[patch] The patch, in plain-text

longrun-0.9-r2-debian-gcc-3.diff (text/plain), 43.68 KB, created by Scott Paul Robertson on 2004-07-21 20:36:49 UTC

--- longrun-0.9.orig/Makefile
+++ longrun-0.9/Makefile
@@ -1,10 +1,26 @@
-all: longrun README
+include Makeconfig
+
+all: longrun README stamp-po
 
 longrun: longrun.c
-	gcc -g -O2 -W -Wall -o longrun longrun.c
+	gcc -DLOCALEDIR=\"$(LOCALEDIR)\" -g -O2 -W -Wall -o longrun longrun.c
 
 README: longrun.1
 	groff -Tascii -man longrun.1 | col -bx > README
 
+stamp-po:
+	make -C po
+	touch stamp-po
+
+install: all
+	mkdir -p $(DESTDIR)$(BINDIR)
+	install -o root -g root -m 755 longrun $(DESTDIR)$(BINDIR)/longrun
+	mkdir -p $(DESTDIR)$(MANDIR)/man1
+	install -m 644 longrun.1 $(DESTDIR)$(MANDIR)/man1/longrun.1
+	mkdir -p $(DESTDIR)$(MANDIR)/ja/man1
+	install -m 644 longrun.1.ja $(DESTDIR)$(MANDIR)/ja/man1/longrun.1
+	make -C po install
+
 clean:
-	-rm -f longrun README
+	-rm -f longrun README stamp-po *~
+	make -C po clean
--- longrun-0.9.orig/longrun.1
+++ longrun-0.9/longrun.1
@@ -41,7 +41,7 @@
 .SH NAME
 Transmeta(TM) Crusoe(TM) LongRun(TM) utility
 .SH SYNOPSIS
-.B longrun [-c device] [-m device] [-hlpv] [-f flag] [-s low high]
+.B longrun [-c device] [-m device] [-hlpv] [-f flag] [-s low high] [-t num]
 .SH DESCRIPTION
 The
 .I longrun
@@ -107,6 +107,35 @@
 low number cannot be greater than the high number.  The minimum and
 maximum performance values accepted by the CPU are 0 and 100,
 respectively.
+.TP
+-t num
+Set current LongRun Thermal Extensions setting (0 to 8, 8 = off).  Take
+care with -t 0 and -t 1.
+.RS
+.P
+Longrun Thermal Extensions (LTX) is an alternative way to manipulate the
+power saving functionality of the processor, by controlling heat
+dissipation directly.   Settings 2 through 8 represent power utilization
+levels from 25% to 100%, respectively, in 12.5% increments.  NOTE:
+Settings 0 and 1 are listed as 'reserved' in the TM5600 literature.
+Though they appear to represent 0% and 12.5% respectively on the TM5800
+chip, use these settings at your own risk.
+.P
+Interaction with the -s flag:
+Originally intended as a mechanism to use Transmeta chips on fanless
+machines (referred to apocryphally as "coolrun"), the -t flag limits the
+power range of the processor.  The performance range of the processor is
+limited first by the -t flag, and then subsequently the -s flag.  In
+other words, setting both '-s 57 100'  and '-t 7' will result in the
+processor running in the 57 to 75% power range.
+.P
+Notes:
+This functionality may or may not provide you with different performance
+per watt characteristings than the -s flag.  It is provided for
+completeness, and left as an exercise to the reader to decide if it is
+appropriate on their system.  As mentioned above, use the -t 0 and -t 1
+settings with caution.
+.RE
 .SH ENVIRONMENT
 No environment variables are used.
 .SH FILES
--- longrun-0.9.orig/longrun.c
+++ longrun-0.9/longrun.c
@@ -33,12 +33,32 @@
 #include <sys/io.h>
 #include <sys/sysmacros.h>
 #define __USE_UNIX98	/* for pread/pwrite */
+#define __USE_FILE_OFFSET64 /* we should use 64 bit offset for pread/pwrite */
 #include <unistd.h>
 
+#include <libintl.h>
+#define _(Text) gettext(Text)
+
 #define MSR_DEVICE "/dev/cpu/0/msr"
 #define MSR_TMx86_LONGRUN	0x80868010
 #define MSR_TMx86_LONGRUN_FLAGS	0x80868011
 
+#define MSR_TMx86_LRTI_READOUT	0x80868018
+#define MSR_TMx86_LRTI_PERF	0x80868019
+#define MSR_TMx86_LRTI_VOLT_MHZ	0x8086801A
+#define MSR_TMx86_LRTI_DIV_MEM	0x8086801B
+#define MSR_TMx86_LRTI_DIV_IO	0x8086801C
+#define MSR_TMx86_LRTI_GATE	0x8086801D
+
+#define MSR_TMx86_LRTI_SDR_MISC	0x80868030
+#define MSR_TMx86_LRTI_SDR_TIF	0x80868031
+#define MSR_TMx86_LRTI_SDR_MRS	0x80868032
+#define MSR_TMx86_LRTI_SDR_LBT	0x80868033
+#define MSR_TMx86_LRTI_DDR_MISC_TIF	0x80868034
+#define MSR_TMx86_LRTI_DDR_MRS0	0x80868035
+#define MSR_TMx86_LRTI_DDR_MRS1_MRS2	0x80868036
+#define MSR_TMx86_PFTI_MING	0x80868037
+
 #define LONGRUN_MASK(x)		((x) & 0x0000007f)
 #define LONGRUN_RESERVED(x)	((x) & 0xffffff80)
 #define LONGRUN_WRITE(x, y)	(LONGRUN_RESERVED(x) | LONGRUN_MASK(y))
@@ -48,6 +68,7 @@
 #define CPUID_TMx86_PROCESSOR_INFO	0x80860001
 #define CPUID_TMx86_LONGRUN_STATUS	0x80860007
 #define CPUID_TMx86_FEATURE_LONGRUN(x)	((x) & 0x02)
+#define CPUID_TMx86_FEATURE_LRTI(x)	((x) & 0x04)
 
 /* Advanced Thermal Management */
 #define LR_NORTHBRIDGE "/proc/bus/pci/00/00.0"
@@ -70,8 +91,8 @@
 	FILE *stream = status ? stderr : stdout;
 
 	fprintf(stream,
-		"%s %s (%s)\n"
-		"usage: %s [-c device] [-m device] [-hlpv] [-f flag] [-s low high]\n"
+		_("%s %s (%s)\n"
+		"usage: %s [-c device] [-m device] [-hlpv] [-f flag] [-s low high] [-t tlx]\n"
 		" -c device     set CPUID device\n"
 		" -m device     set MSR device\n"
 		" -h            print this help\n"
@@ -80,10 +101,11 @@
 		" -v            be more verbose\n"
 		" -f [flag]     set a LongRun mode flag\n"
 		" -s low high   set current LongRun performance window (0 to 100)\n"
+		" -t tlx        set current LongRun Thermal Extensions setting (0 to 8, 8 = off)\n"
 		"\n"
 		"supported flags:\n"
 		" economy       set economy mode (turn off performance mode)\n"
-		" performance   set performance mode (turn off economy mode)\n",
+		" performance   set performance mode (turn off economy mode)\n"),
 		progname, VERSION, REVDATE, progname);
 
 	exit(status);
@@ -126,32 +148,51 @@
 
 	nb = open(LR_NORTHBRIDGE, O_RDONLY);
 	if (nb < 0) {
-		error_warn("error opening %s", LR_NORTHBRIDGE);
+		error_warn(_("error opening %s"), LR_NORTHBRIDGE);
 		if (errno == ENOENT) {
-			fprintf(stderr, "make sure /proc is mounted\n");
+			fprintf(stderr, _("make sure /proc is mounted\n"));
 		}
 		exit(1);
 	}
 	if (pread(nb, atm, 1, ATM_ADDRESS) != 1) {
-		error_die("error reading %s", LR_NORTHBRIDGE);
+		error_die(_("error reading %s"), LR_NORTHBRIDGE);
+	}
+	close(nb);
+}
+
+/* write Advanced Thermal Management definitions register */
+void write_atm(uint8_t *atm)
+{
+	int nb;
+
+	nb = open(LR_NORTHBRIDGE, O_RDWR);
+	if (nb < 0) {
+		error_warn(_("error opening %s"), LR_NORTHBRIDGE);
+		if (errno == ENOENT) {
+			fprintf(stderr, _("make sure /proc is mounted\n"));
+		}
+		exit(1);
+	}
+	if (pwrite(nb, atm, 1, ATM_ADDRESS) != 1) {
+		error_die(_("error reading %s"), LR_NORTHBRIDGE);
 	}
 	close(nb);
 }
 
