        50016 Mar 10 13:12 libnss_compat.so.2
>-rwxr-xr-x    1 root     root        17237 Mar 10 13:12 libnss_dns-2.3.1.so
>-rwxr-xr-x    1 root     root        17237 Mar 10 13:12 libnss_dns.so.2
>-rwxr-xr-x    1 root     root        42990 Mar 10 13:12 libnss_files-2.3.1.so
>-rwxr-xr-x    1 root     root        42990 Mar 10 13:12 libnss_files.so.2
>-rwxr-xr-x    1 root     root        18490 Mar 10 13:12 libnss_hesiod-2.3.1.so
>-rwxr-xr-x    1 root     root        18490 Mar 10 13:12 libnss_hesiod.so.2
>-rwxr-xr-x    1 root     root        41099 Mar 10 13:12 libnss_nis-2.3.1.so
>-rwxr-xr-x    1 root     root        41099 Mar 10 13:12 libnss_nis.so.2
>-rwxr-xr-x    1 root     root        48280 Mar 10 13:12 libnss_nisplus-2.3.1.so
>-rwxr-xr-x    1 root     root        48280 Mar 10 13:12 libnss_nisplus.so.2
>-rwxr-xr-x    1 root     root         6222 Mar 10 13:12 libpcprofile.so
>-r-xr-xr-x    1 root     root        39184 Mar 10 13:12 libproc.so
>-r-xr-xr-x    1 root     root        39184 Mar 10 13:12 libproc.so.2.0.10
>-rwxr-xr-x    1 root     root        83562 Mar 10 13:12 libpthread-0.10.so
>-rwxr-xr-x    1 root     root        83562 Mar 10 13:12 libpthread.so.0
>-rwxr-xr-x    1 root     root        70819 Mar 10 13:12 libresolv-2.3.1.so
>-rwxr-xr-x    1 root     root        70819 Mar 10 13:12 libresolv.so.2
>-rwxr-xr-x    1 root     root        35371 Mar 10 13:12 librt-2.3.1.so
>-rwxr-xr-x    1 root     root        35371 Mar 10 13:12 librt.so.1
>-rwxr-xr-x    1 root     root        23317 Mar 10 13:12 libsandbox.so
>-rwxr-xr-x    1 root     root        22329 Mar 10 13:12 libthread_db-1.0.so
>-rwxr-xr-x    1 root     root        22329 Mar 10 13:12 libthread_db.so.1
>-rwxr-xr-x    1 root     root        10997 Mar 10 13:12 libutil-2.3.1.so
>-rwxr-xr-x    1 root     root        10997 Mar 10 13:12 libutil.so.1
>drwxr-xr-x    3 root     root          104 Mar 10 13:12 rcscripts
>
>./lib/dev-state:
>total 1
>srw-rw-rwT    1 root     root            0 Mar 19 18:31 log
>drwxr-xr-x    2 root     root           48 Mar 10 12:30 vc
>
>./lib/dev-state/vc:
>total 0
>
>./lib/rcscripts:
>total 13
>drwxr-xr-x    2 root     root          176 Mar 10 13:12 awk
>-rwxr-xr-x    1 root     root        10628 Mar 10 13:12 filefuncs.so
>
>./lib/rcscripts/awk:
>total 20
>-rw-r--r--    1 root     root         3585 Mar 10 13:12 cachedepends.awk
>-rw-r--r--    1 root     root         2502 Mar 10 13:12 functions.awk
>-rw-r--r--    1 root     root         7932 Mar 10 13:12 gendepends.awk
>-rw-r--r--    1 root     root         4064 Mar 10 13:12 genenviron.awk
>
>./mfs:
>total 0
>
>./mnt:
>total 0
>
>./proc:
>total 0
>
>./sbin:
>total 1304
>-rwxr-xr-x    1 root     root          744 Mar 10 13:12 depscan.sh
>-rwxr-xr-x    1 root     root        35664 Mar 10 13:12 devfsd
>-rwxr-xr-x    1 root     root         7002 Mar 10 13:12 functions.sh
>-rwxr-xr-x    1 root     root         9260 Mar 10 13:12 halt
>-rwxr-xr-x    1 root     root        30292 Mar 10 13:12 hwclock
>-rwxr-xr-x    1 root     root        60200 Mar 10 13:12 ifconfig
>-rwxr-xr-x    1 root     root        31512 Mar 10 13:12 init
>-rwxr-xr-x    1 root     root         9452 Mar 10 13:12 killall5
>-rwxr-xr-x    1 root     root        22492 Mar 10 13:12 klogd
>-rwxr-xr-x    1 root     root       463372 Mar 10 13:12 ldconfig
>-rwxr-xr-x    1 root     root         9452 Mar 10 13:12 pidof
>-rwxr-xr-x    1 root     root        30300 Mar 10 13:12 portmap
>-rwxr-xr-x    1 root     root         9260 Mar 10 13:12 poweroff
