# modprobe pata_it821x noraid=1
pata_it821x: forcing bypass mode.
pata_it821x: controller in pass through mode.
ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 32 (level, low) -> IRQ 20
ata3: PATA max UDMA/133 cmd 0xC480 ctl 0xC402 bmdma 0xBC00 irq 20
ata4: PATA max UDMA/133 cmd 0xC080 ctl 0xC002 bmdma 0xBC08 irq 20
scsi2 : pata_it821x
ata3.00: ATA-5, max UDMA/100, 80063424 sectors: LBA
ata3.00: ata3: dev 0 multi count 16
ata3.01: ATA-5, max UDMA/100, 80063424 sectors: LBA
ata3.01: ata3: dev 1 multi count 16
ata3.00: configured for UDMA/100
ata3.01: configured for UDMA/100
scsi3 : pata_it821x
ATA: abnormal status 0x8 on port 0xC087
scsi 2:0:0:0: Direct-Access     ATA      FUJITSU MPG3409A 82C4 PQ: 0 ANSI: 5
SCSI device sdb: 80063424 512-byte hdwr sectors (40992 MB)
sdb: Write Protect is off
SCSI device sdb: driver cache: write back
SCSI device sdb: 80063424 512-byte hdwr sectors (40992 MB)
sdb: Write Protect is off
SCSI device sdb: driver cache: write back
 sdb:_
     ^ this is the curser position, cursor doesn't even blink but stays there.