 /* note: if an output is NULL, then don't set it */
-void read_msr(long address, int *lower, int *upper)
+void read_msr(loff_t address, int *lower, int *upper)
 {
 	uint32_t data[2];
 
 	if (pread(msr_fd, &data, 8, address) != 8) {
-		error_die("error reading %s", msr_device);
+		error_die(_("error reading %s"), msr_device);
 	}
 
 	if (lower) *lower = data[0];
 	if (upper) *upper = data[1];
 }
 
-void write_msr(long address, int lower, int upper)
+void write_msr(loff_t address, int lower, int upper)
 {
 	uint32_t data[2];
 
@@ -159,17 +200,17 @@
 	data[1] = (uint32_t) upper;
 
 	if (pwrite(msr_fd, &data, 8, address) != 8) {
-		error_die("error writing %s", msr_device);
+		error_die(_("error writing %s"), msr_device);
 	}
 }
 
 /* note: if an output is NULL, then don't set it */
-void read_cpuid(long address, int *eax, int *ebx, int *ecx, int *edx)
+void read_cpuid(loff_t address, int *eax, int *ebx, int *ecx, int *edx)
 {
 	uint32_t data[4];
 
 	if (pread(cpuid_fd, &data, 16, address) != 16) {
-		error_die("error reading %s", cpuid_device);
+		error_die(_("error reading %s"), cpuid_device);
 	}
 
 	if (eax) *eax = data[0];
@@ -185,19 +226,107 @@
 	/* test for "TransmetaCPU" */
 	read_cpuid(CPUID_TMx86_VENDOR_ID, &eax, &ebx, &ecx, &edx);
 	if (ebx != 0x6e617254 || ecx != 0x55504361 || edx != 0x74656d73) {
-		fprintf(stderr, "%s: not a Transmeta x86 CPU\n", progname);
+		fprintf(stderr, _("%s: not a Transmeta x86 CPU\n"), progname);
 		exit(1);
 	}
 
 	/* test for LongRun feature flag */
 	read_cpuid(CPUID_TMx86_PROCESSOR_INFO, &eax, &ebx, &ecx, &edx);
 	if (!CPUID_TMx86_FEATURE_LONGRUN(edx)) {
-		printf("LongRun: unsupported\n");
+		printf(_("LongRun: unsupported\n"));
 		exit(0);
 	}
 }
 
-void list_longrun()
+void print_lrti_info()
+{
+	int max;
+	int junk;
+	int max_voltage, max_mhz, max_power;
+
+	read_msr(MSR_TMx86_LRTI_READOUT, &junk, &max);
+
+	write_msr(MSR_TMx86_LRTI_READOUT, 0, max);
+	read_msr(MSR_TMx86_LRTI_VOLT_MHZ, &max_mhz, &max_voltage);
+
+	max_power = max_mhz * max_voltage * max_voltage;
+
+	printf(_("# %%   MHz  Volts  usage  SDR  DDR  PCI\n"));
+
+	int i;
+	for (i = max; i >= 0; i--)
+	{
+		int percent, mhz, voltage, power;
+		int ddr_mem_div, sdr_mem_div, ddr_freq, sdr_freq;
+		int io_div;
+		write_msr(MSR_TMx86_LRTI_READOUT, i, max);
+
+		read_msr(MSR_TMx86_LRTI_PERF, &percent, &junk);
+		printf(_("%3d "), percent);
+
+		read_msr(MSR_TMx86_LRTI_VOLT_MHZ, &mhz, &voltage);
+		printf(_("%5d %6.3f "), mhz, (voltage / 1000.0));
+
+                power = mhz * voltage * voltage;
+
+		printf(_("%6.3f "), ((float) power) / max_power);
+
+		// TODO:  Watch for zeros
+		read_msr(MSR_TMx86_LRTI_DIV_MEM, &sdr_mem_div, &ddr_mem_div);
+
+		sdr_freq = 0;
+		ddr_freq = 0;
+
+		if (sdr_mem_div > 0)
+		{
+			sdr_freq = mhz / sdr_mem_div;
+		}
+
+		if (ddr_mem_div > 0)
+		{
+			ddr_freq = mhz / ddr_mem_div;
+		}
+
+		printf(_("%4d %4d "), sdr_freq, ddr_freq);
+
+		// TODO:  Watch for zeros
+		read_msr(MSR_TMx86_LRTI_DIV_IO, &io_div, &junk);
+		printf(_("%4d\n"), mhz / io_div);
+
+                /*
+                // Most of the rest of these flags don't appear too interesting
+		int eax, ebx;
+		read_msr(MSR_TMx86_LRTI_GATE, &eax, &ebx);
+		printf(_("MSR_TMx86_LRTI_GATE: %d %d\n"), eax, ebx);
+
+		read_msr(MSR_TMx86_LRTI_SDR_MISC, &eax, &ebx);
+		printf(_("MSR_TMx86_LRTI_SDR_MISC: %x %x\n"), eax, ebx);
+
+		read_msr(MSR_TMx86_LRTI_SDR_TIF, &eax, &ebx);
+		printf(_("MSR_TMx86_LRTI_SDR_TIF: %d %d\n"), eax, ebx);
+
+		read_msr(MSR_TMx86_LRTI_SDR_MRS, &eax, &ebx);
+		printf(_("MSR_TMx86_LRTI_SDR_MRS: %d %d\n"), eax, ebx);
+
+		read_msr(MSR_TMx86_LRTI_SDR_LBT, &eax, &ebx);
+		printf(_("MSR_TMx86_LRTI_SDR_LBT: %d %d\n"), eax, ebx);
+
+		read_msr(MSR_TMx86_LRTI_DDR_MISC_TIF, &eax, &ebx);
+		printf(_("MSR_TMx86_LRTI_DDR_MISC_TIF: %x %x\n"), eax, ebx);
+
+		read_msr(MSR_TMx86_LRTI_DDR_MRS0, &eax, &ebx);
+		printf(_("MSR_TMx86_LRTI_DDR_MRS0: %d %d\n"), eax, ebx);
+
+		read_msr(MSR_TMx86_LRTI_DDR_MRS1_MRS2, &eax, &ebx);
+		printf(_("MSR_TMx86_LRTI_DDR_MRS1_MRS2: %d %d\n"), eax, ebx);
+
+		read_msr(MSR_TMx86_PFTI_MING, &eax, &ebx);
+		printf(_("MSR_TMx86_PFTI_MING: %d %d\n"), eax, ebx);
+                */
+	}
+}
+
+void old_list_longrun()
 {
 	int i, save_lower, save_upper, pct_in, pct_last, steps, freq_max;
 	int eax, ebx, ecx;
@@ -230,7 +359,7 @@
 			  LONGRUN_WRITE(save_upper, pct_in));
 		read_cpuid(CPUID_TMx86_LONGRUN_STATUS, &eax, &ebx, &ecx, 0);
 		if (opt_verbose)
-			printf("# set %d, got %d\n", pct_in, ecx);
+			printf(_("# set %d, got %d\n"), pct_in, ecx);
 		if (pct_last < ecx) {
 			perf[i] = ecx;
 			mhz[i] = eax;
@@ -246,12 +375,12 @@
 	/* find power_max */
 	power_max = mhz[i] * volts[i] * volts[i];
 
+	printf(_("# %%   MHz  Volts  usage\n"));
 	/* print results */
-	printf("# %%   MHz  Volts  usage\n");
 	for (i = 0; i <= steps; i++) {
 		if (mhz[i]) {
 			power_ratio = mhz[i] * volts[i] * volts[i] / power_max;
-			printf("%3d %5d %6.3f %6.3f\n",
+			printf(_("%3d %5d %6.3f %6.3f\n"),
 			       perf[i], mhz[i], volts[i] / 1000.0, power_ratio);
 		}
 	}
@@ -264,6 +393,21 @@
 	write_msr(MSR_TMx86_LONGRUN, save_lower, save_upper);
 }
 