>-rwxr-xr-x    1 root     root        10786 Mar 10 13:12 rc
>-rwxr-xr-x    1 root     root         7319 Mar 10 13:12 rc-daemon.sh
>-rwxr-xr-x    1 root     root        63080 Mar 10 13:12 rpc.mountd
>-rwxr-xr-x    1 root     root         2936 Mar 10 13:12 runscript
>-rwxr-xr-x    1 root     root        14554 Mar 10 13:12 runscript.sh
>-r-xr-xr-x    1 root     root        13972 Mar 10 13:12 setpe
>-rwxr-xr-x    1 root     root       410572 Mar 10 13:12 sln
>-rwxr-xr-x    1 root     root        18876 Mar 10 13:12 start-stop-daemon
>-rwxr-xr-x    1 root     root        27748 Mar 10 13:12 syslogd
>
>./tmp:
>total 0
>
>./var:
>total 2
>drwxr-xr-x    2 root     root           48 Mar 10 12:30 empty
>drwxr-xr-x    3 root     root           96 Mar 19 18:31 lock
>drwxr-xr-x    2 root     root          464 Mar 10 12:30 log
>drwxr-xr-x    2 root     root          168 Mar 19 18:31 run
>
>./var/empty:
>total 0
>
>./var/lock:
>total 1
>drwxr-xr-x    2 root     root           72 Mar 19 18:31 subsys
>
>./var/lock/subsys:
>total 0
>-rw-r--r--    1 root     root            0 Mar 19 12:31 mosix
>
>./var/log:
>total 148
>-rw-r--r--    1 root     root            0 Mar 10 13:12 auth.log
>-rw-r--r--    1 root     root          138 Mar 10 14:03 daemon.log
>-rw-r--r--    1 root     root         8928 Mar 10 14:03 debug
>-rw-r--r--    1 root     root            0 Mar 10 13:12 imapd.log
>-rw-r--r--    1 root     root        39823 Mar 10 14:03 kern.log
>-rw-r--r--    1 root     root            0 Mar 10 13:12 lpr.log
>-rw-r--r--    1 root     root            0 Mar 10 13:12 mail.err
>-rw-r--r--    1 root     root            0 Mar 10 13:12 mail.info
>-rw-r--r--    1 root     root            0 Mar 10 13:12 mail.log
>-rw-r--r--    1 root     root            0 Mar 10 13:12 mail.warn
>-rw-r--r--    1 root     root        30804 Mar 10 14:03 messages
>-rw-r--r--    1 root     root            0 Mar 10 13:12 ppp.log
>-rw-r--r--    1 root     root        40055 Mar 10 14:03 syslog
>-rw-r--r--    1 root     root            0 Mar 10 13:12 user.log
>-rw-r--r--    1 root     root            0 Mar 10 13:12 uucp.log
>-rw-rw-r--    1 root     utmp        17280 Mar 19 18:31 wtmp
>
>./var/run:
>total 16
>-rw-r--r--    1 root     root            4 Mar 19 18:31 klogd.pid
>-rw-------    1 root     root          512 Mar 19 18:31 random-seed
>-rw-r--r--    1 root     root            4 Mar 19 18:31 syslogd.pid
>-rw-rw-r--    1 root     utmp         1536 Mar 19 18:31 utmp
></pre>
></body>
></section>
><section>
><title>Notes on use of remote shell and login</title>
><body>
><p>
>In other HOWTOs I came across the use of inetd in conjunction with rshd and rlogind or the use of ssh with RSA authentication.  Rhost authentication is plain insecure but both are unnecessary to the functioning of the cluster.  I was a little confused as to why this was necessary because remote process calls and such are handled at the kernel level, until I came across an application called openMosix View.  OpenMosix view is a bundle of GUI applications designed to make managing your cluster easier and does in fact require one of the remote access methods above to be in place.  If you're going to use openMosix View then you will have to add  more to the sample slave filesystem included in this HOWTO which is beyond the scope of this HOWTO.  I hope this just clarifies a few things that weren't apparent to me when I first encountered them.
></p>
></body>
></section>
></chapter>
>
></guide>

Actions: View

Attachments on bug 17897: 11229 | 11543 | 11544 | 11545 | 16321