xorg.conf

xorg.conf (text/plain), 5.13 KB, created by Etaoin Shrdlu on 2010-07-04 09:05:33 UTC

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
#	FontPath     "/usr/share/fonts/misc/"
#	FontPath     "/usr/share/fonts/TTF/"
#	FontPath     "/usr/share/fonts/Speedo/"
#	FontPath     "/usr/share/fonts/Type1/"
#	FontPath     "/usr/share/fonts/CID/"
#	FontPath     "/usr/share/fonts/75dpi/"
#	FontPath     "/usr/share/fonts/100dpi/"
	FontPath     "unix/:-1"
EndSection

Section "Module"
	Load  "dbe"
	Load  "glx"
	Load  "dri"
	Load  "GLcore"
	Load  "record"
	Load  "extmod"

#  SubSection "extmod"
#    Option "omit xfree86-dga"
#	EndSubSection
	
#	Load  "xtrap"
#	Load  "speedo"
	Load  "type1"
	Load  "freetype"
EndSection

Section "dri"
  Mode 0666
EndSection

Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"
EndSection				

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option      "XkbModel"  "pc104"
	Option      "XkbLayout"  "it"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
#	Option	    "Protocol" "auto"
  Option      "Protocol"  "ExplorerPS/2"
#	Option	    "Device" "/dev/mouse"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping"  "4 5"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

# === Xorg radeon open source driver ==============

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "ForcePCIMode"       	# [<bool>]
        #Option     "BusType"            	# [<str>]
        #Option     "CPPIOMode"          	# [<bool>]
        #Option     "CPusecTimeout"      	# <i>
#        Option      "AGPMode" "4"
#        Option      "AGPFastWrite" "On"
        #Option     "AGPSize"            	# <i>
        #Option     "GARTSize"           	# <i>
        #Option     "RingSize"           	# <i>
        #Option     "BufferSize"         	# <i>
        #Option     "EnableDepthMoves"   	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "NoBackBuffer"       	# [<bool>]
        #Option     "DRIReinit"          	# [<bool>]
        #Option     "PanelOff"           	# [<bool>]
        #Option     "DDCMode"            	# [<bool>]
        #Option     "MonitorLayout"      	# [<str>]
        #Option     "IgnoreEDID"         	# [<bool>]
        #Option     "OverlayOnCRTC2"     	# [<bool>]
        #Option     "CloneMode"          	# [<str>]
        #Option     "CloneHSync"         	# [<str>]
        #Option     "CloneVRefresh"      	# [<str>]
        #Option     "UseFBDev"           	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "DisplayPriority"    	# [<str>]
        #Option     "PanelSize"          	# [<str>]
        #Option     "ForceMinDotClock"   	# <freq>
	Identifier  "Card0"
	Driver      "ati"
#	Driver      "radeon"
	VendorName  "ATI Technologies Inc"
	BoardName   "RV350 [Mobility Radeon 9600 M10]"
	BusID       "PCI:1:0:0"
EndSection


Section "Extensions"
    Option  "Composite"  "Enable"
EndSection


Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
#  Device     "ATI Graphics Adapter"
	Monitor    "Monitor0"
	
	defaultDepth 24
	
#	SubSection "Display"
#		Viewport   0 0
#		Depth     1
#	EndSubSection
#	SubSection "Display"
#		Viewport   0 0
#		Depth     4
#	EndSubSection
#	SubSection "Display"
#		Viewport   0 0
#		Depth     8
#	EndSubSection
#	SubSection "Display"
#		Viewport   0 0
#		Depth     15
#	EndSubSection
#	SubSection "Display"
#		Viewport   0 0
#		Depth     16
#	EndSubSection
#	SubSection "Display"
#		Viewport   0 0
#		Depth     24
#	EndSubSection
EndSection