+void list_longrun()
+{
+	int eax, ebx, ecx, edx;
+
+	read_cpuid(CPUID_TMx86_PROCESSOR_INFO, &eax, &ebx, &ecx, &edx);
+	if (CPUID_TMx86_FEATURE_LRTI(edx)) 
+	{
+		print_lrti_info();
+	}
+	else
+	{
+		old_list_longrun();
+	}
+}
+
 void get_longrun(int *low, int *high)
 {
 	read_msr(MSR_TMx86_LONGRUN, low, high);
@@ -280,7 +424,24 @@
 	write_msr(MSR_TMx86_LONGRUN, LONGRUN_WRITE(lower, low),
 		  LONGRUN_WRITE(upper, high));
 	if (opt_verbose) {
-		printf("Setting performance window: %d to %d\n", low, high);
+		printf(_("Setting performance window: %d to %d\n"), low, high);
+	}
+}
+
+void set_longrun_atm(int level)
+{
+	uint8_t flags = 0x00;
+	if (level != 8)
+	{
+		// LTX codes constitute bits 0-5, with the middle three bits
+		// indicating the TLX setting
+		flags = 0x11;
+		flags |= (level & 0x7)<<1;
+	}
+
+	write_atm(&flags);
+	if (opt_verbose) {
+		printf(_("Setting thermal extensions: %x\n"), flags);
 	}
 }
 
@@ -292,14 +453,14 @@
 	if (!strcmp(flag, "economy")) {
 		write_msr(MSR_TMx86_LONGRUN_FLAGS, lower & 0xfffffffe, upper);
 		if (opt_verbose) {
-			printf("Setting flag: economy\n");
+			printf(_("Setting flag: economy\n"));
 		}
 	}
 	else if (!strcmp(flag, "performance")) {
 		write_msr(MSR_TMx86_LONGRUN_FLAGS, (lower & 0xffffffff) | 0x1,
 			  upper);
 		if (opt_verbose) {
-			printf("Setting flag: performance\n");
+			printf(_("Setting flag: performance\n"));
 		}
 	}
 	else {
@@ -317,54 +478,60 @@
 
 	read_atm(&atm);
 
-	printf("LongRun: %s\n", LR_EN(atm) ? "enabled" : "disabled");
-	printf("LongRun Thermal Extensions (LTX): %s\n", ATM_EN(atm) ? "active" : "inactive");
+	printf(_("LongRun: %s\n"), LR_EN(atm) ? _("enabled") : _("disabled"));
+	printf(_("LongRun Thermal Extensions (LTX): %s\n"), ATM_EN(atm) ? _("active") : _("inactive"));
 	if (ATM_EN(atm)) {
-		printf("LTX setting: ");
+		printf(_("LTX setting: "));
 		switch(ATM_LVL(atm)) {
 		case 0:
 		case 1:
-			printf("reserved\n"); break;
+			printf(_("reserved\n")); break;
 		case 2:
-			printf("75%% reduction\n"); break;
+			printf(_("75%% reduction\n")); break;
 		case 3:
-			printf("62.5%% reduction\n"); break;
+			printf(_("62.5%% reduction\n")); break;
 		case 4:
-			printf("50%% reduction\n"); break;
+			printf(_("50%% reduction\n")); break;
 		case 5:
-			printf("37.5%% reduction\n"); break;
+			printf(_("37.5%% reduction\n")); break;
 		case 6:
-			printf("25%% reduction\n"); break;
+			printf(_("25%% reduction\n")); break;
 		case 7:
-			printf("12.5%% reduction\n"); break;
+			printf(_("12.5%% reduction\n")); break;
 		}
 	}
 	get_longrun(&lower, &upper);
-	printf("Current performance window: %d to %d\n", lower, upper);
-	printf("Current performance level: %d\n", percent);
+	printf(_("Current performance window: %d to %d\n"), lower, upper);
+	printf(_("Current performance level: %d\n"), percent);
 	read_msr(MSR_TMx86_LONGRUN_FLAGS, &lower, &upper);
-	printf("LongRun flags: %s\n", (lower & 1) ? "performance" : "economy");
+	printf(_("LongRun flags: %s\n"), (lower & 1) ? _("performance") : _("economy"));
 }
 
 int main(int argc, char *argv[])
 {
 	int low, high;
+	int atm;
 	int g;
 	char *opt_flag = NULL;
 	int opt_list = 0;
 	int opt_print = 0;
 	int opt_set = 0;
+	int opt_atm = 0;
 
 	if (argc)
 		progname = my_basename(argv[0]);
 	else
 		progname = "longrun";
 
+	setlocale (LC_ALL, "");
+	bindtextdomain (progname, LOCALEDIR);
+	textdomain (progname);
+
 	msr_device = MSR_DEVICE;
 	cpuid_device = CPUID_DEVICE;
 
 	/* command line options */
-	while ((g = getopt(argc, argv, "c:f:m:hlpsv")) != EOF) {
+	while ((g = getopt(argc, argv, "c:f:m:hlpstv")) != EOF) {
 		switch (g) {
 		case 'c':
 			cpuid_device = optarg;
@@ -387,35 +554,43 @@
 		case 's':
 			opt_set = 1;
 			break;
+		case 't':
+			opt_atm = 1;
+			break;
 		case 'v':
 			opt_verbose++;
 			break;
 		}
 	}
 
-	if (opt_list + opt_print + opt_set + (opt_flag ? 1 : 0) != 1)
+	/* Modified for Debian to allow concurrent use of the -s and -f
+	 * switches -- JEH */
+	if (opt_list + opt_print + opt_atm + (opt_set || (opt_flag ? 1 : 0)) != 1)
 		usage(1);
 
 	if (opt_set && (optind + 2 != argc))
 		usage(1);
 
+	if (opt_atm && (optind + 1 != argc))
+		usage(1);
+
 	if (geteuid()) {
-		fprintf(stderr, "%s: must be run as root\n", progname);
+		fprintf(stderr, _("%s: must be run as root\n"), progname);
 		exit(1);
 	}
 
 	if ((cpuid_fd = open(cpuid_device, O_RDWR)) < 0) {
-		error_warn("error opening %s", cpuid_device);
+		error_warn(_("error opening %s"), cpuid_device);
 		if (errno == ENODEV) {
-			fprintf(stderr, "make sure your kernel was compiled with CONFIG_X86_CPUID=y\n");
+			fprintf(stderr, _("make sure your kernel was compiled with CONFIG_X86_CPUID=y\n"));
 		}
 		exit(1);
 	}
 
 	if ((msr_fd = open(msr_device, O_RDWR)) < 0) {
-		error_warn("error opening %s", msr_device);
+		error_warn(_("error opening %s"), msr_device);
 		if (errno == ENODEV) {
-			fprintf(stderr, "make sure your kernel was compiled with CONFIG_X86_MSR=y\n");
+			fprintf(stderr, _("make sure your kernel was compiled with CONFIG_X86_MSR=y\n"));
 		}
 		exit(1);
 	}
@@ -431,6 +606,10 @@
 		high = strtol(argv[optind + 1], NULL, 10);
 		set_longrun(low, high);
 	}
+	if (opt_atm) {
+		atm = strtol(argv[optind], NULL, 10);
+		set_longrun_atm(atm);
+	}
 	if (opt_flag) {
 		set_longrun_flag(opt_flag);
 	}
--- longrun-0.9.orig/debian/compat
+++ longrun-0.9/debian/compat
@@ -0,0 +1 @@
+4
--- longrun-0.9.orig/debian/control
+++ longrun-0.9/debian/control
@@ -0,0 +1,17 @@
+Source: longrun
+Section: utils
+Priority: extra
+Maintainer: Joey Hess <[e-mail]>
+Build-Depends: debhelper (>> 4), groff, bsdmainutils, gettext
+Standards-Version: 3.6.1.0
+
+Package: longrun
+Architecture: i386
+Depends: ${shlibs:Depends}
+Description: Transmeta Crusoe LongRun control utility
+ The longrun utility is used to query and control the LongRun settings of
+ Transmeta Crusoe processors. It can set the performance level, and set the
+ CPU speed window.
+ .
+ This utility only works on with the Transmeta Crusoe CPU, and
+ requires the Linux CPUID and MSR device drivers.
--- longrun-0.9.orig/debian/changelog
+++ longrun-0.9/debian/changelog
@@ -0,0 +1,98 @@
+longrun (0.9-14) unstable; urgency=low
+
+  * Patch from Jason Marshall to make the -l flag use the LRTI information if
+    available, which avoids needing to adjust processor speed to get the info,
+    and lets it print bus speed information too.
+
+ -- Joey Hess <[e-mail]>  Sun, 13 Jun 2004 15:16:13 -0400
+
+longrun (0.9-13) unstable; urgency=low
+
+  * Patch from Jason Marshall to add a -t flax to allow control of the
+    Longrun Thermal Extensions.
+
+ -- Joey Hess <[e-mail]>  Fri,  9 Apr 2004 13:00:13 -0400
+
+longrun (0.9-12) unstable; urgency=low
+
+  * Fix a typo in the postinst that broke upgrade. 
+
+ -- Joey Hess <[e-mail]>  Sun, 14 Dec 2003 16:02:34 -0500
+
+longrun (0.9-11) unstable; urgency=low
+
+  * Allow concurrent use of the -s and -f switches. Closes: #206153
+
+ -- Joey Hess <[e-mail]>  Sun, 30 Nov 2003 13:39:02 -0500
+
+longrun (0.9-10) unstable; urgency=low
+
+  * Fix url in copyright file.
+  * Added a watch file.
+  * Fix logic error in postinst.
+
+ -- Joey Hess <[e-mail]>  Sat, 13 Sep 2003 22:53:41 -0400
+
+longrun (0.9-9) unstable; urgency=low
+
+  * New maintainer. Closes: #173887
+  * Remove the README from the deb as it is just a copy of the man page.
+  * Updated to my current best practices.
+  * Applied a patch from Jean-Philippe Guérard to add an
+    /etc/apm/event.d/longrun and a /etc/default/longrun to control it.
+    These let longrun react to APM events like low power and on/off ac power,
+    but are disabled and do nothing by default.
+
+ -- Joey Hess <[e-mail]>  Mon, 18 Aug 2003 20:50:40 -0400
+
+longrun (0.9-8) unstable; urgency=low
+
+  * orphaning, #173887
+
+ -- ISHIKAWA Mutsumi <[e-mail]>  Sat,  2 Aug 2003 16:14:41 +0900
+
+longrun (0.9-7) unstable; urgency=low
+
+  * fix pread(),pwrite() offset problem, closes: #165781
+
+ -- ISHIKAWA Mutsumi <[e-mail]>  Wed, 23 Oct 2002 02:24:54 +0900
+
+longrun (0.9-6) unstable; urgency=low
+
+  * add Build-Depends: gettext, closes: #133708
+  * cleanup postinst and debian/rules (lintian clean)
+
+ -- ISHIKAWA Mutsumi <[e-mail]>  Fri, 15 Feb 2002 21:28:48 +0900
+
+longrun (0.9-5) unstable; urgency=low
+
+  * add Build-Depends: bsdmainutils, closes: #123711 
+
+ -- ISHIKAWA Mutsumi <[e-mail]>  Thu, 13 Dec 2001 09:07:31 +0900
+
+longrun (0.9-4) unstable; urgency=low
+
+  * remove invalid file /usr/share/man/man1/longrun.1.ja.gz,
+    closes: #92216
+
+ -- ISHIKAWA Mutsumi <[e-mail]>  Sat, 31 Mar 2001 02:23:08 +0900
+
+longrun (0.9-3) unstable; urgency=low
+
+  * gettextize and add japanese message file (patch is already sent to
+    upstream auther of cause :-)
+
+ -- ISHIKAWA Mutsumi <[e-mail]>  Wed, 28 Feb 2001 00:53:43 +0900
+
+longrun (0.9-2) unstable; urgency=low
+
+  * add Japanese man page (already sent to upsream auther)
+  * rewrite description, closes: #87130
+
+ -- ISHIKAWA Mutsumi <[e-mail]>  Sat, 24 Feb 2001 02:59:45 +0900
+
+longrun (0.9-1) unstable; urgency=low
+
+  * Initial Release.
+
+ -- ISHIKAWA Mutsumi <[e-mail]>  Thu, 15 Feb 2001 01:43:45 +0900
--- longrun-0.9.orig/debian/rules
+++ longrun-0.9/debian/rules
@@ -0,0 +1,45 @@
+#!/usr/bin/make -f
+
+build: build-stamp
+build-stamp:
+	dh_testdir
+	$(MAKE)
+	touch build-stamp
+
+clean:
+	dh_testdir
+	dh_testroot
+	rm -f build-stamp
+	-$(MAKE) clean
+	dh_clean
+
+install: build
+	dh_testdir
+	dh_testroot
+	dh_clean -k
+	dh_installdirs
+	$(MAKE) install DESTDIR=$(CURDIR)/debian/longrun
+
+binary-indep: build install
+
+binary-arch: build install
+	dh_testdir
+	dh_testroot
+	dh_installdocs
+	dh_installman
+	dh_installchangelogs 
+	dh_installinit
+	dh_installdirs etc/apm/event.d
+	install debian/event.d debian/longrun/etc/apm/event.d/longrun
+	dh_link
+	dh_strip
+	dh_compress
+	dh_fixperms
+	dh_installdeb
+	dh_shlibdeps
+	dh_gencontrol
+	dh_md5sums
+	dh_builddeb
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install configure
--- longrun-0.9.orig/debian/postinst
+++ longrun-0.9/debian/postinst
@@ -0,0 +1,12 @@
+#!/bin/sh
+set -e
+
+if [ "$1" = configure ]; then
+	if [ ! -e /dev/cpu/0/msr ] || [ ! -e /dev/cpu/0/cpuid ] ; then
+		if [ -x /dev/MAKEDEV ]; then
+			cd /dev && ./MAKEDEV cpu
+		fi
+	fi
+fi
+	
+#DEBHELPER#
--- longrun-0.9.orig/debian/README.Debian
+++ longrun-0.9/debian/README.Debian
@@ -0,0 +1,9 @@
+The longrun utility requires the Linux CPUID and MSR devices be compiled into
+the kernel the msr and cpuid modules must be loaded. You should use kernel
+2.4.0 or later.
+
+This package includes integration with the apm daemon. To make your laptop
+enter low power mode when unplugged from AC power, or when the battery is
+low, edit /etc/default/longrun. This is disabled by default.
+
+ -- Joey Hess <[e-mail]>
--- longrun-0.9.orig/debian/copyright
+++ longrun-0.9/debian/copyright
@@ -0,0 +1,21 @@
+This package was debianized by ISHIKAWA Mutsumi <[e-mail]>
+and is now maintained by Joey Hess <[e-mail]>
+
+It was downloaded from ftp://ftp.kernel.org/pub/linux/utils/cpu/crusoe/longrun-0.9.tar.bz2
+
+ * longrun - Transmeta(TM) Crusoe(TM) LongRun(TM) utility
+ *
+ * Copyright (C) 2001  Transmeta Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+On Debian GNU/Linux systems, the complete text of the GNU General
+Public License can be found in `/usr/share/common-licenses/GPL'.
--- longrun-0.9.orig/debian/default
+++ longrun-0.9/debian/default
@@ -0,0 +1,46 @@
+# Configuration file for /etc/apm/event.d/longrun
+#
+# This sets up longrun handling of APM events.
+
+# If this variable is set to 1, APM events will trigger a change in
+# longrun settings.
+
+#LONGRUN_ENABLE="1"
+
+# Performance mode
+#
+# Used to set the longrun performance window when running on
+# AC power.
+#
+# Use "longrun -l" to check the available performance levels
+
+PERFORMANCE="0 100"
+
+# Economy mode
+#
+# Used to set the longrun performance window when running on
+# battery.
+#
+# Use "longrun -l" to check the available performance levels
+
+ECONOMY="0 70"
+
+# Low battery mode
+#
+# Used to set the longrun performance window when the system
+# battery is running out.
+#
+# Use "longrun -l" to check the available performance levels
+
+LOW_BATTERY="0 0"
+
+# Under which battery charge do we consider the battery charge
+# being low (you also need to update /etc/default/apmd).
+
+#BATTERY_THRESHOLD="10"
+
+# Debug mode
+#
+# If you set DEBUG to "1", longrun change will be logged to syslog.
+
+#DEBUG="1"
--- longrun-0.9.orig/debian/event.d
+++ longrun-0.9/debian/event.d
@@ -0,0 +1,99 @@
+#!/bin/sh
+
+# Longrun setup in response to apm events
+#
+# Do not make changes to this file, use /etc/default/longrun to tune
+# this script
+
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+
+LONGRUN_BIN=/usr/bin/longrun
+DEFAULTS=/etc/default/longrun
+
+# Default values - overiden by /etc/default/longrun
+
+LONGRUN_ENABLE="0"
+PERFORMANCE="0 100"
+ECONOMY="0 30"
+LOW_BATTERY="0 0"
+BATTERY_THRESHOLD="10"
+DEBUG="0"
+
+# longrun settings update function
+
+set_longrun () {
+[ "$DEBUG" -eq 1 ] && logger -t longrun "$1; perf. window: $2; flag: $3"
+"$LONGRUN_BIN" -s $2
+"$LONGRUN_BIN" -f $3
+}
+
+# Is APM available
+
+apm_available || exit 0
+
+# Source the default values
+
+if [ -e "$DEFAULTS" ]; then
+    . "$DEFAULTS"
+fi
+
+# Should we go on?
+
+[ "$LONGRUN_ENABLE" = "1" ] || exit 0
+
+# Check the APM kernel driver version, to see if we
+# understand the content of /proc/apm. Then, get the
+# remaining battery charge from /proc/apm.
+
+# See /usr/src/linux/arch/i386/kernel/apm.c
+
+APM_VERSION=`cat /proc/apm | cut -d " " -f 1`
+
+if [ "$APM_VERSION" = "1.16" ] ; then
+    REMAINING_POWER=`cat /proc/apm | cut -d " " -f 7 | tr -d "%"`
+else
+    REMAINING_POWER=-1
+fi
+
+# Is longrun available
+
+[ -x "$LONGRUN_BIN" ] || exit 0
+
+# Act depending on the APM event
+
+case "$1,$2" in
+
+    change,power|resume,*|start,*)
+        if `on_ac_power` ; then
+
+            set_longrun "on ac" "$PERFORMANCE" "performance"
+
+        elif [ "$REMAINING_POWER" -eq -1 -o \
+               "$REMAINING_POWER" -gt "$BATTERY_THRESHOLD" ] ; then
+
+            set_longrun "on battery" "$ECONOMY" "economy"
+
+        else
+
+            set_longrun "on battery" "$LOW_BATTERY" "economy"
+
+        fi
+        ;;
+
+    change,battery)
+        if `on_ac_power` ; then
+
+            set_longrun "on ac" "$PERFORMANCE" "performance"
+
+        elif [ "$REMAINING_POWER" -gt "$BATTERY_THRESHOLD" ] ; then
+
+            set_longrun "on battery" "$ECONOMY" "economy"
+
+        else
+
+            set_longrun "on battery" "$LOW_BATTERY" "economy"
+
+        fi
+        ;;
+
+esac
--- longrun-0.9.orig/debian/watch
+++ longrun-0.9/debian/watch
@@ -0,0 +1,2 @@
+version=2
+ftp://ftp.kernel.org/pub/linux/utils/cpu/crusoe/longrun-(.*).tar.gz
--- longrun-0.9.orig/po/Makefile
+++ longrun-0.9/po/Makefile
@@ -0,0 +1,46 @@
+include ../Makeconfig
+
+POFILES=ja.po
+GMOFILES=ja.gmo
+
+POTFILES=../longrun.c
+
+CATOBJEXT = .gmo
+INSTOBJEXT = .mo
+
+.SUFFIXES: .c .o .po .pox .gmo .mo
+
+all: $(GMOFILES)
+
+longrun.pot: ../longrun.c
+	xgettext -a -d longrun -k_ -o longrun.pot -s ../longrun.c
+
+.po.pox:
+	make longrun.pot
+	msgmerge $< longrun.pot -o $*.pox
+
+.po.mo:
+	msgfmt -o $@ $<
+
+.po.gmo:
+	file=`echo $* | sed 's,.*/,,'`.gmo \
+	  && rm -f $$file && msgfmt -o $$file $<
+
+install:
+	mkdir -p $(DESTDIR)$(LOCALEDIR)
+
+	@catalogs='$(GMOFILES)'; \
+	localedir='$(DESTDIR)$(LOCALEDIR)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
+	  dir=$$localedir/$$lang/LC_MESSAGES; \
+	  mkdir -p $$dir; \
+	  if test -r $$cat; then \
+	    install -m 644 $$cat $$dir/$(PACKAGE)$(INSTOBJEXT) || exit 1; \
+	    echo "installing $$cat as $$dir/$(PACKAGE)$(INSTOBJEXT)"; \
+	  fi \
+	done
+
+clean:
+	rm -f *.mo *.gmo
--- longrun-0.9.orig/po/ja.po
+++ longrun-0.9/po/ja.po
@@ -0,0 +1,203 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR Free Software Foundation, Inc.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#: longrun.c:366
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: longrun 0.9.1\n"
+"POT-Creation-Date: 2001-02-22 17:09+0900\n"
+"PO-Revision-Date: 2001-02-22 17:09+0900\n"
+"Last-Translator: ISHIKAWA Mutsumi <[e-mail]>\n"
+"Language-Team: ISHIKAWA Mutsumi <[e-mail]>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=EUC-JP\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: longrun.c:76
+#, c-format
+msgid ""
+"%s %s (%s)\n"
+"usage: %s [-c device] [-m device] [-hlpv] [-f flag] [-s low high]\n"
+" -c device     set CPUID device\n"
+" -m device     set MSR device\n"
+" -h            print this help\n"
+" -l            list LongRun information about available performance levels\n"
+" -p            print current LongRun settings and status\n"
+" -v            be more verbose\n"
+" -f [flag]     set a LongRun mode flag\n"
+" -s low high   set current LongRun performance window (0 to 100)\n"
+"\n"
+"supported flags:\n"
+" economy       set economy mode (turn off performance mode)\n"
+" performance   set performance mode (turn off economy mode)\n"
+msgstr ""
+"%s %s (%s)\n"
+"»ÈÍÑË¡: %s [-c ¥Ç¥Ð¥¤¥¹] [-m ¥Ç¥Ð¥¤¥¹] [-hlpv] [-f ¥Õ¥é¥°] [-s ²¼¸Â ¾å¸Â]\n"
+" -c ¥Ç¥Ð¥¤¥¹   CPUID ¥Ç¥Ð¥¤¥¹¤òÀßÄê\n"
+" -m ¥Ç¥Ð¥¤¥¹   MSR ¥Ç¥Ð¥¤¥¹¤òÀßÄê\n"
+" -h            ¤³¤Î¥Ø¥ë¥×¤òɽ¼¨\n"
+" -l            ¼Â¸½²Äǽ¤Ê¥Ñ¥Õ¥©¡¼¥Þ¥ó¥¹¥ì¥Ù¥ë¤Ë´Ø¤¹¤ë LongRun ¾ðÊó¤òɽ¼¨\n"
+" -p            ¸½ºß¤Î LongRun ¤ÎÀßÄê¤È¾õ¶·¤òɽ¼¨\n"
+" -v            ¤è¤ê¿¤¯¤Î¾ðÊó¤òɽ¼¨(verbose ¥â¡¼¥É)\n"
+" -f [¥Õ¥é¥°]   LongRun ¥â¡¼¥É¥Õ¥é¥°¤òÀßÄê\n"
+" -s ²¼¸Â ¾å¸Â  ¸½ºß¤Î LongRun ¥Ñ¥Õ¥©¡¼¥Þ¥ó¥¹¥¦¥£¥ó¥É¤òÀßÄê (0 ¤«¤é 100)\n"
+"\n"
+"¥µ¥Ý¡¼¥È¤µ¤ì¤Æ¤¤¤ë¥Õ¥é¥°¤Ï:\n"
+" economy       ¥¨¥³¥Î¥ß¡¼¥â¡¼¥É¤ËÀßÄê(¥Ñ¥Õ¥©¡¼¥Þ¥ó¥¹¥â¡¼¥É¤ò¥ª¥Õ¤Ë¤¹¤ë)\n"
+" performance   ¥Ñ¥Õ¥©¡¼¥Þ¥ó¥¹¥â¡¼¥É¤ËÀßÄê(¥¨¥³¥Î¥ß¡¼¥â¡¼¥É¤ò¥ª¥Õ¤Ë¤¹¤ë)\n"
+
+
+#: longrun.c:132 longrun.c:415 longrun.c:423
+#, c-format
+msgid "error opening %s"
+msgstr "Áàºî¥¨¥é¡¼ %s"
+
+#: longrun.c:134
+msgid "make sure /proc is mounted\n"
+msgstr "/proc ¤¬¥Þ¥¦¥ó¥È¤µ¤ì¤Æ¤¤¤ë¤«³Îǧ¤·¤Æ¤¯¤À¤µ¤¤\n"
+
+#: longrun.c:139 longrun.c:150 longrun.c:175
+#, c-format
+msgid "error reading %s"
+msgstr "Æɤ߹þ¤ß¥¨¥é¡¼ %s"
+
+#: longrun.c:165
+#, c-format
+msgid "error writing %s"
+msgstr "½ñ¤­¹þ¤ß¥¨¥é¡¼ %s"
+
+#: longrun.c:191
+#, c-format
+msgid "%s: not a Transmeta x86 CPU\n"
+msgstr "%s: ¤³¤Î¥Þ¥·¥ó¤Î CPU ¤Ï Transmeta x86 CPU ¤Ç¤Ï¤¢¤ê¤Þ¤»¤ó\n"
+
+#: longrun.c:198
+msgid "LongRun: unsupported\n"
+msgstr "LongRun ¤¬¥µ¥Ý¡¼¥È¤µ¤ì¤Æ¤¤¤Þ¤»¤ó\n"
+
+#: longrun.c:236
+#, c-format
+msgid "# set %d, got %d\n"
+msgstr ""
+
+#: longrun.c:253
+msgid "# %%   MHz  Volts  usage\n"
+msgstr "# %%   MHz   ÅÅ°µ  »ÈÍÑΨ\n"
+
+#: longrun.c:257
+#, c-format
+msgid "%3d %5d %6.3f %6.3f\n"
+msgstr "%3d %5d %6.3f  %6.3f\n"
+
+#: longrun.c:286
+#, c-format
+msgid "Setting performance window: %d to %d\n"
+msgstr "¥Ñ¥Õ¥©¡¼¥Þ¥ó¥¹¥¦¥¤¥ó¥É¤ò %d ¤«¤é %d ¤ËÀßÄꤷ¤Þ¤¹\n"
+
+#: longrun.c:295 longrun.c:349
+msgid "economy"
+msgstr "¥¨¥³¥Î¥ß¡¼"
+
+#: longrun.c:298
+msgid "Setting flag: economy\n"
+msgstr "¥Õ¥é¥°¤ò¥¨¥³¥Î¥ß¡¼¤ËÀßÄꤷ¤Þ¤¹\n"
+
+#: longrun.c:301 longrun.c:349
+msgid "performance"
+msgstr "¥Ñ¥Õ¥©¡¼¥Þ¥ó¥¹"
+
+#: longrun.c:305
+msgid "Setting flag: performance\n"
+msgstr "¥Õ¥é¥°¤ò¥Ñ¥Õ¥©¡¼¥Þ¥ó¥¹¤ËÀßÄꤷ¤Þ¤¹\n"
+
+#: longrun.c:323
+#, c-format
+msgid "LongRun: %s\n"
+msgstr ""
+
+#: longrun.c:323
+msgid "enabled"
+msgstr "Í­¸ú"
+
+#: longrun.c:323
+msgid "disabled"
+msgstr "̵¸ú"
+
+#: longrun.c:324
+#, c-format
+msgid "LongRun Thermal Extensions (LTX): %s\n"
+msgstr "LongRun ȯǮÄ㸺³ÈÄ¥ (LTX): %s\n"
+
+#: longrun.c:324
+msgid "active"
+msgstr "³èÀ­"
+
+#: longrun.c:324
+msgid "inactive"
+msgstr "Èó³èÀ­"
+
+#: longrun.c:326
+msgid "LTX setting: "
+msgstr "LTX ¤ÎÀßÄê: "
+
+#: longrun.c:330
+msgid "reserved\n"
+msgstr "ͽÌó\n"
+
+#: longrun.c:332
+msgid "75%% reduction\n"
+msgstr "75%% Ä㸺\n"
+
+#: longrun.c:334
+msgid "62.5%% reduction\n"
+msgstr "62.5%% Ä㸺\n"
+
+#: longrun.c:336
+msgid "50%% reduction\n"
+msgstr "50%% Ä㸺\n"
+
+#: longrun.c:338
+msgid "37.5%% reduction\n"
+msgstr "37.5%% Ä㸺\n"
+
+#: longrun.c:340
+msgid "25%% reduction\n"
+msgstr "25%% Ä㸺\n"
+
+#: longrun.c:342
+msgid "12.5%% reduction\n"
+msgstr "12.5%% Ä㸺\n"
+
+#: longrun.c:346
+#, c-format
+msgid "Current performance window: %d to %d\n"
+msgstr "¸½ºß¤Î¥Ñ¥Õ¥©¡¼¥Þ¥ó¥¹ ¥¦¥¤¥ó¥É: %d ¤«¤é %d\n"
+
+#: longrun.c:347
+#, c-format
+msgid "Current performance level: %d\n"
+msgstr "¸½ºß¤Î¥Ñ¥Õ¥©¡¼¥Þ¥ó¥¹¥ì¥Ù¥ë: %d\n"
+
+#: longrun.c:349
+#, c-format
+msgid "LongRun flags: %s\n"
+msgstr "LongRun ¥Õ¥é¥°: %s\n"
+
+#: longrun.c:410
+#, c-format
+msgid "%s: must be run as root\n"
+msgstr "%s: root ¸¢¸Â¤Ç¼Â¹Ô¤·¤Ê¤±¤ì¤Ð¤Ê¤ê¤Þ¤»¤ó\n"
+
+#: longrun.c:417
+msgid "make sure your kernel was compiled with CONFIG_X86_CPUID=y\n"
+msgstr ""
+"CONFIG_X86_CPUID=y ¤òÀßÄꤷ¤Æ ¥«¡¼¥Í¥ë¤¬¥³¥ó¥Ñ¥¤¥ë¤µ¤ì¤Æ¤¤¤ë¤«"
+"³Îǧ¤·¤Æ¤¯¤À¤µ¤¤\n"
+
+#: longrun.c:425
+msgid "make sure your kernel was compiled with CONFIG_X86_MSR=y\n"
+msgstr ""
+"CONFIG_X86_MSR=y ¤òÀßÄꤷ¤Æ¥«¡¼¥Í¥ë¤¬¥³¥ó¥Ñ¥¤¥ë¤µ¤ì¤Æ¤¤¤ë¤«"
+"³Îǧ¤·¤Æ¤¯¤À¤µ¤¤\n"
--- longrun-0.9.orig/po/longrun.pot
+++ longrun-0.9/po/longrun.pot
@@ -0,0 +1,202 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR Free Software Foundation, Inc.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#: ../longrun.c:366
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"POT-Creation-Date: 2001-02-27 21:41+0900\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <[e-mail]>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: ENCODING\n"
+
+#: ../longrun.c:253
+msgid "# %%   MHz  Volts  usage\n"
+msgstr ""
+
+#: ../longrun.c:236
+#, c-format
+msgid "# set %d, got %d\n"
+msgstr ""
+
+#: ../longrun.c:257
+#, c-format
+msgid "%3d %5d %6.3f %6.3f\n"
+msgstr ""
+
+#: ../longrun.c:76
+#, c-format
+msgid ""
+"%s %s (%s)\n"
+"usage: %s [-c device] [-m device] [-hlpv] [-f flag] [-s low high]\n"
+" -c device     set CPUID device\n"
+" -m device     set MSR device\n"
+" -h            print this help\n"
+" -l            list LongRun information about available performance levels\n"
+" -p            print current LongRun settings and status\n"
+" -v            be more verbose\n"
+" -f [flag]     set a LongRun mode flag\n"
+" -s low high   set current LongRun performance window (0 to 100)\n"
+"\n"
+"supported flags:\n"
+" economy       set economy mode (turn off performance mode)\n"
+" performance   set performance mode (turn off economy mode)\n"
+msgstr ""
+
+#: ../longrun.c:107 ../longrun.c:118
+#, c-format
+msgid "%s: "
+msgstr ""
+
+#: ../longrun.c:410
+#, c-format
+msgid "%s: must be run as root\n"
+msgstr ""
+
+#: ../longrun.c:191
+#, c-format
+msgid "%s: not a Transmeta x86 CPU\n"
+msgstr ""
+
+#: ../longrun.c:342
+msgid "12.5%% reduction\n"
+msgstr ""
+
+#: ../longrun.c:340
+msgid "25%% reduction\n"
+msgstr ""
+
+#: ../longrun.c:338
+msgid "37.5%% reduction\n"
+msgstr ""
+
+#: ../longrun.c:336
+msgid "50%% reduction\n"
+msgstr ""
+
+#: ../longrun.c:334
+msgid "62.5%% reduction\n"
+msgstr ""
+
+#: ../longrun.c:332
+msgid "75%% reduction\n"
+msgstr ""
+
+#: ../longrun.c:109 ../longrun.c:120
+#, c-format
+msgid ": %s\n"
+msgstr ""
+
+#: ../longrun.c:347
+#, c-format
+msgid "Current performance level: %d\n"
+msgstr ""
+
+#: ../longrun.c:346
+#, c-format
+msgid "Current performance window: %d to %d\n"
+msgstr ""
+
+#: ../longrun.c:326
+msgid "LTX setting: "
+msgstr ""
+
+#: ../longrun.c:324
+#, c-format
+msgid "LongRun Thermal Extensions (LTX): %s\n"
+msgstr ""
+
+#: ../longrun.c:349
+#, c-format
+msgid "LongRun flags: %s\n"
+msgstr ""
+
+#: ../longrun.c:323
+#, c-format
+msgid "LongRun: %s\n"
+msgstr ""
+
+#: ../longrun.c:198
+msgid "LongRun: unsupported\n"
+msgstr ""
+
+#: ../longrun.c:298
+msgid "Setting flag: economy\n"
+msgstr ""
+
+#: ../longrun.c:305
+msgid "Setting flag: performance\n"
+msgstr ""
+
+#: ../longrun.c:286
+#, c-format
+msgid "Setting performance window: %d to %d\n"
+msgstr ""
+
+#: ../longrun.c:324
+msgid "active"
+msgstr ""
+
+#: ../longrun.c:374
+msgid "c:f:m:hlpsv"
+msgstr ""
+
+#: ../longrun.c:323
+msgid "disabled"
+msgstr ""
+
+#: ../longrun.c:295 ../longrun.c:349
+msgid "economy"
+msgstr ""
+
+#: ../longrun.c:323
+msgid "enabled"
+msgstr ""
+
+#: ../longrun.c:132 ../longrun.c:415 ../longrun.c:423
+#, c-format
+msgid "error opening %s"
+msgstr ""
+
+#: ../longrun.c:139 ../longrun.c:150 ../longrun.c:175
+#, c-format
+msgid "error reading %s"
+msgstr ""
+
+#: ../longrun.c:165
+#, c-format
+msgid "error writing %s"
+msgstr ""
+
+#: ../longrun.c:324
+msgid "inactive"
+msgstr ""
+
+#: ../longrun.c:364
+msgid "longrun"
+msgstr ""
+
+#: ../longrun.c:134
+msgid "make sure /proc is mounted\n"
+msgstr ""
+
+#: ../longrun.c:417
+msgid "make sure your kernel was compiled with CONFIG_X86_CPUID=y\n"
+msgstr ""
+
+#: ../longrun.c:425
+msgid "make sure your kernel was compiled with CONFIG_X86_MSR=y\n"
+msgstr ""
+
+#: ../longrun.c:301 ../longrun.c:349
+msgid "performance"
+msgstr ""
+
+#: ../longrun.c:330
+msgid "reserved\n"
+msgstr ""
--- longrun-0.9.orig/longrun.1.ja
+++ longrun-0.9/longrun.1.ja
@@ -0,0 +1,188 @@
+.\" Copyright (C) 2001 Transmeta Corporation.  All rights reserved.
+.\"
+.\" The information contained in this document is provided solely for use in
+.\" connection with Transmeta products, and Transmeta reserves all rights in
+.\" and to such information and the products discussed herein.  This document
+.\" should not be construed as transferring or granting a license to any
+.\" intellectual property rights, whether express, implied, arising through
+.\" estoppel or otherwise.  Except as may be agreed in writing by Transmeta,
+.\" all Transmeta products are provided "as is" and without a warranty of any
+.\" kind, and Transmeta hereby disclaims all warranties, express or implied,
+.\" relating to Transmeta's products, including, but not limited to, the
+.\" implied warranties of merchantability, fitness for a particular purpose and
+.\" non-infringement of third party intellectual property.  Transmeta products
+.\" may contain design defects or errors which may cause the products to
+.\" deviate from published specifications, and Transmeta documents may contain
+.\" inaccurate information.  Transmeta makes no representations or warranties
+.\" with respect to the accuracy or completeness of the information contained
+.\" in this document, and Transmeta reserves the right to change product
+.\" descriptions and product specifications at any time, without notice.
+.\"
+.\" Transmeta products have not been designed, tested, or manufactured for use
+.\" in any application where failure, malfunction, or inaccuracy carries a risk
+.\" of death, bodily injury, or damage to tangible property, including, but not
+.\" limited to, use in factory control systems, medical devices or facilities,
+.\" nuclear facilities, aircraft, watercraft or automobile navigation or
+.\" communication, emergency systems, or other applications with a similar
+.\" degree of potential hazard.
+.\"
+.\" Transmeta reserves the right to discontinue any product or product document
+.\" at any time without notice, or to change any feature or function of any
+.\" Transmeta product or product document at any time without notice.
+.\"
+.\" Trademarks: Transmeta, the Transmeta logo, Crusoe, the Crusoe logo, Code
+.\" Morphing, LongRun and combinations thereof are trademarks of Transmeta
+.\" Corporation in the USA and other countries.  Other product names and brands
+.\" used in this document are for identification purposes only, and are the
+.\" property of their respective owners.
+.\"
+.\" Japanese Translated by ISHIKAWA Mutsumi <[e-mail]>
+.\" Last Modified at Sun Feb 25 17:38:20 JST 2001
+.\"
+.\".TH LONGRUN 1 "February 14, 2001"
+.TH LONGRUN 1 "2001 ǯ 2 ·î 14Æü"
+.nh
+.\" .SH NAME
+.SH ̾Á°
+.\" Transmeta(TM) Crusoe(TM) LongRun(TM) utility
+Transmeta(TM) Crusoe(TM) LongRun(TM) ¥æ¡¼¥Æ¥£¥ê¥Æ¥£
+.\".SH SYNOPSIS
+.\" .B longrun [-c device] [-m device] [-hlpv] [-f flag] [-s low high]
+.SH ½ñ¼°
+.B longrun [-c ¥Ç¥Ð¥¤¥¹] [-m ¥Ç¥Ð¥¤¥¹] [-hlpv] [-f ¥Õ¥é¥°] [-s ²¼¸Â ¾å¸Â]
+.\" .SH DESCRIPTION
+.SH ÀâÌÀ
+.\" The
+.\" .I longrun
+.\" utility is used to control and query LongRun settings on Transmeta
+.\" Crusoe processors.
+.I longrun
+¥æ¡¼¥Æ¥£¥ê¥Æ¥£¤Ï Transmeta Crusoe ¥×¥í¥»¥Ã¥µ¤Î LongRun ¤ÎÀßÄê¤Î¥³¥ó¥È¥í¡¼¥ë¤È
+Ì䤤¹ç¤ï¤»¤ËÍøÍѤµ¤ì¤ë¡£
+.TP
+.\" -c device
+.\" Set the CPUID device.  The default CPUID device is
+.\" .BR /dev/cpu/0/cpuid .
+-c ¥Ç¥Ð¥¤¥¹
+CPUID ¥Ç¥Ð¥¤¥¹¤ò»ØÄꤹ¤ë¡£¥Ç¥£¥Õ¥©¥ë¥È¤Î CPUID ¥Ç¥Ð¥¤¥¹¤Ï
+.BR /dev/cpu/0/cpuid
+¤Ç¤¢¤ë¡£
+.TP
+.\" -m device
+.\" Set the MSR device.  The default MSR device is
+.\" .BR /dev/cpu/0/msr .
+-m ¥Ç¥Ð¥¤¥¹
+MSR ¥Ç¥Ð¥¤¥¹¤ò»ØÄꤹ¤ë¡£¥Ç¥£¥Õ¥©¥ë¥È¤Î MSR ¥Ç¥Ð¥¤¥¹¤Ï
+.BR /dev/cpu/0/msr .
+¤Ç¤¢¤ë¡£
+.TP
+.\" -h
+.\" Print help.
+-h
+¥Ø¥ë¥×¤Îɽ¼¨
+.TP
+.\" -l
+.\" List LongRun information about available performance levels for
+.\" the CPU.
+-l
+CPU ¤Î¥Ñ¥Õ¥©¡¼¥Þ¥ó¥¹¥ì¥Ù¥ë¤Ë´Ø¤¹¤ë LongRun ¾ðÊó¤òɽ¼¨¤¹¤ë¡£
+.RS 7
+.TP
+.\" The following values are reported on all Transmeta CPUs that \
+.\" implement LongRun.
+LongRun ¤ò¼ÂÁõ¤·¤Æ¤¤¤ëÁ´¤Æ¤Î Transmeta CPU ¤Ç¤Ï°Ê²¼¤ÎÃͤ¬Êó¹ð¤µ¤ì¤ë¡£
+.RS 3
+.TP
+%
+.\" An available performance level, expressed as a percentage of range of
+.\" available core CPU frequencies.  0 corresponds to the lowest available
+.\" frequency and 100 corresponds to the highest.
+¤½¤Î CPU ¤¬¼Â¸½²Äǽ¤Ê(ºÇÂç)CPU ¥³¥¢¥¯¥í¥Ã¥¯¤ËÂФ¹¤ë³ä¹ç¤È¤·¤Æɽ¤µ¤ì¤ë
+Ê¿¶Ñ¥Ñ¥Õ¥©¡¼¥Þ¥ó¥¹¥ì¥Ù¥ë¡£0 ¤¬¼Â¸½²Äǽ¤Ê¤â¤Ã¤È¤âÄ㤤 CPU ¥¯¥í¥Ã¥¯¤Ë
+Âбþ¤·¡¢100 ¤¬¤â¤Ã¤È¤â¹â¤¤ CPU ¥¯¥í¥Ã¥¯¤ËÂбþ¤¹¤ë¡£
+.TP
+.\" MHz
+.\" The core CPU frequency at that level.
+MHz
+¤½¤Î¥ì¥Ù¥ë¤Î CPU ¥³¥¢¥¯¥í¥Ã¥¯
+.TP
+.\" Volts
+.\" The core CPU voltage at that level.
+ÅÅ°µ
+¤½¤Î¥ì¥Ù¥ë¤Î CPU ¥³¥¢ÅÅ°µ
+.TP
+.\" usage
+.\" The power usage relative to the maximum performance level.
+»ÈÍÑΨ
+ºÇÂç¥Ñ¥Õ¥©¡¼¥Þ¥ó¥¹¥ì¥Ù¥ë¤ËÂФ¹¤ëÅŸ»»ÈÍѤγä¹ç
+.RE
+.RE
+.TP
+.\" -p
+.\" Print current LongRun settings and status: whether LongRun is enabled,
+.\" whether LongRun Thermal Extensions are active, the current LongRun
+.\" performance window (expressed as a percentile range), the current
+.\" LongRun performance level (expressed as a percentile), and the current
+.\" LongRun flags.
+-p
+¸½ºß¤Î LongRun ÀßÄê¤È¥¹¥Æ¡¼¥¿¥¹¤òɽ¼¨¤¹¤ë¡£LongRun ¤¬Í­¸ú¤Ë
+¤Ê¤Ã¤Æ¤¤¤ë¤«¤É¤¦¤«¡¢LongRun Thermal Extension ¤¬Í­¸ú¤Ë¤Ê¤Ã¤Æ¤ë¤«¤É¤¦¤«¡¢
+(¥Ñ¡¼¥»¥ó¥Æ¡¼¥¸¤Î¥ì¥ó¥¸¤È¤·¤Æɽ¤µ¤ì¤ë)¸½ºß¤Î LongRun
+¥Ñ¥Õ¥©¡¼¥Þ¥ó¥¹¥¦¥£¥ó¥É¡¢(¥Ñ¡¼¥»¥ó¥Æ¡¼¥¸¤È¤·¤Æɽ¤µ¤ì¤ë)¸½ºß¤Î
+LongRun ¥Ñ¥Õ¥©¡¼¥Þ¥ó¥¹¥ì¥Ù¥ë¡¢¸½ºß¤Î LongRun ¥Õ¥é¥°¤¬¼¨¤µ¤ì¤ë¡£
+.TP
+.\" -v
+.\" Be more verbose.
+-v
+¤è¤ê¿¤¯¤Î¾ðÊó¤ò½ÐÎϤ¹¤ë(verbose ¥â¡¼¥É)
+.TP
+.\" -f flag
+.\" Set a LongRun mode flag.  Currently, the two supported flags are
+.\" .B performance
+.\" and
+.\" .BR economy .
+.\" This controls whether the processor is in "performance mode" or
+.\" "economy mode".
+-f ¥Õ¥é¥°
+LongRun ¥â¡¼¥É¥Õ¥é¥°¤ò¥»¥Ã¥È¤¹¤ë¡£¸½ºß¤Ï
+.B performance
+¤È
+.B economy
+¤ÎÆó¤Ä¤Î¥Õ¥é¥°¤¬¥µ¥Ý¡¼¥È¤µ¤ì¤Æ¤¤¤ë¡£
+¤³¤ì¤Ï¡¢¥×¥í¥»¥Ã¥µ¤¬ "¥Ñ¥Õ¥©¡¼¥Þ¥ó¥¹¥â¡¼¥É(performance mode)"¤Ç
+Æ°ºî¤¹¤ë¤«¡¢"¥¨¥³¥Î¥ß¡¼¥â¡¼¥É(economy mode)"¤ÇÆ°ºî¤¹¤ë¤«¤ò
+À©¸æ¤¹¤ë¡£
+.TP
+.\" -s low high
+.\" Set the current LongRun performance window as a percentile range.  The
+.\" low number cannot be greater than the high number.  The minimum and
+.\" maximum performance values accepted by the CPU are 0 and 100,
+.\" respectively.
+-s ²¼¸ÂÃÍ(%) ¾å¸ÂÃÍ(%)
+¸½ºß¤Î LongRun ¥Ñ¥Õ¥©¡¼¥Þ¥ó¥¹¥¦¥£¥ó¥É¤ò¥Ñ¡¼¥»¥ó¥Æ¡¼¥¸¤Çɽ¤µ¤ì¤ëÎΰè¤Ë
+¥»¥Ã¥È¤¹¤ë¡£²¼¸ÂÃͤϾå¸ÂÃͤò¾å²ó¤Ã¤Æ¤Ï¤¤¤±¤Ê¤¤¡£CPU ¤¬¼õ¤±ÉÕ¤±¤ë
+¥Ñ¥Õ¥©¡¼¥Þ¥ó¥¹Ãͤξå¸Â¤ª¤è¤Ó²¼¸Â¤Ï 0(%) ¤«¤é 100(%) ¤Ç¤¢¤ë¡£
+.\" .SH ENVIRONMENT
+.\" No environment variables are used.
+.SH ´Ä¶­ÊÑ¿ô
+´Ä¶­ÊÑ¿ô¤Ï»²¾È¤·¤Ê¤¤¡£
+.\" .SH FILES
+.SH ¥Õ¥¡¥¤¥ë
+.\" This program requires that the Linux CPUID and MSR devices be compiled
+.\" into the kernel (or loaded as kernel modules), that the CPUID character
+.\" device be readable, and that the MSR character device be both readable
+.\" and writable.
+¤³¤Î¥×¥í¥°¥é¥à¤Ï Linux CPUID ¥Ç¥Ð¥¤¥¹¤È MSR ¥Ç¥Ð¥¤¥¹¤¬ ¥«¡¼¥Í¥ë¤Ë
+ÁȤ߹þ¤Þ¤ì¤Æ¤ª¤ê(¤â¤·¤¯¤Ï ¥«¡¼¥Í¥ë¥â¥¸¥å¡¼¥ë¤È¤·¤Æ¥í¡¼¥É¤µ¤ì¤Æ¤ª¤ê)¡¢
+CPUID ¥­¥ã¥é¥¯¥¿¥Ç¥Ð¥¤¥¹¤¬Æɤ߹þ¤ß²Äǽ¡¢¤½¤·¤Æ¡¢MSR ¥­¥ã¥é¥¯¥¿¥Ç¥Ð¥¤¥¹
+¤¬Æɤ߽ñ¤­²Äǽ¤Ç¤¢¤ëɬÍפ¬¤¢¤ë¡£
+.\" .SH "SEE ALSO"
+.SH ´ØÏ¢¹àÌÜ
+.BR acpid (8),
+.BR apmd (8),
+.BR hdparm (8)
+.\" .SH AUTHOR
+.SH Ãø¼Ô
+Daniel Quinlan <[e-mail]>
+
+(ÆüËܸìÌõ ÀÐÀî ËÓ <[e-mail]>)
--- longrun-0.9.orig/Makeconfig
+++ longrun-0.9/Makeconfig
@@ -0,0 +1,8 @@
+PACKAGE=longrun
+
+PREFIX=/usr
+BINDIR=$(PREFIX)/bin
+DATADIR=$(PREFIX)/share
+
+MANDIR=$(DATADIR)/man
+LOCALEDIR=$(DATADIR)/locale